.. _simulation_and_runtime: ********************** Simulation and runtime ********************** .. _simulation_options: Simulation options ================== In most system environments, it is possible to pass options while invoking a program. Contrary to most programming languages, there is no standard method in VHDL to obtain the arguments or to set the exit status. In GHDL, it is impossible to pass parameters to your design. A later version could do it through the generics interfaces of the top entity. However, the GHDL runtime behaviour can be modified with some options; for example, it is possible to stop simulation after a certain time. The exit status of the simulation is :samp:`EXIT_SUCCESS` (0) if the simulation completes, or :samp:`EXIT_FAILURE` (1) in case of error (assertion failure, overflow or any constraint error). Here is the list of the most useful options. Some debugging options are also available, but not described here. The :option:`--help` options lists all options available, including the debugging one. .. option:: --assert-level=<LEVEL> Select the assertion level at which an assertion violation stops the simulation. `LEVEL` is the name from the `severity_level` enumerated type defined in the `standard` package or the :samp:`none` name. By default, only assertion violation of severity level :samp:`failure` stops the simulation. For example, if `LEVEL` was :samp:`warning`, any assertion violation with severity level :samp:`warning`, :samp:`error` or :samp:`failure` would stop simulation, but the assertion violation at the :samp:`note` severity level would only display a message. Option :option:`--assert-level=none` prevents any assertion violation to stop simulation. .. option:: --ieee-asserts=<POLICY> Select how the assertions from :samp:`ieee` units are handled. `POLICY` can be :samp:`enable` (the default), :samp:`disable` which disables all assertion from :samp:`ieee` packages and :samp:`disable-at-0` which disables only at start of simulation. This option can be useful to avoid assertion message from :samp:`ieee.numeric_std` (and other :samp:`ieee` packages). .. option:: --stop-time=<TIME> Stop the simulation after :samp:`TIME`. :samp:`TIME` is expressed as a time value, *without* any space. The time is the simulation time, not the real clock time. For example:: $ ./my_design --stop-time=10ns $ ./my_design --stop-time=ps .. option:: --stop-delta=<N> Stop the simulation after `N` delta cycles in the same current time. .. index:: display time .. option:: --disp-time Display the time and delta cycle number as simulation advances. .. option:: --disp-tree[=<KIND>] .. index:: display design hierarchy Display the design hierarchy as a tree of instantiated design entities. This may be useful to understand the structure of a complex design. `KIND` is optional, but if set must be one of: * none Do not display hierarchy. Same as if the option was not present. * inst Display entities, architectures, instances, blocks and generates statements. * proc Like :samp:`inst` but also display processes. * port Like :samp:`proc` but display ports and signals too. If `KIND` is not specified, the hierarchy is displayed with the :samp:`port` mode. .. option:: --no-run Do not simulate, only elaborate. This may be used with :option:`--disp-tree` to display the tree without simulating the whole design. .. option:: --vcd=<FILENAME> .. option:: --vcdgz=<FILENAME> .. index:: vcd .. index:: value change dump .. index:: dump of signals Option :option:`--vcd` dumps into the VCD file `FILENAME` the signal values before each non-delta cycle. If `FILENAME` is :samp:`-`, then the standard output is used, otherwise a file is created or overwritten. The :option:`--vcdgz` option is the same as the *--vcd* option, but the output is compressed using the `zlib` (`gzip` compression). However, you can't use the :samp:`-` filename. Furthermore, only one VCD file can be written. :dfn:`VCD` (value change dump) is a file format defined by the `verilog` standard and used by virtually any wave viewer. Since it comes from `verilog`, only a few VHDL types can be dumped. GHDL dumps only signals whose base type is of the following: * types defined in the :samp:`std.standard` package: * :samp:`bit` * :samp:`bit_vector` * types defined in the :samp:`ieee.std_logic_1164` package: * :samp:`std_ulogic` * :samp:`std_logic` (because it is a subtype of :samp:`std_ulogic`) * :samp:`std_ulogic_vector` * :samp:`std_logic_vector` * any integer type I have successfully used `gtkwave` to view VCD files. Currently, there is no way to select signals to be dumped: all signals are dumped, which can generate big files. It is very unfortunate there is no standard or well-known wave file format supporting VHDL types. If you are aware of such a free format, please mail me (:ref:`Reporting_bugs`). .. option:: --fst=<FILENAME> Write the waveforms into a `fst`, that can be displayed by `gtkwave`. The `fst` files are much smaller than VCD or `GHW` files, but it handles only the same signals as the VCD format. .. option:: --wave=<FILENAME> Write the waveforms into a `ghw` (GHdl Waveform) file. Currently, all the signals are dumped into the waveform file, you cannot select a hierarchy of signals to be dumped. The format of this file was defined by myself and is not yet completely fixed. It may change slightly. The :samp:`gtkwave` tool can read the GHW files. Contrary to VCD files, any VHDL type can be dumped into a GHW file. .. option:: --sdf=<PATH>=<FILENAME> Do VITAL annotation on `PATH` with SDF file :file:`FILENAME`. `PATH` is a path of instances, separated with :samp:`.` or :samp:`/`. Any separator can be used. Instances are component instantiation labels, generate labels or block labels. Currently, you cannot use an indexed name. Specifying a delay:: --sdf=min=<PATH>=<FILENAME> --sdf=typ=<PATH>=<FILENAME> --sdf=max=<PATH>=<FILENAME> If the option contains a type of delay, that is :samp:`min=`, :samp:`typ=` or :samp:`max=`, the annotator use respectively minimum, typical or maximum values. If the option does not contain a type of delay, the annotator use the typical delay. See :ref:`Backannotation`, for more details. .. option:: --help Display a short description of the options accepted by the runtime library. Debugging VHDL programs ======================= .. index:: debugging .. index:: `__ghdl_fatal` Debugging VHDL programs using `GDB` is possible only on GNU/Linux systems. `GDB` is a general purpose debugger for programs compiled by `GCC`. Currently, there is no VHDL support for `GDB`. It may be difficult to inspect variables or signals in `GDB`, however, `GDB` is still able to display the stack frame in case of error or to set a breakpoint at a specified line. `GDB` can be useful to precisely catch a runtime error, such as indexing an array beyond its bounds. All error check subprograms call the `__ghdl_fatal` procedure. Therefore, to catch runtime error, set a breakpoint like this: (gdb) break __ghdl_fatal When the breakpoint is hit, use the `where` or `bt` command to display the stack frames.