Age | Commit message (Collapse) | Author |
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10183 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
usrp2.sink_32fc results in full-scale DAC outputs, regardless of interpolation
rate.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10182 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10181 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10176 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10175 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10174 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Wishbone bus. Minor fix for USRP2 sync_to_pps() (uses correct packet type.)
Example:
>>> from gnuradio import usrp2
>>> u = usrp2.source_32fc()
>>> u.peek(0x1234, 4) # Read four bytes at offset 0x1234 (code)
(185, 244, 253, 164)
>>>
The return value will be zero length upon error.
The read address must be 32-bit aligned, and only the lower 16 bits are
significant. The length must be an integral multiple of 4 bytes. There is
currently a read limit of 176 bytes per read; to change requires some additional
firmware changes to allocate a larger reply packet.
WARNING: Trying to read from memory locations not serviced by RAM or by a
Wishbone peripheral may result in a hang requiring a USRP2 power cycle. The
USRP2 internal memory map is documented in usrp2/firmware/lib/memory_map.h.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10172 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
fully native C++ API for the USRP.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10165 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10125 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10120 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10119 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10118 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10117 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10116 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10115 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10109 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10108 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
units without MIMO connections
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10103 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10102 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10101 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9999 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9998 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9997 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9963 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9962 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9961 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9959 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9941 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9901 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
streaming problem. You can now set the frequency in usrp2_fft.py
while streaming without dying :-)
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9878 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9877 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9874 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9873 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9861 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Still a problem setting the gain; Firmware takes too long to get back
to service ethernet.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9860 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
the latest changes in libusrp2, adding all the daughterboard accessor functions.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9856 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9844 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9831 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9820 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9819 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
-r9804:9814 into trunk; initialized dacmux in firmware.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9816 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9815 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9807 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9798 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Modified dsp_core_rx.v to swap A and B mapping so that the software
thinks that the TVRX is connected to A/D A.
ISE 10.1 SP3 is required to compile the FPGA successfully. SP2 is
insufficient. It compiles with SP2, but the firmware doesn't load.
Only the F led is one in that case.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9795 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9792 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9791 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9790 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9789 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9788 221aa14e-8319-0410-a670-987f0aec2ac5
|