from PyQt4 import QtGui

import os
import sys
import shutil
import TrackWidget
from xml.etree import ElementTree as ET

class Convert:
    """
    This class has all the necessary function required to convert kicad netlist to ngspice netlist.
    """
    def __init__(self,sourcelisttrack,source_entry_var,schematicInfo,clarg1):
        print "Start Conversion"
        self.sourcelisttrack = sourcelisttrack
        self.schematicInfo = schematicInfo
        self.entry_var = source_entry_var
        self.sourcelistvalue = []
        self.clarg1=clarg1
        
              
    def addSourceParameter(self):
        """
        This function add the source details to schematicInfo
        """
        #print "Adding Source parameter"
        #print "SourceListTrack : ",self.sourcelisttrack
        #print "Schematic Info ",self.schematicInfo
        #print "Entry Var",self.entry_var
        self.start = 0
        self.end = 0
        
        for compline in self.sourcelisttrack:
            self.index = compline[0]
            self.addline = self.schematicInfo[self.index]
            if compline[1] == 'sine':
                try:
                    self.start = compline[2]
                    self.end = compline[3]
                    vo_val = str(self.entry_var[self.start].text()) if len(str(self.entry_var[self.start].text())) > 0 else '0'
                    va_val = str(self.entry_var[self.start+1].text()) if len(str(self.entry_var[self.start+1].text())) > 0 else '0'
                    freq_val = str(self.entry_var[self.start+2].text()) if len(str(self.entry_var[self.start+2].text())) > 0 else '0'
                    td_val = str(self.entry_var[self.start+3].text()) if len(str(self.entry_var[self.start+3].text())) > 0 else '0'
                    theta_val = str(self.entry_var[self.end].text()) if len(str(self.entry_var[self.end].text())) > 0 else '0'
                    self.addline = self.addline.partition('(')[0] + "("+vo_val+" "+va_val+" "+freq_val+" "+td_val+" "+theta_val+")"
                    self.sourcelistvalue.append([self.index,self.addline])
                except:
                    print "Caught an exception in sine voltage source ",self.addline
                    
            elif compline[1] == 'pulse':
                try:
                    self.start = compline[2]
                    self.end = compline[3]
                    v1_val = str(self.entry_var[self.start].text()) if len(str(self.entry_var[self.start].text())) > 0 else '0'
                    v2_val = str(self.entry_var[self.start+1].text()) if len(str(self.entry_var[self.start+1].text())) > 0 else '0'
                    td_val = str(self.entry_var[self.start+2].text()) if len(str(self.entry_var[self.start+2].text())) > 0 else '0'
                    tr_val = str(self.entry_var[self.start+3].text()) if len(str(self.entry_var[self.start+3].text())) > 0 else '0'
                    tf_val = str(self.entry_var[self.start+4].text()) if len(str(self.entry_var[self.start+4].text())) > 0 else '0'
                    pw_val = str(self.entry_var[self.start+5].text()) if len(str(self.entry_var[self.start+5].text())) > 0 else '0'
                    tp_val = str(self.entry_var[self.end].text()) if len(str(self.entry_var[self.end].text())) > 0 else '0'

                    self.addline = self.addline.partition('(')[0] + "("+v1_val+" "+v2_val+" "+td_val+" "+tr_val+" "+tf_val+" "+pw_val+" "+tp_val+")"
                    self.sourcelistvalue.append([self.index,self.addline])
                except:
                    print "Caught an exception in pulse voltage source ",self.addline 
                    
            elif compline[1] == 'pwl':
                try:
                    self.start = compline[2]
                    self.end = compline[3]
                    t_v_val = str(self.entry_var[self.start].text()) if len(str(self.entry_var[self.start].text())) > 0 else '0 0'
                    self.addline = self.addline.partition('(')[0] + "("+t_v_val+")"
                    self.sourcelistvalue.append([self.index,self.addline])
                except:
                    print "Caught an exception in pwl voltage source ",self.addline
                    
