diff options
Diffstat (limited to 'gr-radar-mono/src/fpga')
25 files changed, 2447 insertions, 0 deletions
diff --git a/gr-radar-mono/src/fpga/Makefile.am b/gr-radar-mono/src/fpga/Makefile.am new file mode 100644 index 000000000..d2c0101bb --- /dev/null +++ b/gr-radar-mono/src/fpga/Makefile.am @@ -0,0 +1,24 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +SUBDIRS = lib top tb diff --git a/gr-radar-mono/src/fpga/lib/Makefile.am b/gr-radar-mono/src/fpga/lib/Makefile.am new file mode 100644 index 000000000..f8b156791 --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/Makefile.am @@ -0,0 +1,33 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +EXTRA_DIST = \ + radar.v \ + radar_config.vh \ + radar_control.v \ + radar_tx.v \ + radar_rx.v \ + dac_interface.v \ + cordic_nco.v + +MOSTLYCLEANFILES = *~ diff --git a/gr-radar-mono/src/fpga/lib/cordic_nco.v b/gr-radar-mono/src/fpga/lib/cordic_nco.v new file mode 100644 index 000000000..ef13aa2d8 --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/cordic_nco.v @@ -0,0 +1,54 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +module cordic_nco(clk_i,rst_i,ena_i,strobe_i,ampl_i,freq_i,phs_i,data_i_o,data_q_o); + input clk_i; + input rst_i; + input ena_i; + input strobe_i; + + input [15:0] ampl_i; + input [31:0] freq_i; + input [31:0] phs_i; + + output [15:0] data_i_o; + output [15:0] data_q_o; + + reg [31:0] phase_reg; + wire [31:0] phase = phase_reg + phs_i; + wire [15:0] ampl; + + always @(posedge clk_i) + begin + if (rst_i | ~ena_i) + phase_reg <= 32'b0; + else if (strobe_i) + phase_reg <= phase_reg + freq_i; + end + + assign ampl = ena_i ? ampl_i : 16'b0; + + cordic tx_cordic + (.clock(clk_i),.reset(rst_in),.enable(strobe_i), + .xi(ampl),.yi(16'b0),.zi(phase[31:16]), + .xo(data_i_o),.yo(data_q_o),.zo()); + +endmodule // cordic_nco diff --git a/gr-radar-mono/src/fpga/lib/dac_interface.v b/gr-radar-mono/src/fpga/lib/dac_interface.v new file mode 100644 index 000000000..209aebd96 --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/dac_interface.v @@ -0,0 +1,60 @@ +// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+`include "../top/config.vh"
+
+module dac_interface(clk_i,rst_i,ena_i,strobe_i,tx_i_i,tx_q_i,tx_data_o,tx_sync_o);
+ input clk_i;
+ input rst_i;
+ input ena_i;
+ input strobe_i;
+
+ input [13:0] tx_i_i;
+ input [13:0] tx_q_i;
+
+ output [13:0] tx_data_o;
+ output tx_sync_o;
+
+`ifdef TX_RATE_MAX
+ wire clk128;
+ reg clk64_d;
+ reg [13:0] tx_data_o;
+
+ // Create a 128 MHz clock
+ dacpll pll128(.areset(rst_i),.inclk0(clk_i),.c0(clk128));
+
+ // Register the clk64 clock in the clk128 domain
+ always @(posedge clk128)
+ clk64_d <= clk_i;
+
+ // Register the tx data in the clk128 domain
+ always @(posedge clk128)
+ tx_data_o <= clk64_d ? tx_i_i : tx_q_i;
+
+ assign tx_sync_o = clk64_d;
+
+
+`else // !`ifdef TX_RATE_MAX
+ assign tx_data_o = strobe_i ? tx_i_i : tx_q_i;
+ assign tx_sync_o = strobe_i;
+`endif // !`ifdef TX_RATE_MAX
+
+endmodule // dac_interface
diff --git a/gr-radar-mono/src/fpga/lib/radar.v b/gr-radar-mono/src/fpga/lib/radar.v new file mode 100644 index 000000000..c6690f4c7 --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/radar.v @@ -0,0 +1,71 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`include "../lib/radar_config.vh" + +module radar(clk_i,saddr_i,sdata_i,s_strobe_i, + tx_strobe_i,tx_dac_i_o,tx_dac_q_o, + rx_strobe_i,rx_adc_i_i,rx_adc_q_i, + rx_strobe_o,rx_ech_i_o,rx_ech_q_o); + + // System interface + input clk_i; // Master clock @ 64 MHz + input [6:0] saddr_i; // Configuration bus address + input [31:0] sdata_i; // Configuration bus data + input s_strobe_i; // Configuration bus write + + // Transmit subsystem + input tx_strobe_i; // Generate an transmitter output sample + output [13:0] tx_dac_i_o; // I channel transmitter output to DAC + output [13:0] tx_dac_q_o; // Q channel transmitter output to DAC + + // Receive subsystem + input rx_strobe_i; // Indicates receive sample ready from ADC + input [15:0] rx_adc_i_i; // I channel input from ADC + input [15:0] rx_adc_q_i; // Q channel input from ADC + output rx_strobe_o; // Indicates output samples ready for Rx FIFO + output [15:0] rx_ech_i_o; // I channel processed echos to Rx FIFO + output [15:0] rx_ech_q_o; // Q channel processed echos to Rx FIFO + + wire reset; // Master application reset + wire tx_enable; // Transmitter enable + wire rx_enable; // Receiver enable + + wire [15:0] ampl; + wire [31:0] freq; // temporary + + radar_control controller + (.clk_i(clk_i),.rst_i(1'b0),.ena_i(1'b1), + .s_strobe_i(s_strobe_i),.saddr_i(saddr_i),.sdata_i(sdata_i), + .reset_o(reset),.tx_ena_o(tx_enable),.rx_ena_o(rx_enable), + .ampl_o(ampl),.freq_o(freq)); + + radar_tx transmitter + ( .clk_i(clk_i),.rst_i(reset),.ena_i(tx_enable), + .ampl_i(ampl),.freq_i(freq), + .strobe_i(tx_strobe_i),.tx_i_o(tx_dac_i_o),.tx_q_o(tx_dac_q_o) ); + + radar_rx receiver + ( .clk_i(clk_i),.rst_i(reset),.ena_i(rx_enable), + .strobe_i(rx_strobe_i),.rx_in_i_i(rx_adc_i_i),.rx_in_q_i(rx_adc_q_i), + .rx_strobe_o(rx_strobe_o),.rx_i_o(rx_ech_i_o),.rx_q_o(rx_ech_q_o) ); + +endmodule // radar diff --git a/gr-radar-mono/src/fpga/lib/radar_config.vh b/gr-radar-mono/src/fpga/lib/radar_config.vh new file mode 100644 index 000000000..d17cda123 --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/radar_config.vh @@ -0,0 +1,31 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`include "../../../../usrp/firmware/include/fpga_regs_common.v" +`include "../../../../usrp/firmware/include/fpga_regs_standard.v" + +`define FR_RADAR_MODE `FR_USER_0 +`define bmFR_RADAR_MODE_RESET 32'h0001 +`define bmFR_RADAR_MODE_TX 32'h0002 +`define bmFR_RADAR_MODE_RX 32'h0004 + +`define FR_RADAR_AMPL `FR_USER_5 +`define FR_RADAR_FREQ1N `FR_USER_8 diff --git a/gr-radar-mono/src/fpga/lib/radar_control.v b/gr-radar-mono/src/fpga/lib/radar_control.v new file mode 100644 index 000000000..9aa2e217b --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/radar_control.v @@ -0,0 +1,59 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`include "../lib/radar_config.vh" + +module radar_control(clk_i,rst_i,ena_i,saddr_i,sdata_i,s_strobe_i, + reset_o,tx_ena_o,rx_ena_o,ampl_o,freq_o); + + // System interface + input clk_i; // Master clock @ 64 MHz + input rst_i; // Master reset + input ena_i; // Module level enable + input [6:0] saddr_i; // Configuration bus address + input [31:0] sdata_i; // Configuration bus data + input s_strobe_i; // Configuration bus write + + // Configuration outputs + output reset_o; + output tx_ena_o; + output rx_ena_o; + + output [15:0] ampl_o; + output [31:0] freq_o; + + // Internal configuration + wire lp_ena; + wire dr_ena; + wire md_ena; + wire [1:0] chirps; + + // Configuration from host + setting_reg #(`FR_RADAR_MODE) sr_mode(.clock(clk_i),.reset(rst_i),.strobe(s_strobe_i),.addr(saddr_i),.in(sdata_i), + .out({chirps,md_ena,dr_ena,lp_ena,rx_ena_o,tx_ena_o,reset_o})); + + setting_reg #(`FR_RADAR_AMPL) sr_ampl(.clock(clk_i),.reset(rst_i),.strobe(s_strobe_i),.addr(saddr_i),.in(sdata_i), + .out(ampl_o)); + + setting_reg #(`FR_RADAR_FREQ1N) sr_freq(.clock(clk_i),.reset(rst_i),.strobe(s_strobe_i),.addr(saddr_i),.in(sdata_i), + .out(freq_o)); + +endmodule // radar_control diff --git a/gr-radar-mono/src/fpga/lib/radar_rx.v b/gr-radar-mono/src/fpga/lib/radar_rx.v new file mode 100644 index 000000000..a6c7409f8 --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/radar_rx.v @@ -0,0 +1,64 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`include "../../../../usrp/firmware/include/fpga_regs_common.v" +`include "../../../../usrp/firmware/include/fpga_regs_standard.v" + +module radar_rx(clk_i,rst_i,ena_i,strobe_i,saddr_i,sdata_i,s_strobe_i,rx_in_i_i,rx_in_q_i, + rx_i_o,rx_q_o,rx_strobe_o); + + input clk_i; + input rst_i; + input ena_i; + input strobe_i; + + input [6:0] saddr_i; + input [31:0] sdata_i; + input s_strobe_i; + + input [15:0] rx_in_i_i; + input [15:0] rx_in_q_i; + + output [15:0] rx_i_o; + output [15:0] rx_q_o; + output rx_strobe_o; + + // Just count up for debugging + reg [31:0] counter; + + always @(posedge clk_i) + begin + if (rst_i | ~ena_i) + counter <= 32'b0; + else if (strobe_i & rx_strobe_o) + counter <= counter + 32'b1; + end + + assign rx_i_o = ena_i ? counter[31:16] : 16'b0; + assign rx_q_o = ena_i ? counter[15:0] : 16'b0; + + // Temporarily we duplicate what master_control.v did to generate decim_strobe + // so we can do receive debugging. Later we'll drive rx_strobe_o in bursts to + // load receiver data into the rx fifo. + strobe_gen rx_strobe_gen + ( .clock(clk_i),.reset(rst_i),.enable(ena_i),.rate(7),.strobe_in(strobe_i),.strobe(rx_strobe_o) ); + +endmodule // radar_rx diff --git a/gr-radar-mono/src/fpga/lib/radar_tx.v b/gr-radar-mono/src/fpga/lib/radar_tx.v