diff options
Diffstat (limited to 'usrp/host/lib/legacy/db_wbx.cc')
| -rw-r--r-- | usrp/host/lib/legacy/db_wbx.cc | 953 |
1 files changed, 0 insertions, 953 deletions
diff --git a/usrp/host/lib/legacy/db_wbx.cc b/usrp/host/lib/legacy/db_wbx.cc deleted file mode 100644 index 9f1d72939..000000000 --- a/usrp/host/lib/legacy/db_wbx.cc +++ /dev/null @@ -1,953 +0,0 @@ -/* -*- c++ -*- */ -// -// Copyright 2008 Free Software Foundation, Inc. -// -// This file is part of GNU Radio -// -// GNU Radio is free software; you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation; either asversion 3, or (at your option) -// any later version. -// -// GNU Radio is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with GNU Radio; see the file COPYING. If not, write to -// the Free Software Foundation, Inc., 51 Franklin Street, -// Boston, MA 02110-1301, USA. - -#include <db_wbx.h> -#include <fpga_regs_standard.h> -#include <fpga_regs_common.h> -#include <usrp_prims.h> -#include <usrp_spi_defs.h> -#include <stdexcept> -#include <cmath> - -// d'board i/o pin defs - -// TX IO Pins -#define TX_POWER (1 << 0) // TX Side Power -#define RX_TXN (1 << 1) // T/R antenna switch for TX/RX port -#define TX_ENB_MIX (1 << 2) // Enable IQ mixer -#define TX_ENB_VGA (1 << 3) - -// RX IO Pins -#define RX2_RX1N (1 << 0) // antenna switch between RX2 and TX/RX port -#define RXENABLE (1 << 1) // enables mixer -#define PLL_LOCK_DETECT (1 << 2) // Muxout pin from PLL -- MUST BE INPUT -#define MReset (1 << 3) // NB6L239 Master Reset, asserted low -#define SELA0 (1 << 4) // NB6L239 SelA0 -#define SELA1 (1 << 5) // NB6L239 SelA1 -#define SELB0 (1 << 6) // NB6L239 SelB0 -#define SELB1 (1 << 7) // NB6L239 SelB1 -#define PLL_ENABLE (1 << 8) // CE Pin on PLL -#define AUX_SCLK (1 << 9) // ALT SPI SCLK -#define AUX_SDO (1 << 10) // ALT SPI SDO -#define AUX_SEN (1 << 11) // ALT SPI SEN - - -wbx_base::wbx_base(usrp_basic_sptr usrp, int which) - : db_base(usrp, which) -{ - /* - * @param usrp: instance of usrp.source_c - * @param which: which side: 0 or 1 corresponding to side A or B respectively - * @type which: int - */ - - d_first = true; - d_spi_format = SPI_FMT_MSB | SPI_FMT_HDR_0; - - // FIXME -- the write reg functions don't work with 0xffff for masks - _rx_write_oe(int(PLL_ENABLE|MReset|SELA0|SELA1|SELB0|SELB1|RX2_RX1N|RXENABLE), 0x7fff); - _rx_write_io((PLL_ENABLE|MReset|0|RXENABLE), (PLL_ENABLE|MReset|RX2_RX1N|RXENABLE)); - - _tx_write_oe((TX_POWER|RX_TXN|TX_ENB_MIX|TX_ENB_VGA), 0x7fff); - _tx_write_io((0|RX_TXN), (TX_POWER|RX_TXN|TX_ENB_MIX|TX_ENB_VGA)); // TX off, TR switch set to RX - - if(d_which == 0) { - d_spi_enable = SPI_ENABLE_RX_A; - } - else { - d_spi_enable = SPI_ENABLE_RX_B; - } - - set_auto_tr(false); - -} - -wbx_base::~wbx_base() -{ - shutdown(); -} - - -void -wbx_base::shutdown() -{ - if (!d_is_shutdown){ - d_is_shutdown = true; - // do whatever there is to do to shutdown - - write_io(d_which, d_power_off, POWER_UP); // turn off power to board - _write_oe(d_which, 0, 0xffff); // turn off all outputs - set_auto_tr(false); // disable auto transmit - } -} - -bool -wbx_base::_lock_detect() -{ - /* - * @returns: the value of the VCO/PLL lock detect bit. - * @rtype: 0 or 1 - */ - - if(_rx_read_io() & PLL_LOCK_DETECT) { - return true; - } - else { // Give it a second chance - if(_rx_read_io() & PLL_LOCK_DETECT) { - return