Age | Commit message (Collapse) | Author |
|
passes distcheck.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10529 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8295 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6858 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
8 bit sample width support on receive. Synthesized with 7.1SP1.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6776 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
synthesized with 7.1SP1.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6764 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6603 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
component. Trunk passes distcheck.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5942 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
and reduced delay width to 12 bits.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5228 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
by a configurable number of clock ticks, to allow users to precisely
align their T/R output with the pipeline delays in the transmitter.
There are two new registers:
FR_ATR_TX_DELAY (7'd2)
FR_ATR_RX_DELAY (7'd3)
...and the corresponding db_base.py methods to set them:
db_base.set_atr_tx_delay(clock_ticks)
db_base.set_atr_rx_delay(clock_ticks)
These methods are inherited by all the daughterboard objects so you can
call them from your scripts as:
subdev.set_atr_tx_delay(...)
...where 'subdev' represents the daughtercard object you're working with.
The FPGA synthesis for the 2 RXHB, 2 TX case expands from 95% to 96%,
with no additional synthesis messages or impact on timing.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5022 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
the CIC decimator so that signals are now roughly leveled, independent
of the decimation rate. Decimating by 44 now works too ;)
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4848 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
the tx signal processing pipeline when the Tx FIFO is empty.
This results in the DACs outputing zeros when there's no data, unless
the tx pipeline is disabled on the host.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4287 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
and include the post-ADC / pre-DDC digital rssi measurement code.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3667 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3122 221aa14e-8319-0410-a670-987f0aec2ac5
|