diff options
Diffstat (limited to 'gr-gpio/src/python')
| -rw-r--r-- | gr-gpio/src/python/.gitignore | 4 | ||||
| -rw-r--r-- | gr-gpio/src/python/Makefile.am | 37 | ||||
| -rw-r--r-- | gr-gpio/src/python/__init__.py | 34 | ||||
| -rw-r--r-- | gr-gpio/src/python/gpio.py | 1 | ||||
| -rwxr-xr-x | gr-gpio/src/python/gpio_rx_sfile.py | 121 | ||||
| -rwxr-xr-x | gr-gpio/src/python/gpio_usrp_fft.py | 333 | ||||
| -rwxr-xr-x | gr-gpio/src/python/gpio_usrp_siggen.py | 208 |
7 files changed, 0 insertions, 738 deletions
diff --git a/gr-gpio/src/python/.gitignore b/gr-gpio/src/python/.gitignore deleted file mode 100644 index b9e19a979..000000000 --- a/gr-gpio/src/python/.gitignore +++ /dev/null @@ -1,4 +0,0 @@ -/Makefile -/Makefile.in -/*.pyc -/run_tests diff --git a/gr-gpio/src/python/Makefile.am b/gr-gpio/src/python/Makefile.am deleted file mode 100644 index 427047cdf..000000000 --- a/gr-gpio/src/python/Makefile.am +++ /dev/null @@ -1,37 +0,0 @@ -# -# Copyright 2007,2008,2009 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -include $(top_srcdir)/Makefile.common - -# Installation locations -ourpythondir = $(grpythondir)/gpio -ourlibdir = $(grpyexecdir)/gpio - -# List of Python files that will get installed into site-packages -ourpython_PYTHON = \ - __init__.py \ - gpio.py - -# List of python files that will be installed onto $prefix/bin -dist_bin_SCRIPTS = \ - gpio_rx_sfile.py \ - gpio_usrp_siggen.py \ - gpio_usrp_fft.py diff --git a/gr-gpio/src/python/__init__.py b/gr-gpio/src/python/__init__.py deleted file mode 100644 index b1f69b7ea..000000000 --- a/gr-gpio/src/python/__init__.py +++ /dev/null @@ -1,34 +0,0 @@ -# -# Copyright 2007,2008 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -import glob -import os.path - -# This automatically imports all top-level objects from .py files -# in our directory into the package name space -for _p in __path__: - _filenames = glob.glob (os.path.join (_p, "*.py")) - for _f in _filenames: - _f = os.path.basename(_f).lower() - _f = _f[:-3] - if _f == '__init__': - continue - exec "from %s import *" % (_f,) diff --git a/gr-gpio/src/python/gpio.py b/gr-gpio/src/python/gpio.py deleted file mode 100644 index a315e166b..000000000 --- a/gr-gpio/src/python/gpio.py +++ /dev/null @@ -1 +0,0 @@ -fpga_filename = 'std_2rxint_2tx_dig.rbf' diff --git a/gr-gpio/src/python/gpio_rx_sfile.py b/gr-gpio/src/python/gpio_rx_sfile.py deleted file mode 100755 index 31f598ef7..000000000 --- a/gr-gpio/src/python/gpio_rx_sfile.py +++ /dev/null @@ -1,121 +0,0 @@ -#!/usr/bin/env python -# -# Copyright 2008,2009 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -from gnuradio import gr, eng_notation -from gnuradio import usrp -from gnuradio.eng_option import eng_option -from optparse import OptionParser -import sys - -from gnuradio import gpio - -class my_top_block(gr.top_block): - - def __init__(self, options): - gr.top_block.__init__(self) - - # Create a USRP source with GPIO FPGA build, then configure - u = usrp.source_s(decim_rate=options.decim,fpga_filename=gpio.fpga_filename) - - if options.force_complex_RXA: - # This is a dirty hack to force complex mode (receive both I and Q) on basicRX or LFRX - # This forces the receive board in RXA (side A) to be used - # FIXME: This has as a side effect that the gain for Q is not set. So only use with gain 0 (--gain 0) - options.rx_subdev_spec=(0,0) - u.set_mux(0x10) - if not (0==options.gain): - print "WARNING, you should set the gain to 0 with --gain 0 when using --force-complex-RXA" - print "The gain for Q will now still be zero while the gain for I is not" - #options.gain=0 - else: - if options.rx_subdev_spec is None: - options.rx_subdev_spec = usrp.pick_rx_subdevice(u) - u.set_mux(usrp.determine_rx_mux_value(u, options.rx_subdev_spec)) - - subdev = usrp.selected_subdev(u, options.rx_subdev_spec) - print "Using RX d'board %s" % (subdev.side_and_name(),) - input_rate = u.adc_freq()/u.decim_rate() - print "USB sample rate %s" % (eng_notation.num_to_str(input_rate)) - - if options.gain is None: - # if no gain was specified, use the mid-point in dB - g = subdev.gain_range() - options.gain = float(g[0]+g[1])/2 - - - #TODO setting gain on basicRX only sets the I channel, use a second subdev to set gain of Q channel - #see gnuradio-examples/multi-antenna for possible solutions - subdev.set_gain(options.gain) - - #TODO check if freq has same problem as gain when trying to use complex mode on basicRX - r = u.tune(0, subdev, options.freq) - if not r: - sys.stderr.write('Failed to set frequency\n') - raise SystemExit, 1 - - # Connect pipeline - src = u - if options.nsamples is not None: - head = gr.head(gr.sizeof_short, int(options.nsamples)*2) - self.connect(u, head) - src = head - - ana_strip = gr.and_const_ss(0xFFFE) - dig_strip = gr.and_const_ss(0x0001) - ana_sink = gr.file_sink(gr.sizeof_short, options.ana_filename) - dig_sink = gr.file_sink(gr.sizeof_short, options.dig_filename) - - self.connect(src, ana_strip, ana_sink) - self.connect(src, dig_strip, dig_sink) - -if __name__ == '__main__': - usage="%prog: [options] analog_filename digital_filename" - parser = OptionParser(option_class=eng_option, usage=usage) - parser.add_option("-R", "--rx-subdev-spec", type="subdev", default=(0, 0), - help="select USRP Rx side A or B (default=A)") - parser.add_option("-d", "--decim", type="int", default=16, - help="set fgpa decimation rate to DECIM [default=%default]") - parser.add_option("-f", "--freq", type="eng_float", default=None, - help="set frequency to FREQ", metavar="FREQ") - parser.add_option("-g", "--gain", type="eng_float", default=None, - help="set gain in dB (default is midpoint)") - parser.add_option("-N", "--nsamples", type="eng_float", default=None, - help="number of samples to collect [default=+inf]") - parser.add_option("-F", "--force-complex-RXA", action="store_true", default=False, - help="enable basicRX hack to force complex mode on basicRX and LFRX. Only works on side A. Only use with --gain 0") - (options, args) = parser.parse_args () - if len(args) != 2: - parser.print_help() - raise SystemExit, 1 - options.ana_filename = args[0] - options.dig_filename = args[1] - - if options.freq is None: - parser.print_help() - sys.stderr.write('You must specify the frequency with -f FREQ\n'); - raise SystemExit, 1 - - try: - tb = my_top_block(options) - tb.run() - except KeyboardInterrupt: - pass diff --git a/gr-gpio/src/python/gpio_usrp_fft.py b/gr-gpio/src/python/gpio_usrp_fft.py deleted file mode 100755 index c9ecb032d..000000000 --- a/gr-gpio/src/python/gpio_usrp_fft.py +++ /dev/null @@ -1,333 +0,0 @@ -#!/usr/bin/env python -# -# Copyright 2004,2005,2007,2008,2009,2010 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# - -from gnuradio import gr, gru -from gnuradio import usrp -from gnuradio import eng_notation -from gnuradio.eng_option import eng_option -from gnuradio.wxgui import stdgui2, fftsink2, waterfallsink2, scopesink2, form, slider -from optparse import OptionParser -import wx -import sys -import numpy - -from gnuradio import gpio - -def pick_subdevice(u): - """ - The user didn't specify a subdevice on the command line. - If there's a daughterboard on A, select A. - If there's a daughterboard on B, select B. - Otherwise, select A. - """ - if u.db[0][0].dbid() >= 0: # dbid is < 0 if there's no d'board or a problem - return (0, 0) - #if u.db[1][0].dbid() >= 0: #disable the use of RXB - # return (1, 0) - return (0, 0) - - -class app_top_block(stdgui2.std_top_block): - def __init__(self, frame, panel, vbox, argv): - stdgui2.std_top_block.