true; - } - else { - return false; - } - } -} - -bool -wbx_base::_tx_write_oe(int value, int mask) -{ - int reg = (d_which == 0 ? FR_OE_0 : FR_OE_2); - return d_usrp->_write_fpga_reg(reg, ((mask & 0xffff) << 16) | (value & 0xffff)); -} - -bool -wbx_base::_rx_write_oe(int value, int mask) -{ - int reg = (d_which == 0 ? FR_OE_1 : FR_OE_3); - return d_usrp->_write_fpga_reg(reg, ((mask & 0xffff) << 16) | (value & 0xffff)); -} - -bool -wbx_base::_tx_write_io(int value, int mask) -{ - int reg = (d_which == 0 ? FR_IO_0 : FR_IO_2); - return d_usrp->_write_fpga_reg(reg, ((mask & 0xffff) << 16) | (value & 0xffff)); -} - -bool -wbx_base::_rx_write_io(int value, int mask) -{ - int reg = (d_which == 0 ? FR_IO_1 : FR_IO_3); - return d_usrp->_write_fpga_reg(reg, ((mask & 0xffff) << 16) | (value & 0xffff)); -} - -bool -wbx_base::_rx_read_io() -{ - int reg = (d_which == 0 ? FR_RB_IO_RX_A_IO_TX_A : FR_RB_IO_RX_B_IO_TX_B); - int t = d_usrp->_read_fpga_reg(reg); - return (t >> 16) & 0xffff; -} - -bool -wbx_base::_tx_read_io() -{ - int reg = (d_which == 0 ? FR_RB_IO_RX_A_IO_TX_A : FR_RB_IO_RX_B_IO_TX_B); - int t = d_usrp->_read_fpga_reg(reg); - return (t & 0xffff); -} - -bool -wbx_base::_compute_regs(double freq) -{ - /* - * Determine values of registers, along with actual freq. - * - * @param freq: target frequency in Hz - * @type freq: double - * @returns: (R, N, func, init, actual_freq) - * @rtype: tuple(int, int, int, int, double) - * - * Override this in derived classes. - */ - throw std::runtime_error("_compute_regs called from base class\n"); -} - -double -wbx_base::_refclk_freq() -{ - return (double)(d_usrp->fpga_master_clock_freq())/_refclk_divisor(); -} - -int -wbx_base::_refclk_divisor() -{ - /* - * Return value to stick in REFCLK_DIVISOR register - */ - return 1; -} - -struct freq_result_t -wbx_base::set_freq(double freq) -{ - /* - * @returns (ok, actual_baseband_freq) where: - * ok is True or False and indicates success or failure, - * actual_baseband_freq is the RF frequency that corresponds to DC in the IF. - */ - throw std::runtime_error("set_freq called from base class\n"); -} - -float -wbx_base::gain_min() -{ - throw std::runtime_error("gain_min called from base class\n"); -} - -float -wbx_base::gain_max() -{ - throw std::runtime_error("gain_max called from base class\n"); -} - -float -wbx_base::gain_db_per_step() -{ - throw std::runtime_error("gain_db_per_step called from base class\n"); -} - -bool -wbx_base::set_gain(float gain) -{ - /* - * Set the gain. - * - * @param gain: gain in decibels - * @returns True/False - */ - throw std::runtime_error("set_gain called from base class\n"); -} - -bool -wbx_base::_set_pga(float pga_gain) -{ - bool ok; - if(d_which == 0) { - ok = d_usrp->set_pga(0, pga_gain); - ok |= d_usrp->set_pga(1, pga_gain); - } - else { - ok = d_usrp->set_pga(2, pga_gain); - ok |= d_usrp->set_pga(3, pga_gain); - } - return ok; -} - -bool -wbx_base::is_quadrature() -{ - /* - * Return True if this board requires both I & Q analog channels. - * - * This bit of info is useful when setting up the USRP Rx mux register. - */ - return true; -} - - -/****************************************************************************/ - - -wbx_base_tx::wbx_base_tx(usrp_basic_sptr usrp, int which) - : wbx_base(usrp, which) -{ - /* - * @param usrp: instance of usrp.sink_c - * @param which: 0 or 1 corresponding to side TX_A or TX_B respectively. - */ - - // power up the transmit side, NO -- but set antenna to receive - d_usrp->write_io(d_which, (TX_POWER), (TX_POWER|RX_TXN)); - d_lo_offset = 0e6; - - // Gain is not set by the PGA, but the PGA must be set at max gain in the TX - _set_pga(d_usrp->pga_max()); -} - -wbx_base_tx::~wbx_base_tx() -{ - // Power down and leave the T/R switch in the R position - d_usrp->write_io(d_which, (RX_TXN), (TX_POWER|RX_TXN|TX_ENB_MIX|TX_ENB_VGA)); -} - -void -wbx_base_tx::set_auto_tr(bool on) -{ - if(on) { - set_atr_mask (RX_TXN); - set_atr_txval(0); - set_atr_rxval(RX_TXN); - } - else { - set_atr_mask (0); - set_atr_txval(0); - set_atr_rxval(0); - } -} - -void -wbx_base_tx::set_enable(bool on) -{ - /* - * Enable transmitter if on is True - */ - - int mask = RX_TXN|TX_ENB_MIX|TX_ENB_VGA; - //printf("HERE!!!!\n"); - if(on) { - d_usrp->write_io(d_which, TX_ENB_MIX|TX_ENB_VGA, mask); - } - else { - d_usrp->write_io(d_which, RX_TXN, mask); - } -} - -void -wbx_base_tx::set_lo_offset(double offset) -{ - /* - * Set amount by which LO is offset from requested tuning frequency. - * - * @param offset: offset in Hz - */ - - d_lo_offset = offset; -} - -double -wbx_base_tx::lo_offset() -{ - /* - * Get amount by which LO is offset from requested tuning frequency. - * - * @returns Offset in Hz - */ - - return d_lo_offset; -} - - -/****************************************************************************/ - - -wbx_base_rx::wbx_base_rx(usrp_basic_sptr usrp, int which) - : wbx_base(usrp, which) -{ - /* - * @param usrp: instance of usrp.source_c - * @param which: 0 or 1 corresponding to side RX_A or RX_B respectively. - */ - - // set up for RX on TX/RX port - select_rx_antenna("TX/RX"); - - bypass_adc_buffers(true); - - d_lo_offset = 0.0; -} - -wbx_base_rx::~wbx_base_rx() -{ - // Power down - d_usrp->write_io(d_which, 0, (RXENABLE)); -} - -void -wbx_base_rx::set_auto_tr(bool on) -{ - if(on) { - // FIXME: where does ENABLE come from? - //set_atr_mask (ENABLE); - set_atr_txval( 0); - //set_atr_rxval(ENABLE); - } - else { - set_atr_mask (0); - set_atr_txval(0); - set_atr_rxval(0); - } -} - -void -wbx_base_rx::select_rx_antenna(int which_antenna) -{ - /* - * Specify which antenna port to use for reception. - * @param which_antenna: either 'TX/RX' or 'RX2' - */ - - if(which_antenna == 0) { - d_usrp->write_io(d_which, 0, RX2_RX1N); - } - else if(which_antenna == 1) { - d_usrp->write_io(d_which, RX2_RX1N, RX2_RX1N); - } - else { - throw std::invalid_argument("which_antenna must be either 'TX/RX' or 'RX2'\n"); - } -} - -void -wbx_base_rx::select_rx_antenna(const std::string &which_antenna) -{ - if(which_antenna == "TX/RX") { - select_rx_antenna(0); - } - else if(which_antenna == "RX2") { - select_rx_antenna(1); - } - else { - throw std::invalid_argument("which_antenna must be either 'TX/RX' or 'RX2'\n"); - } -} - -bool -wbx_base_rx::set_gain(float gain) -{ - /* - * Set the gain. - * - * @param gain: gain in decibels - * @returns True/False - */ - - float pga_gain, agc_gain; - float maxgain = gain_max() - d_usrp->pga_max(); - float mingain = gain_min(); - if(gain > maxgain) { - pga_gain = gain-maxgain; - assert(pga_gain <= d_usrp->pga_max()); - agc_gain = maxgain; - } - else { - pga_gain = 0; - agc_gain = gain; - } - - float V_maxgain = .2; - float V_mingain = 1.2; - float V_fullscale = 3.3; - float dac_value = (agc_gain*(V_maxgain-V_mingain)/(maxgain-mingain) + V_mingain)*4096/V_fullscale; - - assert(dac_value>=0 && dac_value<4096); - - return d_usrp->write_aux_dac(d_which, 0, (int)(dac_value)) && _set_pga((int)(pga_gain)); -} - -void -wbx_base_rx::set_lo_offset(double offset) -{ - /* - * Set amount by which LO is offset from requested tuning frequency. - * - * @param offset: offset in Hz - */ - d_lo_offset = offset; -} - -double -wbx_base_rx::lo_offset() -{ - /* - * Get amount by which LO is offset from requested tuning frequency. - * - * @returns Offset in Hz - */ - return d_lo_offset; -} - -bool -wbx_base_rx::i_and_q_swapped() -{ - /* - * Return True if this is a quadrature device and ADC 0 is Q. - */ - return false; -} - - -/****************************************************************************/ - -_ADF410X_common::_ADF410X_common() -{ - // R-Register Common Values - d_R_RSV = 0; // bits 23,22,21 - d_LDP = 1; // bit 20 Lock detect in 5 cycles - d_TEST = 0; // bit 19,18 Normal - d_ABP = 0; // bit 17,16 2.9ns - - // N-Register Common Values - d_N_RSV = 0; // 23,22 - d_CP_GAIN = 0; // 21 - - // Function Register Common Values - d_P = 0; // bits 23,22 0 = 8/9, 1 = 16/17, 2 = 32/33, 3 = 64/65 - d_PD2 = 0; // bit 21 Normal operation - d_CP2 = 4; // bits 20,19,18 CP Gain = 5mA - d_CP1 = 4; // bits 17,16,15 CP Gain = 5mA - d_TC = 0; // bits 14-11 PFD Timeout - d_FL = 0; // bit 10,9 Fastlock Disabled - d_CP3S = 0; // bit 8 CP Enabled - d_PDP = 0; // bit 7 Phase detector polarity, Positive=1 - d_MUXOUT = 1; // bits 6:4 Digital Lock Detect - d_PD1 = 0; // bit 3 Normal operation - d_CR = 0; // bit 2 Normal operation -} - -_ADF410X_common::~_ADF410X_common() -{ -} - -bool -_ADF410X_common::_compute_regs(double freq, int &retR, int &retcontrol, - int &retN, double &retfreq) -{ - /* - * Determine values of R, control, and N registers, along with actual freq. - * - * @param freq: target frequency in Hz - * @type freq: double - * @returns: (R, N, control, actual_freq) - * @rtype: tuple(int, int, int, double) - */ - - // Band-specific N-Register Values - double phdet_freq = _refclk_freq()/d_R_DIV; - printf("phdet_freq = %f\n", phdet_freq); - - double desired_n = round(freq*d_freq_mult/phdet_freq); - printf("desired_n %f\n", desired_n); - - double actual_freq = desired_n * phdet_freq; - printf("actual freq %f\n", actual_freq); - - double B = floor(desired_n/_prescaler()); - double A = desired_n - _prescaler()*B; - printf("A %f B %f\n", A, B); - - d_B_DIV = int(B); // bits 20:8; - d_A_DIV = int(A); // bit 6:2; - - if(d_B_DIV < d_A_DIV) { - retR = 0; - retN = 0; - retcontrol = 0; - retfreq = 0; - return false; - } - - retR = (d_R_RSV<<21) | (d_LDP<<20) | (d_TEST<<18) | - (d_ABP<<16) | (d_R_DIV<<2); - - retN = (d_N_RSV<<22) | (d_CP_GAIN<<21) | (d_B_DIV<<8) | (d_A_DIV<<2); - - retcontrol = (d_P<<22) | (d_PD2<<21) | (d_CP2<<18) | (d_CP1<<15) | - (d_TC<<11) | (d_FL<<9) | (d_CP3S<<8) | (d_PDP<<7) | - (d_MUXOUT<<4) | (d_PD1<<3) | (d_CR<<2); - - retfreq = actual_freq/d_freq_mult; - - return true; -} - -void -_ADF410X_common::_write_all(int R, int N, int control) -{ - /* - * Write all PLL registers: - * R counter latch, - * N counter latch, - * Function latch, - * Initialization latch - * - * Adds 10ms delay between writing