+ +eSim Manual + + + + + + + + + +

eSim

-An open source EDA tool for circuit design, -simulation, analysis and PCB design
- -eSim User Manual
-version 1.0.0
-Prepared By:
-eSim Team
-FOSSEE at IIT,Bombay -

-Indian Institute of Technology Bombay
- ○BY: $○$\$ ○BY: $○$\$
-August 2015

- 1 1 Introduction -
2 2 Installing eSim -
3 3 Architecture of eSim -
3.1 3.1 Modules used in eSim -
  3.1.1   3.1.1 Eeschema -
  3.1.2   3.1.2 CvPcb -
  3.1.3   3.1.3 Pcbnew -
  3.1.4   3.1.4 KiCad to Ngspice converter -
  3.1.5   3.1.5 Model Builder -
  3.1.6   3.1.6 Subcircuit Builder -
  3.1.7   3.1.7 Ngspice -
3.2 3.2 Work flow of eSim -
4 4 Getting Started -
4.1 4.1 eSim Main Window -
  4.1.1   4.1.1 How to launch eSim in Ubuntu? -
  4.1.2   4.1.2 Main-GUI -
5 5 Schematic Creation -
5.1 5.1 Familiarizing the Schematic Editor interface -
  5.1.1   5.1.1 Top menu bar -
  5.1.2   5.1.2 Top toolbar -
  5.1.3   5.1.3 Toolbar on the right -
  5.1.4   5.1.4 Toolbar on the left -
  5.1.5   5.1.5 Hotkeys -
5.2 5.2 Schematic creation for simulation -
  5.2.1   5.2.1 Selection and placement of components -
  5.2.2   5.2.2 Wiring the circuit -
  5.2.3   5.2.3 Assigning values to components -
  5.2.4   5.2.4 Annotation and ERC -
  5.2.5   5.2.5 Netlist generation -
6 6 PCB Design -
6.1 6.1 Schematic creation for PCB design -
  6.1.1   6.1.1 Netlist generation for PCB -
  6.1.2   6.1.2 Mapping of components using Footprint Editor -
  6.1.3   6.1.3 Familiarising the Footprint Editor tool -
  6.1.4   6.1.4 Viewing footprints in 2D and 3D -
  6.1.5   6.1.5 Mapping of components in the RC circuit -
6.2 6.2 Creation of PCB layout -
  6.2.1   6.2.1 Familiarizing the Layout Editor tool -
  6.2.2   6.2.2 Hotkeys -
  6.2.3   6.2.3 PCB design example using RC circuit -
7 7 Model Editor -
7.1 7.1 Creating New Model Library -
7.2 7.2 Editing Current Model Library -
7.3 7.3 Uploading external .lib file to eSim repository -
8 8 SubCircuit Builder -
8.1 8.1 Creating a SubCircuit -
8.2 8.2 Edit a Subcircuit -
9 9 Solved Examples -
9.1 9.1 Solved Examples -
  9.1.1   9.1.1 Basic RC Circuit -
  9.1.2   9.1.2 Half Wave Rectifier -
  9.1.3   9.1.3 Precision Rectifier -
  9.1.4   9.1.4 Inverting Amplifier -
  9.1.5   9.1.5 Half Adder Example -
References

Chapter 1
Chapter 1
Introduction

Electronic systems are an integral part of human life. They have simplified our lives to a great extent. Starting from small systems made of a few discrete components to the present day integrated circuits (ICs) with millions of logic gates, electronic systems have undergone a sea change. As a result, design of electronic systems too have become extremely difficult and time consuming. Thanks to a host of computer aided design tools, we have been able to come up with quick -and efficient designs. These are called Electronic Design Automation or Electronic Design Automation or EDA -tools. -

Let us see the steps involved in EDA.

Let us see the steps involved in EDA. In the first stage, the specifications of the system are laid out. These specifications are then converted to a design. The design could be in the form of a circuit schematic, logical description using an HDL language, etc. @@ -185,37 +185,37 @@ The design is then simulated and re-designed, if needed, to achieve the desired results. Once simulation achieves the specifications, the design is either converted to a PCB, a chip layout, or ported to an FPGA. The final product is again tested for specifications. The whole cycle is repeated until desired results are obtained - [ [9].

A person who builds an electronic system has to first design the circuit, produce a virtual representation of it through a schematic for easy comprehension, simulate it and finally -convert it into a Printed Circuit Board (PCB). There are various tools available that will help -us do this. Some of the popular EDA tools are those of Cadence, Synopys, Cadence, Synopys, Mentor Graphics -and Xilinx. Although these are fairly comprehensive and high end, their licenses are expensive, being proprietary. -

There are some free and open source EDA tools like gEDA, KiCad and

There are some free and open source EDA tools like gEDA, KiCad and Ngspice. The main drawback of these open source tools is that they are not comprehensive. Some of them are -capable of PCB design (e.g. KiCad) while some of them are capable of performing simulations -(e.g. gEDA). To the best of our knowledge, there is no open source software that can perform circuit design, simulation and layout design together. eSim is capable of doing all of the above. -

eSim is a free and open source EDA tool. It is an acronym for Electronics

eSim is a free and open source EDA tool. It is an acronym for Electronics Simulation. -eSim is created using open source software packages, such as KiCad, Ngspice and Python. -Using eSim, one can create circuit schematics, perform simulations and design PCB layouts. It can create or edit new device models, and create or edit subcircuits for simulation. @@ -224,127 +224,127 @@ professionals who would want to study and/or design electronic systems. eSim is for entrepreneurs and small scale enterprises who do not have the capability to invest in heavily priced proprietary tools.

This book introduces eSim to the reader and illustrates all the features of eSim with -examples. Chapter 2 gives step by step instructions to install eSim on a typical computer system and to validate the installation. The software architecture of eSim is presented in -Chapter 3. Chapter 3. Chapter 4 gets the user started with eSim. It takes them through a tour of eSim with the help of a simple RC circuit example. Chapter 5 illustrates how to simulate circuits. Chapter 6 explains PCB design using eSim, in detail. The advanced features of eSim such as Model Builder covered in Chapter 7 and Sub -circuiting is covered in Chapter 8. Chapter 9 illustrates how to use eSim for solving problems.

The following convention has been adopted throughout this manual.All the menu names, options under each menu item, tool names, certain points to be noted, -etc., are given in italics. Some keywords, names of certain windows/dialog boxes, names of some files/projects/folders, messages displayed during an activity, names -of websites, component references, etc., are given in typewriter font. Some key -presses, e.g. Enter key, F1 key, y for yes, etc., are also mentioned in Enter key, F1 key, y for yes, etc., are also mentioned in typewriter font. -

Chapter 2
Chapter 2
Installing eSim

- 1.

eSim installation in Ubuntu:

eSim installation in Ubuntu:
After downloading the zip file from https://github.com/FOSSEE/eSim to a local - directory unpack it using:
$ unzip eSim.zip
$ unzip eSim.zip
Now change directories in to the top-level source directory (where this INSTALL file can be found). -

To install eSim and other dependecies run the following command.
$ ../install-linux.sh –install

To install eSim and other dependecies run the following command.
$ ../install-linux.sh –install
Above script will install eSim along with dependencies.

eSim will be installed to /opt/eSim -

To run eSim you can directly run it from terminal as
$ esim

To run eSim you can directly run it from terminal as
$ esim
or you can double click on eSim icon created on desktop after installation.

Chapter 3
Chapter 3
Architecture of eSim

eSim is a CAD

eSim is a CAD tool that helps electronic system designers to design, test and analyse their circuits. But the important feature of this tool is that it is open source and hence the user can modify the source as per his/her need. The software provides a generic, modular and extensible platform for experiment with electronic circuits. This software runs on all -Ubuntu Linux distributions and some flavours of Windows. It uses Python, Python, KiCad and -Ngspice.

The objective behind the development of eSim is to provide an open source EDA solution for electronics and electrical engineers. The software should be capable of performing schematic creation, PCB design and circuit simulation (analog, digital and mixed signal). It should provide facilities to create new models and components. The architecture of eSim has been designed by keeping these objectives in mind. -

3.1 3.1 Modules used in eSim

Various open-source tools have been used for the underlying build-up of eSim. In this section we will give a brief idea about all the modules used in eSim.

3.1.1 3.1.1 Eeschema

- -

Eeschema is an integrated software where all functions of circuit drawing, control, layout, library management and access to the PCB design software are carried out. It is the -schematic editor tool used in KiCad [ [11]. Eeschema is intended to work with PCB layout software such as Pcbnew. It provides netlist that describes the electrical connections of the PCB. Eeschema also integrates a component editor which allows the creation, editing and visualization of components. It also allows the user to effectively handle the symbol libraries i.e; import, export, addition and deletion of library components. Eeschema also integrates the following additional but essential functions needed for a modern -schematic capture software: 1. Design rules check (1. Design rules check (DRC) for the automatic control of -incorrect connections and inputs of components left unconnected. 2. Generation of -layout files in POSTSCRIPT or HPGL format. POSTSCRIPT or HPGL format. 3. Generation of layout files printable via -printer. 4. Bill of material generation. 4. Bill of material generation. 5. Netlist generation for PCB layout or for simulation. -This module is indicated by the label 1 in Fig. 3.1.

