gnuradio/.git - GNU Radio fork v3.6

Age	Commit message (Collapse)	Author
2009-05-25	move i2c init and get_hw_rev before clocks_init because the clock init code ↵	matt
	needs to know our rev git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11122 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-04	Merged r10712:10765 from jcorgan/gpio into trunk. Adds out-of-band and ↵	jcorgan
	streaming GPIO functions for USRP2. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10766 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-22	Added methods to query daughterboard parameters. Merged eb/u2-wip2	eb
	-r9804:9814 into trunk; initialized dacmux in firmware. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9816 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-15	Added firmware support for adc_mux to handle swapping I/Q, etc.	eb
	Modified dsp_core_rx.v to swap A and B mapping so that the software thinks that the TVRX is connected to A/D A. ISE 10.1 SP3 is required to compile the FPGA successfully. SP2 is insufficient. It compiles with SP2, but the firmware doesn't load. Only the F led is one in that case. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9795 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-14	new tx and rx mux registers	eb
	git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9789 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-12	refactored divider setting on rxdb clk, txdb clk, and test clk	matt
	git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9780 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-04	USRP2 firmware fixes for EDK 10.1 microblaze toolchain. Firmware now builds	eb
	and runs correctly using these tools. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9708 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-17	blink all leds, leave one on when done to say that firmware is running ok	matt
	git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9587 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-10	now reads h/w rev from eeprom. f/w app set_hw_rev sets it	eb
	git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9554 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-08	Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and ↵	jcorgan
	gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5