summaryrefslogtreecommitdiff
path: root/usrp2/host/lib/usrp2_impl.h
AgeCommit message (Collapse)Author
2010-02-25Added call to set antenna. Split XCVR into new thing cuz size.Josh Blum
2009-12-03Rebase on master, cleanup for mergeJohnathan Corgan
Trailing whitespace removal Copyright updates
2009-12-03Applied 'start streaming at' patch from Douglas GeigerJohnathan Corgan
2009-09-04Fix problem with commands timing out (specifically stop_rx_streaming)Eric Blossom
After fixing the race, this change uses Tom's idea to stop enqueuing data when trying to stop, and adds a new flush_rx_samples method to drop any samples that may have already been accumulated. I ran Tom's test case 500 times with 0 failures ;-)
2009-09-04Fix race condition that caused commands such as stop_rx_streaming to fail.Eric Blossom
This fixes the bulk of the problem. Next step is to drop data packets while waiting for the reply.
2009-05-11Apply Juha Vierinen patch to allow variable USRP2 rx buffer sizejcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11000 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-09Fixes ticket:357jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10793 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-04Merged r10712:10765 from jcorgan/gpio into trunk. Adds out-of-band and ↵jcorgan
streaming GPIO functions for USRP2. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10766 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-23Cleanup, changed ifc_name() to interface_name()jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10477 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-22Adds ifc_name() to libusrp2 and gr-usrp2jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10475 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-10Merged r10418:10423 from jcorgan/pps into trunk. Adds usrp2::sync_every_ppsjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10424 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-04Merged r10383:10390 from jcorgan/u2-wip into trunk.jcorgan
* Implements daughterboard independent LO offset tuning * Removes RFX specific LO offset code * Adds 'set_lo_offset' to libusrp2 and Python API * Adds --lo-offset to usrp2_fft.py and usrp2_rx_cfile.py * Ensures daughterboards are reset to default values at startup. Trunk passes distcheck. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10392 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-31For USRP2, implement auto scaling of TX pipeline such that [-1.0 1.0] input tojcorgan
usrp2.sink_32fc results in full-scale DAC outputs, regardless of interpolation rate. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10182 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-29Implements USRP2 poke32() command.jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10176 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-28Replaced USRP2 peek() with peek32(), handles endian-swapping if neededjcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10174 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-27Implements USRP2 peek() command, allowing arbitrary reads from the internaljcorgan
Wishbone bus. Minor fix for USRP2 sync_to_pps() (uses correct packet type.) Example: >>> from gnuradio import usrp2 >>> u = usrp2.source_32fc() >>> u.peek(0x1234, 4) # Read four bytes at offset 0x1234 (code) (185, 244, 253, 164) >>> The return value will be zero length upon error. The read address must be 32-bit aligned, and only the lower 16 bits are significant. The length must be an integral multiple of 4 bytes. There is currently a read limit of 176 bytes per read; to change requires some additional firmware changes to allocate a larger reply packet. WARNING: Trying to read from memory locations not serviced by RAM or by a Wishbone peripheral may result in a hang requiring a USRP2 power cycle. The USRP2 internal memory map is documented in usrp2/firmware/lib/memory_map.h. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10172 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-14Implement sync_to_pps command for USRP2jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10116 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-27backed out 9874eb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9877 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-27An insufficient attempt to fix the set_freq problem...eb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9874 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-22added rx_decim and tx_interp accessorseb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9819 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-22Added methods to query daughterboard parameters. Merged eb/u2-wip2eb
-r9804:9814 into trunk; initialized dacmux in firmware. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9816 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-24Renamed identifiers for consistency: s/complex_float/32fc/ s/complex_16/16sc/. eb
Merged eb/u2-wip -r9645:9646 into trunk. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9647 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-08Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and ↵jcorgan
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
generated by cgit (git 2.34.1) at 2024-12-22 08:09:23 +0000