Age | Commit message (Collapse) | Author |
|
Radio interface to the Cell Broadband Engine.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8244 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
energy calculation to normalize the correlation and the timing sequence and correlation together to determine the timing. This works for frequencies of +-0.6 offset, which is a limiting factor still in the performance but better than the previous checkin.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8222 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Tufvesson, et al. that does a bit more work than the Schmidl and Cox to produce a more identifiable peak for the timing. This seems to work well in the simulation for low frequency errors. The correlation doesn't seem to track well, though. See the comments for more info. Also, the peak detection requires unity amplitude for the threshold detection. So, who wants to make an OFDM AGC?
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8217 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
in the OFDM receiver. Its only used for testing in the simulation mode if you want to remove any affects of the synchronization blocks. You have to manually edit the number of symbols and any fractional frequency offset you might want to use.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8213 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
estimation is horrible and it still has some problems that may be a fundamental issue with the idea. I need to get the paper this was based off of to review it.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8212 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
distcheck vs. command-line, so commented out for now.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8207 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
and decoder corresponding to the R=1/2, K=7 CCSDS standard ("Voyager").
This code is a GNU Radio wrapper around a 1995-era KA9Q portable-C
implementation, and is designed for continuous streaming data, not packets.
The encoder takes MSB packed bytes and outputs channel symbols 0 or 1.
The decoder uses soft-decision Viterbi decoding on a floating point stream of
(possibly noise corrupted) [1.0, 1.0] symbols, and outputs MSB packed
decoded bytes.
Benchmarking on a 2.16 GHz Intel Core 2 Duo shows 4.7 Mbps decoding rate at
100% CPU usage (single core). (There is a newer KA9Q library that implements
SIMD speed ups with correspondingly faster performance.)
The KA9Q library is placed into src/lib/viterbi. It could use some cleanup,
file/function renaming, and refactoring, or even replacement with the newer
libfec code that is available.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8206 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
CP timing signal, it correlates against the known preamble just to send along the timing trigger. This works nicely and keeps the frequency more constant in the receiver since it updates the estimate every received symbol. Read the comments inside to see why it's 'mostly fixed' -- this was mostly proving a point for myself today.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8199 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
change the behavior or performance at all. The sync. block only calculates the frequency and timing signals and now outputs the fine frequency adjustment signal from output 0 and the timing signal for the start of the packet from output 1.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8198 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8194 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8193 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
applications as background daemon processes instead of foreground applications.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8191 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
decimates. Trunk passes distcheck.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8190 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8189 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8188 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8187 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
output.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8186 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
the half-band filter in the USRP.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8185 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8163 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8146 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
to improve OFDM system operation. Not much more we can do with this than add channel coding and cleaning up.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8144 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8097 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8096 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8057 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8050 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
present, only NetBSD-current is known to do this.) Improve the
comment explaining the situation.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@8034 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
reverts changeset 7899 and fixes some distcheck problems. We're now
back to the old behavior, where you must "make" before "make distcheck".
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7931 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Merged eb/pmake r7909:7911 into trunk
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7912 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
'make distcheck' without running 'make' first.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7899 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7888 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7866 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
issues in transmitting OFDM over the air with 1 preamble symbol. Still some smaller issues left.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7848 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
d_sizeof_output_item!=d_sizeof_input_item
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7847 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7844 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7834 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7802 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
1) Modified top-level run_tests.sh script:
a) to execute code for setting or changing the library search path in
Darwin (DYLD_LIBRARY_PATH) or Windows (PATH) on those host OSs
only, not on other host OSs.
b) Added local (to the component making check) library paths to those
same search paths, since libtool doesn't do it (unlike in Linux).
2) In all AM Makefiles -except those dealing with USRP firmware-,
changes INCLUDES to AM_CPPFLAGS since the former is deprecated.
3) Changed AM_CPPFLAGS to FW_INCLUDES for commands .c.rel in USRP
firmware.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7769 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7761 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7739 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
gr.xor_* blocks.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7735 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
Adds Martin Braun's gr.wavfile_source and gr.wavfile_sink blocks.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7730 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7721 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7718 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
GNU Radio modules individually, using already installed dependent libraries and include files. New functionality is enabled using --with-* on configure command line; existing build options should remain unchanged. Nice work by Michael Dickens, still needs documentation update on wiki.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7617 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
all work on the trunk must use gr.top_block and gr.hier_block2.
Merged eb/fg-no-more -r7602:7606 into trunk.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7607 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
over-the-air OFDM. Works with all modulations and tested both send and receive on different computers/USRPs. Misses a few packets, so it's not perfect.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7587 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
messages.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7565 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
The gr_plot_data.py class installs into the gnuradio namespace as
gnuradio.plot_data, and the remainder of the scripts install into
$prefix/bin.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7536 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
to install the necessary packages.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7529 221aa14e-8319-0410-a670-987f0aec2ac5
|
|
you can now specify multiple input files on the command line and each are plotted in a different color. Useful when comparing two outputs.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@7528 221aa14e-8319-0410-a670-987f0aec2ac5
|