            elif compline[1] == 'ac':
                try:
                    self.start = compline[2]
                    self.end = compline[3]
                    va_val=str(self.entry_var[self.start].text()) if len(str(self.entry_var[self.start].text())) > 0 else '0'
                    ph_val=str(self.entry_var[self.start+1].text()) if len(str(self.entry_var[self.start+1].text())) > 0 else '0'
                    self.addline = ' '.join(self.addline.split())
                    self.addline = self.addline.partition('ac')[0] +" "+'ac'+" "+ va_val+" "+ph_val
                    self.sourcelistvalue.append([self.index,self.addline]) 
                except:
                    print "Caught an exception in ac voltage source ",self.addline
                    
            elif compline[1] == 'dc':
                try:
                    self.start = compline[2]
                    self.end = compline[3]
                    v1_val = str(self.entry_var[self.start].text()) if len(str(self.entry_var[self.start].text())) > 0 else '0'
                    self.addline = ' '.join(self.addline.split())    
                    self.addline = self.addline.partition('dc')[0] + " " +'dc'+ " "+v1_val
                    self.sourcelistvalue.append([self.index,self.addline]) 
                except:
                    print "Caught an exception in dc voltage source",self.addline
                    
            elif compline[1] == 'exp':
                try:
                    self.start = compline[2]
                    self.end = compline[3]
                    v1_val = str(self.entry_var[self.start].text()) if len(str(self.entry_var[self.start].text())) > 0 else '0'
                    v2_val = str(self.entry_var[self.start+1].text()) if len(str(self.entry_var[self.start+1].text())) > 0 else '0'
                    td1_val = str(self.entry_var[self.start+2].text()) if len(str(self.entry_var[self.start+2].text())) > 0 else '0'
                    tau1_val = str(self.entry_var[self.start+3].text()) if len(str(self.entry_var[self.start+3].text())) > 0 else '0'
                    td2_val = str(self.entry_var[self.start+4].text()) if len(str(self.entry_var[self.start+4].text())) > 0 else '0'
                    tau2_val = str(self.entry_var[self.end].text()) if len(str(self.entry_var[self.end].text())) > 0 else '0'

                    self.addline = self.addline.partition('(')[0] + "("+v1_val+" "+v2_val+" "+td1_val+" "+tau1_val+" "+td2_val+" "+tau2_val+")"
                    self.sourcelistvalue.append([self.index,self.addline])
                except:
                    print "Caught an exception in exp voltage source ",self.addline 
                    
        #Updating Schematic with source value
        for item in self.sourcelistvalue:
            del self.schematicInfo[item[0]]
            self.schematicInfo.insert(item[0],item[1])   
            
        return self.schematicInfo
    
       
    def analysisInsertor(self,ac_entry_var,dc_entry_var, tran_entry_var,set_checkbox,ac_parameter,dc_parameter,tran_parameter,ac_type,op_check):
        """
        This function creates an analysis file in current project
        """
        self.ac_entry_var = ac_entry_var
        self.dc_entry_var = dc_entry_var
        self.tran_entry_var = tran_entry_var
        self.set_checkbox = set_checkbox
        self.ac_parameter= ac_parameter
        self.dc_parameter= dc_parameter
        self.trans_parameter = tran_parameter
        self.ac_type= ac_type
        self.op_check = op_check
        self.no=0
        
        self.variable=self.set_checkbox
        self.direct= self.clarg1
        (filepath, filemname)= os.path.split(self.direct)
        self.Fileopen = os.path.join(filepath, "analysis")  
        self.writefile= open(self.Fileopen,"w")
        if self.variable== 'AC':
            self.no=0
            self.writefile.write(".ac"+' ' + self.ac_type + ' '+ str(self.defaultvalue(self.ac_entry_var[self.no+2].text()))+' ' + str(self.defaultvalue(self.ac_entry_var[self.no].text())) + self.ac_parameter[self.no]+ ' ' + str(self.defaultvalue(self.ac_entry_var[self.no+1].text())) + self.ac_parameter[self.no+1] )        

