Age | Commit message (Collapse) | Author |
|
|
|
simple_gemac
|
|
|
|
Functionality should not change at all
Conflicts:
usrp2/fpga/top/u2_core/u2_core.v
|
|
|
|
more sane config options, should be exactly the same memory map
|
|
Conflicts:
.gitignore
|
|
start of the "run" signal. This is important for MIMO. Bug
reported by Christoph Hein and Hanwen .
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Not fully tested, but it seems to work without frame errors, sequence
number errors or ethernet overruns. Still of course will get tx underruns
on a slow machine, and the transmitted signal has some issues though.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
accidentally using the rx_clk in one stage of the fifos on the tx side.
|
|
|
|
|
|
"enhanced level logic" for accurate fullness. Maybe this will help...
|
|
|
|
|
|
|
|
and fifo_2clock.v are empty
|
|
|
|
|
|
|
|
|
|
missing. MDIO seems ok.
|
|
* svn diff http://gnuradio.org/svn/branches/developers/matt/new_eth
-r10782:11633
* Patch applied with no conflicts or fuzz.
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11592 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
This is a custom build for USRP2 FPGA. It allows using a BasicRX or
LFRX board and feed two independent, real signals. In addition, instead
of the CIC/HB decimator, which optimizes frequency response, it uses an
integrate and dump decimator, which optimizes for time-domain impulse
response.
These changes have been made in dsp_core_rx.v:
* A second DDC has been added, sharing a frequency register with
the existing DDC.
* The output of the two DDCs are interleaved as I1 Q1 I2 Q2I ...
into the receive FIFO. This limits the host configured decimation
to 8 intead of 4. Use gr.deinterleave to recover the streams.
* The ADCs are hardcoded:
RX_A ==> DDC #1 I-input
0 ==> DDC #1 Q-input
RX_B ==> DDC #2 I-input
0 ==> DDC #2 Q-input
Thus, the input mux has been disabled.
* The CIC/HB decimator has been replaced by an integrate and dump at
the decimation rate.
* To assist with meeting timing, the external RAM has been disabled.
The basic application is to coherently sample two real IF streams and
downconvert to baseband, while minimizing the impulse response duration
of the resampling filters.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11519 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10926 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
FPGA build to use integrate-and-dump decimator instead of CIC/HB combination. This provides a much shorter time duration impulse response for the same decimation rate, at the expense of worse stop-band rejection.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10888 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10814 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10813 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10779 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10769 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
streaming GPIO functions for USRP2.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10766 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10762 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10761 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10760 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10759 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
an overrun. ERROR_2 changed to ERROR2.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10751 221aa14e-8319-0410-a670-987f0aec2ac5
|