| Age | Commit message (Collapse) | Author |
|---|
|
* Implements daughterboard independent LO offset tuning
* Removes RFX specific LO offset code
* Adds 'set_lo_offset' to libusrp2 and Python API
* Adds --lo-offset to usrp2_fft.py and usrp2_rx_cfile.py
* Ensures daughterboards are reset to default values at
startup.
Trunk passes distcheck.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10392 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9873 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Still a problem setting the gain; Firmware takes too long to get back
to service ethernet.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9860 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9798 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Modified dsp_core_rx.v to swap A and B mapping so that the software
thinks that the TVRX is connected to A/D A.
ISE 10.1 SP3 is required to compile the FPGA successfully. SP2 is
insufficient. It compiles with SP2, but the firmware doesn't load.
Only the F led is one in that case.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9795 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
|