        elif self.variable=='DC':
            if self.op_check[-1] == 1:
                self.no=0 
                self.writefile.write(".op")
            elif self.op_check[-1] == 0:
                self.no=0 
                self.writefile.write(".dc" +' '+ str(self.dc_entry_var[self.no].text())+ ' '+ str(self.defaultvalue(self.dc_entry_var[self.no+1].text())) + self.converttosciform(self.dc_parameter[self.no]) + ' '+ str(self.defaultvalue(self.dc_entry_var[self.no+3].text()))+ self.converttosciform(self.dc_parameter[self.no+2]) + ' '+ str(self.defaultvalue(self.dc_entry_var[self.no+2].text())) + self.converttosciform(self.dc_parameter[self.no+1]))
        elif self.variable == 'TRAN':
            self.no= 0
            self.writefile.write(".tran" + ' '+ str(self.defaultvalue(self.tran_entry_var[self.no+1].text())) + self.converttosciform(self.trans_parameter[self.no+1]) + ' ' + str(self.defaultvalue(self.tran_entry_var[self.no+2].text())) + self.converttosciform(self.trans_parameter[self.no+2])+' '+ str(self.defaultvalue(self.tran_entry_var[self.no].text()))+ self.converttosciform(self.trans_parameter[self.no]))

        else:
            pass
        self.writefile.close()
        
    def converttosciform(self, string_obj):
        """
        This function is used for scientific conversion.
        """
        self.string_obj = string_obj
        if self.string_obj[0] == 'm':
            return "e-03"
        elif self.string_obj[0] == 'u':
            return "e-06"
        elif self.string_obj[0] == 'n':
            return "e-09"
        elif self.string_obj[0] == 'p':
            return "e-12"
        else:
            return "e-00"
        
    def defaultvalue(self, value):
        """
        This function select default value as 0 if Analysis widget do not hold any value.
        """
        self.value= value
        if self.value == '':
            return 0
        else:
            return self.value
    
    
    def addModelParameter(self,schematicInfo):
        """
        This function add the Ngspice Model details to schematicInfo
        """
        
        #Create object of TrackWidget
        self.obj_track = TrackWidget.TrackWidget()
        
        #List to store model line
        addmodelLine = []
        modelParamValue = []
        
        for line in self.obj_track.modelTrack:
            #print "Model Track :",line
            if line[2] == 'transfo':
                try:
                    start=line[5]
                    end=line[6]
                    num_turns=str(self.obj_track.model_entry_var[start].text())
                    if num_turns=="": num_turns="310"    
                    h_array= "H_array = [ "
                    b_array = "B_array = [ "
                    h1=str(self.obj_track.model_entry_var[start+1].text())
                    b1=str(self.obj_track.model_entry_var[start+2].text())
                    if len(h1)!=0 and len(b1)!=0:
                        h_array=h_array+h1+" "
                        b_array=b_array+b1+" "
                        bh_array = h_array+" ] " + b_array+" ]"
                    else:
                        bh_array = "H_array = [-1000 -500 -375 -250 -188 -125 -63 0 63 125 188 250 375 500 1000] B_array = [-3.13e-3 -2.63e-3 -2.33e-3 -1.93e-3 -1.5e-3 -6.25e-4 -2.5e-4 0 2.5e-4 6.25e-4 1.5e-3 1.93e-3 2.33e-3 2.63e-3 3.13e-3]"
                    area=str(self.obj_track.model_entry_var[start+3].text())
                    length=str(self.obj_track.model_entry_var[start+4].text())
                    if area=="": area="1"
                    if length=="":length="0.01"
                    num_turns2=str(self.obj_track.model_entry_var[start+5].text())
                    if num_turns2=="": num_turns2="620"
                    addmodelLine=".model "+line[3]+"_primary lcouple (num_turns= "+num_turns+")"
                    modelParamValue.append([line[0],addmodelLine,line[4]])
                    addmodelLine=".model "+line[3]+"_iron_core core ("+bh_array+" area = "+area+" length ="+length +")"
                    modelParamValue.append([line[0],addmodelLine,line[4]])
                    addmodelLine=".model "+line[3]+"_secondary lcouple (num_turns ="+num_turns2+ ")"    
                    modelParamValue.append([line[0],addmodelLine,line[4]])    
                except Exception as e:
                    print "Caught an exception in transfo model ",line[1]
                    print "Exception Message : ",str(e)
                    
