summaryrefslogtreecommitdiff
path: root/usrp2/fpga
AgeCommit message (Collapse)Author
2008-10-22make rev2 compile againmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9815 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-18added in mux for DACsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9807 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-15Added firmware support for adc_mux to handle swapping I/Q, etc.eb
Modified dsp_core_rx.v to swap A and B mapping so that the software thinks that the TVRX is connected to A/D A. ISE 10.1 SP3 is required to compile the FPGA successfully. SP2 is insufficient. It compiles with SP2, but the firmware doesn't load. Only the F led is one in that case. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9795 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-11New serdes status interrupt, clk_status interrupt. New capability to flush ↵matt
the ICache. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9779 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-08moved to appropriate placesmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9747 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-08added the basic wb<-->extram interface and a serdes interrupt to tell link ↵matt
status git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9746 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-21catch up with latest pin defs of u2_corematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9636 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-21attach a 16 bit device to the bus and make it look like a 32 bit devicematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9635 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-21wb_zbt16_b is a quick hack just to be able to safely check the sram. it is ↵matt
not speed-optimized git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9633 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-21new directory for filesmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9632 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-21zbt ram controllermatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9631 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-19first cutmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9609 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-17better debug pinsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9592 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-17allow fpga to take over sd card interface from cpldmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9591 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-17allow fpga to take over SD card interfacematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9590 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-17control CS line on SD cardmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9589 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-11Merged r9505:9553 from old usrp2/trunk into trunk/usrp2jcorgan
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9555 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-08Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and ↵jcorgan
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
generated by cgit (git 2.34.1) at 2024-12-22 16:42:00 +0000