Age | Commit message (Collapse) | Author | |
---|---|---|---|
2009-09-04 | stop sending short ethernet command packets. | Eric Blossom | |
2009-09-04 | Fix problem with commands timing out (specifically stop_rx_streaming) | Eric Blossom | |
After fixing the race, this change uses Tom's idea to stop enqueuing data when trying to stop, and adds a new flush_rx_samples method to drop any samples that may have already been accumulated. I ran Tom's test case 500 times with 0 failures ;-) | |||
2009-09-04 | Fix race condition that caused commands such as stop_rx_streaming to fail. | Eric Blossom | |
This fixes the bulk of the problem. Next step is to drop data packets while waiting for the reply. | |||
2009-09-04 | stop sending short ethernet command packets. | Eric Blossom | |
2009-09-04 | Fix problem with commands timing out (specifically stop_rx_streaming) | Eric Blossom | |
After fixing the race, this change uses Tom's idea to stop enqueuing data when trying to stop, and adds a new flush_rx_samples method to drop any samples that may have already been accumulated. I ran Tom's test case 500 times with 0 failures ;-) | |||
2009-09-04 | Fix race condition that caused commands such as stop_rx_streaming to fail. | Eric Blossom | |
This fixes the bulk of the problem. Next step is to drop data packets while waiting for the reply. | |||
2009-09-03 | seems to build a decent fpga, but still some issues with a full connection. | Matt Ettus | |
2009-09-03 | Merge branch 'sync' from http://gnuradio.org/git/trondeau.git into master | Johnathan Corgan | |
* Fixing a line in the clock recovery algorithm. This works with a bit larger error than there proably should be. * Adding clock sync algorithm using PFB. This works, but needs a bit more work. | |||
2009-09-03 | Fixing a line in the clock recovery algorithm. This works with a bit larger ↵ | Tom Rondeau | |
error than there proably should be. | |||
2009-09-03 | Better fix for broken AC_PROG_F77 macro | Johnathan Corgan | |
* Move AC_PROG_CC into GR_FORTRAN macro definition | |||
2009-09-03 | removed hard-coded link_is_up = true; | Eric Blossom | |
2009-09-03 | we dont use test() -> remove it | Josh Blum | |
2009-09-03 | MAC transmit seems to work now. The root cause of the problem was ↵ | Matt Ettus | |
accidentally using the rx_clk in one stage of the fifos on the tx side. | |||
2009-09-03 | Fix Python header check failure due to invalid cached state | Johnathan Corgan | |
* GR_FORTRAN macro leaves $ac_ext=f on some systems * Restore by invoking AC_PROG_CC Reported-by: Szymon Jakubczak <szym@csail.mit.edu> Signed-off-by: Johnathan Corgan <jcorgan@corganenterprises.com> | |||
2009-09-03 | Made the window for the pass band filters integers (take firdes.WIN_XXX). | Josh Blum | |
Now a window can be controlled by a variable such as a chooser. | |||
2009-09-03 | set device to xc3s2000. Shouldn't make any differences. | Matt Ettus | |
2009-09-03 | misc ignores | Matt Ettus | |
2009-09-03 | made a new block ram based fifo, 64 (65) elements long, all fifos now have ↵ | Matt Ettus | |
"enhanced level logic" for accurate fullness. Maybe this will help... | |||
2009-09-02 | bring the testbench files up to date | Matt Ettus | |
2009-09-02 | major cleanup of 2 clock fifos | Matt Ettus | |
2009-09-02 | cleaning up the new fifos | Matt Ettus | |
2009-09-02 | cascadefifo.v wasn't used, only the double cascade version. fifo_2clock.v ↵ | Matt Ettus | |
and fifo_2clock.v are empty | |||
2009-09-02 | never used, not needed | Matt Ettus | |
2009-09-02 | ignore .o files | Matt Ettus | |
2009-09-02 | debug pins, cleaned ignores | Matt Ettus | |
2009-09-02 | sort out active-low lines on locallink fifos, added debug pins | Matt Ettus | |
2009-09-02 | Evaluation fix in param.to_code(). | Josh Blum | |
Dont force an evaluation in to code unless the type is string or list. Not doing so forces the variables to call evaluate before the namespace was bootstrapped. This fixes a bug that came up when the validate was replaced with rewrite in flowgraph.import_data(). By replacing the validate, evaluate was only called once, and the namespace was not bootstrapped. | |||