            elif line[2] == 'ic':
                try:
                    start=line[5]
                    end=line[6]
                    for key,value in line[9].iteritems():
                        initVal = str(self.obj_track.model_entry_var[value].text())
                        if initVal=="":initVal="0"
                        node = line[1].split()[1] #Extracting node from model line
                        addmodelLine = ".ic v("+node+")="+initVal
                        modelParamValue.append([line[0],addmodelLine,line[4]])
                except Exception as e:
                    print "Caught an exception in initial condition ",line[1]
                    print "Exception Message : ",str(e)
                
            
            else:
                try:
                    start = line[5]
                    end = line[6]
                    addmodelLine=".model "+ line[3]+" "+line[2]+"("
                    for key,value in line[9].iteritems():
                        #print "Tags: ",key
                        #print "Value: ",value
                        #Checking for default value and accordingly assign param and default.
                        if ':' in key:
                            key = key.split(':')
                            param = key[0]
                            default = key[1]
                        else:
                            param = key
                            default = 0
                        #Cheking if value is iterable.its for vector
                        if hasattr(value, '__iter__'):
                            addmodelLine += param+"=["
                            for lineVar in value:
                                if  str(self.obj_track.model_entry_var[lineVar].text()) == "":
                                    paramVal = default
                                else:
                                    paramVal = str(self.obj_track.model_entry_var[lineVar].text())
                                addmodelLine += paramVal+" "
                            addmodelLine += "] "
                        else:
                            if  str(self.obj_track.model_entry_var[value].text()) == "":
                                paramVal = default
                            else:
                                paramVal = str(self.obj_track.model_entry_var[value].text())
                            
                            addmodelLine += param+"="+paramVal+" "
                                    
                                                             
                    addmodelLine += ") "
                    modelParamValue.append([line[0],addmodelLine,line[4]]) 
                except Exception as e:
                    print "Caught an exception in model ",line[1]
                    print "Exception Message : ",str(e)        
        
        
        #Adding it to schematic
        for item in modelParamValue:
            if ".ic" in item[1]:
                schematicInfo.insert(0,item[1])
                schematicInfo.insert(0,item[2])
            else:
                schematicInfo.append(item[2]) #Adding Comment
                schematicInfo.append(item[1]) #Adding model line
            
        print "MYSCH------->",schematicInfo    
        return schematicInfo
    
    def addDeviceLibrary(self,schematicInfo,kicadFile):
        """
        This function add the library details to schematicInfo
        """
        print "Adding Device library to Schematic info file"
        
        (projpath,filename) = os.path.split(kicadFile)
        
        print "Project Path",projpath
                
        deviceLibList = self.obj_track.deviceModelTrack
        deviceLine = {} #Key:Index, Value:with its updated line in the form of list 
        includeLine = [] #All .include line list
        
        if not deviceLibList:
            print "No Library Added in the schematic"
            pass
        else:
            for eachline in schematicInfo:
                words = eachline.split()
                if words[0] in deviceLibList:
                    print "Found Library line"
                    index = schematicInfo.index(eachline)
                    completeLibPath = deviceLibList[words[0]]
                    (libpath,libname) = os.path.split(completeLibPath)
                    print "Library Path :",libpath                                      
                    #Copying library from devicemodelLibrary to Project Path
                    #Special case for MOSFET
                    if eachline[0] == 'm':
                        #For mosfet library name come along with MOSFET dimension information
                        tempStr = libname.split(':')
                        libname = tempStr[0]
                        dimension = tempStr[1]
                        #Replace last word with library name
                        #words[-1] = libname.split('.')[0]
                        words[-1] = self.getRefrenceName(libname,libpath)
                        #Appending Dimension of MOSFET
                        words.append(dimension)
                        deviceLine[index] = words                    
                        includeLine.append(".include "+libname)
                        