new file mode 100644 index 000000000..ffb16fa70 --- /dev/null +++ b/gr-radar-mono/src/fpga/lib/radar_tx.v @@ -0,0 +1,46 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +module radar_tx(clk_i,rst_i,ena_i,strobe_i,ampl_i,freq_i,tx_i_o,tx_q_o); + // System control + input clk_i; + input rst_i; + input ena_i; + input strobe_i; + + // Configuration + input [15:0] ampl_i; + input [31:0] freq_i; + + // Output + output [13:0] tx_i_o; + output [13:0] tx_q_o; + + wire [15:0] cordic_i, cordic_q; + + cordic_nco nco(.clk_i(clk_i),.rst_i(rst_i),.ena_i(ena_i),.strobe_i(strobe_i), + .ampl_i(ampl_i),.freq_i(freq_i),.phs_i(0), + .data_i_o(cordic_i),.data_q_o(cordic_q)); + + assign tx_i_o = cordic_i[13:0]; + assign tx_q_o = cordic_q[13:0]; + +endmodule // radar_tx diff --git a/gr-radar-mono/src/fpga/tb/Makefile.am b/gr-radar-mono/src/fpga/tb/Makefile.am new file mode 100644 index 000000000..9e3aef3a5 --- /dev/null +++ b/gr-radar-mono/src/fpga/tb/Makefile.am @@ -0,0 +1,30 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +EXTRA_DIST = \ + radar_tb.v \ + radar_tb.sav \ + radar_tb.sh \ + radar_tb_wave.sh + +MOSTLYCLEANFILES = *~ *.vcd *.out* radar_tb diff --git a/gr-radar-mono/src/fpga/tb/radar_tb.sav b/gr-radar-mono/src/fpga/tb/radar_tb.sav new file mode 100644 index 000000000..a4015a764 --- /dev/null +++ b/gr-radar-mono/src/fpga/tb/radar_tb.sav @@ -0,0 +1,23 @@ +*-20.535921 1109000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 +@28 +radar_tb.clk +radar_tb.ena +radar_tb.rst +radar_tb.uut.reset +radar_tb.uut.tx_enable +radar_tb.uut.rx_enable +@200 +- +@24 +radar_tb.uut.freq[31:0] +@421 +radar_tb.uut.controller.ampl_o[15:0] +@200 +- +@28 +radar_tb.tx_strobe +@8420 +radar_tb.uut.tx_dac_i_o[13:0] +radar_tb.uut.tx_dac_q_o[13:0] +@200 +- diff --git a/gr-radar-mono/src/fpga/tb/radar_tb.sh b/gr-radar-mono/src/fpga/tb/radar_tb.sh new file mode 100755 index 000000000..a255ec854 --- /dev/null +++ b/gr-radar-mono/src/fpga/tb/radar_tb.sh @@ -0,0 +1,3 @@ +#!/bin/sh +iverilog -y ../lib/ -y ../../../../usrp/fpga/sdr_lib \ + radar_tb.v -o radar_tb && ./radar_tb > radar_tb.out diff --git a/gr-radar-mono/src/fpga/tb/radar_tb.v b/gr-radar-mono/src/fpga/tb/radar_tb.v new file mode 100644 index 000000000..5551a1672 --- /dev/null +++ b/gr-radar-mono/src/fpga/tb/radar_tb.v @@ -0,0 +1,182 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +`timescale 1ns/1ps + +`include "../lib/radar.v" + +module radar_tb; + + // System bus + reg clk; + reg rst; + reg ena; + + // Configuration bus + reg [6:0] saddr; + reg [31:0] sdata; + reg s_strobe; + + // DAC bus + reg tx_strobe; + wire [13:0] tx_dac_i; + wire [13:0] tx_dac_q; + + // ADC bus + reg rx_strobe; + reg [15:0] rx_adc_i; + reg [15:0] rx_adc_q; + + // FIFO bus + wire fifo_strobe; + wire [15:0] fifo_i; + wire [15:0] fifo_q; + + // Configuration shadow registers + reg [31:0] mode; + + radar uut + (.clk_i(clk),.saddr_i(saddr),.sdata_i(sdata),.s_strobe_i(s_strobe), + .tx_strobe_i(tx_strobe),.tx_dac_i_o(tx_dac_i),.tx_dac_q_o(tx_dac_q), + .rx_strobe_i(rx_strobe),.rx_adc_i_i(rx_adc_i),.rx_adc_q_i(rx_adc_q), + .rx_strobe_o(fifo_strobe),.rx_ech_i_o(fifo_i),.rx_ech_q_o(fifo_q)); + + // Drive tx_strobe @ half clock rate + always @(posedge clk) + tx_strobe <= ~tx_strobe; + + // Start up initialization + initial + begin + clk = 0; + rst = 0; + ena = 0; + saddr = 0; + sdata = 0; + s_strobe = 0; + tx_strobe = 0; + rx_strobe = 1; + rx_adc_i = 0; + rx_adc_q = 0; + mode = 0; + + @(posedge clk); + rst = 1; + @(posedge clk); + rst = 0; + @(posedge clk); + ena = 1; + end + + always + #5 clk <= ~clk; + + initial + begin + //$monitor($time, " clk=%b rst=%b", clk, uut.reset); + + $dumpfile("radar_tb.vcd"); + $dumpvars(0, radar_tb); + end + + // Test tasks + task write_cfg_register; + input [6:0] regno; + input [31:0] value; + + begin + @(posedge clk); + saddr <= regno; + sdata <= value; + s_strobe <= 1'b1; + @(posedge clk); + s_strobe <= 0; + end + endtask // write_cfg_register + + // Application reset line + task set_reset; + input reset; + + begin + mode = reset ? (mode | `bmFR_RADAR_MODE_RESET) : (mode & ~`bmFR_RADAR_MODE_RESET); + write_cfg_register(`FR_RADAR_MODE, mode); + end + endtask // reset + + // Enable/disable transmitter + task enable_tx; + input enabled; + + begin + mode = enabled ? (mode | `bmFR_RADAR_MODE_TX) : (mode & ~`bmFR_RADAR_MODE_TX); + write_cfg_register(`FR_RADAR_MODE, mode); + end + endtask // enable_tx + + // Enable/disable receiver + task enable_rx; + input enabled; + + begin + mode = enabled ? (mode | `bmFR_RADAR_MODE_RX) : (mode & ~`bmFR_RADAR_MODE_RX); + write_cfg_register(`FR_RADAR_MODE, mode); + end + endtask // enable_rx + + // Waveform amplitude + task set_amplitude; + input [13:0] amp; + + begin + write_cfg_register(`FR_RADAR_AMPL, amp); + end + endtask // set_amplitude + + // Waveform frequency + task set_frequency; + input [31:0] freq; + + begin + write_cfg_register(`FR_RADAR_FREQ1N, freq); + end + endtask // frequency + + // Test transmitter functionality + task test_tx; + begin + #20 set_reset(1); + #20 set_amplitude(16'd9946); + #20 set_frequency(32'h08000000); + #20 enable_tx(1); + #20 enable_rx(0); + #20 set_reset(0); + #10000; + end + endtask // test_tx + + // Execute tests + initial + begin + #20 test_tx; + #100 $finish; + end +endmodule diff --git a/gr-radar-mono/src/fpga/tb/radar_tb_wave.sh b/gr-radar-mono/src/fpga/tb/radar_tb_wave.sh new file mode 100755 index 000000000..45bba9f5e --- /dev/null +++ b/gr-radar-mono/src/fpga/tb/radar_tb_wave.sh @@ -0,0 +1,2 @@ +#!/bin/sh +gtkwave radar_tb.vcd radar_tb.sav diff --git a/gr-radar-mono/src/fpga/top/Makefile.am b/gr-radar-mono/src/fpga/top/Makefile.am new file mode 100644 index 000000000..8e6eb7ff1 --- /dev/null +++ b/gr-radar-mono/src/fpga/top/Makefile.am @@ -0,0 +1,63 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +include $(top_srcdir)/Makefile.common + +datadir = $(prefix)/share/usrp + +RBFS = usrp_radar_mono.rbf + +EXTRA_DIST = \ + usrp_radar_mono.csf \ + usrp_radar_mono.esf \ + usrp_radar_mono.psf \ + usrp_radar_mono.qpf \ + usrp_radar_mono.qsf \ + usrp_radar_mono.v \ + $(RBFS) + +install-data-local: + @for file in $(RBFS); do \ + echo "$(INSTALL_DATA) $(srcdir)/$$file $(DESTDIR)$(datadir)/rev2/$$file"; \ + $(INSTALL_DATA) $(srcdir)/$$file $(DESTDIR)$(datadir)/rev2/$$file; \ + echo "$(INSTALL_DATA) $(srcdir)/$$file $(DESTDIR)$(datadir)/rev4/$$file"; \ + $(INSTALL_DATA) $(srcdir)/$$file $(DESTDIR)$(datadir)/rev4/$$file; \ + done + +uninstall-local: + @for file in $(RBFS); do \ + echo "$(RM) $(DESTDIR)$(datadir)/rev2/$$file"; \ + $(RM) $(DESTDIR)$(datadir)/rev2/$$file; \ + echo "$(RM) $(DESTDIR)$(datadir)/rev4/$$file"; \ + $(RM) $(DESTDIR)$(datadir)/rev4/$$file; \ + done + + +MOSTLYCLEANFILES = \ + db/* \ + *.rpt \ + *.summary \ + *.qws \ + *.smsg \ + *.done \ + *.pin \ + *.sof \ + *~ diff --git a/gr-radar-mono/src/fpga/top/config.vh b/gr-radar-mono/src/fpga/top/config.vh new file mode 100644 index 000000000..176979412 --- /dev/null +++ b/gr-radar-mono/src/fpga/top/config.vh @@ -0,0 +1,24 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +// Uncomment to enable 64 MHz Tx clock, otherwise 32 MHz +//`define TX_RATE_MAX + diff --git a/gr-radar-mono/src/fpga/top/dacpll.v b/gr-radar-mono/src/fpga/top/dacpll.v new file mode 100644 index 000000000..f3941bc67 --- /dev/null +++ b/gr-radar-mono/src/fpga/top/dacpll.v @@ -0,0 +1,291 @@ +// megafunction wizard: %ALTPLL%
+// GENERATION: STANDARD
+// VERSION: WM1.0
+// MODULE: altpll
+
+// ============================================================
+// File Name: dacpll.v
+// Megafunction Name(s):
+// altpll
+//
+// Simulation Library Files(s):
+// altera_mf
+// ============================================================
+// ************************************************************
+// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
+//
+// 7.0 Build 33 02/05/2007 SJ Web Edition
+// ************************************************************
+
+
+//Copyright (C) 1991-2007 Altera Corporation
+//Your use of Altera Corporation's design tools, logic functions
+//and other software and tools, and its AMPP partner logic
+//functions, and any output files from any of the foregoing
+//(including device programming or simulation files), and any
+//associated documentation or information are expressly subject
+//to the terms and conditions of the Altera Program License
+//Subscription Agreement, Altera MegaCore Function License
+//Agreement, or other applicable license agreement, including,
+//without limitation, that your use is for the sole purpose of
+//programming logic devices manufactured by Altera and sold by
+//Altera or its authorized distributors. Please refer to the
+//applicable agreement for further details.
