| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2009-11-04 | This branch is for porting from the quad radio, and minor text cleanups | Matt Ettus | |
| The counter is for performance monitoring in firmware, priority encoder and new interrupt controller are from quad radio and speed up interrupts. This is tested and it works for me. | |||
| 2009-10-11 | earliest beta files renamed to avoid confusion | Matt Ettus | |
| 2009-10-05 | Properly reset the fifos. We didn't connect before. | Matt Ettus | |
| 2009-10-01 | Merge branch 'new_eth' of http://gnuradio.org/git/matt into master | Johnathan Corgan | |
| * 'new_eth' of http://gnuradio.org/git/matt: (42 commits) Fix warnings, mostly from implicitly defined wires or unspecified widths fullchip sim now compiles again, after moving eth and models over to new simple_gemac remove unused opencores remove debugging code no idea where this came from, it shouldn't be here Copied wb_1master back from quad radio Remove old mac. Good riddance. remove unused port More xilinx fifos, more clean up of our fifos might as well use a cascade fifo to help timing and give a little more capacity fix a typo which caused tx glitches Untested fixes for getting serdes onto the new fifo system. Compiles, at least Implement Eth flow control using pause frames parameterized fifo sizes, some reformatting remove unused old style fifo allow control of whether or not to honor flow control, adds some debug lines debug the rx side no longer used, replaced by newfifo version remove special last_line adjustment from ethernet port Firmware now inserts mac source address value in each frame. ... | |||
| 2009-10-01 | Fix warnings, mostly from implicitly defined wires or unspecified widths | Matt Ettus | |
| 2009-10-01 | fullchip sim now compiles again, after moving eth and models over to new ↵ | Matt Ettus | |
| simple_gemac | |||
| 2009-10-01 | remove unused opencores | Matt Ettus | |
| 2009-09-30 | remove debugging code | Matt Ettus | |
| 2009-09-30 | Merge branch 'new_wb_intercon' into new_eth | Matt Ettus | |
| Functionality should not change at all Conflicts: usrp2/fpga/top/u2_core/u2_core.v | |||
| 2009-09-30 | no idea where this came from, it shouldn't be here | Matt Ettus | |
| 2009-09-30 | Copied wb_1master back from quad radio | Matt Ettus | |
| more sane config options, should be exactly the same memory map | |||
| 2009-09-29 | Enable pps interrupts. Not sure why they were disabled in the first place. | Matt Ettus | |
| 2009-09-24 | Merge commit 'origin' into new_eth | Matt Ettus | |
| Conflicts: .gitignore | |||
| 2009-09-24 | Merge branch 'rx_mimo_hb_sync' of http://gnuradio.org/git/matt | Johnathan Corgan | |
| * 'rx_mimo_hb_sync' of http://gnuradio.org/git/matt: Synchronize the internal phase of the halfband filters to the | |||
| 2009-09-24 | Synchronize the internal phase of the halfband filters to the | Matt Ettus | |
| start of the "run" signal. This is important for MIMO. Bug reported by Christoph Hein and Hanwen . | |||
| 2009-09-20 | Merge branch 'serdes_newfifo' into new_eth | Matt Ettus | |
| 2009-09-17 | configure.gnu needs to unset more vars from the environment. | Philip Balister | |
| This solves a problem running the usrp2/firmware configure script when the USB_* vars are set in the environment. Long term fix is to have the configure.gnu wrapper make sure the quoting is OK for vars passed on. | |||
| 2009-09-11 | add u2_flash_tool to EXTRA_DIST | Eric Blossom | |
| 2009-09-10 | Remove old mac. Good riddance. | Matt Ettus | |
| 2009-09-10 | remove unused port | Matt Ettus | |
| 2009-09-10 | More xilinx fifos, more clean up of our fifos | Matt Ettus | |
| 2009-09-10 | might as well use a cascade fifo to help timing and give a little more capacity | Matt Ettus | |