                        #src = completeLibPath.split(':')[0] # <----- Not working in Windows
                        
                        (src_path,src_lib) = os.path.split(completeLibPath)
                        src_lib = src_lib.split(':')[0]
                        src = os.path.join(src_path,src_lib)
                        dst = projpath
                        shutil.copy2(src, dst)
                    else:
                        #Replace last word with library name
                        #words[-1] = libname.split('.')[0]
                        words[-1] = self.getRefrenceName(libname,libpath)
                        deviceLine[index] = words                    
                        includeLine.append(".include "+libname)
                        
                        src = completeLibPath
                        dst = projpath
                        shutil.copy2(src,dst)
                    
                else:
                    pass
            
            
            #Adding device line to schematicInfo
            for index,value in deviceLine.iteritems():
                #Update the device line
                strLine = " ".join(str(item) for item in value)
                schematicInfo[index] = strLine
            
            #This has to be second i.e after deviceLine details
            #Adding .include line to Schematic Info at the start of line
            for item in list(set(includeLine)):
                schematicInfo.insert(0,item)
        
                            
        return schematicInfo
    
    def addSubcircuit(self,schematicInfo,kicadFile):
        """
        This function add the subcircuit to schematicInfo
        """
        print "Adding Subcircuit to Schematic info file"
        
        (projpath,filename) = os.path.split(kicadFile)
                
        subList = self.obj_track.subcircuitTrack
        subLine = {} #Key:Index, Value:with its updated line in the form of list 
        includeLine = [] #All .include line list
        print "self.obj_track.subcircuitList--->",self.obj_track.subcircuitList
        print "self.obj_track.subcircuitTrack--->",self.obj_track.subcircuitTrack
        if len(self.obj_track.subcircuitList) != len(self.obj_track.subcircuitTrack):
            self.msg = QtGui.QErrorMessage()
            self.msg.showMessage("Conversion failed. Please add all Subcircuits.")
            self.msg.setWindowTitle("Error Message")
            self.msg.show()
            raise Exception('All subcircuit directories need to be specified.')
        elif not subList:
            print "No Subcircuit Added in the schematic"
            pass
        else:
            for eachline in schematicInfo:
                words = eachline.split()
                if words[0] in subList:
                    print "Found Subcircuit line"
                    index = schematicInfo.index(eachline)
                    completeSubPath = subList[words[0]]
                    (subpath,subname) = os.path.split(completeSubPath)
                    print "Library Path :",subpath                                      
                    #Copying library from devicemodelLibrary to Project Path
                
                    #Replace last word with library name
                    words[-1] = subname.split('.')[0]
                    subLine[index] = words                    
                    includeLine.append(".include "+subname+".sub")
                    
                    src = completeSubPath
                    dst = projpath
                    print os.listdir(src)
                    for files in os.listdir(src):
                        if os.path.isfile(os.path.join(src,files)):
                            if files != "analysis":
                                shutil.copy2(os.path.join(src,files),dst)
                else:
                    pass
            
            
            #Adding subcircuit line to schematicInfo
            for index,value in subLine.iteritems():
                #Update the subcircuit line
                strLine = " ".join(str(item) for item in value)
                schematicInfo[index] = strLine
            
            #This has to be second i.e after subcircuitLine details
            #Adding .include line to Schematic Info at the start of line
            for item in list(set(includeLine)):
                schematicInfo.insert(0,item)
                    
        return schematicInfo   
    
    def getRefrenceName(self,libname,libpath):
        libname = libname.replace('.lib','.xml')
        library = os.path.join(libpath,libname)
                
        #Extracting Value from XML
        libtree = ET.parse(library)
        for child in libtree.iter():
            if child.tag == 'ref_model':
                retVal = child.text
            else:
                pass
        return retVal