diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/ngspicetoModelica/ModelicaUI.py | 31 | ||||
| -rw-r--r-- | src/ngspicetoModelica/NgspicetoModelica.py | 499 | ||||
| -rw-r--r-- | src/projManagement/Kicad.py | 53 | ||||
| -rw-r--r-- | src/projManagement/Validation.py | 7 | ||||
| -rw-r--r-- | src/projManagement/Worker.py | 4 | ||||
| -rw-r--r-- | src/projManagement/newProject.py | 30 | ||||
| -rw-r--r-- | src/projManagement/openProject.py | 24 | ||||
| -rw-r--r-- | src/subcircuit/convertSub.py | 8 | ||||
| -rw-r--r-- | src/subcircuit/newSub.py | 17 | ||||
| -rw-r--r-- | src/subcircuit/openSub.py | 4 |
10 files changed, 468 insertions, 209 deletions
diff --git a/src/ngspicetoModelica/ModelicaUI.py b/src/ngspicetoModelica/ModelicaUI.py index 8606ce36..daef6e76 100644 --- a/src/ngspicetoModelica/ModelicaUI.py +++ b/src/ngspicetoModelica/ModelicaUI.py @@ -1,5 +1,4 @@ import os -import sys from subprocess import Popen, PIPE, STDOUT from PyQt4 import QtGui, QtCore from configuration.Appconfig import Appconfig @@ -40,7 +39,7 @@ class OpenModelicaEditor(QtGui.QWidget): self.loadOMbtn.clicked.connect(self.callOMEdit) self.grid.addWidget(self.loadOMbtn, 3, 1) - #self.setGeometry(300, 300, 350, 300) + # self.setGeometry(300, 300, 350, 300) self.setLayout(self.grid) self.show() @@ -55,7 +54,7 @@ class OpenModelicaEditor(QtGui.QWidget): try: self.cmd1 = "python ../ngspicetoModelica/NgspicetoModelica.py " + \ self.ngspiceNetlist + ' ' + self.map_json - #self.obj_workThread1 = Worker.WorkerThread(self.cmd1) + # self.obj_workThread1 = Worker.WorkerThread(self.cmd1) # self.obj_workThread1.start() convert_process = Popen( self.cmd1, @@ -68,15 +67,19 @@ class OpenModelicaEditor(QtGui.QWidget): if not error_code: self.msg = QtGui.QMessageBox() self.msg.setText( - "Ngspice netlist successfully converted to OpenModelica netlist") + "Ngspice netlist successfully converted to OpenModelica" + + "netlist") self.obj_appconfig.print_info( - "Ngspice netlist successfully converted to OpenModelica netlist") + "Ngspice netlist successfully converted to OpenModelica" + + "netlist" + ) self.msg.exec_() else: self.err_msg = QtGui.QErrorMessage() self.err_msg.showMessage( - 'Unable to convert NgSpice netlist to Modelica netlist. Check the netlist :' + + 'Unable to convert NgSpice netlist to Modelica netlist.' + + 'Check the netlist :' + error_code) self.err_msg.setWindowTitle( "Ngspice to Modelica conversion error") @@ -85,7 +88,8 @@ class OpenModelicaEditor(QtGui.QWidget): except Exception as e: self.msg = QtGui.QErrorMessage() self.msg.showMessage( - 'Unable to convert NgSpice netlist to Modelica netlist. Check the netlist :' + + 'Unable to convert NgSpice netlist to Modelica netlist.' + + 'Check the netlist :' + str(e)) self.msg.setWindowTitle("Ngspice to Modelica conversion error") @@ -101,9 +105,16 @@ class OpenModelicaEditor(QtGui.QWidget): else: self.msg = QtGui.QMessageBox() self.msgContent = "There was an error while opening OMEdit.<br/>\ - Please make sure OpenModelica is installed in your system. <br/>\ - To install it on Linux : Go to <a href=https://www.openmodelica.org/download/download-linux>OpenModelica Linux</a> and install nigthly build release.<br/>\ - To install it on Windows : Go to <a href=https://www.openmodelica.org/download/download-windows>OpenModelica Windows</a> and install latest version.<br/>" + Please make sure OpenModelica is installed in your \ + system. <br/>\ + To install it on Linux : Go to <a href= \ + https://www.openmodelica.org/download/download-linux> \ + OpenModelica Linux</a> \ + and install nigthly build release.