As Eeschema is originally intended for PCB Design, there are no fictitious -components¹ ¹ such as voltage or current sources. Thus, we have added a new library for different types of voltage and current sources such as sine, pulse and square wave. We have also built a library which gives printing and plotting solutions. This extension, developed by us for eSim, is -indicated by the label 2 in Fig. 3.1. -

3.1.2 3.1.2 CvPcb

CvPcb is a tool that allows the user to associate components in the schematic to component footprints when designing the printed circuit board. CvPcb is the footprint editor tool in -KiCad [ [11]. Typically the netlist file generated by Eeschema does not specify which printed circuit board footprint is associated with each component in the schematic. However, this is not always the case as component footprints can be associated during schematic capture by @@ -358,15 +358,15 @@ and less error prone than directly associating footprints in the schematic edito This is because CvPcb not only allows automatic association, but also allows to see the list of available footprints and displays them on the screen to ensure the correct footprint is being associated. This module is indicated by the label 3 in -Fig. 3.1.

3.1.3 3.1.3 Pcbnew

Pcbnew is a powerful printed circuit board software tool. It is the layout editor tool -used in KiCad [ [11]. It is used in association with the schematic capture software Eeschema, which provides the netlist. Netlist describes the electrical connections of the circuit. CvPcb is used to assign each component, in the netlist produced by @@ -375,7 +375,7 @@ below:

It manages libraries of modules. Each module is a drawing of the physical - component including its footprint - the layout of pads providing connections to the component. The required modules are automatically loaded during the reading of the netlist produced by CvPcb. @@ -389,7 +389,7 @@ below: connected on the schematic. These connections move dynamically as track and module movements are made.
It has an active Design Rules Check (It has an active Design Rules Check (DRC) which automatically indicates any error of track layout in real time.
It has a simple but effective auto router to assist in the production of the - circuit. An export/import in SPECCTRA dsn format allows to use more advanced auto-routers.
display the track/pad clearance.

This module is indicated by the label 4 in Fig.

This module is indicated by the label 4 in Fig. 3.1. -

3.1.4 3.1.4 KiCad to Ngspice converter

We can provide analysis parameters, and the source details through this module. It also allows us to add and edit the device models and subcircuits, included in the circuit schematic. Finally, this module facilitates the conversion of KiCad netlist to Ngspice compatible ones. It is developed by us for eSim and it is indicated by the label 7 in -Fig. 3.1.

3.1.5 3.1.5 Model Builder

- -

This tool provides the facility to define a new model for devices such as, 1. Diode

This tool provides the facility to define a new model for devices such as, 1. Diode 2. Bipolar -Junction Transistor (BJT) 3. Metal Oxide Semiconductor Field Effect Transistor -(MOSFET) 4. Junction Field Effect Transistor (JFET) 5. IGBT and 4. Junction Field Effect Transistor (JFET) 5. IGBT and 6. Magnetic core. This module also helps edit existing models. It is developed by us for eSim and it is indicated -by the label 5 in Fig. 3.1.

3.1.6 3.1.6 Subcircuit Builder

This module allows the user to create a subcircuit for a component. Once the subcircuit for a component is created, the user can use it in other circuits. It has the facility to define new components such as, Op-amps and IC-555. This component also helps edit existing subcircuits. This module is developed by us for eSim and it is indicated by the label 6 in -Fig. 3.1.

3.1.7 3.1.7 Ngspice

Ngspice is a general purpose circuit simulation program for nonlinear dc, nonlinear transient, -and linear ac analysis [ [12]. Circuits may contain resistors, capacitors, inductors, mutual inductors, independent voltage and current sources, four types of dependent sources, lossless and lossy transmission lines (two separate implementations), switches, uniform distributed RC lines, and the five most common semiconductor devices: diodes, -BJTs, JFETs, MESFETs, and MOSFET. BJTs, JFETs, MESFETs, and MOSFET. This module is indicated by the label 9 in -Fig. 3.1.

3.2 3.2 Work flow of eSim

Fig.

Fig. 3.1 shows the work flow in eSim. The block diagram consists of mainly three parts:

PCB Layout Editor
Circuit Simulators

- -

Figure 3.1:

Figure 3.1: Work flow in eSim. (Boxes with dotted lines denote the modules developed in this work).

@@ -502,7 +502,7 @@ in this work).

first step in the design of an electronic circuit. Generally a circuit diagram is drawn on a paper, and then entered into a computer using a schematic editor. Eeschema is the schematic editor for eSim. Thus all the functionalities of Eeschema are naturally available in eSim. -

Libraries for components, explicitly or implicitly supported by Ngspice, have been created using the features of Eeschema. As Eeschema is originally intended for PCB design, there are @@ -528,7 +528,7 @@ type of simulation to be performed and the corresponding options are provided through a graphical user interface (GUI). This is called KiCad to Ngspice Converter in eSim.

eSim uses Ngspice for analog, digital, mixed-level/mixed-signal circuit simulation. Ngspice -is based on three open source software packages [ [14]:

Spice3f5 (analog circuit simulator) @@ -537,130 +537,130 @@ href="#Xspice">14]:
Xspice (code modeling support and simulation of digital components through an event driven algorithm)

It is a part of gEDA project. Ngspice is capable of simulating devices with BSIM, EKV, HICUM,

It is a part of gEDA project. Ngspice is capable of simulating devices with BSIM, EKV, HICUM, -HiSim, PSP, and PTM PSP, and PTM models. It is widely used due to its accuracy even for the latest technology devices. -

Chapter 4
Chapter 4
Getting Started

In this chapter we will get started with eSim. We will run through the various options available with an example circuit. Referring to this chapter will make one familiar with eSim and will help plan the project before actually designing a circuit. Lets get started. -

4.1 4.1 eSim Main Window

4.1.1 4.1.1 How to launch eSim in Ubuntu?

After installation is completed, to launch eSim 1. Go to terminal.
2. Type esim and hit enter.
The first window that appears is workspace dialog as shown in Fig. 4.1.

- -

Figure 4.1:

Figure 4.1: eSim-Workspace

The default workspace is eSim-Workspace under home directory. To create new workspace -use browse option. -

4.1.2 4.1.2 Main-GUI

The main GUI window of eSim is as shown in Fig. 4.2

- -

Figure 4.2:

Figure 4.2: eSim Main GUI

The eSim main window consists of the following symbols.

- 1.: Toolbar
- 2.: Menubar
- 3.: Project explorer
- 4.: Dockarea
- 5.: Console area

Toolbar

- -

Figure 4.3:

Figure 4.3: Toolbar

Open Schematic: The first tool on the toolbar i.e. Schematic EditorOpen Schematic: The first tool on the toolbar i.e. Schematic Editor . Clicking on this button will open Eeschema, the KiCad schematic editor.
Convert KiCad to Ngspice: This converter converts KiCad spice netlist into Ngspice compatible netlist. The KiCad to Ngspice window consists of total five - tabs as namely Analysis, Device Model, Source Details, Model Library, Subcircuits. - Once the values have been entered, press the Convert key. It will generate - .cir.out file in the same project directory.
Note that .cir.out file in the same project directory.
Note that KiCad to Ngspice Converter can only be used if current project has - created the KiCad spice netlist file .cir.
.cir.
-
The details of tabs under KiCad to Ngspice converter are as follows:
The details of tabs under KiCad to Ngspice converter are as follows:
-
Analysis

This feature helps the user to perform different types of analysis such as Operating - point analysis, DC analysis, AC analysis, transient analysis. DC analysis, AC analysis, transient analysis. It has the facility to
- Insert values for analysis
-
Source Details
-
eSim sources are added from eSim_Sources library. Source such as
eSim sources are added from eSim_Sources library. Source such as SINE, AC, DC, - PULSE are in this library. The parameter values to all the sources added in the shcematic can be given through ’Source Details’.
-
Ngspice Model
-
Ngspice has in built model such as
Ngspice has in built model such as flipflop(D,SR,JK,T),gain,summer etc. which can be utilised while building a circuit. eSim allows to add and modify Ngspice model parameter through Ngspice Model tab.
-
Device Modeling
-
Devices like
Devices like Diode, JFET, MOSFET, IGBT, MOS etc used in the circuit can be modeled using device model libraries. eSim also provides editing and adding new model libraries. While converting KiCad to Ngspice, these library files are added to the corresponding devices used in the circuit.
-
Subcircuits

Subcircuits are circuits within circuit. Subcircuiting helps to reuse the parts of the circuits. The subcircuits in the main circuits are added using this facility. Also, eSim provides us with the facility to edit already existing subcircuits.
Simulation: The netlist generated using the Simulation: The netlist generated using the KiCad to Ngspice converter is - simulated using simulation button. Clicking on the Simulation button will run the Ngspice simulation for current project. Python plotting window will open, as - shown in Fig. 4.4. It shows the output waveform of current project. In the - Ngspice tab we can view the output plotted by Ngspice.

