Age | Commit message (Collapse) | Author |
|
image
-Also corrected db_bitshark_rx.c to the current version (previous
git push error) that includes the needed delays after I2C commands
|
|
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11592 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
This forces an even number of samples in the min or max case,
preserving the alignment of interleaved samples in the face
of RX overruns or TX underruns.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11526 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
streaming GPIO functions for USRP2.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10766 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10689 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10424 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
* Implements daughterboard independent LO offset tuning
* Removes RFX specific LO offset code
* Adds 'set_lo_offset' to libusrp2 and Python API
* Adds --lo-offset to usrp2_fft.py and usrp2_rx_cfile.py
* Ensures daughterboards are reset to default values at
startup.
Trunk passes distcheck.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10392 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10183 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10176 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Wishbone bus. Minor fix for USRP2 sync_to_pps() (uses correct packet type.)
Example:
>>> from gnuradio import usrp2
>>> u = usrp2.source_32fc()
>>> u.peek(0x1234, 4) # Read four bytes at offset 0x1234 (code)
(185, 244, 253, 164)
>>>
The return value will be zero length upon error.
The read address must be 32-bit aligned, and only the lower 16 bits are
significant. The length must be an integral multiple of 4 bytes. There is
currently a read limit of 176 bytes per read; to change requires some additional
firmware changes to allocate a larger reply packet.
WARNING: Trying to read from memory locations not serviced by RAM or by a
Wishbone peripheral may result in a hang requiring a USRP2 power cycle. The
USRP2 internal memory map is documented in usrp2/firmware/lib/memory_map.h.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10172 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10116 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9997 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
-r9804:9814 into trunk; initialized dacmux in firmware.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9816 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
|