summaryrefslogtreecommitdiff
path: root/usrp2/firmware/lib/db_rfx.c
AgeCommit message (Collapse)Author
2010-03-01set antenna defaults to 0Josh Blum
2009-09-02Expand frequency ranges to match hardware capability.Johnathan Corgan
* Corresponds to SVN r11620:11622 * Fixes ticket 405 Reported-by: Dimitris Symeonidis <azimout@gmail.com> Fixed-by: Matt Ettus <matt@ettus.com>
2009-05-25remove unneeded include filematt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11121 221aa14e-8319-0410-a670-987f0aec2ac5
2009-04-27somebody commented out the tx mux setting which prevented the xcvr2450 from ↵matt
working. wrong values for rfx boards were not seen because of the above error. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10925 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-04Merged r10383:10390 from jcorgan/u2-wip into trunk.jcorgan
* Implements daughterboard independent LO offset tuning * Removes RFX specific LO offset code * Adds 'set_lo_offset' to libusrp2 and Python API * Adds --lo-offset to usrp2_fft.py and usrp2_rx_cfile.py * Ensures daughterboards are reset to default values at startup. Trunk passes distcheck. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10392 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-02work in progress: setting gpio on xcvrjblum
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10375 221aa14e-8319-0410-a670-987f0aec2ac5
2008-12-17added frequency offset capability. Set to 12.5e6 on TX, 0 on RX for nowmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10125 221aa14e-8319-0410-a670-987f0aec2ac5
2008-11-16removed old python commentsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9999 221aa14e-8319-0410-a670-987f0aec2ac5
2008-11-16fixed gain calculations rfx900-2400matt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9998 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-27Minor cleanup. eb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9873 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-26Deadly printfs turned off... Specified gain ranges for TV Rx and RFX boards.eb
Still a problem setting the gain; Firmware takes too long to get back to service ethernet. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9860 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-14mark RFX boards as i_and_q_swappedeb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9791 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-14initialized freq_min/max valueseb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9788 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-08Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and ↵jcorgan
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
generated by cgit (git 2.34.1) at 2024-12-22 10:27:55 +0000