-

Figure 4.4:
Figure 4.4: Simulation Output in Python Plotting Window
Foot Print Editor: Clicking on the Footprint Editor tool will open the Foot Print Editor: Clicking on the Footprint Editor tool will open the CvPcb - window. This window will ideally open the .net file for the current project. So, before using this tool, one should have the netlist for PCB design (a .net file).
PCB Layout: Clicking on the Layout Editor tool will open PcbnewPCB Layout: Clicking on the Layout Editor tool will open Pcbnew , the layout editor used in eSim. In this window, one will create the PCB. It involves laying tracks and vias, performing optimum routing of tracks, creating one or more - copper layers for PCB, etc. It will be saved as a .brd file in the current project directory.

Subcircuit Builder

Menubar

New Project: New projects are created in the eSim-workspace. When this - menu is selected, a new window opens up with Enter Project name field. Type the name of the new project and click on OK. A project directory will be created in eSim-Workspace. The name of this folder will be the same as @@ -767,300 +767,300 @@ class="cmtt-10x-x-109">Enter Project name field.
Help: It opens user manual in the dockarea.

Project Explorer

Project explorer has tree of all the project previously added in it. On right clicking the project we can simply remove or refresh the project in the explorer. Also on double/right clicking, the project file can be opened in the text editor which can then be edited.

Dockarea

This area is used to open the following windows.

- 1.: KiCad to Ngspice converter
- 2.: Ngspice plotting
- 3.: Python plotting
- 4.: Model builder
- 5.: Subcircuit builder

Console Area

Console area provides information about the activity done in current project.

Chapter 5
Chapter 5
Schematic Creation

The first step in the design of an electronic system is the -design of its circuit. This circuit is usually created using a Schematic EditorSchematic Editor and is called a -Schematic. eSim uses Eeschema Schematic. eSim uses Eeschema as its schematic editor. Eeschema is the schematic editor of -KiCad. It is a powerful schematic editor software. It allows the creation and modification of components and symbol libraries and supports multiple hierarchical layers of printed circuit design. -

5.1 5.1 Familiarizing the Schematic Editor interface

Fig.

Fig. 5.1 shows the schematic editor and the various menu and toolbars. We will explain them -briefly in this section.

- -

Figure 5.1:

Figure 5.1: Schematic editor with the menu bar and toolbars marked

5.1.1 5.1.1 Top menu bar

The top menu bar will be available at the top left corner. Some of the important menu options in the top menu bar are:

- 1.

File - The file menu items are given below:

- (a): New - Clear current schematic and start a new one
- (b): Open - Open a schematic
- (c): Open Recent - A list of recently opened files for loading
- (d): Save Whole Schematic project - Save current sheet and all its hierarchy.
- (e): Save Current Sheet Only - Save current sheet, but not others in a hierarchy.
- (f): Save Current sheet as - Save current sheet with a new name.
- (g): Print - Access to print menu (See Fig.; Print - Access to print menu (See Fig. 5.2).
- (h): Plot - Plot the schematic in Postscript, HPGL, SVF or DXF format
- (i): Quit - Quit the schematic editor.

Figure 5.2:

Figure 5.2: Print options

- 2.

Place - The place menu has shortcuts for placing various items like components, wire - and junction, on to the schematic editor window. See Sec. 5.1.5 to know more about various shortcut keys (hotkeys).

- 3.

Preferences - The preferences menu has the following options:

- (a): Library - Select libraries and library paths
- (b): Colors - Select colors for various items.
- (c): Options - Display schematic editor options (Units, Grid size).
- (d): Language - Shows the current list of translations. Use default.
- (e): Hotkeys - Access to the hot keys menu. See Sec.; Hotkeys - Access to the hot keys menu. See Sec. 5.1.5 about hotkeys.
- (f): Read preferences - Read configuration file.
- (g): Save preferences - Save configuration file.

5.1.2 5.1.2 Top toolbar

- -

Some of the important tools in the top toolbar are discussed below. They are marked in -Fig. 5.3.

5.3.

- -

Figure 5.3:

Figure 5.3: Toolbar on top with important tools marked

- 1.: Save - Save the current schematic
- 2.: Library Editor - Create or edit components.
- 3.: Library Browser - Browse through the various component libraries available
- 4.: Navigate schematic hierarchy - Navigate among the root and sub-sheets in the hierarchy
- 5.: Print - Print the schematic
- 6.: Generate netlist - Generate a netlist for PCB design or for simulation.
- 7.: Annotate - Annotate the schematic
- 8.: Check ERC - Do Electric Rules Check for the schematic
- 9.: Create BOM - Create a Bill of Materials of the schematic

5.1.3 5.1.3 Toolbar on the right

- -

The toolbar on the right side of the schematic editor window has many important tools. Some -of them are marked in Fig. 5.4.

5.4.

- -

Figure 5.4:

Figure 5.4: Toolbar on right with important tools marked

Let us now look at each of these tools and their uses.

- 1.: Place a component - Load a component to the schematic. See Sec.; Place a component - Load a component to the schematic. See Sec. 5.2.1 for more details.
- 2.: Place a power port - Load a power port (Vcc, ground) to the schematic
- 3.: Place wire - Draw wires to connect components in schematic
- 4.: Place bus - Place a bus on the schematic
- 5.: Place a no connect - Place a no connect flag, particularly useful in ICs
- 6.: Place a local label - Place a label or node name which is local to the schematic
- 7.: Place a global label - Place a global label (these are connected across all schematic diagrams in the hierarchy)
- 8.: Place a text or comment - Place a text or comment in the schematic

5.1.4 5.1.4 Toolbar on the left

- -

Some of the important tools in the toolbar on the left are discussed below. They are marked -in Fig. 5.5.

5.5.

- -

Figure 5.5:

Figure 5.5: Toolbar on left with important tools marked

- 1.: Show/Hide grid - Show or Hide the grid in the schematic editor. Pressing the tool again hides (shows) the grid if it was shown (hidden) earlier.
- 2.: Show hidden pins - Show hidden pins of certain components, for example, power pins of certain ICs.

5.1.5 5.1.5 Hotkeys

A set of keyboard keys are associated with various operations in the schematic editor. These keys save time and make it easy to switch from one operation to another. The list of hotkeys -can be viewed by going to Preferences in the top menu bar. Choose Hotkeys and -select List current keys. The hotkeys can also be edited by selecting the option -Edit Hotkeys. Some frequently used hotkeys, along with their functions, are given below:

T - Add text
S - Add sheet

Note: Both lower and upper-case keys will work as hotkeys.

5.2 5.2 Schematic creation for simulation

There are certain differences between the schematic created for simulation and that created for PCB design. We need certain components like plots and current sources. For simulation @@ -1108,1436 +1108,1436 @@ whereas these are not needed for PCB design. For PCB design, we would require co these have no meaning in simulation. This section covers schematic creation for simulation.

The first step in the creation of circuit schematic is the selection and placement of -required components. The components are grouped under eSim-libraries as shown in Fig. 5.6. -

- -

Figure 5.6:

Figure 5.6: eSim-Components Libraries

5.2.1 5.2.1 Selection and placement of components

We would need a resistor, a capacitor, a voltage source, ground terminal. To place a resistor -on the schematic editor window, select the Place a component tool from the toolbar on the right side and click anywhere on the schematic editor. This opens up the -component selection window. Resistor component can be found under eSimeSim_Devices -library. Fig. 5.7 shows the selection of resistor component. Click on OK. A resistor will be tied to the cursor. Place the resistor on the schematic editor by a single click. -

- -

Figure 5.7:

Figure 5.7: Placing a resistor using the Place a Component tool

To place the next component, i.e., capacitor, click again on the schematic editor.Similarly, -Capacitor component is found under eSimeSim_Devices library. Click on OK. Place the capacitor on the schematic editor by a single click. Let us now place a sinusoidal voltage source. This is required for performing transient analysis. To place it, click again on the schematic editor. On -the component selection window, choose the library eSimeSim_source by double clicking on it. -Select the component SINE and click on OK. Place the sine source on the schematic editor by a single click. -

Place the component by clicking on the schematic editor. Similarly place

Place the component by clicking on the schematic editor. Similarly place gnd, a ground -terminal and power_flag under power_flag under power library. Once all the components are placed, the -schematic editor would look like the Fig. 5.8.

5.8.

- -

Figure 5.8:

Figure 5.8: All RC circuit components placed

Let us rotate the resistor to complete the circuit. To rotate the resistor, place the cursor -on the resistor and press the key R. Note that if the cursor is placed above the letter R. Note that if the cursor is placed above the letter R (not -R?) on the resistor, it asks to clarify selection. Choose the option R?) on the resistor, it asks to clarify selection. Choose the option Component R. This can be -avoided by placing the cursor slightly away from the letter R as shown in Fig. 5.9. This -applies to all components.

