diff options
Diffstat (limited to 'gr-sounder/src/fpga/top/usrp_sounder.psf')
| -rw-r--r-- | gr-sounder/src/fpga/top/usrp_sounder.psf | 312 |
1 files changed, 0 insertions, 312 deletions
diff --git a/gr-sounder/src/fpga/top/usrp_sounder.psf b/gr-sounder/src/fpga/top/usrp_sounder.psf deleted file mode 100644 index 7bd32ff59..000000000 --- a/gr-sounder/src/fpga/top/usrp_sounder.psf +++ /dev/null @@ -1,312 +0,0 @@ -DEFAULT_DESIGN_ASSISTANT_SETTINGS -{ - HCPY_ALOAD_SIGNALS = OFF; - HCPY_VREF_PINS = OFF; - HCPY_CAT = OFF; - HCPY_ILLEGAL_HC_DEV_PKG = OFF; - ACLK_RULE_IMSZER_ADOMAIN = OFF; - ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF; - ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF; - ACLK_CAT = OFF; - SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF; - SIGNALRACE_CAT = OFF; - NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF; - NONSYNCHSTRUCT_RULE_SRLATCH = OFF; - NONSYNCHSTRUCT_RULE_DLATCH = OFF; - NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF; - NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF; - NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF; - NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF; - NONSYNCHSTRUCT_RULE_REG_LOOP = OFF; - NONSYNCHSTRUCT_RULE_COMBLOOP = OFF; - NONSYNCHSTRUCT_CAT = OFF; - NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF; - TIMING_RULE_COIN_CLKEDGE = OFF; - TIMING_RULE_SHIFT_REG = OFF; - TIMING_RULE_HIGH_FANOUTS = OFF; - TIMING_CAT = OFF; - RESET_RULE_ALL = OFF; - RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF; - RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF; - RESET_RULE_REG_ASNYCH = OFF; - RESET_RULE_COMB_ASYNCH_RESET = OFF; - RESET_RULE_IMSYNCH_EXRESET = OFF; - RESET_RULE_UNSYNCH_EXRESET = OFF; - RESET_RULE_INPINS_RESETNET = OFF; - RESET_CAT = OFF; - CLK_RULE_ALL = OFF; - CLK_RULE_MIX_EDGES = OFF; - CLK_RULE_CLKNET_CLKSPINES = OFF; - CLK_RULE_INPINS_CLKNET = OFF; - CLK_RULE_GATING_SCHEME = OFF; - CLK_RULE_INV_CLOCK = OFF; - CLK_RULE_COMB_CLOCK = OFF; - CLK_CAT = OFF; - HCPY_EXCEED_USER_IO_USAGE = OFF; - HCPY_EXCEED_RAM_USAGE = OFF; - NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF; - SIGNALRACE_RULE_TRISTATE = OFF; - ASSG_RULE_MISSING_TIMING = OFF; - ASSG_RULE_MISSING_FMAX = OFF; - ASSG_CAT = OFF; -} -SYNTHESIS_FITTING_SETTINGS -{ - AUTO_SHIFT_REGISTER_RECOGNITION = ON; - AUTO_DSP_RECOGNITION = ON; - AUTO_RAM_RECOGNITION = ON; - REMOVE_DUPLICATE_LOGIC = ON; - AUTO_TURBO_BIT = ON; - AUTO_MERGE_PLLS = ON; - AUTO_OPEN_DRAIN_PINS = ON; - AUTO_PARALLEL_EXPANDERS = ON; - AUTO_FAST_OUTPUT_ENABLE_REGISTERS = OFF; - AUTO_FAST_OUTPUT_REGISTERS = OFF; - AUTO_FAST_INPUT_REGISTERS = OFF; - AUTO_CASCADE_CHAINS = ON; - AUTO_CARRY_CHAINS = ON; - AUTO_DELAY_CHAINS = ON; - MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH = 4; - PARALLEL_EXPANDER_CHAIN_LENGTH = 16; - CASCADE_CHAIN_LENGTH = 2; - STRATIX_CARRY_CHAIN_LENGTH = 70; - MERCURY_CARRY_CHAIN_LENGTH = 48; - FLEX10K_CARRY_CHAIN_LENGTH = 32; - FLEX6K_CARRY_CHAIN_LENGTH = 32; - CARRY_CHAIN_LENGTH = 48; - CARRY_OUT_PINS_LCELL_INSERT = ON; - NORMAL_LCELL_INSERT = ON; - AUTO_LCELL_INSERTION = ON; - ALLOW_XOR_GATE_USAGE = ON; - AUTO_PACKED_REGISTERS_STRATIX = NORMAL; - AUTO_PACKED_REGISTERS = OFF; - AUTO_PACKED_REG_CYCLONE = NORMAL; - FLEX10K_OPTIMIZATION_TECHNIQUE = AREA; - FLEX6K_OPTIMIZATION_TECHNIQUE = AREA; - MERCURY_OPTIMIZATION_TECHNIQUE = AREA; - APEX20K_OPTIMIZATION_TECHNIQUE = SPEED; - MAX7000_OPTIMIZATION_TECHNIQUE = SPEED; - STRATIX_OPTIMIZATION_TECHNIQUE = SPEED; - CYCLONE_OPTIMIZATION_TECHNIQUE = AREA; - FLEX10K_TECHNOLOGY_MAPPER = LUT; - FLEX6K_TECHNOLOGY_MAPPER = LUT; - MERCURY_TECHNOLOGY_MAPPER = LUT; - APEX20K_TECHNOLOGY_MAPPER = LUT; - MAX7000_TECHNOLOGY_MAPPER = "PRODUCT TERM"; - STRATIX_TECHNOLOGY_MAPPER = LUT; - AUTO_IMPLEMENT_IN_ROM = OFF; - AUTO_GLOBAL_MEMORY_CONTROLS = OFF; - AUTO_GLOBAL_REGISTER_CONTROLS = ON; - AUTO_GLOBAL_OE = ON; - AUTO_GLOBAL_CLOCK = ON; - USE_LPM_FOR_AHDL_OPERATORS = ON; - LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF; - ENABLE_BUS_HOLD_CIRCUITRY = OFF; - WEAK_PULL_UP_RESISTOR = OFF; - TURBO_BIT = ON; - MAX7000_IGNORE_SOFT_BUFFERS = OFF; - IGNORE_SOFT_BUFFERS = ON; - MAX7000_IGNORE_LCELL_BUFFERS = AUTO; - IGNORE_LCELL_BUFFERS = OFF; - IGNORE_ROW_GLOBAL_BUFFERS = OFF; - IGNORE_GLOBAL_BUFFERS = OFF; - IGNORE_CASCADE_BUFFERS = OFF; - IGNORE_CARRY_BUFFERS = OFF; - REMOVE_DUPLICATE_REGISTERS = ON; - REMOVE_REDUNDANT_LOGIC_CELLS = OFF; - ALLOW_POWER_UP_DONT_CARE = ON; - PCI_IO = OFF; - NOT_GATE_PUSH_BACK = ON; - SLOW_SLEW_RATE = OFF; - DSP_BLOCK_BALANCING = AUTO; - STATE_MACHINE_PROCESSING = AUTO; -} -DEFAULT_HARDCOPY_SETTINGS -{ - HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS"; -} -DEFAULT_TIMING_REQUIREMENTS -{ - INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; - RUN_ALL_TIMING_ANALYSES = ON; - IGNORE_CLOCK_SETTINGS = OFF; - DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE"; - CUT_OFF_IO_PIN_FEEDBACK = ON; - CUT_OFF_CLEAR_AND_PRESET_PATHS = ON; - CUT_OFF_READ_DURING_WRITE_PATHS = ON; - CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON; - DO_MIN_ANALYSIS = ON; - DO_MIN_TIMING = OFF; - NUMBER_OF_PATHS_TO_REPORT = 200; - NUMBER_OF_DESTINATION_TO_REPORT = 10; - NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10; - MAX_SCC_SIZE = 50; -} -HDL_SETTINGS -{ - VERILOG_INPUT_VERSION = VERILOG_2001; - ENABLE_IP_DEBUG = OFF; - VHDL_INPUT_VERSION = VHDL93; - VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF; -} -PROJECT_INFO(usrp_sounder) -{ - ORIGINAL_QUARTUS_VERSION = 3.0; - PROJECT_CREATION_TIME_DATE = "00:14:04 JULY 13, 2003"; - LAST_QUARTUS_VERSION = 3.0; - SHOW_REGISTRATION_MESSAGE = ON; - USER_LIBRARIES = "h:\\gnuradio\\trunk\\usrp\\fpga\\megacells"; -} -THIRD_PARTY_EDA_TOOLS(usrp_sounder) -{ - EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>"; - EDA_SIMULATION_TOOL = "<NONE>"; - EDA_TIMING_ANALYSIS_TOOL = "<NONE>"; - EDA_BOARD_DESIGN_TOOL = "<NONE>"; - EDA_FORMAL_VERIFICATION_TOOL = "<NONE>"; - EDA_RESYNTHESIS_TOOL = "<NONE>"; -} -EDA_TOOL_SETTINGS(eda_design_synthesis) -{ - EDA_INPUT_GND_NAME = GND; - EDA_INPUT_VCC_NAME = VCC; - EDA_SHOW_LMF_MAPPING_MESSAGES = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_INPUT_DATA_FORMAT = EDIF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_simulation) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_timing_analysis) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - EDA_LAUNCH_CMD_LINE_TOOL = OFF; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_board_design) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_formal_verification) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - RESYNTHESIS_RETIMING = FULL; -} -EDA_TOOL_SETTINGS(eda_palace) -{ - EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; - EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; - EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; - EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; - EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; - EDA_FLATTEN_BUSES = OFF; - EDA_MAP_ILLEGAL_CHARACTERS = OFF; - EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; - EDA_RUN_TOOL_AUTOMATICALLY = OFF; - EDA_OUTPUT_DATA_FORMAT = NONE; - RESYNTHESIS_RETIMING = FULL; - RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; - RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; - USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; -} -CLOCK(clk_120mhz) -{ - FMAX_REQUIREMENT = "120.0 MHz"; - INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; - DUTY_CYCLE = 50; - DIVIDE_BASE_CLOCK_PERIOD_BY = 1; - MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; - INVERT_BASE_CLOCK = OFF; -} -CLOCK(usbclk) -{ - FMAX_REQUIREMENT = "48.0 MHz"; - INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; - DUTY_CYCLE = 50; - DIVIDE_BASE_CLOCK_PERIOD_BY = 1; - MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; - INVERT_BASE_CLOCK = OFF; -} -CLOCK(SCLK) -{ - FMAX_REQUIREMENT = "1.0 MHz"; - INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; - DUTY_CYCLE = 50; - DIVIDE_BASE_CLOCK_PERIOD_BY = 1; - MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; - INVERT_BASE_CLOCK = OFF; -} -CLOCK(adclk0) -{ - FMAX_REQUIREMENT = "60.0 MHz"; - INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; - DUTY_CYCLE = 50; - DIVIDE_BASE_CLOCK_PERIOD_BY = 1; - MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; - INVERT_BASE_CLOCK = OFF; -} -CLOCK(adclk1) -{ - FMAX_REQUIREMENT = "60.0 MHz"; - INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; - DUTY_CYCLE = 50; - DIVIDE_BASE_CLOCK_PERIOD_BY = 1; - MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; - INVERT_BASE_CLOCK = OFF; -} |