diff options
Diffstat (limited to 'gnuradio-examples/python/hier/usrp')
| -rw-r--r-- | gnuradio-examples/python/hier/usrp/Makefile.am | 25 | ||||
| -rwxr-xr-x | gnuradio-examples/python/hier/usrp/usrp_fft.py | 253 |
2 files changed, 278 insertions, 0 deletions
diff --git a/gnuradio-examples/python/hier/usrp/Makefile.am b/gnuradio-examples/python/hier/usrp/Makefile.am new file mode 100644 index 000000000..20a21cf66 --- /dev/null +++ b/gnuradio-examples/python/hier/usrp/Makefile.am @@ -0,0 +1,25 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +EXTRA_DIST = \ + usrp_fft.py + +MOSTLYCLEANFILES = *.pyc *~ diff --git a/gnuradio-examples/python/hier/usrp/usrp_fft.py b/gnuradio-examples/python/hier/usrp/usrp_fft.py new file mode 100755 index 000000000..5cd5c1482 --- /dev/null +++ b/gnuradio-examples/python/hier/usrp/usrp_fft.py @@ -0,0 +1,253 @@ +#!/usr/bin/env python +# +# Copyright 2004,2005,2007 Free Software Foundation, Inc. +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +from gnuradio import gr, gru +from gnuradio import usrp +from gnuradio import eng_notation +from gnuradio.eng_option import eng_option +from gnuradio.wxgui import stdgui2, fftsink2, waterfallsink2, scopesink2, form, slider +from optparse import OptionParser +import wx +import sys + + +def pick_subdevice(u): + """ + The user didn't specify a subdevice on the command line. + If there's a daughterboard on A, select A. + If there's a daughterboard on B, select B. + Otherwise, select A. + """ + if u.db[0][0].dbid() >= 0: # dbid is < 0 if there's no d'board or a problem + return (0, 0) + if u.db[1][0].dbid() >= 0: + return (1, 0) + return (0, 0) + + +class app_top_block(stdgui2.std_top_block): + def __init__(self, frame, panel, vbox, argv): + stdgui2.std_top_block.__init__(self, frame, panel, vbox, argv) + + self.frame = frame + self.panel = panel + + parser = OptionParser(option_class=eng_option) + parser.add_option("-R", "--rx-subdev-spec", type="subdev", default=None, + help="select USRP Rx side A or B (default=first one with a daughterboard)") + parser.add_option("-d", "--decim", type="int", default=16, + help="set fgpa decimation rate to DECIM [default=%default]") + parser.add_option("-f", "--freq", type="eng_float", default=None, + help="set frequency to FREQ", metavar="FREQ") + parser.add_option("-g", "--gain", type="eng_float", default=None, + help="set gain in dB (default is midpoint)") + parser.add_option("-W", "--waterfall", action="store_true", default=False, + help="Enable waterfall display") + parser.add_option("-8", "--width-8", action="store_true", default=False, + help="Enable 8-bit samples across USB") + parser.add_option("-S", "--oscilloscope", action="store_true", default=False, + help="Enable oscilloscope display") + (options, args) = parser.parse_args() + if len(args) != 0: + parser.print_help() + sys.exit(1) + + self.show_debug_info = True + + self.u = usrp.source_c(decim_rate=options.decim) + self.define_component("usrp", self.u) + if options.rx_subdev_spec is None: + options.rx_subdev_spec = pick_subdevice(self.u) + self.u.set_mux(usrp.determine_rx_mux_value(self.u, options.rx_subdev_spec)) + + if options.width_8: + width = 8 + shift = 8 + format = self.u.make_format(width, shift) + print "format =", hex(format) + r = self.u.set_format(format) + print "set_format =", r + + # determine the daughterboard subdevice we're using + self.subdev = usrp.selected_subdev(self.u, options.rx_subdev_spec) + + input_rate = self.u.adc_freq() / self.u.decim_rate() + + + if options.waterfall: + self.scope = waterfallsink2.waterfall_sink_c (panel, fft_size=1024, sample_rate=input_rate) + elif options.oscilloscope: + self.scope = scopesink2.scope_sink_c(panel, sample_rate=input_rate) + else: + self.scope = fftsink2.fft_sink_c (panel, fft_size=1024, sample_rate=input_rate) + self.define_component("scope", self.scope) + + # Ultimately this will be + # self.connect("usrp scope") + self.connect("usrp", 0, "scope", 0) + + self._build_gui(vbox) + + # set initial values + + if options.gain is None: + # if no gain was specified, use the mid-point in dB + g = self.subdev.gain_range() + options.gain = float(g[0]+g[1])/2 + + if options.freq is None: + # if no freq was specified, use the mid-point + r = self.subdev.freq_range() + options.freq = float(r[0]+r[1])/2 + + self.set_gain(options.gain) + + if self.show_debug_info: + self.myform['decim'].set_value(self.u.decim_rate()) + self.myform['fs@usb'].set_value(self.u.adc_freq() / self.u.decim_rate()) + self.myform['dbname'].set_value(self.subdev.name()) + self.myform['baseband'].set_value(0) + self.myform['ddc'].set_value(0) + + if not(self.set_freq(options.freq)): + self._set_status_msg("Failed to set initial frequency") + + def _set_status_msg(self, msg): + self.frame.GetStatusBar().SetStatusText(msg, 0) + + def _build_gui(self, vbox): + + def _form_set_freq(kv): + return self.set_freq(kv['freq']) + + vbox.Add(self.scope.win, 10, wx.EXPAND) + + # add control area at the bottom + self.myform = myform = form.form() + hbox = wx.BoxSizer(wx.HORIZONTAL) + hbox.Add((5,0), 0, 0) + myform['freq'] = form.float_field( + parent=self.panel, sizer=hbox, label="Center freq", weight=1, + callback=myform.check_input_and_call(_form_set_freq, self._set_status_msg)) + + hbox.Add((5,0), 0, 0) + g = self.subdev.gain_range() + myform['gain'] = form.slider_field(parent=self.panel, sizer=hbox, label="Gain", + weight=3, + min=int(g[0]), max=int(g[1]), + callback=self.set_gain) + + hbox.Add((5,0), 0, 0) + vbox.Add(hbox, 0, wx.EXPAND) + + self._build_subpanel(vbox) + + def _build_subpanel(self, vbox_arg): + # build a secondary information panel (sometimes hidden) + + # FIXME figure out how to have this be a subpanel that is always + # created, but has its visibility controlled by foo.Show(True/False) + + def _form_set_decim(kv): + return self.set_decim(kv['decim']) + + if not(self.show_debug_info): + return + + panel = self.panel + vbox = vbox_arg + myform = self.myform + + #panel = wx.Panel(self.panel, -1) + #vbox = wx.BoxSizer(wx.VERTICAL) + + hbox = wx.BoxSizer(wx.HORIZONTAL) + hbox.Add((5,0), 0) + + myform['decim'] = form.int_field( + parent=panel, sizer=hbox, label="Decim", + callback=myform.check_input_and_call(_form_set_decim, self._set_status_msg)) + + hbox.Add((5,0), 1) + myform['fs@usb'] = form.static_float_field( + parent=panel, sizer=hbox, label="Fs@USB") + + hbox.Add((5,0), 1) + myform['dbname'] = form.static_text_field( + parent=panel, sizer=hbox) + + hbox.Add((5,0), 1) + myform['baseband'] = form.static_float_field( + parent=panel, sizer=hbox, label="Analog BB") + + hbox.Add((5,0), 1) + myform['ddc'] = form.static_float_field( + parent=panel, sizer=hbox, label="DDC") + + hbox.Add((5,0), 0) + vbox.Add(hbox, 0, wx.EXPAND) + + + def set_freq(self, target_freq): + """ + Set the center frequency we're interested in. + + @param target_freq: frequency in Hz + @rypte: bool + + Tuning is a two step process. First we ask the front-end to + tune as close to the desired frequency as it can. Then we use + the result of that operation and our target_frequency to + determine the value for the digital down converter. + """ + r = self.u.tune(0, self.subdev, target_freq) + + if r: + self.myform['freq'].set_value(target_freq) # update displayed value + if self.show_debug_info: + self.myform['baseband'].set_value(r.baseband_freq) + self.myform['ddc'].set_value(r.dxc_freq) + return True + + return False + + def set_gain(self, gain): + self.myform['gain'].set_value(gain) # update displayed value + self.subdev.set_gain(gain) + + def set_decim(self, decim): + ok = self.u.set_decim_rate(decim) + if not ok: + print "set_decim failed" + input_rate = self.u.adc_freq() / self.u.decim_rate() + self.scope.set_sample_rate(input_rate) + if self.show_debug_info: # update displayed values + self.myform['decim'].set_value(self.u.decim_rate()) + self.myform['fs@usb'].set_value(self.u.adc_freq() / self.u.decim_rate()) + return ok + +def main (): + app = stdgui2.stdapp(app_top_block, "USRP FFT", nstatus=1) + app.MainLoop() + +if __name__ == '__main__': + main () |