+
+
+// synopsys translate_off
+`timescale 1 ps / 1 ps
+// synopsys translate_on
+module dacpll (
+ areset,
+ inclk0,
+ c0);
+
+ input areset;
+ input inclk0;
+ output c0;
+
+ wire [5:0] sub_wire0;
+ wire [0:0] sub_wire4 = 1'h0;
+ wire [0:0] sub_wire1 = sub_wire0[0:0];
+ wire c0 = sub_wire1;
+ wire sub_wire2 = inclk0;
+ wire [1:0] sub_wire3 = {sub_wire4, sub_wire2};
+
+ altpll altpll_component (
+ .inclk (sub_wire3),
+ .areset (areset),
+ .clk (sub_wire0),
+ .activeclock (),
+ .clkbad (),
+ .clkena ({6{1'b1}}),
+ .clkloss (),
+ .clkswitch (1'b0),
+ .configupdate (1'b1),
+ .enable0 (),
+ .enable1 (),
+ .extclk (),
+ .extclkena ({4{1'b1}}),
+ .fbin (1'b1),
+ .fbout (),
+ .locked (),
+ .pfdena (1'b1),
+ .phasecounterselect ({4{1'b1}}),
+ .phasedone (),
+ .phasestep (1'b1),
+ .phaseupdown (1'b1),
+ .pllena (1'b1),
+ .scanaclr (1'b0),
+ .scanclk (1'b0),
+ .scanclkena (1'b1),
+ .scandata (1'b0),
+ .scandataout (),
+ .scandone (),
+ .scanread (1'b0),
+ .scanwrite (1'b0),
+ .sclkout0 (),
+ .sclkout1 (),
+ .vcooverrange (),
+ .vcounderrange ());
+ defparam
+ altpll_component.clk0_divide_by = 1,
+ altpll_component.clk0_duty_cycle = 50,
+ altpll_component.clk0_multiply_by = 2,
+ altpll_component.clk0_phase_shift = "0000",
+ altpll_component.compensate_clock = "CLK0",
+ altpll_component.inclk0_input_frequency = 15625,
+ altpll_component.intended_device_family = "Cyclone",
+ altpll_component.lpm_type = "altpll",
+ altpll_component.operation_mode = "NORMAL",
+ altpll_component.pll_type = "AUTO",
+ altpll_component.port_activeclock = "PORT_UNUSED",
+ altpll_component.port_areset = "PORT_USED",
+ altpll_component.port_clkbad0 = "PORT_UNUSED",
+ altpll_component.port_clkbad1 = "PORT_UNUSED",
+ altpll_component.port_clkloss = "PORT_UNUSED",
+ altpll_component.port_clkswitch = "PORT_UNUSED",
+ altpll_component.port_configupdate = "PORT_UNUSED",
+ altpll_component.port_fbin = "PORT_UNUSED",
+ altpll_component.port_inclk0 = "PORT_USED",
+ altpll_component.port_inclk1 = "PORT_UNUSED",
+ altpll_component.port_locked = "PORT_UNUSED",
+ altpll_component.port_pfdena = "PORT_UNUSED",
+ altpll_component.port_phasecounterselect = "PORT_UNUSED",
+ altpll_component.port_phasedone = "PORT_UNUSED",
+ altpll_component.port_phasestep = "PORT_UNUSED",
+ altpll_component.port_phaseupdown = "PORT_UNUSED",
+ altpll_component.port_pllena = "PORT_UNUSED",
+ altpll_component.port_scanaclr = "PORT_UNUSED",
+ altpll_component.port_scanclk = "PORT_UNUSED",
+ altpll_component.port_scanclkena = "PORT_UNUSED",
+ altpll_component.port_scandata = "PORT_UNUSED",
+ altpll_component.port_scandataout = "PORT_UNUSED",
+ altpll_component.port_scandone = "PORT_UNUSED",
+ altpll_component.port_scanread = "PORT_UNUSED",
+ altpll_component.port_scanwrite = "PORT_UNUSED",
+ altpll_component.port_clk0 = "PORT_USED",
+ altpll_component.port_clk1 = "PORT_UNUSED",
+ altpll_component.port_clk3 = "PORT_UNUSED",
+ altpll_component.port_clk4 = "PORT_UNUSED",
+ altpll_component.port_clk5 = "PORT_UNUSED",
+ altpll_component.port_clkena0 = "PORT_UNUSED",
+ altpll_component.port_clkena1 = "PORT_UNUSED",
+ altpll_component.port_clkena3 = "PORT_UNUSED",
+ altpll_component.port_clkena4 = "PORT_UNUSED",
+ altpll_component.port_clkena5 = "PORT_UNUSED",
+ altpll_component.port_extclk0 = "PORT_UNUSED",
+ altpll_component.port_extclk1 = "PORT_UNUSED",
+ altpll_component.port_extclk2 = "PORT_UNUSED",
+ altpll_component.port_extclk3 = "PORT_UNUSED";
+
+
+endmodule
+
+// ============================================================
+// CNX file retrieval info
+// ============================================================
+// Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
+// Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
+// Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
+// Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
+// Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
+// Retrieval info: PRIVATE: BANDWIDTH_USE_CUSTOM STRING "0"
+// Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
+// Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
+// Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
+// Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
+// Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
+// Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
+// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
+// Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
+// Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "e0"
+// Retrieval info: PRIVATE: DEVICE_FAMILY NUMERIC "11"
+// Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "8"
+// Retrieval info: PRIVATE: DEV_FAMILY STRING "Cyclone"
+// Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
+// Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
+// Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
+// Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
+// Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
+// Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
+// Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
+// Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "64.000"
+// Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
+// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
+// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
+// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
+// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
+// Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
+// Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "0"
+// Retrieval info: PRIVATE: LOCK_LOSS_SWITCHOVER_CHECK STRING "0"
+// Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
+// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "512.000"
+// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
+// Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
+// Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
+// Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "2"
+// Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
+// Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000"
+// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
+// Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
+// Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
+// Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
+// Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "ns"
+// Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
+// Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1"
+// Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
+// Retrieval info: PRIVATE: PLL_ENA_CHECK STRING "0"
+// Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
+// Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
+// Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
+// Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
+// Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
+// Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
+// Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
+// Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
+// Retrieval info: PRIVATE: SPREAD_USE STRING "0"
+// Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
+// Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
+// Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
+// Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: USE_CLK0 STRING "1"
+// Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
+// Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
+// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
+// Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1"
+// Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
+// Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "2"
+// Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
+// Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
+// Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "15625"
+// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone"
+// Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
+// Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
+// Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
+// Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED"
+// Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
+// Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
+// Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
+// Retrieval info: USED_PORT: @clk 0 0 6 0 OUTPUT_CLK_EXT VCC "@clk[5..0]"
+// Retrieval info: USED_PORT: @extclk 0 0 4 0 OUTPUT_CLK_EXT VCC "@extclk[3..0]"
+// Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"
+// Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
+// Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
+// Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
+// Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
+// Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
+// Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.v TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.ppf TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.inc FALSE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.cmp FALSE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.bsf TRUE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_inst.v TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_bb.v TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_waveforms.html TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_wave*.jpg FALSE FALSE
+// Retrieval info: LIB_FILE: altera_mf
diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.csf b/gr-radar-mono/src/fpga/top/usrp_radar_mono.csf new file mode 100644 index 000000000..121b15aaf --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.csf @@ -0,0 +1,444 @@ +COMPILER_SETTINGS +{ + IO_PLACEMENT_OPTIMIZATION = OFF; + ENABLE_DRC_SETTINGS = OFF; + PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF; + PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF; + PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF; + DRC_FANOUT_EXCEEDING = 30; + DRC_REPORT_FANOUT_EXCEEDING = OFF; + DRC_TOP_FANOUT = 50; + DRC_REPORT_TOP_FANOUT = OFF; + RUN_DRC_DURING_COMPILATION = OFF; + ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON; + ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF; + ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF; + ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF; + SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF; + MERGE_HEX_FILE = OFF; + TRUE_WYSIWYG_FLOW = OFF; + SEED = 1; + FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY; + FAMILY = Cyclone; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2"; + DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1"; + DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB"; + DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB"; + DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4"; + DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4"; + DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3"; + DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS"; + DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS"; + DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS"; + STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2"; + PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2"; + STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1"; + FAST_FIT_COMPILATION = OFF; + SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF; + OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = ON; + OPTIMIZE_TIMING = "NORMAL COMPILATION"; + OPTIMIZE_HOLD_TIMING = OFF; + COMPILATION_LEVEL = FULL; + SAVE_DISK_SPACE = OFF; + SPEED_DISK_USAGE_TRADEOFF = NORMAL; + LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF; + SIGNALPROBE_ALLOW_OVERUSE = OFF; + FOCUS_ENTITY_NAME = |usrp_radar_mono; + ROUTING_BACK_ANNOTATION_MODE = OFF; + INC_PLC_MODE = OFF; + FIT_ONLY_ONE_ATTEMPT = OFF; +} +DEFAULT_DEVICE_OPTIONS +{ + GENERATE_CONFIG_HEXOUT_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_JBC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_SVF_FILE = OFF; + RESERVE_PIN = "AS INPUT TRI-STATED"; + RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND"; + HEXOUT_FILE_COUNT_DIRECTION = UP; + HEXOUT_FILE_START_ADDRESS = 0; + GENERATE_HEX_FILE = OFF; + GENERATE_RBF_FILE = OFF; + GENERATE_TTF_FILE = OFF; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + APEX20K_CONFIGURATION_DEVICE = AUTO; + USE_CONFIGURATION_DEVICE = ON; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + AUTO_RESTART_CONFIGURATION = OFF; + ENABLE_VREFB_PIN = OFF; + ENABLE_VREFA_PIN = OFF; + SECURITY_BIT = OFF; + USER_START_UP_CLOCK = OFF; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_UPDATE_MODE = STANDARD; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + ENABLE_JTAG_BST_SUPPORT = OFF; + CONFIGURATION_CLOCK_DIVISOR = 1; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CLOCK_SOURCE = INTERNAL; + COMPRESSION_MODE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; +} +AUTO_SLD_HUB_ENTITY +{ + AUTO_INSERT_SLD_HUB_ENTITY = ENABLE; + HUB_INSTANCE_NAME = SLD_HUB_INST; + HUB_ENTITY_NAME = SLD_HUB; +} +SIGNALTAP_LOGIC_ANALYZER_SETTINGS +{ + ENABLE_SIGNALTAP = Off; + AUTO_ENABLE_SMART_COMPILE = On; +} +CHIP(usrp_radar_mono) +{ + DEVICE = EP1C12Q240C8; + DEVICE_FILTER_PACKAGE = "ANY QFP"; + DEVICE_FILTER_PIN_COUNT = 240; + DEVICE_FILTER_SPEED_GRADE = ANY; + AUTO_RESTART_CONFIGURATION = OFF; + RELEASE_CLEARS_BEFORE_TRI_STATES = OFF; + USER_START_UP_CLOCK = OFF; + ENABLE_DEVICE_WIDE_RESET = OFF; + ENABLE_DEVICE_WIDE_OE = OFF; + ENABLE_INIT_DONE_OUTPUT = OFF; + FLEX10K_ENABLE_LOCK_OUTPUT = OFF; + ENABLE_JTAG_BST_SUPPORT = OFF; + MAX7000_ENABLE_JTAG_BST_SUPPORT = ON; + APEX20K_JTAG_USER_CODE = FFFFFFFF; + MERCURY_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_JTAG_USER_CODE = 7F; + MAX7000_JTAG_USER_CODE = FFFFFFFF; + MAX7000S_JTAG_USER_CODE = FFFF; + STRATIX_JTAG_USER_CODE = FFFFFFFF; + APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + CYCLONE_CONFIGURATION_SCHEME = "PASSIVE SERIAL"; + USE_CONFIGURATION_DEVICE = OFF; + APEX20K_CONFIGURATION_DEVICE = AUTO; + MERCURY_CONFIGURATION_DEVICE = AUTO; + FLEX6K_CONFIGURATION_DEVICE = AUTO; + FLEX10K_CONFIGURATION_DEVICE = AUTO; + EXCALIBUR_CONFIGURATION_DEVICE = AUTO; + STRATIX_CONFIGURATION_DEVICE = AUTO; + CYCLONE_CONFIGURATION_DEVICE = AUTO; + STRATIX_UPDATE_MODE = STANDARD; + APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF; + AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON; + DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF; + COMPRESSION_MODE = OFF; + ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF; + FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON; + EPROM_USE_CHECKSUM_AS_USERCODE = OFF; + USE_CHECKSUM_AS_USERCODE = OFF; + MAX7000_USE_CHECKSUM_AS_USERCODE = OFF; + GENERATE_TTF_FILE = OFF; + GENERATE_RBF_FILE = ON; + GENERATE_HEX_FILE = OFF; + SECURITY_BIT = OFF; + ENABLE_VREFA_PIN = OFF; + ENABLE_VREFB_PIN = OFF; + GENERATE_SVF_FILE = OFF; + GENERATE_ISC_FILE = OFF; + GENERATE_JAM_FILE = OFF; + GENERATE_JBC_FILE = OFF; + GENERATE_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_SVF_FILE = OFF; + GENERATE_CONFIG_ISC_FILE = OFF; + GENERATE_CONFIG_JAM_FILE = OFF; + GENERATE_CONFIG_JBC_FILE = OFF; + GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON; + GENERATE_CONFIG_HEXOUT_FILE = OFF; + ON_CHIP_BITSTREAM_DECOMPRESSION = OFF; + BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE = OFF; + HEXOUT_FILE_START_ADDRESS = 0; + HEXOUT_FILE_COUNT_DIRECTION = UP; + RESERVE_ALL_UNUSED_PINS = "AS INPUT TRI-STATED"; + STRATIX_DEVICE_IO_STANDARD = LVTTL; + CLOCK_SOURCE = INTERNAL; + CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ"; + CONFIGURATION_CLOCK_DIVISOR = 1; + RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED"; + RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO"; + SCLK : LOCATION = Pin_101; + SDI : LOCATION = Pin_100; + SEN : LOCATION = Pin_98; + SLD : LOCATION = Pin_95; + adc1_data[0] : LOCATION = Pin_5; + adc1_data[10] : LOCATION = Pin_235; + adc1_data[11] : LOCATION = Pin_234; + adc1_data[1] : LOCATION = Pin_4; + adc1_data[2] : LOCATION = Pin_3; + adc1_data[3] : LOCATION = Pin_2; + adc1_data[4] : LOCATION = Pin_1; + adc1_data[4] : IO_STANDARD = LVTTL; + adc1_data[5] : LOCATION = Pin_240; + adc1_data[6] : LOCATION = Pin_239; + adc1_data[7] : LOCATION = Pin_238; + adc1_data[8] : LOCATION = Pin_237; + adc1_data[9] : LOCATION = Pin_236; + adc2_data[0] : LOCATION = Pin_20; + adc2_data[10] : LOCATION = Pin_8; + adc2_data[11] : LOCATION = Pin_7; + adc2_data[1] : LOCATION = Pin_19; + adc2_data[2] : LOCATION = Pin_18; + adc2_data[3] : LOCATION = Pin_17; + adc2_data[4] : LOCATION = Pin_16; + adc2_data[5] : LOCATION = Pin_15; + adc2_data[6] : LOCATION = Pin_14; + adc2_data[7] : LOCATION = Pin_13; + adc2_data[8] : LOCATION = Pin_12; + adc2_data[9] : LOCATION = Pin_11; + adc3_data[0] : LOCATION = Pin_200; + adc3_data[10] : LOCATION = Pin_184; + adc3_data[11] : LOCATION = Pin_183; + adc3_data[1] : LOCATION = Pin_197; + adc3_data[2] : LOCATION = Pin_196; + adc3_data[3] : LOCATION = Pin_195; + adc3_data[4] : LOCATION = Pin_194; + adc3_data[5] : LOCATION = Pin_193; + adc3_data[6] : LOCATION = Pin_188; + adc3_data[7] : LOCATION = Pin_187; + adc3_data[8] : LOCATION = Pin_186; + adc3_data[9] : LOCATION = Pin_185; + adc4_data[0] : LOCATION = Pin_222; + adc4_data[10] : LOCATION = Pin_203; + adc4_data[11] : LOCATION = Pin_202; + adc4_data[1] : LOCATION = Pin_219; + adc4_data[2] : LOCATION = Pin_217; + adc4_data[3] : LOCATION = Pin_216; + adc4_data[4] : LOCATION = Pin_215; + adc4_data[5] : LOCATION = Pin_214; + adc4_data[6] : LOCATION = Pin_213; + adc4_data[7] : LOCATION = Pin_208; + adc4_data[8] : LOCATION = Pin_207; + adc4_data[9] : LOCATION = Pin_206; + adc_oeb[0] : LOCATION = Pin_228; + adc_oeb[1] : LOCATION = Pin_21; + adc_oeb[2] : LOCATION = Pin_181; + adc_oeb[3] : LOCATION = Pin_218; + adc_otr[0] : LOCATION = Pin_233; + adc_otr[1] : LOCATION = Pin_6; + adc_otr[2] : LOCATION = Pin_182; + adc_otr[3] : LOCATION = Pin_201; + adclk0 : LOCATION = Pin_224; + adclk1 : LOCATION = Pin_226; + clk0 : LOCATION = Pin_28; + clk0 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk0 : IO_STANDARD = LVTTL; + clk1 : LOCATION = Pin_29; + clk1 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk1 : IO_STANDARD = LVTTL; + clk3 : LOCATION = Pin_152; + clk3 : RESERVE_PIN = "AS INPUT TRI-STATED"; + clk3 : IO_STANDARD = LVTTL; + clk_120mhz : LOCATION = Pin_153; + clk_120mhz : IO_STANDARD = LVTTL; + clk_out : LOCATION = Pin_63; + clk_out : IO_STANDARD = LVTTL; + dac1_data[0] : LOCATION = Pin_165; + dac1_data[10] : LOCATION = Pin_177; + dac1_data[11] : LOCATION = Pin_178; + dac1_data[12] : LOCATION = Pin_179; + dac1_data[13] : LOCATION = Pin_180; + dac1_data[1] : LOCATION = Pin_166; + dac1_data[2] : LOCATION = Pin_167; + dac1_data[3] : LOCATION = Pin_168; + dac1_data[4] : LOCATION = Pin_169; + dac1_data[5] : LOCATION = Pin_170; + dac1_data[6] : LOCATION = Pin_173; + dac1_data[7] : LOCATION = Pin_174; + dac1_data[8] : LOCATION = Pin_175; + dac1_data[9] : LOCATION = Pin_176; + dac2_data[0] : LOCATION = Pin_159; + dac2_data[10] : LOCATION = Pin_163; + dac2_data[11] : LOCATION = Pin_139; + dac2_data[12] : LOCATION = Pin_164; + dac2_data[13] : LOCATION = Pin_138; + dac2_data[1] : LOCATION = Pin_158; + dac2_data[2] : LOCATION = Pin_160; + dac2_data[3] : LOCATION = Pin_156; + dac2_data[4] : LOCATION = Pin_161; + dac2_data[5] : LOCATION = Pin_144; + dac2_data[6] : LOCATION = Pin_162; + dac2_data[7] : LOCATION = Pin_141; + dac2_data[8] : LOCATION = Pin_143; + dac2_data[9] : LOCATION = Pin_140; + dac3_data[0] : LOCATION = Pin_122; + dac3_data[10] : LOCATION = Pin_134; + dac3_data[11] : LOCATION = Pin_135; + dac3_data[12] : LOCATION = Pin_136; + dac3_data[13] : LOCATION = Pin_137; + dac3_data[1] : LOCATION = Pin_123; + dac3_data[2] : LOCATION = Pin_124; + dac3_data[3] : LOCATION = Pin_125; + dac3_data[4] : LOCATION = Pin_126; + dac3_data[5] : LOCATION = Pin_127; + dac3_data[6] : LOCATION = Pin_128; + dac3_data[7] : LOCATION = Pin_131; + dac3_data[8] : LOCATION = Pin_132; + dac3_data[9] : LOCATION = Pin_133; + dac4_data[0] : LOCATION = Pin_104; + dac4_data[10] : LOCATION = Pin_118; + dac4_data[11] : LOCATION = Pin_119; + dac4_data[12] : LOCATION = Pin_120; + dac4_data[13] : LOCATION = Pin_121; + dac4_data[1] : LOCATION = Pin_105; + dac4_data[2] : LOCATION = Pin_106; + dac4_data[3] : LOCATION = Pin_107; + dac4_data[4] : LOCATION = Pin_108; + dac4_data[5] : LOCATION = Pin_113; + dac4_data[6] : LOCATION = Pin_114; + dac4_data[7] : LOCATION = Pin_115; + dac4_data[8] : LOCATION = Pin_116; + dac4_data[9] : LOCATION = Pin_117; + enable_rx : LOCATION = Pin_88; + enable_tx : LOCATION = Pin_93; + gndbus[0] : LOCATION = Pin_223; + gndbus[0] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[0] : IO_STANDARD = LVTTL; + gndbus[1] : LOCATION = Pin_225; + gndbus[1] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[1] : IO_STANDARD = LVTTL; + gndbus[2] : LOCATION = Pin_227; + gndbus[2] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[2] : IO_STANDARD = LVTTL; + gndbus[3] : LOCATION = Pin_62; + gndbus[3] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[3] : IO_STANDARD = LVTTL; + gndbus[4] : LOCATION = Pin_64; + gndbus[4] : RESERVE_PIN = "AS INPUT TRI-STATED"; + gndbus[4] : IO_STANDARD = LVTTL; + misc_pins[0] : LOCATION = Pin_87; + misc_pins[0] : IO_STANDARD = LVTTL; + misc_pins[10] : LOCATION = Pin_76; + misc_pins[10] : IO_STANDARD = LVTTL; + misc_pins[11] : LOCATION = Pin_74; + misc_pins[11] : IO_STANDARD = LVTTL; + misc_pins[1] : LOCATION = Pin_86; + misc_pins[1] : IO_STANDARD = LVTTL; + misc_pins[2] : LOCATION = Pin_85; + misc_pins[2] : IO_STANDARD = LVTTL; + misc_pins[3] : LOCATION = Pin_84; + misc_pins[3] : IO_STANDARD = LVTTL; + misc_pins[4] : LOCATION = Pin_83; + misc_pins[4] : IO_STANDARD = LVTTL; + misc_pins[5] : LOCATION = Pin_82; + misc_pins[5] : IO_STANDARD = LVTTL; + misc_pins[6] : LOCATION = Pin_79; + misc_pins[6] : IO_STANDARD = LVTTL; + misc_pins[7] : LOCATION = Pin_78; + misc_pins[7] : IO_STANDARD = LVTTL; + misc_pins[8] : LOCATION = Pin_77; + misc_pins[8] : IO_STANDARD = LVTTL; + misc_pins[9] : LOCATION = Pin_75; + misc_pins[9] : IO_STANDARD = LVTTL; + reset : LOCATION = Pin_94; + usbclk : LOCATION = Pin_55; + usbctl[0] : LOCATION = Pin_56; + usbctl[1] : LOCATION = Pin_54; + usbctl[2] : LOCATION = Pin_53; + usbctl[3] : LOCATION = Pin_58; + usbctl[4] : LOCATION = Pin_57; + usbctl[5] : LOCATION = Pin_44; + usbdata[0] : LOCATION = Pin_73; + usbdata[10] : LOCATION = Pin_41; + usbdata[11] : LOCATION = Pin_39; + usbdata[12] : LOCATION = Pin_38; + usbdata[12] : IO_STANDARD = LVTTL; + usbdata[13] : LOCATION = Pin_37; + usbdata[14] : LOCATION = Pin_24; + usbdata[15] : LOCATION = Pin_23; + usbdata[1] : LOCATION = Pin_68; + usbdata[2] : LOCATION = Pin_67; + usbdata[3] : LOCATION = Pin_66; + usbdata[4] : LOCATION = Pin_65; + usbdata[5] : LOCATION = Pin_61; + usbdata[6] : LOCATION = Pin_60; + usbdata[7] : LOCATION = Pin_59; + usbdata[8] : LOCATION = Pin_43; + usbdata[9] : LOCATION = Pin_42; + usbrdy[0] : LOCATION = Pin_45; + usbrdy[1] : LOCATION = Pin_46; + usbrdy[2] : LOCATION = Pin_47; + usbrdy[3] : LOCATION = Pin_48; + usbrdy[4] : LOCATION = Pin_49; + usbrdy[5] : LOCATION = Pin_50; + clear_status : LOCATION = Pin_99; +} diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.esf b/gr-radar-mono/src/fpga/top/usrp_radar_mono.esf new file mode 100644 index 000000000..6a8aaae42 --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.esf @@ -0,0 +1,14 @@ +SIMULATOR_SETTINGS +{ + ESTIMATE_POWER_CONSUMPTION = OFF; + GLITCH_INTERVAL = 1NS; + GLITCH_DETECTION = OFF; + SIMULATION_COVERAGE = ON; + CHECK_OUTPUTS = OFF; + SETUP_HOLD_DETECTION = OFF; + POWER_ESTIMATION_START_TIME = "0 NS"; + ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON; + SIMULATION_MODE = TIMING; + START_TIME = 0NS; + USE_COMPILER_SETTINGS = usrp_radar_mono; +} diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.psf b/gr-radar-mono/src/fpga/top/usrp_radar_mono.psf new file mode 100644 index 000000000..064967399 --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.psf @@ -0,0 +1,312 @@ +DEFAULT_DESIGN_ASSISTANT_SETTINGS +{ + HCPY_ALOAD_SIGNALS = OFF; + HCPY_VREF_PINS = OFF; + HCPY_CAT = OFF; + HCPY_ILLEGAL_HC_DEV_PKG = OFF; + ACLK_RULE_IMSZER_ADOMAIN = OFF; + ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF; + ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF; + ACLK_CAT = OFF; + SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF; + SIGNALRACE_CAT = OFF; + NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF; + NONSYNCHSTRUCT_RULE_SRLATCH = OFF; + NONSYNCHSTRUCT_RULE_DLATCH = OFF; + NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF; + NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF; + NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF; + NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF; + NONSYNCHSTRUCT_RULE_REG_LOOP = OFF; + NONSYNCHSTRUCT_RULE_COMBLOOP = OFF; + NONSYNCHSTRUCT_CAT = OFF; + NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF; + TIMING_RULE_COIN_CLKEDGE = OFF; + TIMING_RULE_SHIFT_REG = OFF; + TIMING_RULE_HIGH_FANOUTS = OFF; + TIMING_CAT = OFF; + RESET_RULE_ALL = OFF; + RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF; + RESET_RULE_REG_ASNYCH = OFF; + RESET_RULE_COMB_ASYNCH_RESET = OFF; + RESET_RULE_IMSYNCH_EXRESET = OFF; + RESET_RULE_UNSYNCH_EXRESET = OFF; + RESET_RULE_INPINS_RESETNET = OFF; + RESET_CAT = OFF; + CLK_RULE_ALL = OFF; + CLK_RULE_MIX_EDGES = OFF; + CLK_RULE_CLKNET_CLKSPINES = OFF; + CLK_RULE_INPINS_CLKNET = OFF; + CLK_RULE_GATING_SCHEME = OFF; + CLK_RULE_INV_CLOCK = OFF; + CLK_RULE_COMB_CLOCK = OFF; + CLK_CAT = OFF; + HCPY_EXCEED_USER_IO_USAGE = OFF; + HCPY_EXCEED_RAM_USAGE = OFF; + NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF; + SIGNALRACE_RULE_TRISTATE = OFF; + ASSG_RULE_MISSING_TIMING = OFF; + ASSG_RULE_MISSING_FMAX = OFF; + ASSG_CAT = OFF; +} +SYNTHESIS_FITTING_SETTINGS +{ + AUTO_SHIFT_REGISTER_RECOGNITION = ON; + AUTO_DSP_RECOGNITION = ON; + AUTO_RAM_RECOGNITION = ON; + REMOVE_DUPLICATE_LOGIC = ON; + AUTO_TURBO_BIT = ON; + AUTO_MERGE_PLLS = ON; + AUTO_OPEN_DRAIN_PINS = ON; + AUTO_PARALLEL_EXPANDERS = ON; + AUTO_FAST_OUTPUT_ENABLE_REGISTERS = OFF; + AUTO_FAST_OUTPUT_REGISTERS = OFF; + AUTO_FAST_INPUT_REGISTERS = OFF; + AUTO_CASCADE_CHAINS = ON; + AUTO_CARRY_CHAINS = ON; + AUTO_DELAY_CHAINS = ON; + MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH = 4; + PARALLEL_EXPANDER_CHAIN_LENGTH = 16; + CASCADE_CHAIN_LENGTH = 2; + STRATIX_CARRY_CHAIN_LENGTH = 70; + MERCURY_CARRY_CHAIN_LENGTH = 48; + FLEX10K_CARRY_CHAIN_LENGTH = 32; + FLEX6K_CARRY_CHAIN_LENGTH = 32; + CARRY_CHAIN_LENGTH = 48; + CARRY_OUT_PINS_LCELL_INSERT = ON; + NORMAL_LCELL_INSERT = ON; + AUTO_LCELL_INSERTION = ON; + ALLOW_XOR_GATE_USAGE = ON; + AUTO_PACKED_REGISTERS_STRATIX = NORMAL; + AUTO_PACKED_REGISTERS = OFF; + AUTO_PACKED_REG_CYCLONE = NORMAL; + FLEX10K_OPTIMIZATION_TECHNIQUE = AREA; + FLEX6K_OPTIMIZATION_TECHNIQUE = AREA; + MERCURY_OPTIMIZATION_TECHNIQUE = AREA; + APEX20K_OPTIMIZATION_TECHNIQUE = SPEED; + MAX7000_OPTIMIZATION_TECHNIQUE = SPEED; + STRATIX_OPTIMIZATION_TECHNIQUE = SPEED; + CYCLONE_OPTIMIZATION_TECHNIQUE = AREA; + FLEX10K_TECHNOLOGY_MAPPER = LUT; + FLEX6K_TECHNOLOGY_MAPPER = LUT; + MERCURY_TECHNOLOGY_MAPPER = LUT; + APEX20K_TECHNOLOGY_MAPPER = LUT; + MAX7000_TECHNOLOGY_MAPPER = "PRODUCT TERM"; + STRATIX_TECHNOLOGY_MAPPER = LUT; + AUTO_IMPLEMENT_IN_ROM = OFF; + AUTO_GLOBAL_MEMORY_CONTROLS = OFF; + AUTO_GLOBAL_REGISTER_CONTROLS = ON; + AUTO_GLOBAL_OE = ON; + AUTO_GLOBAL_CLOCK = ON; + USE_LPM_FOR_AHDL_OPERATORS = ON; + LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF; + ENABLE_BUS_HOLD_CIRCUITRY = OFF; + WEAK_PULL_UP_RESISTOR = OFF; + TURBO_BIT = ON; + MAX7000_IGNORE_SOFT_BUFFERS = OFF; + IGNORE_SOFT_BUFFERS = ON; + MAX7000_IGNORE_LCELL_BUFFERS = AUTO; + IGNORE_LCELL_BUFFERS = OFF; + IGNORE_ROW_GLOBAL_BUFFERS = OFF; + IGNORE_GLOBAL_BUFFERS = OFF; + IGNORE_CASCADE_BUFFERS = OFF; + IGNORE_CARRY_BUFFERS = OFF; + REMOVE_DUPLICATE_REGISTERS = ON; + REMOVE_REDUNDANT_LOGIC_CELLS = OFF; + ALLOW_POWER_UP_DONT_CARE = ON; + PCI_IO = OFF; + NOT_GATE_PUSH_BACK = ON; + SLOW_SLEW_RATE = OFF; + DSP_BLOCK_BALANCING = AUTO; + STATE_MACHINE_PROCESSING = AUTO; +} +DEFAULT_HARDCOPY_SETTINGS +{ + HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS"; +} +DEFAULT_TIMING_REQUIREMENTS +{ + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + RUN_ALL_TIMING_ANALYSES = ON; + IGNORE_CLOCK_SETTINGS = OFF; + DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE"; + CUT_OFF_IO_PIN_FEEDBACK = ON; + CUT_OFF_CLEAR_AND_PRESET_PATHS = ON; + CUT_OFF_READ_DURING_WRITE_PATHS = ON; + CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON; + DO_MIN_ANALYSIS = ON; + DO_MIN_TIMING = OFF; + NUMBER_OF_PATHS_TO_REPORT = 200; + NUMBER_OF_DESTINATION_TO_REPORT = 10; + NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10; + MAX_SCC_SIZE = 50; +} +HDL_SETTINGS +{ + VERILOG_INPUT_VERSION = VERILOG_2001; + ENABLE_IP_DEBUG = OFF; + VHDL_INPUT_VERSION = VHDL93; + VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF; +} +PROJECT_INFO(usrp_radar_mono) +{ + ORIGINAL_QUARTUS_VERSION = 3.0; + PROJECT_CREATION_TIME_DATE = "00:14:04 JULY 13, 2003"; + LAST_QUARTUS_VERSION = 3.0; + SHOW_REGISTRATION_MESSAGE = ON; + USER_LIBRARIES = "h:\\gnuradio\\trunk\\usrp\\fpga\\megacells"; +} +THIRD_PARTY_EDA_TOOLS(usrp_radar_mono) +{ + EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>"; + EDA_SIMULATION_TOOL = "<NONE>"; + EDA_TIMING_ANALYSIS_TOOL = "<NONE>"; + EDA_BOARD_DESIGN_TOOL = "<NONE>"; + EDA_FORMAL_VERIFICATION_TOOL = "<NONE>"; + EDA_RESYNTHESIS_TOOL = "<NONE>"; +} +EDA_TOOL_SETTINGS(eda_design_synthesis) +{ + EDA_INPUT_GND_NAME = GND; + EDA_INPUT_VCC_NAME = VCC; + EDA_SHOW_LMF_MAPPING_MESSAGES = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_INPUT_DATA_FORMAT = EDIF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_simulation) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_timing_analysis) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + EDA_LAUNCH_CMD_LINE_TOOL = OFF; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_board_design) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_formal_verification) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + RESYNTHESIS_RETIMING = FULL; +} +EDA_TOOL_SETTINGS(eda_palace) +{ + EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF; + EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF; + EDA_MAINTAIN_DESIGN_HIERARCHY = OFF; + EDA_WRITE_DEVICE_CONTROL_PORTS = OFF; + EDA_GENERATE_FUNCTIONAL_NETLIST = OFF; + EDA_FLATTEN_BUSES = OFF; + EDA_MAP_ILLEGAL_CHARACTERS = OFF; + EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF; + EDA_RUN_TOOL_AUTOMATICALLY = OFF; + EDA_OUTPUT_DATA_FORMAT = NONE; + RESYNTHESIS_RETIMING = FULL; + RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL; + RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL; + USE_GENERATED_PHYSICAL_CONSTRAINTS = ON; +} +CLOCK(clk_120mhz) +{ + FMAX_REQUIREMENT = "120.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(usbclk) +{ + FMAX_REQUIREMENT = "48.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(SCLK) +{ + FMAX_REQUIREMENT = "1.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(adclk0) +{ + FMAX_REQUIREMENT = "60.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} +CLOCK(adclk1) +{ + FMAX_REQUIREMENT = "60.0 MHz"; + INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF; + DUTY_CYCLE = 50; + DIVIDE_BASE_CLOCK_PERIOD_BY = 1; + MULTIPLY_BASE_CLOCK_PERIOD_BY = 1; + INVERT_BASE_CLOCK = OFF; +} diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.qpf b/gr-radar-mono/src/fpga/top/usrp_radar_mono.qpf new file mode 100644 index 000000000..d85239e99 --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.qpf @@ -0,0 +1,29 @@ +# Copyright (C) 1991-2004 Altera Corporation +# Any megafunction design, and related netlist (encrypted or decrypted), +# support information, device programming or simulation file, and any other +# associated documentation or information provided by Altera or a partner +# under Altera's Megafunction Partnership Program may be used only +# to program PLD devices (but not masked PLD devices) from Altera. Any +# other use of such megafunction design, netlist, support information, +# device programming or simulation file, or any other related documentation +# or information is prohibited for any other purpose, including, but not +# limited to modification, reverse engineering, de-compiling, or use with +# any other silicon devices, unless such use is explicitly licensed under +# a separate agreement with Altera or a megafunction partner. Title to the +# intellectual property, including patents, copyrights, trademarks, trade +# secrets, or maskworks, embodied in any such megafunction design, netlist, +# support information, device programming or simulation file, or any other +# related documentation or information provided by Altera or a megafunction +# partner, remains with Altera, the megafunction partner, or their respective +# licensors. No other licenses, including any licenses needed under any third +# party's intellectual property, are provided herein. + + + +QUARTUS_VERSION = "4.0" +DATE = "17:10:11 December 20, 2004" + + +# Active Revisions + +PROJECT_REVISION = "usrp_radar_mono" diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.qsf b/gr-radar-mono/src/fpga/top/usrp_radar_mono.qsf new file mode 100644 index 000000000..6d387075f --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.qsf @@ -0,0 +1,400 @@ +# Copyright (C) 1991-2007 Altera Corporation +# Your use of Altera Corporation's design tools, logic functions +# and other software and tools, and its AMPP partner logic +# functions, and any output files from any of the foregoing +# (including device programming or simulation files), and any +# associated documentation or information are expressly subject +# to the terms and conditions of the Altera Program License +# Subscription Agreement, Altera MegaCore Function License +# Agreement, or other applicable license agreement, including, +# without limitation, that your use is for the sole purpose of +# programming logic devices manufactured by Altera and sold by +# Altera or its authorized distributors. Please refer to the +# applicable agreement for further details. + + +# The default values for assignments are stored in the file +# usrp_radar_mono_assignment_defaults.qdf +# If this file doesn't exist, and for assignments not listed, see file +# assignment_defaults.qdf + +# Altera recommends that you do not modify this file. This +# file is updated automatically by the Quartus II software +# and any changes you make may be lost or overwritten. + + + +# Project-Wide Assignments +# ======================== +set_global_assignment -name ORIGINAL_QUARTUS_VERSION 3.0 +set_global_assignment -name PROJECT_CREATION_TIME_DATE "00:14:04 JULY 13, 2003" +set_global_assignment -name LAST_QUARTUS_VERSION 7.0 +set_global_assignment -name VERILOG_FILE usrp_radar_mono.v +set_global_assignment -name VERILOG_FILE dacpll.v +set_global_assignment -name VERILOG_FILE ../lib/cordic_nco.v +set_global_assignment -name VERILOG_FILE ../lib/dac_interface.v +set_global_assignment -name VERILOG_FILE ../lib/radar_control.v +set_global_assignment -name VERILOG_FILE ../lib/radar_rx.v +set_global_assignment -name VERILOG_FILE ../lib/radar_tx.v +set_global_assignment -name VERILOG_FILE ../lib/radar.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/adc_interface.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/atr_delay.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/bidir_reg.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/clk_divider.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/cordic_stage.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/cordic.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/gen_sync.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/io_pins.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/master_control.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/rssi.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/rx_buffer.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/rx_dcoffset.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/serial_io.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/setting_reg.v +set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/strobe_gen.v + +# Pin & Location Assignments +# ========================== +set_global_assignment -name RESERVE_PIN "AS INPUT TRI-STATED" +set_location_assignment PIN_29 -to SCLK +set_location_assignment PIN_117 -to SDI +set_location_assignment PIN_28 -to usbclk +set_location_assignment PIN_107 -to usbctl[0] +set_location_assignment PIN_106 -to usbctl[1] +set_location_assignment PIN_105 -to usbctl[2] +set_location_assignment PIN_100 -to usbdata[0] +set_location_assignment PIN_84 -to usbdata[10] +set_location_assignment PIN_83 -to usbdata[11] +set_location_assignment PIN_82 -to usbdata[12] +set_location_assignment PIN_79 -to usbdata[13] +set_location_assignment PIN_78 -to usbdata[14] +set_location_assignment PIN_77 -to usbdata[15] +set_location_assignment PIN_99 -to usbdata[1] +set_location_assignment PIN_98 -to usbdata[2] +set_location_assignment PIN_95 -to usbdata[3] +set_location_assignment PIN_94 -to usbdata[4] +set_location_assignment PIN_93 -to usbdata[5] +set_location_assignment PIN_88 -to usbdata[6] +set_location_assignment PIN_87 -to usbdata[7] +set_location_assignment PIN_86 -to usbdata[8] +set_location_assignment PIN_85 -to usbdata[9] +set_location_assignment PIN_104 -to usbrdy[0] +set_location_assignment PIN_101 -to usbrdy[1] +set_location_assignment PIN_76 -to FX2_1 +set_location_assignment PIN_75 -to FX2_2 +set_location_assignment PIN_74 -to FX2_3 +set_location_assignment PIN_116 -to io_rx_a[0] +set_location_assignment PIN_115 -to io_rx_a[1] +set_location_assignment PIN_114 -to io_rx_a[2] +set_location_assignment PIN_113 -to io_rx_a[3] +set_location_assignment PIN_108 -to io_rx_a[4] +set_location_assignment PIN_195 -to io_rx_a[5] +set_location_assignment PIN_196 -to io_rx_a[6] +set_location_assignment PIN_197 -to io_rx_a[7] +set_location_assignment PIN_200 -to io_rx_a[8] +set_location_assignment PIN_201 -to io_rx_a[9] +set_location_assignment PIN_202 -to io_rx_a[10] +set_location_assignment PIN_203 -to io_rx_a[11] +set_location_assignment PIN_206 -to io_rx_a[12] +set_location_assignment PIN_207 -to io_rx_a[13] +set_location_assignment