- -

Figure 5.9:

Figure 5.9: Placing the cursor (cross mark) slightly away from the letter R

If one wants to move a component, place the cursor on top of the component and press the -key M. The component will be tied to the cursor and can be moved in any direction. - -

5.2.2 5.2.2 Wiring the circuit

The next step is to wire the connections. Let us connect the resistor to the capacitor. To do so, point the cursor to the terminal of resistor to be connected and press -the key W. It has now changed to the wiring mode. Move the cursor towards the -terminal of the capacitor and click on it. A wire is formed as shown in Fig. 5.10a. -

- - -

-(a) -Initial -stages stages - (b) - Wiring - done done - (c) - Final - schematic - with - PWRPWR_FLAG -

Figure 5.10:

Figure 5.10: Various stages of wiring

Similarly connect the wires between all terminals and the final schematic would look like -Fig. 5.10b. -

5.2.3 5.2.3 Assigning values to components

We need to assign values to the components in our circuit i.e., resistor and capacitor. Note that the sine voltage source has been placed for simulation. The specifications of sine source will be given during simulation. To assign value to the resistor, place the cursor above the -letter R (not R?) and press the key E. Choose Field value. Type 1k in the R (not R?) and press the key E. Choose Field value. Type 1k in the Edit value field box -as shown in Fig. 5.11. 1k means 1kΩ. Similarly give the value 5.11. 1k means 1kΩ. Similarly give the value 1u for the capacitor. 1u means -1μF. -

- -

Figure 5.11:

Figure 5.11: Editing value of resistor

5.2.4 5.2.4 Annotation and ERC

- - - -

The next step is to annotate the schematic. Annotation gives unique references to the -components. To annotate the schematic, click on Annotate schematic tool from the -top toolbar. Click on annotation, then click on annotation, then click on OK and finally click on close as -shown in Fig. 5.13. The schematic is now annotated. The question marks next to component references have been replaced by unique numbers. If there are more than one instance of a component (say resistor), the annotation will be done as R1, R2, etc. -

Let us now do ERC or Electric Rules Check. To do so, click on

Let us now do ERC or Electric Rules Check. To do so, click on Perform electric rules -check tool from the top toolbar. Click on Test Erc button. The error as shown in Fig. check tool from the top toolbar. Click on Test Erc button. The error as shown in Fig. 5.12 -may be displayed. Click on close in the test erc window.

window.

- -

Figure 5.12:

Figure 5.12: ERC error

- -

Figure 5.13:

Figure 5.13: Steps in annotating a schematic: 1. First click on Annotation then 2. Click on Ok then 3. Click on close

There will be a green arrow pointing to the source of error in the schematic. Here it points -to the ground terminal. This is shown in Fig. 5.14.

5.14.

- -

Figure 5.14:

Figure 5.14: Green arrow pointing to Ground terminal indicating an ERC error

To correct this error, place a PWR_FLAG from the Eeschema library power.

To correct this error, place a PWR_FLAG from the Eeschema library power. Connect the -power flag to the ground terminal as shown in Fig. 5.10c. One needs to place PWR5.10c. One needs to place PWR_FLAG -wherever the error shown in Fig. 5.12 is obtained. Repeat the ERC. Now there are no errors. With this we have created the schematic for simulation. -

5.2.5 5.2.5 Netlist generation

To simulate the circuit that has been created in the previous section, we need to generate its -netlist. Netlist is a list of components in the schematic along with their connection -information. To do so, click on the To do so, click on the Generate netlist tool from the top toolbar. Click on spice -from the window that opens up. Check the option Default Format. Then click on Default Format. Then click on Generate. -This is shown in Fig. 5.15. Save the netlist. This will be a 5.15. Save the netlist. This will be a .cir file. Do not change the -directory while saving.

- -

Figure 5.15:

Figure 5.15: Steps in generating a Netlist for simulation: 1. Click on Spice then 2. -Check the option Default Format then 3. Click on Generate

Now the netlist is ready to be simulated. Refer to [15] or [

Now the netlist is ready to be simulated. Refer to [15] or [16] to know more about Eeschema. -

Chapter 6
PCB Design

Printed Circuit Board (PCB) Chapter 6
PCB Design Printed Circuit Board (PCB) design is an important step in electronic system design. Every component of the circuit needs to be placed and connections routed to minimise delay and area. Each component has an associated footprint. Footprint -refers to the physical layout of a component that is required to mount it on the PCB. PCB design involves associating footprints to all components, placing them appropriately to minimise wire length and area, connecting the footprints using tracks/vias and finally extracting the required files needed for printing the PCB. Let us see the steps to design PCB using eSim. -

6.1 6.1 Schematic creation for PCB design

In Chapter

In Chapter 9, we will see the differences between schematic for simulation and schematic for PCB design. Let us design the PCB for a RC circuit. A resistor, capacitor, ground, power flag and a connector are required. Connectors are used to take signals in and out of the PCB. -

Create the circuit schematic as shown in Fig. 6.1. The two pin connector (CONN

Create the circuit schematic as shown in Fig. 6.1. The two pin connector (CONN_2) can -be placed from the Eeschema library conn. Do the annotation and test for ERC. Refer to -Chapter 9 to know more about basic steps in schematic creation. -

- -

Figure 6.1:

Figure 6.1: Final circuit schematic for RC low pass circuit

6.1.1 6.1.1 Netlist generation for PCB

- -

The netlist for PCB is different from that for simulation. To generate netlist for PCB, click on -the Generate netlist tool from the top toolbar in Schematic editor. In the Netlist window, -under the tab Pcbnew, click on the button Netlist. This is shown in Fig. Pcbnew, click on the button Netlist. This is shown in Fig. 6.2. Click on -Save in the Save netlist file dialog box that opens up. Do not change the directory or the name of the netlist file. Save the schematic and close the schematic editor. -

- -

Figure 6.2:

Figure 6.2: Netlist generation for PCB

Note that the netlist for PCB has an extension .net

Note that the netlist for PCB has an extension .net. The netlist created for simulation -has an extension has an extension .cir. -

6.1.2 6.1.2 Mapping of components using Footprint Editor

- - -

Once the netlist for PCB is created, one needs to map each component in the netlist to a -footprint. The tool Footprint Editor is used for this. eSim uses Footprint Editor is used for this. eSim uses CvPcb as its footprint editor. -CvPcb is the footprint editor tool in KiCad. CvPcb is the footprint editor tool in KiCad.

6.1.3 6.1.3 Familiarising the Footprint Editor tool

- -

If one opens the Footprint Editor after creating the

If one opens the Footprint Editor after creating the .net netlist file, the Footprint editor as -shown in Fig. 6.3 will be obtained. The menu bar and toolbars and the panes are marked in this figure. The menu bar will be available in the top left corner. The left pane has a list of components in the netlist file and the right pane has a list of available footprints for each -component.

- -

Figure 6.3:

Figure 6.3: Footprint editor with the menu bar, toolbar, left pane and right pane marked

Note that if the Footprint Editor is opened before creating a ‘.net’ file, then the left and -right panes will be empty. -

Toolbar

Some of the important tools in the toolbar are shown in Fig.

Some of the important tools in the toolbar are shown in Fig. 6.4. They are explained below: -

- -

Figure 6.4:

Figure 6.4: Some important tools in the toolbar

- 1.: Save netlist and footprint files - Save the netlist and the footprints that are associated with it.
- 2.: View selected footprint - View the selected footprint in 2D. See Sec.; View selected footprint - View the selected footprint in 2D. See Sec. 6.1.4 for more details.
- 3.: Automatic footprint association - Perform footprint association for each component automatically. Footprints will be selected from the list of footprints available.
- 4.: Delete all associations - Delete all the footprint associations made
- 5.: Display filtered footprint list - Display a filtered list of footprints suitable to the selected component
- 6.: Display full footprint list - Display the list of all footprints available (without filtering)

6.1.4 6.1.4 Viewing footprints in 2D and 3D

- - -

To view a footprint in 2D, select it from the right pane and click on

To view a footprint in 2D, select it from the right pane and click on View selected footprint -from the menu bar. Let us view the footprint for SM1210. Choose SM1210 from -the right pane as shown in Fig. 6.5. On clicking the 6.5. On clicking the View selected footprint tool, -the Footprint window with the view in 2D will be displayed. Click on the Footprint window with the view in 2D will be displayed. Click on the 3D -tool in the Footprint window, as shown in Fig. Footprint window, as shown in Fig. 6.6. A top view of the selected footprint in 3D is obtained. Click on the footprint and rotate it using mouse to get 3D views from various angles. One such side view of the footprint in 3D is shown in -Fig. 6.7. -

- -

Figure 6.5:

Figure 6.5: Viewing footprint for SM1210: 1. Choose the footprint SM1210 from the -right pane, 2. Click on View selected footprint

- -

Figure 6.6: Footprint view in 2D. Click on

Figure 6.6: Footprint view in 2D. Click on 3D to get 3D view

- -

Figure 6.7:

Figure 6.7: Side view of the footprint in 3D

6.1.5 6.1.5 Mapping of components in the RC circuit

Click on C1 from the left pane. Choose the footprint

Click on C1 from the left pane. Choose the footprint C1 from the right pane by double -clicking on it. Click on connector P1 from the left pane. Choose the footprint P1 from the left pane. Choose the footprint SIL-2 from the -right pane by double clicking on it. Similarly choose the footprint R3 for the resistor R3 for the resistor R1. The -footprint mapping is shown in Fig. 6.8. Save the footprint association by clicking on the 6.8. Save the footprint association by clicking on the Save -netlist and footprint files tool from the CvPcb toolbar. The netlist and footprint files tool from the CvPcb toolbar. The Save Net and component List window appears. Browse to the directory where the schematic file for this project is saved and -click on Save. The netlist gets saved and the Save. The netlist gets saved and the Footprint Editor window closes automatically. -

- -

Figure 6.8:

Figure 6.8: Footprint mapping done

Note that one needs to browse to the directory where the schematic file is saved and save -the ‘.net’ file in the same directory. -

6.2 6.2 Creation of PCB layout

- -

The next step is to place the footprints and lay tracks between them to get the layout. This is -done using the Layout Editor tool. eSim uses Layout Editor tool. eSim uses Pcbnew, the layout creation tool in KiCad, as its layout editor.