__init__(self, frame, panel, vbox, argv) - - self.frame = frame - self.panel = panel - - parser = OptionParser(option_class=eng_option) - parser.add_option("-w", "--which", type="int", default=0, - help="select which USRP (0, 1, ...) default is %default", - metavar="NUM") -# parser.add_option("-R", "--rx-subdev-spec", type="subdev", default=None, -# help="select USRP Rx side A or B (default=first one with a daughterboard)") - parser.add_option("-A", "--antenna", default=None, - help="select Rx Antenna (only on RFX-series boards)") - parser.add_option("-d", "--decim", type="int", default=32, - help="set fgpa decimation rate to DECIM [default=%default]") - parser.add_option("-f", "--freq", type="eng_float", default=0.0, - help="set frequency to FREQ", metavar="FREQ") - parser.add_option("-g", "--gain", type="eng_float", default=None, - help="set gain in dB (default is midpoint)") - parser.add_option("-W", "--waterfall", action="store_true", default=False, - help="Enable waterfall display") - parser.add_option("-8", "--width-8", action="store_true", default=False, - help="Enable 8-bit samples across USB") -# parser.add_option( "--no-hb", action="store_true", default=False, -# help="don't use halfband filter in usrp") - parser.add_option("-S", "--oscilloscope", action="store_true", default=False, - help="Enable oscilloscope display (default)") - parser.add_option("-F", "--fft", action="store_true", default=False, - help="Enable FFT display") - parser.add_option("-n", "--frame-decim", type="int", default=1, - help="set oscope frame decimation factor to n [default=1]") - parser.add_option("-v", "--v-scale", type="eng_float", default=1, - help="set oscope initial V/div to SCALE [default=%default]") - parser.add_option("-t", "--t-scale", type="eng_float", default=10e-6, - help="set oscope initial s/div to SCALE [default=10us]") - parser.add_option ("--digital", action="store_true", default=False, - help="show (only) the digital wave on lsb (will be input from gpio pins with special usrp firmware)") - parser.add_option ("--analog", action="store_true", default=False, - help="show (only) the analog wave on msbs (will be input from analog inputs)") - parser.add_option ("--file", default=None, - help="input from file FILE in stead of USRP (will be input from raw file in interleaved short format)") - (options, args) = parser.parse_args() - if len(args) != 0: - parser.print_help() - sys.exit(1) - self.options = options - self.show_debug_info = True - - self.u = usrp.source_s(which=options.which, decim_rate=options.decim, fpga_filename=gpio.fpga_filename) - - print "Warning: This script only supports boards on RXA, change the script if you want otherwise" - #options.rx_subdev_spec=(0, 0)#force the use of RXA - options.rx_subdev_spec=None #force the use of RXA - - if options.rx_subdev_spec is None: - options.rx_subdev_spec = pick_subdevice(self.u) - - #This hardcoded mux setting is why this script only supports RXA - #We want both I and Q active, even when using basicRX - #set to 0x10 for RXA - #set to 0x32 for RXB - self.u.set_mux(0x10) #usrp.determine_rx_mux_value(self.u, options.rx_subdev_spec)) - - if options.width_8: - width = 8 - shift = 8 - format = self.u.make_format(width, shift) - print "format =", hex(format) - r = self.u.set_format(format) - print "set_format =", r - - # determine the daughterboard subdevice we're using - self.subdev = usrp.selected_subdev(self.u, options.rx_subdev_spec) - #if options.rx_subdev_spec==(0,0): - # rx_subdev_spec2=(0,1) - # self.subdev2 = usrp.selected_subdev(self.u, rx_subdev_spec2) - input_rate = self.u.adc_freq() / self.u.decim_rate() - - if options.waterfall: - self.scope = \ - waterfallsink2.waterfall_sink_c (panel, fft_size=1024, sample_rate=input_rate) - elif options.fft: - self.scope = fftsink2.fft_sink_c (panel, fft_size=1024, sample_rate=input_rate) - else: # options.oscilloscope: - #self.scope = scopesink2.scope_sink_c(panel, sample_rate=input_rate) - self.scope = scopesink2.scope_sink_c(panel, sample_rate=input_rate, - frame_decim=options.frame_decim, - v_scale=options.v_scale, - t_scale=options.t_scale) - - self.is2c = gr.interleaved_short_to_complex() - if not (options.file is None): - self.filesrc=gr.file_source(gr.sizeof_short, options.file, True) - thr = gr.throttle(gr.sizeof_short, input_rate) - self.connect(self.filesrc,thr,self.is2c,self.scope) - elif