| 2009-09-05 | fix a typo which caused tx glitches | Matt Ettus | |
| 2009-09-04 | Untested fixes for getting serdes onto the new fifo system. Compiles, at least | Matt Ettus | |
| 2009-09-04 | Implement Eth flow control using pause frames | Matt Ettus | |
| Not fully tested, but it seems to work without frame errors, sequence number errors or ethernet overruns. Still of course will get tx underruns on a slow machine, and the transmitted signal has some issues though. | |||
| 2009-09-04 | parameterized fifo sizes, some reformatting | Matt Ettus | |
| 2009-09-04 | remove unused old style fifo | Matt Ettus | |
| 2009-09-04 | allow control of whether or not to honor flow control, adds some debug lines | Matt Ettus | |
| 2009-09-04 | debug the rx side | Matt Ettus | |
| 2009-09-04 | no longer used, replaced by newfifo version | Matt Ettus | |
| 2009-09-04 | Merge branch 'new_eth' of http://gnuradio.org/git/eb into new_eth | Matt Ettus | |
| 2009-09-04 | remove special last_line adjustment from ethernet port | Eric Blossom | |
| 2009-09-04 | Merge branch 'new_eth' of http://gnuradio.org/git/eb into new_eth | Matt Ettus | |
| 2009-09-04 | Firmware now inserts mac source address value in each frame. | Eric Blossom | |
| The old mac used to do this automatically. | |||
| 2009-09-04 | properly set the address filter | Matt Ettus | |
| 2009-09-04 | Merge branch 'new_eth' of http://gnuradio.org/git/matt into new_eth | Eric Blossom | |
| * 'new_eth' of http://gnuradio.org/git/matt: seems to build a decent fpga, but still some issues with a full connection. | |||
| 2009-09-04 | Merge branch 'master' into new_eth | Matt Ettus | |
| 2009-09-04 | stop sending short ethernet command packets. | Eric Blossom | |
| 2009-09-04 | Fix problem with commands timing out (specifically stop_rx_streaming) | Eric Blossom | |
| After fixing the race, this change uses Tom's idea to stop enqueuing data when trying to stop, and adds a new flush_rx_samples method to drop any samples that may have already been accumulated. I ran Tom's test case 500 times with 0 failures ;-) | |||
| 2009-09-04 | Fix race condition that caused commands such as stop_rx_streaming to fail. | Eric Blossom | |
| This fixes the bulk of the problem. Next step is to drop data packets while waiting for the reply. | |||
| 2009-09-04 | stop sending short ethernet command packets. | Eric Blossom | |
| 2009-09-04 | Fix problem with commands timing out (specifically stop_rx_streaming) | Eric Blossom | |
| After fixing the race, this change uses Tom's idea to stop enqueuing data when trying to stop, and adds a new flush_rx_samples method to drop any samples that may have already been accumulated. I ran Tom's test case 500 times with 0 failures ;-) | |||
| 2009-09-04 | Fix race condition that caused commands such as stop_rx_streaming to fail. | Eric Blossom | |
| This fixes the bulk of the problem. Next step is to drop data packets while waiting for the reply. | |||
| 2009-09-03 | seems to build a decent fpga, but still some issues with a full connection. | Matt Ettus | |
| 2009-09-03 | removed hard-coded link_is_up = true; | Eric Blossom | |
| 2009-09-03 | MAC transmit seems to work now. The root cause of the problem was ↵ | Matt Ettus | |
| accidentally using the rx_clk in one stage of the fifos on the tx side. | |||
| 2009-09-03 | set device to xc3s2000. Shouldn't make any differences. | Matt Ettus | |
| 2009-09-03 | misc ignores | Matt Ettus | |
| 2009-09-03 | made a new block ram based fifo, 64 (65) elements long, all fifos now have ↵ | Matt Ettus | |
| "enhanced level logic" for accurate fullness. Maybe this will help... | |||
| 2009-09-02 | bring the testbench files up to date | Matt Ettus | |
 |
index : gnuradio/.git | |
| GNU Radio fork v3.6 |
| summaryrefslogtreecommitdiff |