6.2.1 6.2.1 Familiarizing the Layout Editor tool

- -

The layout editor with the various menu bar and toolbars is shown in Fig.

The layout editor with the various menu bar and toolbars is shown in Fig. 6.9. -

- -

Figure 6.9:

Figure 6.9: Layout editor with menu bar, toolbars and layer options marked

- -

Figure 6.10:

Figure 6.10: Top toolbar with important tools marked

Top toolbar

Some of the important menu options in the top menu bar are shown in Fig.

Some of the important menu options in the top menu bar are shown in Fig. 6.10. They are explained below:

- 1.: Save board - Save the printed circuit board
- 2.: Module editor - Open module editor to edit footprint modules or libraries
- 3.: Read netlist - Import the netlist whose layout needs to be created.
- 4.: Perform design rules check - Check for design rules, unconnected nets, etc., in the layout.
- 5.: Select working layer - Selection of working layer
- 6.: Show active layer selections and select layer pair for route and place - Select layer in top and bottom layers. It also shows the currently active layer selections.
- 7.: Mode footprint: Manual/automatic move and place - Move and place modules

6.2.2 6.2.2 Hotkeys

A list of hotkeys are given below:

- 1.: F1 - Zoom in
- 2.: F2 - Zoom out
- 3.: Delete - Delete Track or Footprint
- 4.: X - Add new track
- 5.: V - Add Via
- 6.: M - Move Item
- 7.: F - Flip Footprint
- 8.: R - Rotate Item
- 9.: G - Drag Footprint
- 10.: Ctrl+Z - Undo
- 11.: E - Edit Item

The list can be viewed by selecting Preferences from the top menu bar and choosing

The list can be viewed by selecting Preferences from the top menu bar and choosing List Current -Keys from the option Keys from the option Hotkeys.

6.2.3 6.2.3 PCB design example using RC circuit

- -

Click on Layout Editor from the eSim toolbar. Click on

Click on Layout Editor from the eSim toolbar. Click on Read Netlist tool from the top -toolbar. Click on Browse Netlist files on the Netlist window that opens up. Select the Browse Netlist files on the Netlist window that opens up. Select the .net file -that was modified after assigning footprints. Click on Open. Now Click on Open. Now Click on Read Current -Netlist on the Netlist window. The message area in the Netlist window says that -the RC_pcb.net has been read. The sequence of operations is shown in Fig. 6.11. -

- -

Figure 6.11:

Figure 6.11: Importing netlist file to layout editor: 1. Browse netlist Files, 2. Choose the RC_pcb.net file, 3. Read Netlist file, 4. Close

The footprint modules will now be imported to the top left hand corner of the layout -editor window. This is shown in Fig. 6.12.

6.12.

- -

Figure 6.12:

Figure 6.12: Footprint modules imported to top left corner of layout editor window

Zoom in to the top left corner by pressing the key

Zoom in to the top left corner by pressing the key F1 or using the scroll button of the -mouse. The zoomed in version of the imported netlist is shown in Fig. 6.13. -

Let us now place this in the center of the layout editor window.

- -

Figure 6.13:

Figure 6.13: Zoomed in version of the imported netlist

Click on

Click on Mode footprint: Manual/automatic move and place tool from the top toolbar. -Place the cursor near the center of the layout editor window. Right click and choose Glob -move and place. Choose move all modules. The sequence of operations is shown in Fig. move and place. Choose move all modules. The sequence of operations is shown in Fig. 6.14. -Click on Yes on the confirmation window to move the modules. Zoom in using the F1 key. -The current placement of components after zooming in is shown in Fig. 6.15a. -

- -

Figure 6.14:

Figure 6.14: Moving and placing modules to the center of layout editor. 1. Click on -Mode footprint: Manual/automatic move and place, 2. Place cursor at center of layout -editor and right click on it 3. Choose Glob Move and Place and then choose Glob Move and Place and then choose Move All -Modules.

- - -

-(a) -Zoomed -in -version -of the -current -placement -after -moving -modules -to the -center -of the -layout -editor editor - (b) - Final - placement - of - footprints - after - rotating - and - moving - P1 -

Figure 6.15:

Figure 6.15: Different stages of placement of modules on PCB

We need to arrange the modules properly to lay tracks. Rotate the connector P1 by placing the cursor on top of P1 and pressing R. Move it by placing the cursor on top of it and -pressing M. The final placement is shown in Fig. 6.15b. 6.15b. -

Let us now lay the tracks. Let us first change the track width. Click on

Let us now lay the tracks. Let us first change the track width. Click on Design rules from -the top menu bar. Click on Design rules. This is shown in Fig. 6.16. The Design rules. This is shown in Fig. 6.16. The Design Rules Editor window opens up. Here one can edit the various design rules. Double click on the track width -field to edit it. Type 0.8 and press Enter. Click on OK. Fig. Enter. Click on OK. Fig. 6.17 shows the sequence of -operations.

- -

Figure 6.16: Choose Design Rules from the top menu bar and

Figure 6.16: Choose Design Rules from the top menu bar and Design Rules again

- -

Figure 6.17: Changing the track width: 1. Double click on

Figure 6.17: Changing the track width: 1. Double click on Track Width field and type -0.8, 2. Click on OK

Click on Back from the Layer options as shown in Fig. 6.18.

- -

Figure 6.18: Choosing the copper layer

Figure 6.18: Choosing the copper layer Back

Let us now start laying the tracks. Place the cursor above the left terminal of R1 -in the layout editor window. Press the key x. Move the cursor down and double -click on the left terminal of C1. A track is formed. This is shown in Fig. 6.19a. -

- - -

-(a) A -track -formed -between -resistor -and -capacitor capacitor - (b) A - track - formed - between - capacitor - and - connector connector - (c) A - track - formed - between - connector - and - resistor -

Figure 6.19:

Figure 6.19: Different stages of laying tracks during PCB design

Similarly lay the track between capacitor C1 and connector P1 as shown in -Fig. 6.19b. The last track needs to be laid at an angle. To do so, place the cursor above the second terminal of R1. Press the key x and move the cursor diagonally down. Double click on the other terminal of the connector. The track will be laid -as shown in Fig. 6.19c. All tracks are now laid. The next step is to create PCB edges. -

Choose PCB_edges from the Layer options to add edges. Click on

Choose PCB_edges from the Layer options to add edges. Click on Add graphic line or -polygon from the toolbar on the left. Fig. polygon from the toolbar on the left. Fig. 6.20 shows the sequence of operations. Let us now -start drawing edges for PCB.

- -

Figure 6.20: Creating PCB edges: 1. Choose PCB_Edges from

Figure 6.20: Creating PCB edges: 1. Choose PCB_Edges from Layer options 2. Choose -Add graphic line or polygon from left toolbar

Click to the left of the layout. Move cursor horizontally to the right. Click once to change -orientation. Move cursor vertically down. Draw the edges as shown in Fig. 6.21. Double click -to finish drawing the edges.

- -

Figure 6.21:

Figure 6.21: PCB edges drawn

Click on

Click on Perform design rules check from the top toolbar to check for design rules. The -DRC Control window opens up. Click on Start DRC. There are no errors under the DRC Control window opens up. Click on Start DRC. There are no errors under the Error -messages tab. Click on OK to close DRC control window. Fig. messages tab. Click on OK to close DRC control window. Fig. 6.22 shows the sequence of -operations.

