Age | Commit message (Collapse) | Author |
|
two antenna, and two identical daughtercards.
Cleaned up the way signal chains get built--isolated to separate functions
per mode.
SETI mode works with --dual-mode turned on, but not --interferometer.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9332 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
filtering in the post-detector chain.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9319 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
1) Modified top-level run_tests.sh script:
a) to execute code for setting or changing the library search path in
Darwin (DYLD_LIBRARY_PATH) or Windows (PATH) on those host OSs
only, not on other host OSs.
b) Added local (to the component making check) library paths to those
same search paths, since libtool doesn't do it (unlike in Linux).
2) In all AM Makefiles -except those dealing with USRP firmware-,
changes INCLUDES to AM_CPPFLAGS since the former is deprecated.
3) Changed AM_CPPFLAGS to FW_INCLUDES for commands .c.rel in USRP
firmware.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7769 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
GNU Radio modules individually, using already installed dependent libraries and include files. New functionality is enabled using --with-* on configure command line; existing build options should remain unchanged. Nice work by Michael Dickens, still needs documentation update on wiki.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7617 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7242 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Temporarily removed audio output.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7241 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7235 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7100 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7099 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7045 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6341 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6340 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Added -Q (--seti_range) option to allow setting of scanning bandwidth in
SETI mode.
Added more statistical output in seti_analyser
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6339 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6134 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
frequency changes.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6094 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
using --notches.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6093 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Added bounds-checking/setting for both --calib_coeff and --calib_offset
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6084 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
on the command line only, as --calib_offset and --calib_coeff. Now
you can tweak them with the GUI, and the command line options have
different scaling than previously.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6083 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6044 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5570 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Changed usrp_ra_receiver to use dbid() method to determine which card type
is being used.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5564 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
gr_complex_to_mag_squared(). I'm hoping this will save a little in
terms of buffer management and CPU cycles.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5060 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4817 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4760 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Fixed type mistmatch in Numeric.zeros()
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4759 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
This moves usrp related .py files from the top-level of site-packages
into site-packages/usrpm.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4728 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
with libtool and already installed libraries.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4646 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3873 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
sky at the time or not.
Increased the difficulty of the "gauntlet" that "hits" in the SETI mode
have to run through in order to be considered a hit. Hard to test :-)
Added intensity levels to SETI hit logging. This will allow post-facto
gaussian profile determination for any hits that are found.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3842 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3772 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
continuous frequency-scanning, the continuum data will be invalid
anyway, and of little use.
This saves a little bit of CPU, so I've been able to get a 25Khz
FFT with a length of 32768 bins, for continued sub-1Hz resolution,
but with a wider instantaneous bandwidth. For some reason, though,
there's a "knee" in the curve, and running at 50Khz sampling increases
the CPU consumption by a much larger factor than you'd expect.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3764 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3759 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
bandwidth to 12.5Khz, allowing sub-1Hz resolution.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3758 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
necessitated an RA-specific version of waterfallsink.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3735 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
logging is more directly plugged into the signal-processing chain,
rather than being a side-effect of plotting. For spectral data, had it
copy spectral bins into a data buffer that gets dumped once per second
in the UI, same as continuum data.
Added --calib_coeff and --calib_offset command-line parameters to scale
the output of the continuum detector.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3706 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3626 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3602 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3593 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
bandwidth, integration time, spectral averaging, and gain. This
necessitated a change to data file syntax in the last token, but the
post-processing scripts have been updated to handle both old and new
formats. In the old format, there was a single "annotation" token--
the current declination.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3588 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3571 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3570 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3534 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3490 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3489 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3488 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
run_tests.in for Python QA has been extracted into run_tests.sh in the
top-level and the individual run_tests just invoke that with the right
path parameters. Also fixed Cygwin 'make check' bug by adding fix by
Don Ward.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3440 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3291 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Merged -r3250:3255 from jcorgan/ticket-26.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3259 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
/gnuradio/branches/developers/jcorgan/ticket-10. 'make distcheck' now
successfully completes on a machine that has never had gnuradio installed
before. In addition, several cleanups and refactoring of build system
code have been applied. NOTE: gr-audio-portaudio, gr-audio-osx, and
gr-audio-windows have not been fully tested and will need verification
by the maintainers of these components.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3216 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3193 221aa14e-8319-0410-a670-987f0aec2ac5
|