options.digital: - self.select_dig=gr.and_const_ss(0x0001) - self.connect(self.u, self.select_dig,self.is2c,self.scope) - elif options.analog: - self.select_ana=gr.and_const_ss(0xFFFE) - self.connect(self.u, self.select_ana,self.is2c,self.scope) - else: - self.connect(self.u,self.is2c,self.scope) - - self._build_gui(vbox) - self._setup_events() - - # set initial values - - if options.gain is None: - # if no gain was specified, use the mid-point in dB - g = self.subdev.gain_range() - options.gain = float(g[0]+g[1])/2 - - if options.freq is None: - # if no freq was specified, use the mid-point - r = self.subdev.freq_range() - options.freq = float(r[0]+r[1])/2 - - self.set_gain(options.gain) - - if options.antenna is not None: - print "Selecting antenna %s" % (options.antenna,) - self.subdev.select_rx_antenna(options.antenna) - - if self.show_debug_info: - self.myform['decim'].set_value(self.u.decim_rate()) - self.myform['fs@usb'].set_value(self.u.adc_freq() / self.u.decim_rate()) - self.myform['dbname'].set_value(self.subdev.name()) - self.myform['baseband'].set_value(0) - self.myform['ddc'].set_value(0) - - if not(self.set_freq(options.freq)): - self._set_status_msg("Failed to set initial frequency") - - def _set_status_msg(self, msg): - self.frame.GetStatusBar().SetStatusText(msg, 0) - - def _build_gui(self, vbox): - - def _form_set_freq(kv): - return self.set_freq(kv['freq']) - - vbox.Add(self.scope.win, 10, wx.EXPAND) - - # add control area at the bottom - self.myform = myform = form.form() - hbox = wx.BoxSizer(wx.HORIZONTAL) - hbox.Add((5,0), 0, 0) - myform['freq'] = form.float_field( - parent=self.panel, sizer=hbox, label="Center freq", weight=1, - callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg)) - - hbox.Add((5,0), 0, 0) - g = self.subdev.gain_range() - myform['gain'] = form.slider_field(parent=self.panel, sizer=hbox, label="Gain", - weight=3, - min=int(g[0]), max=int(g[1]), - callback=self.set_gain) - - hbox.Add((5,0), 0, 0) - vbox.Add(hbox, 0, wx.EXPAND) - - self._build_subpanel(vbox) - - def _build_subpanel(self, vbox_arg): - # build a secondary information panel (sometimes hidden) - - # FIXME figure out how to have this be a subpanel that is always - # created, but has its visibility controlled by foo.Show(True/False) - - def _form_set_decim(kv): - return self.set_decim(kv['decim']) - - if not(self.show_debug_info): - return - - panel = self.panel - vbox = vbox_arg - myform = self.myform - - #panel = wx.Panel(self.panel, -1) - #vbox = wx.BoxSizer(wx.VERTICAL) - - hbox = wx.BoxSizer(wx.HORIZONTAL) - hbox.Add((5,0), 0) - - myform['decim'] = form.int_field( - parent=panel, sizer=hbox, label="Decim", - callback=myform.check_input_and_call(_form_set_decim, self._set_status_msg)) - - hbox.Add((5,0), 1) - myform['fs@usb'] = form.static_float_field( - parent=panel, sizer=hbox, label="Fs@USB") - - hbox.Add((5,0), 1) - myform['dbname'] = form.static_text_field( - parent=panel, sizer=hbox) - - hbox.Add((5,0), 1) - myform['baseband'] = form.static_float_field( - parent=panel, sizer=hbox, label="Analog BB") - - hbox.Add((5,0), 1) - myform['ddc'] = form.static_float_field( - parent=panel, sizer=hbox, label="DDC") - - hbox.Add((5,0), 0) - vbox.Add(hbox, 0, wx.EXPAND) - - - def set_freq(self, target_freq): - """ - Set the center frequency we're interested in. - - @param target_freq: frequency in Hz - @rypte: bool - - Tuning is a two step process. First we ask the front-end to - tune as close to the desired frequency as it can. Then we use - the result of that operation and our target_frequency to - determine the value for the digital down converter. - """ - r = self.u.tune(0, self.subdev, target_freq) - - if r: - self.myform['freq'].set_value(target_freq) # update displayed value - if self.show_debug_info: - self.myform['baseband'].set_value(r.baseband_freq) - self.myform['ddc'].set_value(r.dxc_freq) - if not self.options.waterfall and not self.options.oscilloscope: - self.scope.set_baseband_freq(target_freq) - return True - - return False - - def set_gain(self, gain): - self.myform['gain'].set_value(gain) # update displayed value - self.subdev.set_gain(gain) - - def set_decim(self, decim): - ok = self.u.set_decim_rate(decim) - if not ok: - print "set_decim failed" - input_rate = self.u.adc_freq() / self.u.decim_rate() - self.scope.set_sample_rate(input_rate) - if self.show_debug_info: # update displayed values - self.myform['decim'].set_value(self.u.decim_rate()) - self.myform['fs@usb'].set_value(self.u.adc_freq() / self.u.decim_rate()) - return ok - - def _setup_events(self): - if not self.options.waterfall and not self.options.oscilloscope: - self.scope.win.Bind(wx.EVT_LEFT_DCLICK, self.evt_left_dclick) - - def evt_left_dclick(self, event): - (ux, uy) = self.scope.win.GetXY(event) - if event.CmdDown(): - # Re-center on maximum power - points = self.scope.win._points - if self.scope.win.peak_hold: - if self.scope.win.peak_vals is not None: - ind = numpy.argmax(self.scope.win.peak_vals) - else: - ind = int(points.shape()[0]/2) - else: - ind = numpy.argmax(points[:,1]) - (freq, pwr) = points[ind] - target_freq = freq/self.scope.win._scale_factor - print ind, freq, pwr - self.set_freq(target_freq) - else: - # Re-center on clicked frequency - target_freq = ux/self.scope.win._scale_factor - self.set_freq(target_freq) - - -def main (): - app = stdgui2.stdapp(app_top_block, "USRP FFT", nstatus=1) - app.MainLoop() - -if __name__ == '__main__': - main () diff --git a/gr-gpio/src/python/gpio_usrp_siggen.py b/gr-gpio/src/python/gpio_usrp_siggen.py deleted file mode 100755 index 0e483c35d..000000000 --- a/gr-gpio/src/python/gpio_usrp_siggen.py +++ /dev/null @@ -1,208 +0,0 @@ -#!/usr/bin/env python -# -# Copyright 2008 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# -from gnuradio import gr, gru -from gnuradio import usrp -from gnuradio.eng_option import eng_option -from gnuradio import eng_notation -from optparse import OptionParser -import sys - -from gnuradio import gpio - -class my_top_block(gr.top_block): - def __init__ (self): - gr.top_block.__init__(self) - - # controllable values - self.interp = 64 - self.waveform_type = gr.GR_CONST_WAVE - self.waveform_ampl = 16000 - self.waveform_freq = 100.12345e3 - self.waveform_offset = 0 - self._instantiate_blocks () - self.set_waveform_type (self.waveform_type) - - def usb_freq (self): - return self.u.dac_freq() / self.interp - - def usb_throughput (self): - return self.usb_freq () * 4 - - def set_waveform_type (self, type): - ''' - valid waveform types are: gr.GR_SIN_WAVE, gr.GR_CONST_WAVE, - gr.GR_UNIFORM and gr.GR_GAUSSIAN - ''' - self._configure_graph (type) - self.waveform_type = type - - def set_waveform_ampl (self, ampl): - self.waveform_ampl = ampl - self.siggen.set_amplitude (ampl) - self.noisegen.set_amplitude (ampl) - - def set_waveform_freq (self, freq): - self.waveform_freq = freq - self.siggen.set_frequency (freq) - - def set_waveform_offset (self, offset): - self.waveform_offset = offset - self.siggen.set_offset (offset) - - def set_interpolator (self, interp): - self.interp = interp - self.siggen.set_sampling_freq (self.usb_freq ()) - self.u.set_interp_rate (interp) - - def _instantiate_blocks (self): - self.src = None - self.u = usrp.sink_c (0, self.interp,fpga_filename=gpio.fpga_filename) - - self.siggen = gr.sig_source_c (self.usb_freq (), - gr.GR_SIN_WAVE, - self.waveform_freq, - self.waveform_ampl, - self.waveform_offset) - - self.noisegen = gr.noise_source_c (gr.GR_UNIFORM, - self.waveform_ampl) - self.vecgen = gr.vector_source_c ([complex(1.0,0.0),complex(0.0,0.0),complex(1.0,1.0),complex(0.0,1.0)],True) - - # self.file_sink = gr.file_sink (gr.sizeof_gr_complex, "siggen.dat") - - def _configure_graph (self, type): - try: - self.lock() - self.disconnect_all () - if type == gr.GR_SIN_WAVE: - self.connect (self.siggen, self.u) - # self.connect (self.siggen, self.file_sink) - self.siggen.set_waveform (type) - self.src = self.siggen - elif type == gr.GR_UNIFORM or type == gr.GR_GAUSSIAN: - self.connect (self.noisegen, self.u) - self.noisegen.set_type (type) - self.src = self.noisegen - elif type == gr.GR_CONST_WAVE: - self.connect (self.vecgen, self.u) - self.src = self.vecgen - else: - raise ValueError, type - finally: - self.unlock() - - def set_freq(self, target_freq): - """ - Set the center frequency we're interested in. - - @param target_freq: frequency in Hz - @rypte: bool - - Tuning is a two step process. First we ask the front-end to - tune as close to the desired frequency as it can. Then we use - the result of that operation and our target_frequency to - determine the value for the digital up converter. - """ - r = self.u.tune(self.subdev._which, self.subdev, target_freq) - if r: - #print "r.baseband_freq =", eng_notation.num_to_str(r.baseband_freq) - #print "r.dxc_freq =", eng_notation.num_to_str(r.dxc_freq) - #print "r.residual_freq =", eng_notation.num_to_str(r.residual_freq) - #print "r.inverted =", r.inverted - return True - - return False - - - -def main (): - parser = OptionParser (option_class=eng_option) - parser.add_option ("-T", "--tx-subdev-spec", type="subdev", default=(0, 0), - help="select USRP Tx side A or B") - parser.add_option ("-f", "--rf-freq", type="eng_float", default=None, - help="set RF center frequency to FREQ") - parser.add_option ("-i", "--interp", type="int", default=512, - help="set fgpa interpolation rate to INTERP [default=%default]") - parser.add_option ("--sine", dest="type", action="store_const", const=gr.GR_SIN_WAVE, - help="generate a complex sinusoid [default]", default=gr.GR_SIN_WAVE) - - parser.add_option ("--gaussian", dest="type", action="store_const", const=gr.GR_GAUSSIAN, - help="generate Gaussian random output") - parser.add_option ("--uniform", dest="type", action="store_const", const=gr.GR_UNIFORM, - help="generate Uniform random output") - - parser.add_option ("-w", "--waveform-freq", type="eng_float", default=100e3, - help="set waveform frequency to FREQ [default=%default]") - parser.add_option ("-a", "--amplitude", type="eng_float", default=16e3, - help="set waveform amplitude to AMPLITUDE [default=%default]", metavar="AMPL") - parser.add_option ("-g", "--gain", type="eng_float", default=None, - help="set output gain to GAIN [default=%default]") - parser.add_option ("-o", "--offset", type="eng_float", default=0, - help="set waveform offset to OFFSET [default=%default]") - parser.add_option ("--digital", dest="type", action="store_const", const=gr.GR_CONST_WAVE, - help="generate (only) a digital wave on lsb (will be output on gpio pins with special usrp firmware)") - (options, args) = parser.parse_args () - - if len(args) != 0: - parser.print_help() - raise SystemExit - - if options.rf_freq is None: - sys.stderr.write("usrp_siggen: must specify RF center frequency with -f RF_FREQ\n") - parser.print_help() - raise SystemExit - - tb = my_top_block() - tb.set_interpolator (options.interp) - tb.set_waveform_type (options.type) - tb.set_waveform_freq (options.waveform_freq) - tb.set_waveform_ampl (options.amplitude) - tb.set_waveform_offset (options.offset) - - # determine the daughterboard subdevice we're using - if options.tx_subdev_spec is None: - options.tx_subdev_spec = usrp.pick_tx_subdevice(tb.u) - - m = usrp.determine_tx_mux_value(tb.u, options.tx_subdev_spec) - #print "mux = %#04x" % (m,) - tb.u.set_mux(m) - tb.subdev = usrp.selected_subdev(tb.u, options.tx_subdev_spec) - print "Using TX d'board %s" % (tb.subdev.side_and_name(),) - - if options.gain is None: - tb.subdev.set_gain(tb.subdev.gain_range()[1]) # set max Tx gain - else: - tb.subdev.set_gain(options.gain) # set max Tx gain - - if not tb.set_freq(options.rf_freq): - sys.stderr.write('Failed to set RF frequency\n') - raise SystemExit - - tb.subdev.set_enable(True) # enable transmitter - - try: - tb.run() - except KeyboardInterrupt: - pass - -if __name__ == '__main__': - main () |