- -

Figure 6.22: Performing design rules check: 1. Click on Start DRC, 2. Click on

Figure 6.22: Performing design rules check: 1. Click on Start DRC, 2. Click on Ok

Click on

Click on Save board on the top toolbar. -

To generate Gerber files, click on File from the top menu bar. Click on

To generate Gerber files, click on File from the top menu bar. Click on Plot. This is shown -in Fig. 6.23. The plot window opens up. One can choose which layers to plot by -selecting/deselecting them from the Layers pane on the left side. One can also choose the -format used to plot them. Choose Gerber. The output directory of the plots created can also be chosen. By default, it is the project directory. Some more options can -be chosen in this window. Click on Plot. The message window shows the location -in which the Gerber files are created. Click on Close. This is shown in Fig. Close. This is shown in Fig. 6.24. -

- -

Figure 6.23: Choosing Plot from the

Figure 6.23: Choosing Plot from the File menu

- -

Figure 6.24: Creating Gerber files: 1. Choose

Figure 6.24: Creating Gerber files: 1. Choose Gerber as the plot format, 2. Click on -Plot. Message window shows location in which Gerber files are created, 3. Click on Plot. Message window shows location in which Gerber files are created, 3. Click on Close

The PCB design of RC circuit is now complete. To know more about Pcbnew, refer to - [15] or [ [15] or [16]. -

Chapter 7
Chapter 7
Model Editor

Spice based simulators include a feature which allows accurate modeling of semiconductor devices such as diodes, transistors etc. eSim Model Editor provides a facility to define a new -model for devices such as diodes, MOSFET, BJT, JFET, IGBT, Magnetic core etc. Model Editor in eSim lets the user enter the values of parameters depending on the type of device for which a model is required. The parameter values can be obtained from the data-sheet of the device. A newly created model can be exported to the model library and one can import it for different projects, whenever required. Model Editor also provides a facility to edit existing models. The GUI of the model editor is as shown in -Fig. 7.1 -

- -

Figure 7.1:

Figure 7.1: Model Editor

7.1 7.1 Creating New Model Library

eSim lets us create new model libraries based on the template model libraries. On selecting -New button the window is popped as shown in Fig. New button the window is popped as shown in Fig. 7.2. The name has to be unique otherwise the error message appears on the window. -

- -

Figure 7.2:

Figure 7.2: Creating New Model Library

After the OK button is pressed the type of model library to be created is chosen by -selecting one of the types on the left hand side i.e. Diode, BJT, MOS, JFET, IGBT, -Magnetic Core. The template model library opens up in a tabular form as shown in Fig. Magnetic Core. The template model library opens up in a tabular form as shown in Fig. 7.3 -

- -

Figure 7.3:

Figure 7.3: Choosing the Template Model Library

New parameters can be added or current parameters can be removed using

New parameters can be added or current parameters can be removed using ADD -and REMOVE buttons. Also the values of parameters can be changed in the table. -Adding and removing the parameters in library files is shown in the Fig. 7.4 and -Fig. 7.5 -

- -

Figure 7.4:

Figure 7.4: Adding the Parameter in a Library

- -

Figure 7.5:

Figure 7.5: Removing a Parameter from a Library

After the editing of the model library is done, the file can be saved by selecting the

After the editing of the model library is done, the file can be saved by selecting the SAVE -button. These libraries are saved in the User Libraries folder under User Libraries folder under deviceModelLibrary repository. -

7.2 7.2 Editing Current Model Library

The existing model library can be modified using EDIT option. On clicking the

The existing model library can be modified using EDIT option. On clicking the EDIT button -the file dialog opens where all the library files are saved as shown in Fig. 7.6. You can select -the library you want to edit. Once you are done with the editing, click on SAVE button. -

- -

Figure 7.6:

Figure 7.6: Editing Existing Model Library

7.3 7.3 Uploading external .lib file to eSim repository

eSim directly cannot use the external .lib file. It has to be uploaded to eSim repository before using it in a circuit. eSim provides the facility to upload library files. They are then converted -into xml format, which can be easily modified from the eSim interface. On clicking UPLOAD button the library can be uploaded from any location. The model library will be -saved with the name you have provided, in the User Libraries folder of repository -deviceModelLibrary. -

Chapter 8
Chapter 8
SubCircuit Builder

Subcircuit is a way to implement hierarchical modeling. Once a subcircuit for a compo- nent is created, it can be used in other circuits. -eSim provides an easy way to create a subcircuit. The following Fig. 8.1 shows the window that is opened when the SubCircuit tool is chosen from the toolbar. -

- -

Figure 8.1:

Figure 8.1: Subcircuit Window

8.1 8.1 Creating a SubCircuit

The steps to create subcircuit are as follows.

After opening the Subcircuit tool, click on After opening the Subcircuit tool, click on New Subcircuit Schematic button. It will ask the name of the subcircuit. Enter the name of subcircuit (without any - spaces) and click OK as shown in Fig. OK as shown in Fig. 8.2. -

-

Figure 8.2:
Figure 8.2: New Sub circuit Window
After clicking After clicking OK button it will open KiCad schematic. Draw your circuit - which will be later used as a subcircuit. e.g the Fig. 8.3 shows the half adder circuit. -

-

Figure 8.3:
Figure 8.3: New Sub circuit Window
Once you complete the circuit, assign port to the node of your circuit which will be - used to connect with the main circuit. The circuit will look like Fig. 8.4 after adding PORT to it. The PORT symbol can be found in Eeschema as shown in - Fig. 8.5. -
-

Figure 8.4:
Figure 8.4: Half-Adder Subcircuit

-
-

Figure 8.5:
Figure 8.5: Selection of PORT component

@@ -2548,45 +2548,45 @@ class="content">Selection of PORT component
-

Figure 8.6:
Select the working library as eSim_Subckt as shown in Fig. 8.6
+

Figure 8.6: Selecting Working Library

- 3.
Click on create a new component with reference X as shown in Fig. 8.7
Click on create a new component with reference X as shown in Fig. 8.7
- -

Figure 8.7:
Figure 8.7: Creating New Component

- 4.
Start drawing the subcircuit block. Update and save it as shown in Fig.
Start drawing the subcircuit block. Update and save it as shown in Fig. 8.8. -

-

Figure 8.8:
Figure 8.8: Half-Adder Subcircuit Block

@@ -2598,11 +2598,11 @@ class="content">Half-Adder Subcircuit Block
-
8.2 8.2 Edit a Subcircuit

The steps to edit a subcircuit are as follows.
-
After opening the Subcircuit tool, click on After opening the Subcircuit tool, click on Edit Subcircuit Schematic button. It will open a dialog box where you can select any subcircuit for editing.
@@ -2614,222 +2614,222 @@ class="cmtt-10x-x-109">Edit Subcircuit Schematic button.
If you have edited the number of ports then you have to change the block in KiCad Eeschema accordingly.
-
Close the Eeschema window and click on Close the Eeschema window and click on Convert KiCad to Ngspice button in subcircuit builder tool to convert the edited subcircuit KiCad netlist into Ngspice netlist.
-
Chapter 9
Chapter 9
Solved Examples
-
9.1 9.1 Solved Examples

-
9.1.1 9.1.1 Basic RC Circuit

-
Problem Statement:

Plot the Input and Output Waveform of an RC circuit whose input voltage (Vs) is 50Hz, -3V peak to peak. The values of Resistor (R) and Capacitor(C) are 1k and 1k and 1uf respectively. -
Solution:

-
Creating a Project: The new project is created by clicking the Creating a Project: The new project is created by clicking the New icon on the menubar. The name of the project is given in the pop up window as shown in - Fig. 9.1.
-

Figure 9.1: 9.1.
+

Figure 9.1: Creating New Project

Creating the Schematic: To create the schematic, click the very first icon of the left - toolbar as shown in the Fig. 9.2. This will open KiCad Eeschema. -

-

Figure 9.2:
Figure 9.2: Open Schematic Editor

-
To create a schematic in KiCad, we need to place the required components. Fig.
To create a schematic in KiCad, we need to place the required components. Fig. 9.3 shows the icon on the right toolbar which opens the component library. -

-

Figure 9.3:
Figure 9.3: Place Component Icon

After all the required components of the simple RC circuit are placed, wiring is done - using the Place Wire option as shown in the Fig. Place Wire option as shown in the Fig. 9.4 -

-

Figure 9.4:
Figure 9.4: Place Wire Icon

-
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for ERC. -

-

Figure 9.5:
Figure 9.5: Electric Rules Check Icon

-
Fig.
Fig. 9.6 shows the RC circuit after connecting the components by wire. -

-

Figure 9.6:
Figure 9.6: RC circuit

-
After clicking the ERC icon a window opens up. Click the
After clicking the ERC icon a window opens up. Click the Run button to run rules check. - The errors are listed in as shown in Fig. 9.7a. This error is handled by adding 9.7a. This error is handled by adding Power - Flag as shown in Fig. Flag as shown in Fig. 9.7b. -

- (a) - ERC - Run Run - (b) - Power - Flag -

Figure 9.7:
Figure 9.7: ERC check and POWER FLAG

-
After adding the Power Flag the completed RC circuit is shown in Fig.
After adding the Power Flag the completed RC circuit is shown in Fig. 9.8a and the - netlist is generated as shown in Fig. 9.8b. -

- (a) - Schematic - of RC - circuit circuit - (b) - Generating - KiCad - Netlist - of RC - circuit -

