Age | Commit message (Collapse) | Author |
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10629 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10623 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10600 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10498 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10374 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10285 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10278 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
setup_interferometer()
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10267 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
increased notch resolution to 128 taps
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10190 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Increased buffering on usrp.source_c
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10185 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10180 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10178 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
the command line. Temporarily commented-out call to set_bw(), since latest
trunk has broken it.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10173 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10147 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
via a named pipe.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9349 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
two antenna, and two identical daughtercards.
Cleaned up the way signal chains get built--isolated to separate functions
per mode.
SETI mode works with --dual-mode turned on, but not --interferometer.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9332 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
filtering in the post-detector chain.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9319 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7235 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7099 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7045 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6341 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Added -Q (--seti_range) option to allow setting of scanning bandwidth in
SETI mode.
Added more statistical output in seti_analyser
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6339 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
frequency changes.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6094 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
using --notches.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6093 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Added bounds-checking/setting for both --calib_coeff and --calib_offset
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6084 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
on the command line only, as --calib_offset and --calib_coeff. Now
you can tweak them with the GUI, and the command line options have
different scaling than previously.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6083 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@6044 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5570 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Changed usrp_ra_receiver to use dbid() method to determine which card type
is being used.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5564 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
gr_complex_to_mag_squared(). I'm hoping this will save a little in
terms of buffer management and CPU cycles.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@5060 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4817 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Fixed type mistmatch in Numeric.zeros()
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4759 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
This moves usrp related .py files from the top-level of site-packages
into site-packages/usrpm.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4728 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3873 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
sky at the time or not.
Increased the difficulty of the "gauntlet" that "hits" in the SETI mode
have to run through in order to be considered a hit. Hard to test :-)
Added intensity levels to SETI hit logging. This will allow post-facto
gaussian profile determination for any hits that are found.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3842 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3772 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
continuous frequency-scanning, the continuum data will be invalid
anyway, and of little use.
This saves a little bit of CPU, so I've been able to get a 25Khz
FFT with a length of 32768 bins, for continued sub-1Hz resolution,
but with a wider instantaneous bandwidth. For some reason, though,
there's a "knee" in the curve, and running at 50Khz sampling increases
the CPU consumption by a much larger factor than you'd expect.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3764 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3759 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
bandwidth to 12.5Khz, allowing sub-1Hz resolution.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3758 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
necessitated an RA-specific version of waterfallsink.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3735 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
logging is more directly plugged into the signal-processing chain,
rather than being a side-effect of plotting. For spectral data, had it
copy spectral bins into a data buffer that gets dumped once per second
in the UI, same as continuum data.
Added --calib_coeff and --calib_offset command-line parameters to scale
the output of the continuum detector.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3706 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3602 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3571 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3534 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3488 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3122 221aa14e-8319-0410-a670-987f0aec2ac5
|