PIN_208 -to io_rx_a[14] +set_location_assignment PIN_214 -to io_rx_b[0] +set_location_assignment PIN_215 -to io_rx_b[1] +set_location_assignment PIN_216 -to io_rx_b[2] +set_location_assignment PIN_217 -to io_rx_b[3] +set_location_assignment PIN_218 -to io_rx_b[4] +set_location_assignment PIN_219 -to io_rx_b[5] +set_location_assignment PIN_222 -to io_rx_b[6] +set_location_assignment PIN_223 -to io_rx_b[7] +set_location_assignment PIN_224 -to io_rx_b[8] +set_location_assignment PIN_225 -to io_rx_b[9] +set_location_assignment PIN_226 -to io_rx_b[10] +set_location_assignment PIN_227 -to io_rx_b[11] +set_location_assignment PIN_228 -to io_rx_b[12] +set_location_assignment PIN_233 -to io_rx_b[13] +set_location_assignment PIN_234 -to io_rx_b[14] +set_location_assignment PIN_175 -to io_tx_a[0] +set_location_assignment PIN_176 -to io_tx_a[1] +set_location_assignment PIN_177 -to io_tx_a[2] +set_location_assignment PIN_178 -to io_tx_a[3] +set_location_assignment PIN_179 -to io_tx_a[4] +set_location_assignment PIN_180 -to io_tx_a[5] +set_location_assignment PIN_181 -to io_tx_a[6] +set_location_assignment PIN_182 -to io_tx_a[7] +set_location_assignment PIN_183 -to io_tx_a[8] +set_location_assignment PIN_184 -to io_tx_a[9] +set_location_assignment PIN_185 -to io_tx_a[10] +set_location_assignment PIN_186 -to io_tx_a[11] +set_location_assignment PIN_187 -to io_tx_a[12] +set_location_assignment PIN_188 -to io_tx_a[13] +set_location_assignment PIN_193 -to io_tx_a[14] +set_location_assignment PIN_73 -to io_tx_b[0] +set_location_assignment PIN_68 -to io_tx_b[1] +set_location_assignment PIN_67 -to io_tx_b[2] +set_location_assignment PIN_66 -to io_tx_b[3] +set_location_assignment PIN_65 -to io_tx_b[4] +set_location_assignment PIN_64 -to io_tx_b[5] +set_location_assignment PIN_63 -to io_tx_b[6] +set_location_assignment PIN_62 -to io_tx_b[7] +set_location_assignment PIN_61 -to io_tx_b[8] +set_location_assignment PIN_60 -to io_tx_b[9] +set_location_assignment PIN_59 -to io_tx_b[10] +set_location_assignment PIN_58 -to io_tx_b[11] +set_location_assignment PIN_57 -to io_tx_b[12] +set_location_assignment PIN_56 -to io_tx_b[13] +set_location_assignment PIN_55 -to io_tx_b[14] +set_location_assignment PIN_152 -to master_clk +set_location_assignment PIN_144 -to rx_a_a[0] +set_location_assignment PIN_143 -to rx_a_a[1] +set_location_assignment PIN_141 -to rx_a_a[2] +set_location_assignment PIN_140 -to rx_a_a[3] +set_location_assignment PIN_139 -to rx_a_a[4] +set_location_assignment PIN_138 -to rx_a_a[5] +set_location_assignment PIN_137 -to rx_a_a[6] +set_location_assignment PIN_136 -to rx_a_a[7] +set_location_assignment PIN_135 -to rx_a_a[8] +set_location_assignment PIN_134 -to rx_a_a[9] +set_location_assignment PIN_133 -to rx_a_a[10] +set_location_assignment PIN_132 -to rx_a_a[11] +set_location_assignment PIN_23 -to rx_a_b[0] +set_location_assignment PIN_21 -to rx_a_b[1] +set_location_assignment PIN_20 -to rx_a_b[2] +set_location_assignment PIN_19 -to rx_a_b[3] +set_location_assignment PIN_18 -to rx_a_b[4] +set_location_assignment PIN_17 -to rx_a_b[5] +set_location_assignment PIN_16 -to rx_a_b[6] +set_location_assignment PIN_15 -to rx_a_b[7] +set_location_assignment PIN_14 -to rx_a_b[8] +set_location_assignment PIN_13 -to rx_a_b[9] +set_location_assignment PIN_12 -to rx_a_b[10] +set_location_assignment PIN_11 -to rx_a_b[11] +set_location_assignment PIN_131 -to rx_b_a[0] +set_location_assignment PIN_128 -to rx_b_a[1] +set_location_assignment PIN_127 -to rx_b_a[2] +set_location_assignment PIN_126 -to rx_b_a[3] +set_location_assignment PIN_125 -to rx_b_a[4] +set_location_assignment PIN_124 -to rx_b_a[5] +set_location_assignment PIN_123 -to rx_b_a[6] +set_location_assignment PIN_122 -to rx_b_a[7] +set_location_assignment PIN_121 -to rx_b_a[8] +set_location_assignment PIN_120 -to rx_b_a[9] +set_location_assignment PIN_119 -to rx_b_a[10] +set_location_assignment PIN_118 -to rx_b_a[11] +set_location_assignment PIN_8 -to rx_b_b[0] +set_location_assignment PIN_7 -to rx_b_b[1] +set_location_assignment PIN_6 -to rx_b_b[2] +set_location_assignment PIN_5 -to rx_b_b[3] +set_location_assignment PIN_4 -to rx_b_b[4] +set_location_assignment PIN_3 -to rx_b_b[5] +set_location_assignment PIN_2 -to rx_b_b[6] +set_location_assignment PIN_240 -to rx_b_b[7] +set_location_assignment PIN_239 -to rx_b_b[8] +set_location_assignment PIN_238 -to rx_b_b[9] +set_location_assignment PIN_237 -to rx_b_b[10] +set_location_assignment PIN_236 -to rx_b_b[11] +set_location_assignment PIN_156 -to SDO +set_location_assignment PIN_153 -to SEN_FPGA +set_location_assignment PIN_159 -to tx_a[0] +set_location_assignment PIN_160 -to tx_a[1] +set_location_assignment PIN_161 -to tx_a[2] +set_location_assignment PIN_162 -to tx_a[3] +set_location_assignment PIN_163 -to tx_a[4] +set_location_assignment PIN_164 -to tx_a[5] +set_location_assignment PIN_165 -to tx_a[6] +set_location_assignment PIN_166 -to tx_a[7] +set_location_assignment PIN_167 -to tx_a[8] +set_location_assignment PIN_168 -to tx_a[9] +set_location_assignment PIN_169 -to tx_a[10] +set_location_assignment PIN_170 -to tx_a[11] +set_location_assignment PIN_173 -to tx_a[12] +set_location_assignment PIN_174 -to tx_a[13] +set_location_assignment PIN_38 -to tx_b[0] +set_location_assignment PIN_39 -to tx_b[1] +set_location_assignment PIN_41 -to tx_b[2] +set_location_assignment PIN_42 -to tx_b[3] +set_location_assignment PIN_43 -to tx_b[4] +set_location_assignment PIN_44 -to tx_b[5] +set_location_assignment PIN_45 -to tx_b[6] +set_location_assignment PIN_46 -to tx_b[7] +set_location_assignment PIN_47 -to tx_b[8] +set_location_assignment PIN_48 -to tx_b[9] +set_location_assignment PIN_49 -to tx_b[10] +set_location_assignment PIN_50 -to tx_b[11] +set_location_assignment PIN_53 -to tx_b[12] +set_location_assignment PIN_54 -to tx_b[13] +set_location_assignment PIN_158 -to TXSYNC_A +set_location_assignment PIN_37 -to TXSYNC_B +set_location_assignment PIN_235 -to io_rx_b[15] +set_location_assignment PIN_24 -to io_tx_b[15] +set_location_assignment PIN_213 -to io_rx_a[15] +set_location_assignment PIN_194 -to io_tx_a[15] +set_location_assignment PIN_1 -to MYSTERY_SIGNAL + +# Classic Timing Assignments +# ========================== +set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS OFF +set_global_assignment -name MAX_SCC_SIZE 50 + +# Analysis & Synthesis Assignments +# ================================ +set_global_assignment -name SAVE_DISK_SPACE OFF +set_global_assignment -name DEVICE_FILTER_PACKAGE "ANY QFP" +set_global_assignment -name DEVICE_FILTER_PIN_COUNT 240 +set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>" +set_global_assignment -name FAMILY Cyclone +set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE BALANCED +set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE SPEED +set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE SPEED +set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF +set_global_assignment -name USER_LIBRARIES "h:\\gnuradio\\trunk\\usrp\\fpga\\megacells" +set_global_assignment -name AUTO_ENABLE_SMART_COMPILE ON +set_global_assignment -name TOP_LEVEL_ENTITY usrp_radar_mono + +# Fitter Assignments +# ================== +set_global_assignment -name DEVICE EP1C12Q240C8 +set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "PASSIVE SERIAL" +set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED" +set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF +set_global_assignment -name OPTIMIZE_TIMING "NORMAL COMPILATION" +set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC OFF +set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION OFF +set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING OFF +set_global_assignment -name IO_PLACEMENT_OPTIMIZATION ON +set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT NORMAL +set_global_assignment -name INC_PLC_MODE OFF +set_global_assignment -name ROUTING_BACK_ANNOTATION_MODE OFF +set_instance_assignment -name IO_STANDARD LVTTL -to usbdata[12] +set_global_assignment -name STRATIX_DEVICE_IO_STANDARD LVTTL +set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1 + +# EDA Netlist Writer Assignments +# ============================== +set_global_assignment -name EDA_SIMULATION_TOOL "<None>" +set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL "<NONE>" +set_global_assignment -name EDA_BOARD_DESIGN_TOOL "<NONE>" +set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL "<NONE>" +set_global_assignment -name EDA_RESYNTHESIS_TOOL "<NONE>" + +# Assembler Assignments +# ===================== +set_global_assignment -name USE_CONFIGURATION_DEVICE OFF +set_global_assignment -name GENERATE_RBF_FILE ON +set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED" +set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF + +# Simulator Assignments +# ===================== +set_global_assignment -name START_TIME "0 ns" +set_global_assignment -name VECTOR_COMPARE_TRIGGER_MODE INPUT_EDGE + +# Design Assistant Assignments +# ============================ +set_global_assignment -name DRC_REPORT_TOP_FANOUT OFF +set_global_assignment -name DRC_REPORT_FANOUT_EXCEEDING OFF +set_global_assignment -name ASSG_CAT OFF +set_global_assignment -name ASSG_RULE_MISSING_FMAX OFF +set_global_assignment -name ASSG_RULE_MISSING_TIMING OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_ASYN_RAM OFF +set_global_assignment -name CLK_CAT OFF +set_global_assignment -name CLK_RULE_COMB_CLOCK OFF +set_global_assignment -name CLK_RULE_INV_CLOCK OFF +set_global_assignment -name CLK_RULE_GATING_SCHEME OFF +set_global_assignment -name CLK_RULE_INPINS_CLKNET OFF +set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES OFF +set_global_assignment -name CLK_RULE_MIX_EDGES OFF +set_global_assignment -name RESET_CAT OFF +set_global_assignment -name RESET_RULE_INPINS_RESETNET OFF +set_global_assignment -name RESET_RULE_UNSYNCH_EXRESET OFF +set_global_assignment -name RESET_RULE_IMSYNCH_EXRESET OFF +set_global_assignment -name RESET_RULE_COMB_ASYNCH_RESET OFF +set_global_assignment -name RESET_RULE_UNSYNCH_ASYNCH_DOMAIN OFF +set_global_assignment -name RESET_RULE_IMSYNCH_ASYNCH_DOMAIN OFF +set_global_assignment -name TIMING_CAT OFF +set_global_assignment -name TIMING_RULE_SHIFT_REG OFF +set_global_assignment -name TIMING_RULE_COIN_CLKEDGE OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE OFF +set_global_assignment -name NONSYNCHSTRUCT_CAT OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_COMBLOOP OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_REG_LOOP OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_DELAY_CHAIN OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_RIPPLE_CLK OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_SRLATCH OFF +set_global_assignment -name NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED OFF +set_global_assignment -name SIGNALRACE_CAT OFF +set_global_assignment -name ACLK_CAT OFF +set_global_assignment -name ACLK_RULE_NO_SZER_ACLK_DOMAIN OFF +set_global_assignment -name ACLK_RULE_SZER_BTW_ACLK_DOMAIN OFF +set_global_assignment -name ACLK_RULE_IMSZER_ADOMAIN OFF +set_global_assignment -name HCPY_CAT OFF +set_global_assignment -name HCPY_VREF_PINS OFF +set_global_assignment -name ENABLE_DA_RULE "C101, C102, C103, C104, C105, C106, R101, R102, R103, R104, R105, T101, T102, A101, A102, A103, A104, A105, A106, A107, A108, A109, A110, S101, S102, D101, D102, D103, H102" +set_global_assignment -name DISABLE_DA_RULE H101 + +# SignalTap II Assignments +# ======================== +set_global_assignment -name HUB_ENTITY_NAME SLD_HUB +set_global_assignment -name HUB_INSTANCE_NAME SLD_HUB_INST +set_global_assignment -name ENABLE_SIGNALTAP OFF + +# LogicLock Region Assignments +# ============================ +set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF + +# start CLOCK(SCLK) +# ----------------- + + # Classic Timing Assignments + # ========================== +set_global_assignment -name DUTY_CYCLE 50 -section_id SCLK + set_global_assignment -name FMAX_REQUIREMENT "1 MHz" -section_id SCLK + +# end CLOCK(SCLK) +# --------------- + +# start CLOCK(master_clk) +# ----------------------- + + # Classic Timing Assignments + # ========================== +set_global_assignment -name DUTY_CYCLE 50 -section_id master_clk + set_global_assignment -name FMAX_REQUIREMENT "64 MHz" -section_id master_clk + +# end CLOCK(master_clk) +# --------------------- + +# start CLOCK(usbclk) +# ------------------- + + # Classic Timing Assignments + # ========================== +set_global_assignment -name DUTY_CYCLE 50 -section_id usbclk + set_global_assignment -name FMAX_REQUIREMENT "48 MHz" -section_id usbclk + +# end CLOCK(usbclk) +# ----------------- + +# ---------------------- +# start ENTITY(usrp_radar_mono) + + # Classic Timing Assignments + # ========================== + set_instance_assignment -name CLOCK_SETTINGS SCLK -to SCLK + set_instance_assignment -name CLOCK_SETTINGS usbclk -to usbclk + set_instance_assignment -name CLOCK_SETTINGS master_clk -to master_clk + + # start DESIGN_PARTITION(Top) + # --------------------------- + + # Incremental Compilation Assignments + # =================================== + set_instance_assignment -name PARTITION_HIERARCHY no_file_for_top_partition -to | -section_id Top + set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top + + # end DESIGN_PARTITION(Top) + # ------------------------- + +# end ENTITY(usrp_radar_mono) +# --------------------
\ No newline at end of file diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.rbf b/gr-radar-mono/src/fpga/top/usrp_radar_mono.rbf Binary files differnew file mode 100644 index 000000000..17824ccfb --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.rbf diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.srf b/gr-radar-mono/src/fpga/top/usrp_radar_mono.srf new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.srf diff --git a/gr-radar-mono/src/fpga/top/usrp_radar_mono.v b/gr-radar-mono/src/fpga/top/usrp_radar_mono.v new file mode 100644 index 000000000..fc8c08d0d --- /dev/null +++ b/gr-radar-mono/src/fpga/top/usrp_radar_mono.v @@ -0,0 +1,188 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2003,2004 Matt Ettus +// Copyright (C) 2007 Corgan Enterprises LLC +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +module usrp_radar_mono +(output MYSTERY_SIGNAL, + input master_clk, + input SCLK, + input SDI, + inout SDO, + input SEN_FPGA, + + input FX2_1, + output FX2_2, + output FX2_3, + + input wire [11:0] rx_a_a, + input wire [11:0] rx_b_a, + input wire [11:0] rx_a_b, + input wire [11:0] rx_b_b, + + output wire [13:0] tx_a, + output wire [13:0] tx_b, + + output wire TXSYNC_A, + output wire TXSYNC_B, + + // USB interface + input usbclk, + input wire [2:0] usbctl, + output wire [1:0] usbrdy, + inout [15:0] usbdata, // NB Careful, inout + + // These are the general purpose i/o's that go to the daughterboard slots + inout wire [15:0] io_tx_a, + inout wire [15:0] io_tx_b, + inout wire [15:0] io_rx_a, + inout wire [15:0] io_rx_b + ); + wire [15:0] debugdata,debugctrl; + assign MYSTERY_SIGNAL = 1'b0; + + wire clk64; + + // wire WR = usbctl[0]; + wire RD = usbctl[1]; + wire OE = usbctl[2]; + + wire have_pkt_rdy; + assign usbrdy[0] = 1'b0; // have_space; + assign usbrdy[1] = have_pkt_rdy; + + wire tx_underrun, rx_overrun; + wire clear_status = FX2_1; + assign FX2_2 = rx_overrun; + assign FX2_3 = 1'b0; // tx_underrun; + + wire [15:0] usbdata_out; + + wire [3:0] rx_numchan; + wire enable_tx, enable_rx; + wire tx_dsp_reset, rx_dsp_reset, tx_bus_reset, rx_bus_reset; + + // Tri-state bus macro + bustri bustri( .data(usbdata_out),.enabledt(OE),.tridata(usbdata) ); + + assign clk64 = master_clk; + + // TX + wire tx_sample_strobe; + wire tx_empty; + + wire serial_strobe; + wire [6:0] serial_addr; + wire [31:0] serial_data; + + //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Transmit Side + + wire [13:0] tx_i, tx_q; + wire [13:0] tx_dac; + + dac_interface dac(.clk_i(clk64),.rst_i(tx_dsp_reset),.ena_i(enable_tx), + .strobe_i(tx_sample_strobe),.tx_i_i(tx_i),.tx_q_i(tx_q), + .tx_data_o(tx_dac),.tx_sync_o(TXSYNC_A)); + + assign tx_a = tx_dac; + + // Wedge DAC #2 at zero + assign TXSYNC_B = 1'b0; + assign tx_b = 14'b0; + + ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Receive Side + wire rx_sample_strobe, rx_strobe; + wire [15:0] rx_adc0_i, rx_adc0_q; + wire [15:0] rx_buf_i, rx_buf_q; + + adc_interface adc_interface(.clock(clk64),.reset(rx_dsp_reset),.enable(enable_rx), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .rx_a_a(rx_a_a),.rx_b_a(rx_b_a),.rx_a_b(),.rx_b_b(), + .rssi_0(),.rssi_1(),.rssi_2(),.rssi_3(), + .ddc0_in_i(rx_adc0_i),.ddc0_in_q(rx_adc0_q), + .ddc1_in_i(),.ddc1_in_q(), + .ddc2_in_i(),.ddc2_in_q(), + .ddc3_in_i(),.ddc3_in_q(),.rx_numchan(rx_numchan) ); + + rx_buffer rx_buffer + ( .usbclk(usbclk),.bus_reset(rx_bus_reset),.reset(rx_dsp_reset), + .reset_regs(rx_dsp_reset), + .usbdata(usbdata_out),.RD(RD),.have_pkt_rdy(have_pkt_rdy),.rx_overrun(rx_overrun), + .channels(rx_numchan), + .ch_0(rx_buf_i),.ch_1(rx_buf_q), + .ch_2(),.ch_3(), + .ch_4(),.ch_5(), + .ch_6(),.ch_7(), + .rxclk(clk64),.rxstrobe(rx_strobe), + .clear_status(clear_status), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .debugbus() ); + + + /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Top level application + + radar radar_mono ( .clk_i(clk64),.saddr_i(serial_addr),.sdata_i(serial_data),.s_strobe_i(serial_strobe), + .tx_strobe_i(tx_sample_strobe),.tx_dac_i_o(tx_i),.tx_dac_q_o(tx_q), + .rx_strobe_i(rx_sample_strobe),.rx_adc_i_i(rx_adc0_i),.rx_adc_q_i(rx_adc0_q), + .rx_strobe_o(rx_strobe),.rx_ech_i_o(rx_buf_i),.rx_ech_q_o(rx_buf_q) + ); + + /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // Control Functions + + wire [31:0] capabilities; + assign capabilities[7] = 0; // `TX_CAP_HB; + assign capabilities[6:4] = 2; // `TX_CAP_NCHAN; + assign capabilities[3] = 0; // `RX_CAP_HB; + assign capabilities[2:0] = 2; // `RX_CAP_NCHAN; + + serial_io serial_io + ( .master_clk(clk64),.serial_clock(SCLK),.serial_data_in(SDI), + .enable(SEN_FPGA),.reset(1'b0),.serial_data_out(SDO), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .readback_0({io_rx_a,io_tx_a}),.readback_1({io_rx_b,io_tx_b}),.readback_2(capabilities),.readback_3(32'hf0f0931a), + .readback_4(),.readback_5(),.readback_6(),.readback_7() + ); + + wire [15:0] reg_0,reg_1,reg_2,reg_3; + master_control master_control + ( .master_clk(clk64),.usbclk(usbclk), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe), + .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset), + .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset), + .enable_tx(enable_tx),.enable_rx(enable_rx), + .interp_rate(),.decim_rate(), + .tx_sample_strobe(tx_sample_strobe),.strobe_interp(), + .rx_sample_strobe(rx_sample_strobe),.strobe_decim(), + .tx_empty(tx_empty), + .debug_0(),.debug_1(), + .debug_2(),.debug_3(), + .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) ); + + io_pins io_pins + (.io_0(io_tx_a),.io_1(io_rx_a),.io_2(io_tx_b),.io_3(io_rx_b), + .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3), + .clock(clk64),.rx_reset(rx_dsp_reset),.tx_reset(tx_dsp_reset), + .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe)); + +endmodule // usrp_radar_mono |