control and N if this is first call. - * This is the required power-up sequence. - * - * @param R: 24-bit R counter latch - * @type R: int - * @param N: 24-bit N counter latch - * @type N: int - * @param control: 24-bit control latch - * @type control: int - */ - static bool first = true; - - timespec t; - t.tv_sec = 0; - t.tv_nsec = 10000000; - - _write_R(R); - _write_func(control); - _write_init(control); - if(first) { - //time.sleep(0.010); - nanosleep(&t, NULL); - first = false; - } - _write_N(N); -} - -void -_ADF410X_common::_write_R(int R) -{ - _write_it((R & ~0x3) | 0); -} - -void -_ADF410X_common::_write_N(int N) -{ - _write_it((N & ~0x3) | 1); -} - -void -_ADF410X_common::_write_func(int func) -{ - _write_it((func & ~0x3) | 2); -} - -void -_ADF410X_common::_write_init(int init) -{ - _write_it((init & ~0x3) | 3); -} - -void -_ADF410X_common::_write_it(int v) -{ - char c[3]; - c[0] = (char)((v >> 16) & 0xff); - c[1] = (char)((v >> 8) & 0xff); - c[2] = (char)((v & 0xff)); - std::string s(c, 3); - //d_usrp->_write_spi(0, d_spi_enable, d_spi_format, s); - usrp()->_write_spi(0, d_spi_enable, d_spi_format, s); -} - -int -_ADF410X_common::_prescaler() -{ - if(d_P == 0) { - return 8; - } - else if(d_P == 1) { - return 16; - } - else if(d_P == 2) { - return 32; - } - else if(d_P == 3) { - return 64; - } - else { - throw std::invalid_argument("Prescaler out of range\n"); - } -} - -double -_ADF410X_common::_refclk_freq() -{ - throw std::runtime_error("_refclk_freq called from base class."); -} - -bool -_ADF410X_common::_rx_write_io(int value, int mask) -{ - throw std::runtime_error("_rx_write_io called from base class."); -} - -bool -_ADF410X_common::_lock_detect() -{ - throw std::runtime_error("_lock_detect called from base class."); -} - -usrp_basic* -_ADF410X_common::usrp() -{ - throw std::runtime_error("usrp() called from base class."); -} - - -/****************************************************************************/ - - -_lo_common::_lo_common() - : _ADF410X_common() -{ - // Band-specific R-Register Values - d_R_DIV = 4; // bits 15:2 - - // Band-specific C-Register values - d_P = 0; // bits 23,22 0 = Div by 8/9 - d_CP2 = 4; // bits 19:17 - d_CP1 = 4; // bits 16:14 - - // Band specifc N-Register Values - d_DIVSEL = 0; // bit 23 - d_DIV2 = 0; // bit 22 - d_CPGAIN = 0; // bit 21 - d_freq_mult = 1; - - d_div = 1; - d_aux_div = 2; - d_main_div = 0; -} - -_lo_common::~_lo_common() -{ -} - -double -_lo_common::freq_min() -{ - return 50e6; -} - -double -_lo_common::freq_max() -{ - return 1000e6; -} - -void -_lo_common::set_divider(int main_or_aux, int divisor) -{ - if(main_or_aux == 0) { - if((divisor != 1) || (divisor != 2) || (divisor != 4) || (divisor != 8)) { - throw std::invalid_argument("Main Divider Must be 1, 2, 4, or 8\n"); - } - d_main_div = (int)(log10(divisor)/log10(2.0)); - } - else if(main_or_aux == 1) { - if((divisor != 2) || (divisor != 4) || (divisor != 8) || (divisor != 16)) { - throw std::invalid_argument("Aux Divider Must be 2, 4, 8 or 16\n"); - } - d_main_div = (int)(log10(divisor/2.0)/log10(2.0)); - } - else { - throw std::invalid_argument("main_or_aux must be 'main' or 'aux'\n"); - } - - int vala = d_main_div*SELA0; - int valb = d_aux_div*SELB0; - int mask = SELA0|SELA1|SELB0|SELB1; - - _rx_write_io((vala | valb), mask); -} - -void -_lo_common::set_divider(const