Figure 9.8:
Figure 9.8: RC Schematic and Netlist Generation

Convert KiCad to Ngspice: To convert KiCad netlist of RC circuit to NgSpice - compatible netlist click on KiCad to Ngspice icon as shown in Fig. 9.9. -

-

Figure 9.9:
Figure 9.9: Convert KiCad to Ngspice Icon

-
Now you can enter the type of analysis and source details as shown in Fig.
Now you can enter the type of analysis and source details as shown in Fig. 9.10a and - Fig. 9.10b respectively. -

- (a) - RC - Analysis Analysis - (b) - RC - Source - Details -

Figure 9.10:
Figure 9.10: RC Analysis and Source Detail

The other tab will be empty as RC circuit do not use any Ngspice model, device library @@ -2839,47 +2839,47 @@ class="content">RC Analysis and Source Detail
.
-

Figure 9.11: 9.11.
+

Figure 9.11: Simulation Icon

In eSim, there are two types of plot. First is normal Ngspice plot and second is - interactive python plot as shown in Fig. 9.12a and Fig. 9.12a and Fig. 9.12b respectively. -

- (a) - Ngspice - Plot - of RC of RC - (b) - Python - Plot - of RC -

Figure 9.12:
Figure 9.12: Ngspice and Interactive Python Plotting

In the interactive python plot you can select any node or branch to plot voltage or @@ -2888,788 +2888,785 @@ class="content">Ngspice and Interactive Python Plotting
-
9.1.2 9.1.2 Half Wave Rectifier

-
Problem Statement:

Plot the Input and Output Waveform of Half Wave Rectifier circuit where the input voltage (Vs) is 50Hz, 2V peak to peak. The value for Resistor (R) is 1k.
-
Solution:
-
The new project is created by clicking the
The new project is created by clicking the New icon on the menubar. The name of the project -is given in the window shown in Fig. 9.1.

Creating Schematic: To create the schematic, click the very first icon of the left - toolbar as shown in the Fig. 9.2. This will open KiCad Eeschema.
9.2. This will open KiCad Eeschema.

After the KiCad window is opened, to create a schematic we need to place the - required components. Fig. 9.3 shows the icon on the right toolbar which opens - the component library.

After all the required components of the simple Half Wave rectifier circuits are - placed, wiring is done using the Place Wire option as shown in the Fig. 9.4
Place Wire option as shown in the Fig. 9.4
-
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for ERC. After completing all the above steps the final Half Wave Rectifier schematic will look - like Fig. 9.13.
9.13.
-

-

Figure 9.13:
Figure 9.13: Schematic of Half Wave Rectifier circuit

-
KiCad netlist is generated as shown in the Fig. 9.14
KiCad netlist is generated as shown in the Fig. 9.14
-

-

Figure 9.14:
Figure 9.14: Half Wave Rectifier circuit Netlist Generation

-
Convert KiCad to Ngspice: After creating KiCad netlist, click on the Convert KiCad to Ngspice: After creating KiCad netlist, click on the KiCad-Ngspice - converter button. This will open converter window where you can enter details of Analysis, Source values and Device library. -

- (a) - Half - Wave - Rectifier - Analysis Analysis - (b) - Half - Wave - Rectifier - Source - Details Details - (c) - Half - Wave - Rectifier - Device - Modeling -

Figure 9.15:
Figure 9.15: Analysis, Source and Device Tab

Under device library you can add the library for diode used in the circuit. If you do not add any library it will take default Ngspice model.

Simulation: Once the KiCad-Ngspice converter runs successfully, you can run - simulation by clicking the simulation button in the toolbar.
-(a) -Ngspice -Plot -of -Half -Wave -Rectifier -
+(a) +Ngspice +Plot +of +Half +Wave +Rectifier + (b) - Python - Plot - of - Half - Wave - Rectifier -

Figure 9.16:
Figure 9.16: Half Wave Rectifier Simulation Output

-
9.1.3 9.1.3 Precision Rectifier

-
Problem Statement:

Plot the input and output waveform of the Precision Rectifier circuit where input voltage -(Vs) is 50Hz , 3Hz , 3V peak to peak.
-
Solution:
-
The new project is created by clicking the
The new project is created by clicking the New icon on the menubar. The name of the project -is given as shown in the Fig. 9.1.

Creating Schematic: To create the schematic, click the very first icon of the left - toolbar as shown in the Fig. 9.2. This will open KiCad Eeschema.
9.2. This will open KiCad Eeschema.
After the KiCad window is opened, to create a schematic we need to place the - required components. Fig. 9.3 shows the icon on the right toolbar which opens - the component library.
After all the required components of the precision rectifier circuit are placed, - wiring is done using the Place Wire option as shown in the Fig. 9.4.
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for Place Wire option as shown in the Fig. 9.4.
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for ERC. The - Fig. 9.17 shows the complete Precision Rectifier schematic after removing the errors. -

-

Figure 9.17:
Figure 9.17: Schematic of Precision Rectifier circuit

-
The KiCad netlist is generated as shown in Fig. 9.18.
The KiCad netlist is generated as shown in Fig. 9.18.
-

-

Figure 9.18:
Figure 9.18: Precision Rectifier circuit Netlist Generation

Convert KiCad to Ngspice: After creating KiCad netlist, click on KiCad-Ngspice - converter button.

This will open converter window where you can enter details of Analysis, Source values, Device library and Subcircuit. -

- (a) - Precision - Rectifier - Analysis Analysis - (b) - Precision - Rectifier - Source - Details - -

-(c) -Precision -Rectifier -Device -Modeling Modeling - (d) - Precision - Rectifier - Subcircuit -

Figure 9.19:
Figure 9.19: Analysis, Source, Device library and Subcircuit tab

Under device library you can add the library for the diode used in the circuit. If you do - not add any library it will take default Ngspice model for diode.

Under subcircuit tab you have to add the subciruit used in your circuit. If you forget to add subcircuit it will throw an error.

Simulation: Once the KiCad-Ngspice converter runs successfully, you can run the - simulation by clicking the simulation button in the toolbar.
-(a) -Ngspice -Plot -of -Precision -Rectifier -
+(a) +Ngspice +Plot +of +Precision +Rectifier + (b) - Python - Plot - of - Precision - Rectifier -

Figure 9.20:
Figure 9.20: Precision Rectifier Simulation Output

-
9.1.4 9.1.4 Inverting Amplifier

-
Problem Statement:

Plot the Input and Output Waveform of Inverting Amplifier circuit where the input voltage -(Vs) is 50Hz, 2Hz, 2V peak to peak and gain is 2. -
Solution:

Creating Schematic: To create the schematic, click the very first icon of the left - toolbar as shown in the Fig. 9.2. This will open KiCad Eeschema.
9.2. This will open KiCad Eeschema.
After the KiCad window is opened, to create a schematic we need to place the - required components. Fig. 9.3 shows the icon on the right toolbar which opens - the component library.
After all the required components of the inverting amplifier circuit are placed, - wiring is done using the Place Wire option as shown in the Fig. 9.4.
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for Place Wire option as shown in the Fig. 9.4.
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for ERC. -
The Fig.
The Fig. 9.21 shows the complete Precision Rectifier schematic after removing the errors. -

-

Figure 9.21:
Figure 9.21: Schematic of Inverting Amplifier circuit

-
The KiCad netlist is generated as shown in Fig. 9.22.
-

Figure 9.22:
The KiCad netlist is generated as shown in Fig. 9.22.
+

Figure 9.22: Inverting Amplifier circuit Netlist Generation

Convert KiCad to Ngspice: After creating KiCad netlist, click on KiCad-Ngspice - converter button.

This will open converter window where you can enter details of Analysis, Source values, Device library and Subcircuit. -
Subcircuit of Op-Amp is shown in Fig. 9.23d
-(a) -Inverting -Amplifier -Analysis -
Subcircuit of Op-Amp is shown in Fig. 9.23d
+(a) +Inverting +Amplifier +Analysis + (b) - Inverting - Amplifier - Source - Details - -

-(c) -Inverting -Amplifier -Subcircuit Subcircuit - (d) - Sub-Circuit - of - Op-Amp -

Figure 9.23:
Figure 9.23: Analysis, Source, and Subcircuit tab

Under subcircuit tab you have to add the subciruit used in your circuit. If you forget to - add subcircuit, it will throw an error.

Simulation: Once the KiCad-Ngspice converter runs successfully, you can run - simulation by clicking the simulation button in the toolbar.
-(a) -Inverting -Amplifier -Ngspice -
+(a) +Inverting +Amplifier +Ngspice +Plot - -

-(b) -Inverting -Amplifier -Python -Plot -

Figure 9.24:
Figure 9.24: Inverting Amplifier Simulation Output

-
9.1.5 9.1.5 Half Adder Example

-
Problem Statement:

Plot the Input and Output Waveform of Half Adder circuit.
-
Solution:

Creating Schematic: To create the schematic, click the very first icon of the left - toolbar as shown in the Fig. 9.2. This will open KiCad Eeschema.
9.2. This will open KiCad Eeschema.
After the KiCad window is opened, to create a schematic we need to place the - required components. Fig. 9.3 shows the icon on the right toolbar which opens - the component library.
After all the required components of the Half Adder circuit are placed, wiring is - done using the Place Wire option as shown in the Fig. 9.4.
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for Place Wire option as shown in the Fig. 9.4.
Next step is ERC (Electric Rules Check). Fig. 9.5 shows the icon for ERC. -
The Fig.
The Fig. 9.25 shows the complete Half Adder schematic after removing the - errors.

