diff options
Diffstat (limited to 'usrp/fpga/toplevel/sizetest')
| -rw-r--r-- | usrp/fpga/toplevel/sizetest/.gitignore | 15 | ||||
| -rw-r--r-- | usrp/fpga/toplevel/sizetest/sizetest.csf | 160 | ||||
| -rw-r--r-- | usrp/fpga/toplevel/sizetest/sizetest.psf | 228 | ||||
| -rw-r--r-- | usrp/fpga/toplevel/sizetest/sizetest.quartus | 19 | ||||
| -rw-r--r-- | usrp/fpga/toplevel/sizetest/sizetest.ssf | 14 | ||||
| -rw-r--r-- | usrp/fpga/toplevel/sizetest/sizetest.v | 39 |
6 files changed, 0 insertions, 475 deletions
diff --git a/usrp/fpga/toplevel/sizetest/.gitignore b/usrp/fpga/toplevel/sizetest/.gitignore deleted file mode 100644 index 201434ddc..000000000 --- a/usrp/fpga/toplevel/sizetest/.gitignore +++ /dev/null @@ -1,15 +0,0 @@ -/*.qws -/*.eqn -/*.done -/*.htm -/*.rpt -/*.ini -/*.fsf -/*.jam -/*.jbc -/*.pin -/*.pof -/*.sof -/*.rbf -/*.ttf -/db diff --git a/usrp/fpga/toplevel/sizetest/sizetest.csf b/usrp/fpga/toplevel/sizetest/sizetest.csf deleted file mode 100644 index 4b724e7f5..000000000 --- a/usrp/fpga/toplevel/sizetest/sizetest.csf +++ /dev/null @@ -1,160 +0,0 @@ -COMPILER_SETTINGS -{ - IO_PLACEMENT_OPTIMIZATION = OFF; - ENABLE_DRC_SETTINGS = OFF; - PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF; - PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF; - PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF; - DRC_FANOUT_EXCEEDING = 30; - DRC_REPORT_FANOUT_EXCEEDING = OFF; - DRC_TOP_FANOUT = 50; - DRC_REPORT_TOP_FANOUT = OFF; - RUN_DRC_DURING_COMPILATION = OFF; - ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON; - ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF; - ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF; - ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF; - SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF; - MERGE_HEX_FILE = OFF; - TRUE_WYSIWYG_FLOW = OFF; - SEED = 1; - FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY; - FAMILY = Cyclone; - DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; - DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; - DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; - DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; - DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1"; - DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1"; - DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; - DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; - DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; - DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; - DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; - DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; - DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; - DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; - DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; - DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB"; - DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3"; - DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; - DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; - DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4"; - DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3"; - DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS"; - DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS"; - DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS"; - STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; - PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; - PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2"; - STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1"; - FAST_FIT_COMPILATION = OFF; - SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF; - OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = OFF; - OPTIMIZE_TIMING = OFF; - OPTIMIZE_HOLD_TIMING = OFF; - COMPILATION_LEVEL = FULL; - SAVE_DISK_SPACE = ON; - SPEED_DISK_USAGE_TRADEOFF = NORMAL; - LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF; - SIGNALPROBE_ALLOW_OVERUSE = OFF; - FOCUS_ENTITY_NAME = |sizetest; - FIT_ONLY_ONE_ATTEMPT = OFF; -} -DEFAULT_DEVICE_OPTIONS -{ - GENERATE_CONFIG_HEXOUT_FILE = OFF; - GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; - GENERATE_CONFIG_JBC_FILE = OFF; - GENERATE_CONFIG_JAM_FILE = OFF; - GENERATE_CONFIG_ISC_FILE = OFF; - GENERATE_CONFIG_SVF_FILE = OFF; - GENERATE_JBC_FILE_COMPRESSED = ON; - GENERATE_JBC_FILE = OFF; - GENERATE_JAM_FILE = OFF; - GENERATE_ISC_FILE = OFF; - GENERATE_SVF_FILE = OFF; - RESERVE_PIN = "AS INPUT TRI-STATED"; - RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND"; - HEXOUT_FILE_COUNT_DIRECTION = UP; - HEXOUT_FILE_START_ADDRESS = 0; - GENERATE_HEX_FILE = OFF; - GENERATE_RBF_FILE = OFF; - GENERATE_TTF_FILE = OFF; - RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; - RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; - RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; - RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; - RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; - DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; - AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; - EPROM_USE_CHECKSUM_AS_USERCODE = OFF; - FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; - MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; - STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; - APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; - STRATIX_CONFIGURATION_DEVICE = AUTO; - CYCLONE_CONFIGURATION_DEVICE = AUTO; - FLEX10K_CONFIGURATION_DEVICE = AUTO; - FLEX6K_CONFIGURATION_DEVICE = AUTO; - MERCURY_CONFIGURATION_DEVICE = AUTO; - EXCALIBUR_CONFIGURATION_DEVICE = AUTO; - APEX20K_CONFIGURATION_DEVICE = AUTO; - USE_CONFIGURATION_DEVICE = ON; - ENABLE_INIT_DONE_OUTPUT = OFF; - FLEX10K_ENABLE_LOCK_OUTPUT = OFF; - ENABLE_DEVICE_WIDE_OE = OFF; - ENABLE_DEVICE_WIDE_RESET = OFF; - RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; - AUTO_RESTART_CONFIGURATION = OFF; - ENABLE_VREFB_PIN = OFF; - ENABLE_VREFA_PIN = OFF; - SECURITY_BIT = OFF; - USER_START_UP_CLOCK = OFF; - APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; - FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; - FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; - MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; - EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; - CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL"; - STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; - APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; - STRATIX_UPDATE_MODE = STANDARD; - USE_CHECKSUM_AS_USERCODE = OFF; - MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; - MAX7000_JTAG_USER_CODE = FFFFFFFF; - FLEX10K_JTAG_USER_CODE = 7F; - MERCURY_JTAG_USER_CODE = FFFFFFFF; - APEX20K_JTAG_USER_CODE = FFFFFFFF; - STRATIX_JTAG_USER_CODE = FFFFFFFF; - MAX7000S_JTAG_USER_CODE = FFFF; - RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; - FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; - FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; - ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; - MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; - ENABLE_JTAG_BST_SUPPORT = OFF; - CONFIGURATION_CLOCK_DIVISOR = 1; - CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; - CLOCK_SOURCE = INTERNAL; - COMPRESSION_MODE = OFF; - ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; -} -AUTO_SLD_HUB_ENTITY -{ - AUTO_INSERT_SLD_HUB_ENTITY = ENABLE; - HUB_INSTANCE_NAME = SLD_HUB_INST; - HUB_ENTITY_NAME = SLD_HUB; -} -CHIP(sizetest) -{ - DEVICE = EP1C12Q240C8; - DEVICE_FILTER_PACKAGE = "ANY QFP"; - DEVICE_FILTER_PIN_COUNT = 240; - DEVICE_FILTER_SPEED_GRADE = ANY; -} -SIGNALTAP_LOGIC_ANALYZER_SETTINGS -{ - ENABLE_SIGNALTAP = Off; - AUTO_ENABLE_SMART_COMPILE = On; -} diff --git a/usrp/fpga/toplevel/sizetest/sizetest.psf b/usrp/fpga/toplevel/sizetest/sizetest.psf deleted file mode 100644 index e4fc6aa27..000000000 --- a/usrp/fpga/toplevel/sizetest/sizetest.psf +++ /dev/null @@ -1,228 +0,0 @@ -DEFAULT_DESIGN_ASSISTANT_SETTINGS -{ - HCPY_ALOAD_SIGNALS = OFF; - HCPY_VREF_PINS = OFF; - HCPY_CAT = OFF; - HCPY_ILLEGAL_HC_DEV_PKG = OFF; - ACLK_RULE_IMSZER_ADOMAIN = OFF; - ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF; - ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF; - ACLK_CAT = OFF; - SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF; - SIGNALRACE_CAT = OFF; - NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF; - NONSYNCHSTRUCT_RULE_SRLATCH = OFF; - NONSYNCHSTRUCT_RULE_DLATCH = OFF; - NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF; - NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF; - NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF; - NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF; - NONSYNCHSTRUCT_RULE_REG_LOOP = OFF; - NONSYNCHSTRUCT_RULE_COMBLOOP = OFF; - NONSYNCHSTRUCT_CAT = OFF; - NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF; - TIMING_RULE_COIN_CLKEDGE = OFF; - TIMING_RULE_SHIFT_REG = OFF; - TIMING_RULE_HIGH_FANOUTS = OFF; - TIMING_CAT = OFF; - RESET_RULE_ALL = OFF; - RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF; - RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF; - RESET_RULE_REG_ASNYCH = OFF; - RESET_RULE_COMB_ASYNCH_RESET = OFF; - RESET_RULE_IMSYNCH_EXRESET = OFF; - RESET_RULE_UNSYNCH_EXRESET = OFF; - RESET_RULE_INPINS_RESETNET = OFF; - RESET_CAT = OFF; - CLK_RULE_ALL = OFF; - CLK_RULE_MIX_EDGES = OFF; - CLK_RULE_CLKNET_CLKSPINES = OFF; - CLK_RULE_INPINS_CLKNET = OFF; - CLK_RULE_GATING_SCHEME = OFF; - CLK_RULE_INV_CLOCK = OFF; - CLK_RULE_COMB_CLOCK = OFF; - CLK_CAT = OFF; - HCPY_EXCEED_USER_IO_USAGE = OFF; - HCPY_EXCEED_RAM_USAGE = OFF; - NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF; - SIGNALRACE_RULE_TRISTATE = OFF; - ASSG_RULE_MISSING_TIMING = OFF; - ASSG_RULE_MISSING_FMAX = OFF; - ASSG_CAT = OFF; -} -SYNTHESIS_FITTING_SETTINGS -{ - AUTO_SHIFT_REGISTER_RECOGNITION = ON; - AUTO_RAM_RECOGNITION = ON; - REMOVE_DUPLICATE_LOGIC = ON; - AUTO_MERGE_PLLS = ON; - AUTO_OPEN_DRAIN_PINS = ON; - AUTO_CARRY_CHAINS = ON; - AUTO_DELAY_CHAINS = ON; - STRATIX_CARRY_CHAIN_LENGTH = 70; - AUTO_PACKED_REG_CYCLONE = "MINIMIZE AREA WITH CHAINS"; - CYCLONE_OPTIMIZATION_TECHNIQUE = SPEED; - AUTO_GLOBAL_MEMORY_CONTROLS = OFF; - AUTO_GLOBAL_REGISTER_CONTROLS = ON; - AUTO_GLOBAL_CLOCK = ON; - LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF; - ENABLE_BUS_HOLD_CIRCUITRY = OFF; - WEAK_PULL_UP_RESISTOR = OFF; - IGNORE_SOFT_BUFFERS = ON; - IGNORE_LCELL_BUFFERS = OFF; - IGNORE_ROW_GLOBAL_BUFFERS = OFF; - IGNORE_GLOBAL_BUFFERS = OFF; - IGNORE_CASCADE_BUFFERS = OFF; - IGNORE_CARRY_BUFFERS = OFF; - REMOVE_DUPLICATE_REGISTERS = ON; - REMOVE_REDUNDANT_LOGIC_CELLS = OFF; - ALLOW_POWER_UP_DONT_CARE = ON; - PCI_IO = OFF; - NOT_GATE_PUSH_BACK = ON; - SLOW_SLEW_RATE = OFF; - STATE_MACHINE_PROCESSING = AUTO; -} -DEFAULT_HARDCOPY_SETTINGS -{ - HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS"; -} -DEFAULT_TIMING_REQUIREMENTS -{ - INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; - RUN_ALL_TIMING_ANALYSES = ON; - IGNORE_CLOCK_SETTINGS = OFF; - DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE"; - CUT_OFF_IO_PIN_FEEDBACK = ON; - CUT_OFF_CLEAR_AND_PRESET_PATHS = ON; - CUT_OFF_READ_DURING_WRITE_PATHS = ON; - CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON; - DO_MIN_ANALYSIS = ON; - DO_MIN_TIMING = OFF; - NUMBER_OF_PATHS_TO_REPORT = 200; - NUMBER_OF_DESTINATION_TO_REPORT = 10; - NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10; - MAX_SCC_SIZE = 50; -} -HDL_SETTINGS -{ - VERILOG_INPUT_VERSION = VERILOG_2001; - ENABLE_IP_DEBUG = OFF; - VHDL_INPUT_VERSION = VHDL93; - VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF; -} -PROJECT_INFO(sizetest) -{ - USER_LIBRARIES = "e:\fpga\megacells\"; - ORIGINAL_QUARTUS_VERSION = 3.0; - PROJECT_CREATION_TIME_DATE = "22:00:25 SEPTEMBER 28, 2003"; - LAST_QUARTUS_VERSION = 3.0; - SHOW_REGISTRATION_MESSAGE = ON; -} -THIRD_PARTY_EDA_TOOLS(sizetest) -{ - EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>"; - EDA_SIMULATION_TOOL = "<NONE>"; - EDA_TIMING_ANALYSIS_TOOL = "<NONE>"; - EDA_BOARD_DESIGN_TOOL = "<NONE>"; - EDA_FORMAL_VERIFICATION_TOOL = "<NONE>"; - EDA_RESYNTHESIS_TOOL = "<NONE>"; -} -EDA_TOOL_SETTINGS(eda_design_synthesis) -{ - EDA_INPUT_GND_NAME = GND; - EDA_INPUT_VCC_NAME = VCC; - EDA_SHOW_LMF_MAPPING_MESSAGES = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_INPUT_DATA_FORMAT = EDIF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_simulation) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_timing_analysis) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - EDA_LAUNCH_CMD_LINE_TOOL = OFF; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_board_design) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_formal_verification) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_palace) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - RESYNTHESIS_RETIMING = FULL; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; -} diff --git a/usrp/fpga/toplevel/sizetest/sizetest.quartus b/usrp/fpga/toplevel/sizetest/sizetest.quartus deleted file mode 100644 index d1eaf227a..000000000 --- a/usrp/fpga/toplevel/sizetest/sizetest.quartus +++ /dev/null @@ -1,19 +0,0 @@ -COMPILER_SETTINGS_LIST -{ - COMPILER_SETTINGS = sizetest; -} -SIMULATOR_SETTINGS_LIST -{ - SIMULATOR_SETTINGS = sizetest; -} -SOFTWARE_SETTINGS_LIST -{ - SOFTWARE_SETTINGS = Debug; - SOFTWARE_SETTINGS = Release; -} -FILES -{ - VERILOG_FILE = ..\..\sdr_lib\cordic_stage.v; - VERILOG_FILE = ..\..\sdr_lib\cordic.v; - VERILOG_FILE = sizetest.v; -} diff --git a/usrp/fpga/toplevel/sizetest/sizetest.ssf b/usrp/fpga/toplevel/sizetest/sizetest.ssf deleted file mode 100644 index 1aceab1f1..000000000 --- a/usrp/fpga/toplevel/sizetest/sizetest.ssf +++ /dev/null @@ -1,14 +0,0 @@ -SIMULATOR_SETTINGS -{ - ESTIMATE_POWER_CONSUMPTION = OFF; - GLITCH_INTERVAL = 1NS; - GLITCH_DETECTION = OFF; - SIMULATION_COVERAGE = ON; - CHECK_OUTPUTS = OFF; - SETUP_HOLD_DETECTION = OFF; - POWER_ESTIMATION_START_TIME = "0 NS"; - ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON; - SIMULATION_MODE = TIMING; - START_TIME = 0NS; - USE_COMPILER_SETTINGS = sizetest; -} diff --git a/usrp/fpga/toplevel/sizetest/sizetest.v b/usrp/fpga/toplevel/sizetest/sizetest.v deleted file mode 100644 index 5a847b961..000000000 --- a/usrp/fpga/toplevel/sizetest/sizetest.v +++ /dev/null @@ -1,39 +0,0 @@ -// -*- verilog -*- -// -// USRP - Universal Software Radio Peripheral -// -// Copyright (C) 2003 Matt Ettus -// -// This program is free software; you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation; either version 2 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program; if not, write to the Free Software -// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA -// - - -module sizetest(input clock, - input reset, - input enable, - input [15:0]xi, - input [15:0] yi, - input [15:0] zi, - output [15:0] xo, - output [15:0] yo, - output [15:0] zo -// input [15:0] constant - ); - -wire [16:0] zo; - -cordic_stage cordic_stage(clock, reset, enable, xi, yi, zi, 16'd16383, xo, yo, zo ); - -endmodule |