<br/> \ + To install it on Windows : Go to <a href= \ + https://www.openmodelica.org/download/download-windows>\ + OpenModelica Windows</a> and install latest version. \ + <br/>" self.msg.setTextFormat(QtCore.Qt.RichText) self.msg.setText(self.msgContent) self.msg.setWindowTitle("Missing OpenModelica") diff --git a/src/ngspicetoModelica/NgspicetoModelica.py b/src/ngspicetoModelica/NgspicetoModelica.py index 3a148515..dfeafb53 100644 --- a/src/ngspicetoModelica/NgspicetoModelica.py +++ b/src/ngspicetoModelica/NgspicetoModelica.py @@ -84,15 +84,17 @@ class NgMoConverter: schematicInfo.append(eachline) else: schematicInfo.append(eachline) - # No need of making it lower case as netlist is already converted to ngspice + # No need of making it lower case as netlist + # is already converted to ngspice # schematicInfo.append(eachline.lower()) return optionInfo, schematicInfo def addModel(self, optionInfo): """ - Add model parameters in the modelica file and create dictionary of model parameters - This function extract model and subckt information along with their parameters with the help of optionInfo + Add model parameters in the modelica file and create dictionary of + model parameters. This function extract model and subckt information + along with their parameters with the help of optionInfo """ modelName = [] modelInfo = {} @@ -188,7 +190,8 @@ class NgMoConverter: modelInfo[refModelName][info[0]] = info[1] f.close() - return modelName, modelInfo, subcktName, paramInfo, transInfo, inbuiltModelDict + return (modelName, modelInfo, subcktName, + paramInfo, transInfo, inbuiltModelDict) def processParam(self, paramInfo): """ @@ -225,12 +228,14 @@ class NgMoConverter: def separateSource(self, compInfo): """ - Find if dependent sources are present in the schematic and if so make a dictionary with source details + Find if dependent sources are present in the schematic and + if so make a dictionary with source details """ sourceInfo = {} source = [] for eachline in compInfo: - words = eachline.split() # This line need to be confirmed with Manas + words = eachline.split() + # This line need to be confirmed with Manas if eachline[0] in ['f', 'h']: source.append(words[3]) if len(source) > 0: @@ -241,12 +246,12 @@ class NgMoConverter: return sourceInfo def getUnitVal(self, compValue): - #regExp = re.compile("([0-9]+)([a-zA-Z]+)") + # regExp = re.compile("([0-9]+)([a-zA-Z]+)") # Remove '(' and ')' if any compValue = compValue.replace('(', '').replace(')', '') compValue = compValue.lower() - #regExp = re.compile("([-])?([0-9]+)\.?([0-9]+)?([a-zA-Z])?") - regExp = re.compile("([-])?([0-9]+)\.?([0-9]+)?(\w+)?") + # regExp = re.compile("([-])?([0-9]+)\.?([0-9]+)?([a-zA-Z])?") + regExp = re.compile(r"([-])?([0-9]+)\.?([0-9]+)?(\w+)?") # separating number and string matchString = regExp.match(str(compValue)) try: @@ -279,20 +284,21 @@ class NgMoConverter: def compInit(self, compInfo, node, modelInfo, subcktName, dir_name, transInfo, inbuiltModelDict): """ - For each component in the netlist initialize it according to Modelica format + For each component in the netlist initialize it + according to Modelica format """ - #print "CompInfo inside compInit function : compInit------->",compInfo + # print "CompInfo inside compInit function : compInit------->",compInfo # initial processing to check if MOs is present. If so, library to be # used is BondLib modelicaCompInit = [] numNodesSub = {} mosInfo = {} - IfMOS = '0' + # IfMOS = '0' for eachline in compInfo: - #words = eachline.split() + # words = eachline.split() if eachline[0] == 'm': - IfMOS = '1' + # IfMOS = '1' break if len(subcktName) > 0: subOptionInfo = [] @@ -304,9 +310,9 @@ class NgMoConverter: subOptionInfo, subSchemInfo = self.separateNetlistInfo(data) for eachline in subSchemInfo: - #words = eachline.split() + # words = eachline.split() if eachline[0] == 'm': - IfMOS = '1' + # IfMOS = '1' break # Lets Start with Source details @@ -324,17 +330,30 @@ class NgMoConverter: if sourceType == 'v': if typ[0] == "pulse": per = words[9].split(')') - stat = self.mappingData["Sources"][sourceType][typ[0]] + ' ' + compName + '(rising = ' + self.getUnitVal(words[6]) + ', V = ' + self.getUnitVal(words[4])\ - + ', width = ' + self.getUnitVal(words[8]) + ', period = ' + self.getUnitVal(per[0]) + ', offset = ' + self.getUnitVal( - typ[1]) + ', startTime = ' + self.getUnitVal(words[5]) + ', falling = ' + self.getUnitVal(words[7]) + ');' + stat = self.mappingData["Sources"][sourceType][typ[0]] +\ + ' ' + compName + '(rising = ' +\ + self.getUnitVal(words[6]) + ', V = ' +\ + self.getUnitVal(words[4])\ + + ', width = ' + self.getUnitVal(words[8]) +\ + ', period = ' + self.getUnitVal(per[0]) +\ + ', offset = ' + self.getUnitVal( + typ[1]) + ', startTime = ' +\ + self.getUnitVal(words[5]) + ', falling = ' +\ + self.getUnitVal(words[7]) + ');' modelicaCompInit.append(stat) if typ[0] == "sine": theta = words[7].split(')') - stat = self.mappingData["Sources"][sourceType][typ[0]] + ' ' + compName + '(offset = ' + self.getUnitVal(typ[1]) + ', V = ' + self.getUnitVal( - words[4]) + ', freqHz = ' + self.getUnitVal(words[5]) + ', startTime = ' + self.getUnitVal(words[6]) + ', phase = ' + self.getUnitVal(theta[0]) + ');' + stat = self.mappingData["Sources"][sourceType][typ[0]] +\ + ' ' + compName + '(offset = ' +\ + self.getUnitVal(typ[1]) +\ + ', V = ' + self.getUnitVal(words[4]) + ', freqHz = ' +\ + self.getUnitVal(words[5]) + ', startTime = ' +\ + self.getUnitVal(words[6]) + ', phase = ' +\ + self.getUnitVal(theta[0]) + ');' modelicaCompInit.append(stat) if typ[0] == "pwl": - keyw = self.mappingData["Sources"][sourceType][typ[0]] + ' ' + keyw = self.mappingData["Sources"][sourceType][typ[0]] +\ + ' ' stat = keyw + compName + \ '(table = [' + self.getUnitVal(typ[1]) + \ ',' + self.getUnitVal(words[4]) + ';' @@ -347,19 +366,21 @@ class NgMoConverter: words[i - 1]) + ',' + self.getUnitVal(w[0]) else: stat = stat + \ - self.getUnitVal( - words[i - 1]) + ',' + self.getUnitVal(words[i]) + ';' + self.getUnitVal(words[i - 1]) + ',' + \ + self.getUnitVal(words[i]) + ';' stat = stat + ']);' modelicaCompInit.append(stat) if typ[0] == words[3] and typ[0] != "dc": # It is DC constant but no dc keyword val_temp = typ[0].split('v') - stat = self.mappingData["Sources"][sourceType]["dc"] + ' ' + \ + stat = self.mappingData["Sources"][sourceType]["dc"] + \ + ' ' + \ compName + \ '(V = ' + self.getUnitVal(val_temp[0]) + ');' modelicaCompInit.append(stat) elif typ[0] == words[3] and typ[0] == "dc": - stat = self.mappingData["Sources"][sourceType][typ[0]] + ' ' + \ + stat = self.mappingData["Sources"][sourceType][typ[0]] + \ + ' ' + \ compName + \ '(V = ' + \ self.getUnitVal(words[4]) + ');' # check this @@ -373,7 +394,7 @@ class NgMoConverter: # Now empty the source list as it may be used by subcircuit self.sourceDetail[:] = [] - #print "Source Detail after processing-------->",self.sourceDetail + # print "Source Detail after processing-------->",self.sourceDetail # Lets start for device for eachline in self.deviceDetail: @@ -386,7 +407,11 @@ class NgMoConverter: else: n = 1.0 vt = str(float(0.025 * n)) - #stat = self.mappingData["Devices"][deviceName]["import"]+' '+ words[0] + '(Ids = ' + modelInfo[words[3]]['is'] + ', Vt = ' + vt + ', R = 1e12' +');' + ''' + stat = self.mappingData["Devices"][deviceName]["import"]+\ + ' '+words[0] + '(Ids = ' + modelInfo[words[3]]['is']+\ + ', Vt = ' + vt + ', R = 1e12' +');' + ''' start = self.mappingData["Devices"][deviceName]["import"] stat = start + " " + words[0] + "(" tempstatList = [] @@ -395,7 +420,12 @@ class NgMoConverter: for key in modelInfo[refName]: # If parameter is not mapped then it will just pass try: - actualModelicaParam = self.mappingData["Devices"][deviceName]["mapping"][key] + actualModelicaParam = ( + self.mappingData["Devices"] + [deviceName] + ["mapping"] + [key] + ) tempstatList.append( actualModelicaParam + "=" + @@ -410,27 +440,46 @@ class NgMoConverter: userDeviceParamList.append("Vt") tempstatList.append("Vt=" + vt) # Running loop over default parameter of OpenModelica - for default in self.mappingData["Devices"][deviceName]["default"]: + for default in (self.mappingData + ["Devices"] + [deviceName] + ["default"] + ): if default in userDeviceParamList: continue else: - defaultValue = self.mappingData["Devices"][deviceName]["default"][default] + defaultValue = (self.mappingData + ["Devices"] + [deviceName] + ["default"] + [default] + ) tempstatList.append( - default + "=" + self.getUnitVal(defaultValue) + " ") + default + "=" + + self.getUnitVal(defaultValue) + " ") stat += ",".join(str(item) for item in tempstatList) + ");" else: - stat = self.mappingData["Devices"][deviceName]["import"] + \ - " " + words[0] + ";" + stat = (self.mappingData + ["Devices"] + [deviceName] + ["import"] + ) + " " + words[0] + ";" modelicaCompInit.append(stat) elif deviceName == 'q': trans = transInfo[words[4]] if trans == 'npn': - start = self.mappingData["Devices"][deviceName]["import"] + ".NPN" + start = ( + self.mappingData["Devices"][deviceName]["import"] + ) + ".NPN" elif trans == 'pnp': - start = self.mappingData["Devices"][deviceName]["import"] + ".PNP" + start = self.mappingData( + ["Devices"] + [deviceName] + ["import"] + ) + ".PNP" else: print("Transistor " + str(trans) + " Not found") sys.exit(1) @@ -451,7 +500,13 @@ class NgMoConverter: tempstatList.append("Vak=" + vak + " ") userDeviceParamList.append(str("Vak")) else: - actualModelicaParam = self.mappingData["Devices"][deviceName]["mapping"][key] + actualModelicaParam = ( + self.mappingData + ["Devices"] + [deviceName] + ["mapping"] + [key] + ) tempstatList.append( actualModelicaParam + "=" + @@ -463,13 +518,25 @@ class NgMoConverter: except BaseException: pass # Running loop over default parameter of OpenModelica - for default in self.mappingData["Devices"][deviceName]["default"]: + for default in ( + self.mappingData + ["Devices"] + [deviceName] + ["default"] + ): if default in userDeviceParamList: continue else: - defaultValue = self.mappingData["Devices"][deviceName]["default"][default] + defaultValue = ( + self.mappingData + ["Devices"] + [deviceName] + ["default"] + [default] + ) tempstatList.append( - default + "=" + self.getUnitVal(defaultValue) + " ") + default + "=" + self.getUnitVal(defaultValue) + + " ") stat += ",".join(str(item) for item in tempstatList) + ");" modelicaCompInit.append(stat) @@ -478,8 +545,14 @@ class NgMoConverter: eachline = eachline.split(words[5]) eachline = eachline[1] eachline = eachline.strip() - eachline = eachline.replace(' = ', '=').replace('= ', '=').replace(' =', '=').replace( - ' * ', '*').replace(' + ', '+').replace(' { ', '').replace(' } ', '') + eachline = eachline.replace( + ' = ', '=').replace( + '= ', '=').replace( + ' =', '=').replace( + ' * ', '*').replace( + ' + ', '+').replace( + ' { ', '').replace( + ' } ', '') eachline = eachline.split() mosInfo[words[0]] = {} for each in eachline: @@ -489,9 +562,19 @@ class NgMoConverter: trans = transInfo[words[5]] if trans == 'nmos': - start = self.mappingData["Devices"][deviceName]["import"] + ".Mn" + start = ( + self.mappingData + ["Devices"] + [deviceName] + ["import"] + ) + ".Mn" elif trans == 'pmos': - start = self.mappingData["Devices"][deviceName]["import"] + ".Mp" + start = ( + self.mappingData + ["Devices"] + [deviceName] + ["import"] + ) + ".Mp" else: print("MOSFET " + str(trans) + " not found") sys.exit(1) @@ -513,7 +596,13 @@ class NgMoConverter: tempstatList.append("U0=" + U0 + " ") userDeviceParamList.append(str("U0")) else: - actualModelicaParam = self.mappingData["Devices"][deviceName]["mapping"][key] + actualModelicaParam = ( + self.mappingData + ["Devices"] + [deviceName] + ["mapping"] + [key] + ) tempstatList.append( actualModelicaParam + "=" + @@ -526,13 +615,25 @@ class NgMoConverter: print(str(err)) # Running loop over default parameter of OpenModelica - for default in self.mappingData["Devices"][deviceName]["default"]: + for default in ( + self.mappingData + ["Devices"] + [deviceName] + ["default"] + ): if default in userDeviceParamList: continue else: - defaultValue = self.mappingData["Devices"][deviceName]["default"][default] + defaultValue = ( + self.mappingData + ["Devices"] + [deviceName] + ["default"] + [default] + ) tempstatList.append( - default + "=" + self.getUnitVal(defaultValue) + " ") + default + "=" + self.getUnitVal(defaultValue) + " " + ) # Adding LEVEL(This is constant not the device level) tempstatList.append("Level=1" + " ") @@ -571,9 +672,17 @@ class NgMoConverter: trans = transInfo[words[4]] """ if trans == 'njf': - start = self.mappingData["Devices"][deviceName]["import"]+".J_NJFJFET" + start = self.mappingData( + ["Devices"] + [deviceName] + ["import"] + )+".J_NJFJFET" elif trans == 'pjf': - start = self.mappingData["Devices"][deviceName]["import"]+".J_PJFJFET" + start = self.mappingData( + ["Devices"] + [deviceName] + ["import"] + )+".J_PJFJFET" else: print "JFET "+str(trans)+" Not found" sys.exit(1) @@ -587,7 +696,12 @@ class NgMoConverter: for key in modelInfo[refName]: # If parameter is not mapped then it will just pass try: - actualModelicaParam = self.mappingData["Devices"][deviceName]["mapping"][key] + actualModelicaParam = self.mappingData( + ["Devices"] + [deviceName] + ["mapping"] + [key] + ) tempstatList.append( actualModelicaParam + "=" + @@ -598,13 +712,25 @@ class NgMoConverter: except BaseException: pass # Running loop over default parameter of OpenModelica - for default in self.mappingData["Devices"][deviceName]["default"]: + for default in ( + self.mappingData + ["Devices"] + [deviceName] + ["default"] + ): if default in userDeviceParamList: continue else: - defaultValue = self.mappingData["Devices"][deviceName]["default"][default] + defaultValue = ( + self.mappingData + ["Devices"] + [deviceName] + ["default"] + [default] + ) tempstatList.append( - default + "=" + self.getUnitVal(defaultValue) + " ") + default + "=" + self.getUnitVal(defaultValue) + " " + ) stat += ",".join(str(item) for item in tempstatList) + "));" modelicaCompInit.append(stat) @@ -652,7 +778,13 @@ class NgMoConverter: for key in modelInfo[refName]: # If parameter is not mapped then it will just pass try: - actualModelicaParam = self.mappingData["Models"][actualModelName]["mapping"][key] + actualModelicaParam = ( + self.mappingData + ["Models"] + [actualModelName] + ["mapping"] + [key] + ) tempstatList.append( actualModelicaParam + "=" + @@ -664,13 +796,25 @@ class NgMoConverter: pass # Running loop over default parameter of OpenModelica - for default in self.mappingData["Models"][actualModelName]["default"]: + for default in ( + self.mappingData + ["Models"] + [actualModelName] + ["default"] + ): if default in userModelParamList: continue else: - defaultValue = self.mappingData["Models"][actualModelName]["default"][default] + defaultValue = ( + self.mappingData + ["Models"] + [actualModelName] + ["default"] + [default] + ) tempstatList.append( - default + "=" + self.getUnitVal(defaultValue) + " ") + default + "=" + self.getUnitVal(defaultValue) + " " + ) stat += ",".join(str(item) for item in tempstatList) + ");" modelicaCompInit.append(stat) @@ -731,9 +875,10 @@ class NgMoConverter: def getSubParamLine(self, subname, numNodesSub, subParamInfo, dir_name): """ - Take subcircuit name and give the info related to parameters in the first line and initialize it in + Take subcircuit name and give the info related + to parameters in the first line and initialize it in """ - #nodeSubInterface = [] + # nodeSubInterface = [] subOptionInfo_p = [] subSchemInfo_p = [] filename_t = subname + '.sub' @@ -756,7 +901,8 @@ class NgMoConverter: def nodeSeparate(self, compInfo, ifSub, subname, subcktName, numNodesSub): """ separate the node numbers and create nodes in modelica file; - the nodes in the subckt line should not be inside protected keyword. pinInit is the one that goes under protected keyword. + the nodes in the subckt line should not be inside protected keyword. + pinInit is the one that goes under protected keyword. """ node = [] nodeTemp = [] @@ -764,7 +910,7 @@ class NgMoConverter: pinInit = 'Modelica.Electrical.Analog.Interfaces.Pin ' pinProtectedInit = 