-

Figure 9.25:
Figure 9.25: Schematic of Half Adder circuit

-
The KiCad netlist is generated as shown in Fig. 9.26.
-

Figure 9.26:
The KiCad netlist is generated as shown in Fig. 9.26.
+

Figure 9.26: Half Adder circuit Netlist Generation

Convert KiCad to Ngspice: After creating KiCad netlist click on KiCad-Ngspice - converter button.

This will open converter window where you can enter details of Analysis, Source values, Ngspice model and Subcircuit. -

- (a) - Half - Adder - Analysis Analysis - (b) - Half - Adder - Source - Details - -

-(c) -Half -Adder -Ngspice -Model Model - (d) - Half - Adder - Subcircuit - Model -

Figure 9.27:
Figure 9.27: Analysis, Source, Ngspice Model and Subcircuit tab

-
Subcircuit of Half Adder in Fig. 9.28
-

Figure 9.28:
Subcircuit of Half Adder in Fig. 9.28
+

Figure 9.28: Half Adder Subcircuit

Simulation: Once the KiCad-Ngspice converter runs successfully, you can run - simulation by clicking the simulation button in the toolbar.
-(a) -Half -Adder -Ngspice -Plot -
+(a) +Half +Adder +Ngspice +Plot + (b) - Half - Adder - Python - Plot -

Figure 9.29:
Figure 9.29: Half Adder Simulation Output

-
References
References

- [1]   A. S. Sedra and K. C. Smith,    A. S. Sedra and K. C. Smith, Microelectronic Circuits - Theory and - Applications. Oxford University Press, 2009.

- [2]      K. M. Moudgalya, “Spoken Tutorial: A Collaborative and Scalable Education - Technology,” CSI Communications, vol. 35, no. 6, pp. 10–12, September 2011, - available at http://spoken-tutorial.org/CSI.pdf.

- [3]   (2013, May). [Online]. Available:    (2013, May). [Online]. Available: http://www.scilab.org/

- [4]      (2013, May). [Online]. Available: - http://scilab-test.garudaindia.in/scilab_in/,http://scilab-test.garudaindia.in/cloud

- [5]      D. B. Phatak. (2013, May) Teach 10,000 teacher programme. [Online]. - Available: http://www.it.iitb.ac.in/nmeict/MegaWorkshop.do

- [6]      K. Kannan and K. Narayanan, “Ict-enabled scalable workshops for engineering - college teachers in india,” in Post-Secondary Education and Technology: A Global - Perspective on Opportunities and Obstacles to Development (International and - Development Education), R. Clohey, S. Austin-Li, and J. C. Weldman, Eds. Palgrave Macmillan, 2012.

- [7]      (2013, May) Teach 10,000 teacher programme on analog electronics. [Online]. - Available: http://www.nmeict.iitkgp.ernet.in/Analogmain.htm

- [8]   (2013, May). [Online]. Available:    (2013, May). [Online]. Available: http://www.aakashlabs.org/

- [9]      (2013, May). [Online]. Available: - http://en.wikipedia.org/wiki/Electronic_design_automation

- [10]      (2013, May) Synaptic Package Manager Spoken Tutorial. [Online]. Available: - http://www.spoken-tutorial.org/list_videos?view=1&foss=Linux&language=English

- [11]      (2013, May). [Online]. Available: - http://www.kicad-pcb.org/display/KICAD/KiCad+EDA+Software+Suite

- [12]   (2013, May). [Online]. Available:    (2013, May). [Online]. Available: http://ngspice.sourceforge.net/

- [13]   (2013, May). [Online]. Available:    (2013, May). [Online]. Available: http://scilab.in/

- [14]   S. M. Sandler and C. Hymowitz,    S. M. Sandler and C. Hymowitz, SPICE Circuit Handbook. New York: McGraw-Hill Professional, 2006.

- [15]      J.-P. Charras and F. Tappero. (2013, May). [Online]. Available: - http://www.kicad-pcb.org/display/KICAD/KiCad+Documentation

- [16]      D. Jahshan and P. Hutchinson. (2013, May). [Online]. Available: - http://bazaar.launchpad.net/http://bazaar.launchpad.net/∼kicad-developers/kicad/doc/files/head:/doc/tutorials/

- [17]      P. Nenzi and H. Vogt. (2013) Ngspice users manual version 25plus. [Online]. - Available: http://ngspice.sourceforge.net/docs/ngspice-manual.pdf

- [18]   K. M. Moudgalya, “LATEX Training through Spoken Tutorials,”    K. M. Moudgalya, “LATEX Training through Spoken Tutorials,” TUGboat, vol. 32, no. 3, pp. 251–257, 2011.

- [19]   (2013, May). [Online]. Available:    (2013, May). [Online]. Available: http://www.spoken-tutorial.org/

- [20]   (2013, May). [Online]. Available:    (2013, May). [Online]. Available: http://oscad.in/

- - - - + -- cgit

Contents

Chapter 1Chapter 1Introduction

Chapter 2Chapter 2Installing eSim

Chapter 3Chapter 3Architecture of eSim

3.1 3.1 Modules used in eSim

3.1.1 3.1.1 Eeschema

3.1.2 3.1.2 CvPcb

3.1.3 3.1.3 Pcbnew

3.1.4 3.1.4 KiCad to Ngspice converter

3.1.5 3.1.5 Model Builder

3.1.6 3.1.6 Subcircuit Builder

3.1.7 3.1.7 Ngspice

3.2 3.2 Work flow of eSim

Chapter 4Chapter 4Getting Started

4.1 4.1 eSim Main Window

4.1.1 4.1.1 How to launch eSim in Ubuntu?

4.1.2 4.1.2 Main-GUI

Toolbar

Analysis

Source Details

Ngspice Model

Device Modeling

Subcircuits

Menubar

Project Explorer

Dockarea

Console Area

Chapter 5Chapter 5Schematic Creation

5.1 5.1 Familiarizing the Schematic Editor interface

5.1.1 5.1.1 Top menu bar

5.1.2 5.1.2 Top toolbar

5.1.3 5.1.3 Toolbar on the right

5.1.4 5.1.4 Toolbar on the left

5.1.5 5.1.5 Hotkeys

5.2 5.2 Schematic creation for simulation

5.2.1 5.2.1 Selection and placement of components

5.2.2 5.2.2 Wiring the circuit

5.2.3 5.2.3 Assigning values to components

5.2.4 5.2.4 Annotation and ERC

5.2.5 5.2.5 Netlist generation

Chapter 6PCB Design

6.1 6.1 Schematic creation for PCB design

6.1.1 6.1.1 Netlist generation for PCB

6.1.2 6.1.2 Mapping of components using Footprint Editor

6.1.3 6.1.3 Familiarising the Footprint Editor tool

Toolbar

6.1.4 6.1.4 Viewing footprints in 2D and 3D

6.1.5 6.1.5 Mapping of components in the RC circuit

6.2 6.2 Creation of PCB layout

6.2.1 6.2.1 Familiarizing the Layout Editor tool

Top toolbar

6.2.2 6.2.2 Hotkeys

6.2.3 6.2.3 PCB design example using RC circuit

Chapter 7Chapter 7Model Editor

7.1 7.1 Creating New Model Library

7.2 7.2 Editing Current Model Library

7.3 7.3 Uploading external .lib file to eSim repository

Chapter 8Chapter 8SubCircuit Builder

8.1 8.1 Creating a SubCircuit

8.2 8.2 Edit a Subcircuit

Chapter 9Chapter 9Solved Examples

9.1 9.1 Solved Examples

9.1.1 9.1.1 Basic RC Circuit

Problem Statement:

Solution:

9.1.2 9.1.2 Half Wave Rectifier

Problem Statement:

Solution:

9.1.3 9.1.3 Precision Rectifier

Problem Statement:

Solution:

9.1.4 9.1.4 Inverting Amplifier

Problem Statement:

Solution:

9.1.5 9.1.5 Half Adder Example

Problem Statement:

Solution:

References

Chapter 1
Chapter 1
Introduction

Chapter 2
Chapter 2
Installing eSim

Chapter 3
Chapter 3
Architecture of eSim

Chapter 4
Chapter 4
Getting Started

Chapter 5
Chapter 5
Schematic Creation

Chapter 6
PCB Design

Chapter 7
Chapter 7
Model Editor

Chapter 8
Chapter 8
SubCircuit Builder

Chapter 9
Chapter 9
Solved Examples