std::string &main_or_aux, int divisor) -{ - if(main_or_aux == "main") { - set_divider(0, divisor); - } - else if(main_or_aux == "aux") { - set_divider(1, divisor); - } - else { - throw std::invalid_argument("main_or_aux must be 'main' or 'aux'\n"); - } -} - -struct freq_result_t -_lo_common::set_freq(double freq) -{ - struct freq_result_t ret; - - if(freq < 20e6 or freq > 1200e6) { - throw std::invalid_argument("Requested frequency out of range\n"); - } - - int div = 1; - double lo_freq = freq * 2; - while((lo_freq < 1e9) && (div < 8)) { - div = div * 2; - lo_freq = lo_freq * 2; - } - - printf("For RF freq of %f, we set DIV=%d and LO Freq=%f\n", freq, div, lo_freq); - - set_divider("main", div); - set_divider("aux", div*2); - - int R, N, control; - double actual_freq; - _compute_regs(lo_freq, R, N, control, actual_freq); - - printf("R %d N %d control %d actual freq %f\n", R, N, control, actual_freq); - if(R==0) { - ret.ok = false; - ret.baseband_freq = 0.0; - return ret; - } - _write_all(R, N, control); - - ret.ok = _lock_detect(); - ret.baseband_freq = actual_freq/div/2; - return ret; -} - - -/****************************************************************************/ - - -db_wbx_lo_tx::db_wbx_lo_tx(usrp_basic_sptr usrp, int which) - : _lo_common(), - wbx_base_tx(usrp, which) -{ -} - -db_wbx_lo_tx::~db_wbx_lo_tx() -{ -} - -float -db_wbx_lo_tx::gain_min() -{ - return -56.0; -} - -float -db_wbx_lo_tx::gain_max() -{ - return 0.0; -} - -float -db_wbx_lo_tx::gain_db_per_step() -{ - return 0.1; -} - -bool -db_wbx_lo_tx::set_gain(float gain) -{ - /* - * Set the gain. - * - * @param gain: gain in decibels - * @returns True/False - */ - - float txvga_gain; - float maxgain = gain_max(); - float mingain = gain_min(); - if(gain > maxgain) { - txvga_gain = maxgain; - } - else if(gain < mingain) { - txvga_gain = mingain; - } - else { - txvga_gain = gain; - } - - float V_maxgain = 1.4; - float V_mingain = 0.1; - float V_fullscale = 3.3; - float dac_value = ((txvga_gain-mingain)*(V_maxgain-V_mingain)/ - (maxgain-mingain) + V_mingain)*4096/V_fullscale; - - assert(dac_value>=0 && dac_value<4096); - printf("DAC value %f\n", dac_value); - - return d_usrp->write_aux_dac(d_which, 1, (int)(dac_value)); -} - -double -db_wbx_lo_tx::_refclk_freq() -{ - return wbx_base::_refclk_freq(); -} - -bool -db_wbx_lo_tx::_rx_write_io(int value, int mask) -{ - return wbx_base::_rx_write_io(value, mask); -} - -bool -db_wbx_lo_tx::_lock_detect() -{ - return wbx_base::_lock_detect(); -} - -usrp_basic* -db_wbx_lo_tx::usrp() -{ - return d_usrp; -} - - -/****************************************************************************/ - - -db_wbx_lo_rx::db_wbx_lo_rx(usrp_basic_sptr usrp, int which) - : _lo_common(), - wbx_base_rx(usrp, which) -{ -} - -db_wbx_lo_rx::~db_wbx_lo_rx() -{ -} - -float -db_wbx_lo_rx::gain_min() -{ - return d_usrp->pga_min(); -} - -float -db_wbx_lo_rx::gain_max() -{ - return d_usrp->pga_max() + 45; -} - -float -db_wbx_lo_rx::gain_db_per_step() -{ - return 0.05; -} - -double -db_wbx_lo_rx::_refclk_freq() -{ - return wbx_base::_refclk_freq(); -} - -bool -db_wbx_lo_rx::_rx_write_io(int value, int mask) -{ - return wbx_base::_rx_write_io(value, mask); -} - -bool -db_wbx_lo_rx::_lock_detect() -{ - return wbx_base::_lock_detect(); -} - -usrp_basic* -db_wbx_lo_rx::usrp() -{ - return d_usrp; -} |