summaryrefslogtreecommitdiff
path: root/usrp2/firmware/lib/db_init.c
AgeCommit message (Collapse)Author
2009-04-27somebody commented out the tx mux setting which prevented the xcvr2450 from ↵matt
working. wrong values for rfx boards were not seen because of the above error. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10925 221aa14e-8319-0410-a670-987f0aec2ac5
2009-03-05New standalone firmware, burn_dbsrx_eeprom, that burns new dbid intoeb
modified DBS Rx daughterboard. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10560 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-04Merged r10383:10390 from jcorgan/u2-wip into trunk.jcorgan
* Implements daughterboard independent LO offset tuning * Removes RFX specific LO offset code * Adds 'set_lo_offset' to libusrp2 and Python API * Adds --lo-offset to usrp2_fft.py and usrp2_rx_cfile.py * Ensures daughterboards are reset to default values at startup. Trunk passes distcheck. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10392 221aa14e-8319-0410-a670-987f0aec2ac5
2009-02-03work in progress: xcvr running, needs work with divisorsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10377 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-30xcvr dboard supportjblum
gain setting coded, not tested set freq not implemented git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10338 221aa14e-8319-0410-a670-987f0aec2ac5
2009-01-28dbsrx daughterboard support, gain works, not freqmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10331 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-31enable all rfx boardsmatt
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9901 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-26Deadly printfs turned off... Specified gain ranges for TV Rx and RFX boards.eb
Still a problem setting the gain; Firmware takes too long to get back to service ethernet. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9860 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-15Added firmware support for adc_mux to handle swapping I/Q, etc.eb
Modified dsp_core_rx.v to swap A and B mapping so that the software thinks that the TVRX is connected to A/D A. ISE 10.1 SP3 is required to compile the FPGA successfully. SP2 is insufficient. It compiles with SP2, but the firmware doesn't load. Only the F led is one in that case. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9795 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-14fixed problem with negative offsets in calc_dxc_freqeb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9792 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-14s/w support for tx and rx muxeb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9790 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-13fix diagnostic outputeb
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9786 221aa14e-8319-0410-a670-987f0aec2ac5
2008-10-04USRP2 firmware fixes for EDK 10.1 microblaze toolchain. Firmware now buildseb
and runs correctly using these tools. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9708 221aa14e-8319-0410-a670-987f0aec2ac5
2008-09-08Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and ↵jcorgan
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
generated by cgit (git 2.34.1) at 2024-12-22 12:18:13 +0000