diff options
Diffstat (limited to 'gr-usrp/grc/usrp_dual_source_x.xml')
| -rw-r--r-- | gr-usrp/grc/usrp_dual_source_x.xml | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/gr-usrp/grc/usrp_dual_source_x.xml b/gr-usrp/grc/usrp_dual_source_x.xml new file mode 100644 index 000000000..4e1fa81d8 --- /dev/null +++ b/gr-usrp/grc/usrp_dual_source_x.xml @@ -0,0 +1,243 @@ +<?xml version="1.0"?> +<!-- +################################################### +##USRP Dual Source +################################################### + --> +<block> + <name>USRP1 Dual Source</name> + <key>usrp_dual_source_x</key> + <category>USRP</category> + <import>from grc_gnuradio import usrp as grc_usrp</import> + <make>grc_usrp.dual_source_$(type.fcn)( + which=$which, + rx_ant_a=$rx_ant_a, rx_ant_b=$rx_ant_b, + rx_source_a=$rx_source_a, rx_source_b=$rx_source_b, +) +#if $format() +self.$(id).set_format(width=$format.width, shift=$format.shift) +#end if +self.$(id).set_decim_rate($decimation) +self.$(id).set_frequency_a($frequency_a, verbose=True#slurp +#if $lo_offset_a() != float('inf') +, lo_offset=$lo_offset_a#slurp +#end if +) +self.$(id).set_frequency_b($frequency_b, verbose=True#slurp +#if $lo_offset_b() != float('inf') +, lo_offset=$lo_offset_b#slurp +#end if +) +self.$(id).set_gain_a($gain_a) +self.$(id).set_gain_b($gain_b)</make> + <callback>set_decim_rate($decimation)</callback> + <callback>set_frequency_a($frequency_a#slurp +#if $lo_offset_a() != float('inf') +, lo_offset=$lo_offset_a#slurp +#end if +)</callback> + <callback>set_frequency_b($frequency_b#slurp +#if $lo_offset_b() != float('inf') +, lo_offset=$lo_offset_b#slurp +#end if +)</callback> + <callback>set_gain_a($gain_a)</callback> + <callback>set_gain_b($gain_b)</callback> + <param> + <name>Output Type</name> + <key>type</key> + <type>enum</type> + <option> + <name>Complex</name> + <key>complex</key> + <opt>fcn:c</opt> + </option> + <option> + <name>Short</name> + <key>short</key> + <opt>fcn:s</opt> + </option> + </param> + <param> + <name>Format</name> + <key>format</key> + <value></value> + <type>enum</type> + <hide>#if $format() then '' else 'part'#</hide> + <option> + <name>16 Bits (Default)</name> + <key></key> + <opt>width:16</opt> + <opt>shift:0</opt> + </option> + <option> + <name>8 Bits, Shift 8</name> + <key>w8_s8</key> + <opt>width:8</opt> + <opt>shift:8</opt> + </option> + </param> + <param> + <name>Unit Number</name> + <key>which</key> + <value>0</value> + <type>int</type> + </param> + <param> + <name>Decimation</name> + <key>decimation</key> + <type>int</type> + </param> + <param> + <name>Frequency A (Hz)</name> + <key>frequency_a</key> + <type>real</type> + </param> + <param> + <name>Frequency B (Hz)</name> + <key>frequency_b</key> + <type>real</type> + </param> + <param> + <name>LO Offset A (Hz)</name> + <key>lo_offset_a</key> + <value>float('inf')</value> + <type>real</type> + <hide>#if $lo_offset_a() == float('inf') then 'part' else 'none'#</hide> + <option> + <name>Default</name> + <key>float('inf')</key> + </option> + </param> + <param> + <name>LO Offset B (Hz)</name> + <key>lo_offset_b</key> + <value>float('inf')</value> + <type>real</type> + <hide>#if $lo_offset_b() == float('inf') then 'part' else 'none'#</hide> + <option> + <name>Default</name> + <key>float('inf')</key> + </option> + </param> + <param> + <name>Gain A (dB)</name> + <key>gain_a</key> + <value>0</value> + <type>real</type> + </param> + <param> + <name>Gain B (dB)</name> + <key>gain_b</key> + <value>0</value> + <type>real</type> + </param> +<!-- +################################################### +## Antenna A +################################################### + --> + <param> + <name>RX Antenna A</name> + <key>rx_ant_a</key> + <value>RXA</value> + <type>string</type> + <option> + <name>RXA</name> + <key>RXA</key> + </option> + <option> + <name>RXB</name> + <key>RXB</key> + </option> + <option> + <name>RXAB</name> + <key>RXAB</key> + </option> + <option> + <name>TX/RX</name> + <key>TX/RX</key> + </option> + <option> + <name>RX2</name> + <key>RX2</key> + </option> + </param> +<!-- +################################################### +## Antenna B +################################################### + --> + <param> + <name>RX Antenna B</name> + <key>rx_ant_b</key> + <value>RXA</value> + <type>string</type> + <option> + <name>RXA</name> + <key>RXA</key> + </option> + <option> + <name>RXB</name> + <key>RXB</key> + </option> + <option> + <name>RXAB</name> + <key>RXAB</key> + </option> + <option> + <name>TX/RX</name> + <key>TX/RX</key> + </option> + <option> + <name>RX2</name> + <key>RX2</key> + </option> + </param> + <param> + <name>RX Source A</name> + <key>rx_source_a</key> + <value>A</value> + <type>string</type> + <hide>#if $rx_source_a() == 'A' then 'part' else 'none'#</hide> + <option> + <name>Side A</name> + <key>A</key> + </option> + <option> + <name>Side B</name> + <key>B</key> + </option> + </param> + <param> + <name>RX Source B</name> + <key>rx_source_b</key> + <value>B</value> + <type>string</type> + <hide>#if $rx_source_b() == 'B' then 'part' else 'none'#</hide> + <option> + <name>Side A</name> + <key>A</key> + </option> + <option> + <name>Side B</name> + <key>B</key> + </option> + </param> + <source> + <name>Aout</name> + <type>$type</type> + </source> + <source> + <name>Bout</name> + <type>$type</type> + </source> + <doc> +The USRP source outputs 64 Megasamples per second / decimation. + +The "Receive Antenna Setting" selects one of the SMA connectors as the data source. \ +Flex RF boards use the "TX/RX" and "RX2" settings. \ +Basic RX and LFRX use the "RXA", "RXB", and "RXAB" settings. \ +All other boards use the "RXA" setting. + </doc> +</block> |