summaryrefslogtreecommitdiff
path: root/usrp2
AgeCommit message (Collapse)Author
2009-09-04allow control of whether or not to honor flow control, adds some debug linesMatt Ettus
2009-09-04debug the rx sideMatt Ettus
2009-09-04no longer used, replaced by newfifo versionMatt Ettus
2009-09-04Merge branch 'new_eth' of http://gnuradio.org/git/eb into new_ethMatt Ettus
2009-09-04remove special last_line adjustment from ethernet portEric Blossom
2009-09-04Merge branch 'new_eth' of http://gnuradio.org/git/eb into new_ethMatt Ettus
2009-09-04Firmware now inserts mac source address value in each frame.Eric Blossom
The old mac used to do this automatically.
2009-09-04properly set the address filterMatt Ettus
2009-09-04Merge branch 'new_eth' of http://gnuradio.org/git/matt into new_ethEric Blossom
* 'new_eth' of http://gnuradio.org/git/matt: seems to build a decent fpga, but still some issues with a full connection.
2009-09-04Merge branch 'master' into new_ethMatt Ettus
2009-09-04stop sending short ethernet command packets.Eric Blossom
2009-09-04Fix problem with commands timing out (specifically stop_rx_streaming)Eric Blossom
After fixing the race, this change uses Tom's idea to stop enqueuing data when trying to stop, and adds a new flush_rx_samples method to drop any samples that may have already been accumulated. I ran Tom's test case 500 times with 0 failures ;-)
2009-09-04Fix race condition that caused commands such as stop_rx_streaming to fail.Eric Blossom
This fixes the bulk of the problem. Next step is to drop data packets while waiting for the reply.
2009-09-04stop sending short ethernet command packets.Eric Blossom
2009-09-04Fix problem with commands timing out (specifically stop_rx_streaming)Eric Blossom
After fixing the race, this change uses Tom's idea to stop enqueuing data when trying to stop, and adds a new flush_rx_samples method to drop any samples that may have already been accumulated. I ran Tom's test case 500 times with 0 failures ;-)
2009-09-04Fix race condition that caused commands such as stop_rx_streaming to fail.Eric Blossom
This fixes the bulk of the problem. Next step is to drop data packets while waiting for the reply.
2009-09-03seems to build a decent fpga, but still some issues with a full connection.Matt Ettus
2009-09-03removed hard-coded link_is_up = true;Eric Blossom
2009-09-03MAC transmit seems to work now. The root cause of the problem was ↵Matt Ettus
accidentally using the rx_clk in one stage of the fifos on the tx side.
2009-09-03set device to xc3s2000. Shouldn't make any differences.Matt Ettus
2009-09-03misc ignoresMatt Ettus
2009-09-03made a new block ram based fifo, 64 (65) elements long, all fifos now have ↵Matt Ettus
"enhanced level logic" for accurate fullness. Maybe this will help...
2009-09-02bring the testbench files up to dateMatt Ettus
2009-09-02major cleanup of 2 clock fifosMatt Ettus
2009-09-02cleaning up the new fifosMatt Ettus
2009-09-02cascadefifo.v wasn't used, only the double cascade version. fifo_2clock.v ↵Matt Ettus
and fifo_2clock.v are empty
2009-09-02never used, not neededMatt Ettus
2009-09-02ignore .o filesMatt Ettus
2009-09-02debug pins, cleaned ignoresMatt Ettus
2009-09-02sort out active-low lines on locallink fifos, added debug pinsMatt Ettus
2009-09-02Removed these files completely, they were for the old style of fifosMatt Ettus
2009-09-02Expand frequency ranges to match hardware capability.Johnathan Corgan
* Corresponds to SVN r11620:11622 * Fixes ticket 405 Reported-by: Dimitris Symeonidis <azimout@gmail.com> Fixed-by: Matt Ettus <matt@ettus.com>
2009-09-01fixed addressing of registers, and added write enables to those that were ↵Matt Ettus
missing. MDIO seems ok.
2009-09-01tell s/w link is up. additional debugging outputEric Blossom
2009-08-31Merged SVN matt/new_eth r10782:11633 into new_ethJohnathan Corgan
* svn diff http://gnuradio.org/svn/branches/developers/matt/new_eth -r10782:11633 * Patch applied with no conflicts or fuzz.
2009-08-14Added git ignore files auto created from svn:ignore properties.git
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11592 221aa14e-8319-0410-a670-987f0aec2ac5
2009-08-02Made libusrp2 min and max samples even number.jcorgan
This forces an even number of samples in the min or max case, preserving the alignment of interleaved samples in the face of RX overruns or TX underruns. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11526 221aa14e-8319-0410-a670-987f0aec2ac5
2009-07-30Add custom FPGA build.jcorgan
This is a custom build for USRP2 FPGA. It allows using a BasicRX or LFRX board and feed two independent, real signals. In addition, instead of the CIC/HB decimator, which optimizes frequency response, it uses an integrate and dump decimator, which optimizes for time-domain impulse response. These changes have been made in dsp_core_rx.v: * A second DDC has been added, sharing a frequency register with the existing DDC. * The output of the two DDCs are interleaved as I1 Q1 I2 Q2I ... into the receive FIFO. This limits the host configured decimation to 8 intead of 4. Use gr.deinterleave to recover the streams. * The ADCs are hardcoded: RX_A ==> DDC #1 I-input 0 ==> DDC #1 Q-input RX_B ==> DDC #2 I-input 0 ==> DDC #2 Q-input Thus, the input mux has been disabled. * The CIC/HB decimator has been replaced by an integrate and dump at the decimation rate. * To assist with meeting timing, the external RAM has been disabled. The basic application is to coherently sample two real IF streams and downconvert to baseband, while minimizing the impulse response duration of the resampling filters. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11519 221aa14e-8319-0410-a670-987f0aec2ac5
2009-06-23added include <cstdio> statements in several files to make it compatible ↵anastas
with g++ 4.4 git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11267 221aa14e-8319-0410-a670-987f0aec2ac5
2009-06-221 is for hardware control of leds, 0 is for softwarematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11261 221aa14e-8319-0410-a670-987f0aec2ac5
2009-06-19test for clock lockingmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11241 221aa14e-8319-0410-a670-987f0aec2ac5
2009-06-19test for clock lockmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11240 221aa14e-8319-0410-a670-987f0aec2ac5
2009-06-19allow the choice of automatic (hardware) control of ledsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11239 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-29remove dbsm to make room in flashmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11164 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-28handle clocks on both version 3 and version 4 boards, cleaned up the apimatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11160 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-25move i2c init and get_hw_rev before clocks_init because the clock init code ↵matt
needs to know our rev git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11122 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-25remove unneeded include filematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11121 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-25remove printfs to save space. matt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11120 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-25remove unneeded includematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11119 221aa14e-8319-0410-a670-987f0aec2ac5
2009-05-25remove EEPROM setting, complete tests even if SD failsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11118 221aa14e-8319-0410-a670-987f0aec2ac5