2009-09-02 | Removed these files completely, they were for the old style of fifos | Matt Ettus | |
2009-09-02 | Merge branch 'wxgui_fix' from http://gnuradio.org/git/jblum.git into master | Johnathan Corgan | |
* waterfall and fft use a common autoscale function * Fix so that the waterfall texture is initialized with a buffer of the same size. | |||
2009-09-02 | Merge branch 'lo_fix' from http://gnuradio.org/git/jblum.git into master | Johnathan Corgan | |
* Modifications to usrp2 source and sink so that set center freq is called afer set lo offset. * Modifications to the usrp blocks and wrapper so that the lo offset is set with the lo frequency. | |||
2009-09-02 | waterfall and fft use a common autoscale function | Josh Blum | |
2009-09-02 | Fix so that the waterfall texture is initialized with a buffer of the same size. | Josh Blum | |
If the fft size was a non power of two, the buffer would be a different size. This would cause a segfault. Particularly because fft_window was throwing out a bin. | |||
2009-09-02 | Modifications to usrp2 source and sink so that set center freq is called ↵ | Josh Blum | |
afer set lo offset. | |||
2009-09-02 | Removed the flagging api and usage from the base classes. | Josh Blum | |
Far better to flag the namespace for renewing once in the flowgraph.py | |||
2009-09-02 | added ref scale param to fft and waterfall | Josh Blum | |
2009-09-02 | Modifications to the usrp blocks and wrapper so that the lo offset is set ↵ | Josh Blum | |
with the lo frequency. | |||
2009-09-02 | Removed subversion related configuration info. | Johnathan Corgan | |
* Don't call GR_SUBVERSION in configure.ac * Remove --svn* options from gnuradio-config-info | |||
2009-09-02 | Merge branch 'wxgui' from http://gnuradio.org/git/jblum.git into master | Johnathan Corgan | |
* Modified log power fft block so ref scale is peak to peak. * Tweaked fft sink autoscale routine to come up with better numbers. * Modified scope sink ac couple block to use constant tap. The previous tap calculation would cause failure for very small sample rates. | |||
2009-09-02 | Expand frequency ranges to match hardware capability. | Johnathan Corgan | |
* Corresponds to SVN r11620:11622 * Fixes ticket 405 Reported-by: Dimitris Symeonidis <azimout@gmail.com> Fixed-by: Matt Ettus <matt@ettus.com> | |||
2009-09-01 | fixed addressing of registers, and added write enables to those that were ↵ | Matt Ettus | |
missing. MDIO seems ok. | |||
2009-09-01 | Can now change the size of the symbols. Also fixes some layout issues. | Tom Rondeau | |
2009-09-01 | Adding ability to change line width and style (only a handful of current ↵ | Tom Rondeau | |
styles enabled). | |||
2009-09-01 | Removing plot picker that addd nothing to the interface. | Tom Rondeau | |
2009-09-01 | Adding a Reload option (Ctrl+R) option to quickly reread the file and reset ↵ | Tom Rondeau | |
the state. | |||
2009-09-01 | tell s/w link is up. additional debugging output | Eric Blossom | |
2009-08-31 | Modified log power fft block so ref scale is peak to peak. | Josh Blum | |
Tweaked fft sink autoscale routine to come up with better numbers. Modified scope sink ac couple block to use constant tap. The previous tap calculation would cause failure for very small sample rates. | |||
2009-08-31 | Merged SVN matt/new_eth r10782:11633 into new_eth | Johnathan Corgan | |
* svn diff http://gnuradio.org/svn/branches/developers/matt/new_eth -r10782:11633 * Patch applied with no conflicts or fuzz. | |||
2009-08-30 | Adding clock sync algorithm using PFB. This works, but needs a bit more work. | Tom | |
2009-08-30 | Switched the python classes to inherit from the base and gui classes. | Josh Blum | |
Use only **kwargs so all contructor parameters must be passed with keys. Moved gui input forms classes from base to gui param module. | |||
2009-08-30 | port and param types from an overloaded method | Josh Blum | |