Age | Commit message (Collapse) | Author |
|
Conflicts:
.gitignore
|
|
start of the "run" signal. This is important for MIMO. Bug
reported by Christoph Hein and Hanwen .
|
|
|
|
* svn diff http://gnuradio.org/svn/branches/developers/matt/new_eth
-r10782:11633
* Patch applied with no conflicts or fuzz.
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11592 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
This is a custom build for USRP2 FPGA. It allows using a BasicRX or
LFRX board and feed two independent, real signals. In addition, instead
of the CIC/HB decimator, which optimizes frequency response, it uses an
integrate and dump decimator, which optimizes for time-domain impulse
response.
These changes have been made in dsp_core_rx.v:
* A second DDC has been added, sharing a frequency register with
the existing DDC.
* The output of the two DDCs are interleaved as I1 Q1 I2 Q2I ...
into the receive FIFO. This limits the host configured decimation
to 8 intead of 4. Use gr.deinterleave to recover the streams.
* The ADCs are hardcoded:
RX_A ==> DDC #1 I-input
0 ==> DDC #1 Q-input
RX_B ==> DDC #2 I-input
0 ==> DDC #2 Q-input
Thus, the input mux has been disabled.
* The CIC/HB decimator has been replaced by an integrate and dump at
the decimation rate.
* To assist with meeting timing, the external RAM has been disabled.
The basic application is to coherently sample two real IF streams and
downconvert to baseband, while minimizing the impulse response duration
of the resampling filters.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11519 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
streaming GPIO functions for USRP2.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10766 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10357 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10258 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10257 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10256 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10115 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9807 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Modified dsp_core_rx.v to swap A and B mapping so that the software
thinks that the TVRX is connected to A/D A.
ISE 10.1 SP3 is required to compile the FPGA successfully. SP2 is
insufficient. It compiles with SP2, but the firmware doesn't load.
Only the F led is one in that case.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9795 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
|