'Modelica.Electrical.Analog.Interfaces.Pin ' protectedNode = [] - #print "CompInfo coming to nodeSeparate function: compInfo",compInfo + # print "CompInfo coming to nodeSeparate function: compInfo",compInfo # Removing '[' and ']' from compInfo for Digital node for i in range(0, len(compInfo), 1): @@ -787,7 +933,7 @@ class NgMoConverter: for i in range(0, len(templine), 1): if templine[i] in subcktName: point = i - #print "Added in node----->",words[1:point] + # print "Added in node----->",words[1:point] nodeTemp.extend(words[1:point]) else: nodeTemp.append(words[1]) @@ -829,10 +975,10 @@ class NgMoConverter: pinInit = pinInit + nodeDic[protectedNode[i]] pinInit = pinInit + ';' pinProtectedInit = pinProtectedInit + ';' - #print "Node---->",node - #print "nodeDic----->",nodeDic - #print "PinInit----->",pinInit - #print "pinProtectedinit--->",pinProtectedInit + # print "Node---->",node + # print "nodeDic----->",nodeDic + # print "PinInit----->",pinInit + # print "pinProtectedinit--->",pinProtectedInit return node, nodeDic, pinInit, pinProtectedInit def connectInfo(self, compInfo, node, nodeDic, numNodesSub, subcktName): @@ -848,8 +994,20 @@ class NgMoConverter: for i in range(0, len(words), 1): words[i] = words[i].replace("-", "") - if eachline[0] == 'r' or eachline[0] == 'R' or eachline[0] == 'c' or eachline[0] == 'C' or eachline[0] == 'd' or eachline[0] == 'D' \ - or eachline[0] == 'l' or eachline[0] == 'L' or eachline[0] == 'v' or eachline[0] == 'V' or eachline[0] == 'i' or eachline[0] == 'I': + if( + eachline[0] == 'r' or + eachline[0] == 'R' or + eachline[0] == 'c' or + eachline[0] == 'C' or + eachline[0] == 'd' or + eachline[0] == 'D' or + eachline[0] == 'l' or + eachline[0] == 'L' or + eachline[0] == 'v' or + eachline[0] == 'V' or + eachline[0] == 'i' or + eachline[0] == 'I' + ): conn = 'connect(' + words[0] + '.p,' + nodeDic[words[1]] + ');' connInfo.append(conn) conn = 'connect(' + words[0] + '.n,' + nodeDic[words[2]] + ');' @@ -880,8 +1038,8 @@ class NgMoConverter: elif eachline[0] in ['f', 'h', 'F', 'H']: vsource = words[3] sourceNodes = sourcesInfo[vsource] - #print "Source Nodes------>",sourceNodes - #print "Source Info------->",sourcesInfo + # print "Source Nodes------>",sourceNodes + # print "Source Info------->",sourcesInfo # sourceNodes = sourceNodes.split() #No need to split as it is # in the form of list conn = 'connect(' + words[0] + '.p1,' + \ @@ -937,7 +1095,7 @@ class NgMoConverter: # Process the subcircuit file .sub in the project folder - #subcktDic = {} + # subcktDic = {} subOptionInfo = [] subSchemInfo = [] subModel = [] @@ -947,7 +1105,7 @@ class NgMoConverter: nodeSubInterface = [] nodeSub = [] nodeDicSub = {} - pinInitsub = [] + # pinInitsub = [] connSubInfo = [] if len(subcktName) > 0: for eachsub in subcktName: @@ -955,70 +1113,90 @@ class NgMoConverter: basename = filename filename = os.path.join(dir_name, filename) data = self.readNetlist(filename) - #print "Data-------------------->",data + # print "Data-------------------->",data subOptionInfo, subSchemInfo = self.separateNetlistInfo(data) - #print "SubOptionInfo------------------->",subOptionInfo - #print "SubSchemInfo-------------------->",subSchemInfo + # print "SubOptionInfo------------------->",subOptionInfo + # print "SubSchemInfo-------------------->",subSchemInfo if len(subOptionInfo) > 0: newline = subOptionInfo[0] - subInitLine = newline + # subInitLine = newline newline = newline.split('.subckt') intLine = newline[1].split() for i in range(0, len(intLine), 1): nodeSubInterface.append(intLine[i]) - subModel, subModelInfo, subsubName, subParamInfo, subtransInfo, subInbuiltModelDict = self.addModel( - subOptionInfo) - #print "Sub Model------------------------------------>",subModel - #print "SubModelInfo---------------------------------->",subModelInfo - #print "subsubName------------------------------------->",subsubName - #print "subParamInfo----------------------------------->",subParamInfo - #print "subtransInfo----------------------------------->",subtransInfo - #print "subInbuiltModel----------------------------------->",subInbuiltModelDict + subModel, subModelInfo,\ + subsubName, subParamInfo,\ + subtransInfo, subInbuiltModelDict = ( + self.addModel(subOptionInfo) + ) + # print "Sub Model------------------------------->",subModel + # print "SubModelInfo------------------------>",subModelInfo + # print "subsubName---------------------------->",subsubName + # print "subParamInfo------------------------>",subParamInfo + # print "subtransInfo------------------------>",subtransInfo + # print "subInbuiltModel-------------->",subInbuiltModelDict IfMOSsub = '0' for eachline in subSchemInfo: - #words = eachline.split() + # words = eachline.split() if eachline[0] == 'm': IfMOSsub = '1' break subsubOptionInfo = [] subsubSchemInfo = [] if len(subsubName) > 0: - #subsubOptionInfo = [] - #subsubSchemInfo = [] + # subsubOptionInfo = [] + # subsubSchemInfo = [] for eachsub in subsubName: filename_st = eachsub + '.sub' filename_stemp = os.path.join(dir_name, filename_st) data = self.readNetlist(filename_stemp) - subsubOptionInfo, subsubSchemInfo = self.separateNetlistInfo( - data) + subsubOptionInfo, subsubSchemInfo = ( + self.separateNetlistInfo(data) + ) for eachline in subsubSchemInfo: - #words = eachline.split() + # words = eachline.split() if eachline[0] == 'm': IfMOSsub = '1' break - #print "subsubOptionInfo-------------------------->",subsubOptionInfo - #print "subsubSchemInfo-------------------------->",subsubSchemInfo + # print "subsubOptionInfo------------------>",subsubOptionInfo + # print "subsubSchemInfo-------------------->",subsubSchemInfo modelicaSubParam = self.processParam(subParamInfo) - #print "modelicaSubParam------------------->",modelicaSubParam - nodeSub, nodeDicSub, pinInitSub, pinProtectedInitSub = self.nodeSeparate( - subSchemInfo, '1', eachsub, subsubName, numNodesSub) - #print "NodeSub------------------------->",nodeSub - #print "NodeDicSub-------------------------->",nodeDicSub - #print "PinInitSub-------------------------->",pinInitSub - #print "PinProtectedInitSub------------------->",pinProtectedInitSub + # print "modelicaSubParam------------------>",modelicaSubParam + nodeSub, nodeDicSub, pinInitSub,\ + pinProtectedInitSub = self.nodeSeparate( + subSchemInfo, '1', eachsub, subsubName, numNodesSub) + # print "NodeSub------------------------->",nodeSub + # print "NodeDicSub-------------------------->",nodeDicSub + # print "PinInitSub-------------------------->",pinInitSub + # print "PinProtectedInitSub----------->",pinProtectedInitSub modelicaSubCompInit, numNodesSubsub = self.compInit( - subSchemInfo, nodeSub, subModelInfo, subsubName, dir_name, subtransInfo, subInbuiltModelDict) - #print "modelicaSubCompInit--------------------->",modelicaSubCompInit - #print "numNodesSubsub-------------------------->",numNodesSubsub + subSchemInfo, + nodeSub, + subModelInfo, + subsubName, + dir_name, + subtransInfo, + subInbuiltModelDict + ) + # print "modelicaSubCompInit------------>",modelicaSubCompInit + # print "numNodesSubsub---------------------->",numNodesSubsub modelicaSubParamNew = self.getSubParamLine( - eachsub, numNodesSub, modelicaSubParam, dir_name) # Ask Manas - #print "modelicaSubParamNew----------------->",modelicaSubParamNew + eachsub, + numNodesSub, + modelicaSubParam, + dir_name) # Ask Manas + # print "modelicaSubParamNew------------>",modelicaSubParamNew connSubInfo = self.connectInfo( - subSchemInfo, nodeSub, nodeDicSub, numNodesSubsub, subcktName) - #print "connSubInfo----------------->",connSubInfo + subSchemInfo, + nodeSub, + nodeDicSub, + numNodesSubsub, + subcktName + ) + # print "connSubInfo----------------->",connSubInfo newname = basename.split('.') newfilename = newname[0] outfilename = newfilename + ".mo" @@ -1063,8 +1241,22 @@ class NgMoConverter: out.writelines('\n') out.close() - return data, subOptionInfo, subSchemInfo, subModel, subModelInfo, subsubName, \ - subParamInfo, modelicaSubCompInit, modelicaSubParam, nodeSubInterface, nodeSub, nodeDicSub, pinInitSub, connSubInfo + return ( + data, + subOptionInfo, + subSchemInfo, + subModel, + subModelInfo, + subsubName, + subParamInfo, + modelicaSubCompInit, + modelicaSubParam, + nodeSubInterface, + nodeSub, + nodeDicSub, + pinInitSub, + connSubInfo + ) def main(args): @@ -1080,7 +1272,7 @@ def main(args): sys.exit() dir_name = os.path.dirname(os.path.realpath(filename)) - file_basename = os.path.basename(filename) + # file_basename = os.path.basename(filename) cwd = os.getcwd() os.chdir(dir_name) @@ -1089,26 +1281,30 @@ def main(args): # Getting all the require information lines = obj_NgMoConverter.readNetlist(filename) - #print "Complete Lines of Ngspice netlist :lines ---------------->",lines + # print "Complete Lines of Ngspice netlist :lines ---------------->",lines optionInfo, schematicInfo = obj_NgMoConverter.separateNetlistInfo(lines) - #print "All option details like analysis,subckt,.ic,.model : OptionInfo------------------->",optionInfo - #print "Schematic connection info :schematicInfo",schematicInfo - modelName, modelInfo, subcktName, paramInfo, transInfo, inbuiltModelDict = obj_NgMoConverter.addModel( - optionInfo) - #print "Name of Model : modelName-------------------->",modelName - #print "Model Information :modelInfo--------------------->",modelInfo - #print "Subcircuit Name :subcktName------------------------>",subcktName - #print "Parameter Information :paramInfo---------------------->",paramInfo - #print "InBuilt Model ---------------------->",inbuiltModelDict + # print "All option details like analysis,subckt,.ic,.model : + # OptionInfo------------------->",optionInfo + # print "Schematic connection info :schematicInfo",schematicInfo + modelName, modelInfo, subcktName, paramInfo, transInfo,\ + inbuiltModelDict = ( + obj_NgMoConverter.addModel(optionInfo) + ) + # print "Name of Model : modelName-------------------->",modelName + # print "Model Information :modelInfo--------------------->",modelInfo + # print "Subcircuit Name :subcktName------------------------>",subcktName + # print "Parameter Information :paramInfo---------------------->",paramInfo + # print "InBuilt Model ---------------------->",inbuiltModelDict modelicaParamInit = obj_NgMoConverter.processParam(paramInfo) - #print "Make modelicaParamInit from paramInfo : processParamInit------------->",modelicaParamInit + # print "Make modelicaParamInit from paramInfo + # : processParamInit------------->",modelicaParamInit compInfo, plotInfo = obj_NgMoConverter.separatePlot(schematicInfo) - #print "Plot info like plot,print etc :plotInfo",plotInfo + # print "Plot info like plot,print etc :plotInfo",plotInfo IfMOS = '0' for eachline in compInfo: - words = eachline.split() + # words = eachline.split() if eachline[0] == 'm': IfMOS = '1' break @@ -1116,44 +1312,61 @@ def main(args): subOptionInfo = [] subSchemInfo = [] if len(subcktName) > 0: - #subOptionInfo = [] - #subSchemInfo = [] + # subOptionInfo = [] + # subSchemInfo = [] for eachsub in subcktName: filename_temp = eachsub + '.sub' data = obj_NgMoConverter.readNetlist(filename_temp) - #print "Data---------->",data - subOptionInfo, subSchemInfo = obj_NgMoConverter.separateNetlistInfo( - data) + # print "Data---------->",data + subOptionInfo, subSchemInfo = ( + obj_NgMoConverter.separateNetlistInfo(data) + ) for eachline in subSchemInfo: - words = eachline.split() + # words = eachline.split() if eachline[0] == 'm': IfMOS = '1' break - #print "Subcircuit OptionInfo : subOptionInfo------------------->",subOptionInfo - #print "Subcircuit Schematic Info :subSchemInfo-------------------->",subSchemInfo + # print "Subcircuit OptionInfo + # : subOptionInfo------------------->",subOptionInfo + # print "Subcircuit Schematic Info + # : subSchemInfo-------------------->",subSchemInfo node, nodeDic, pinInit, pinProtectedInit = obj_NgMoConverter.nodeSeparate( compInfo, '0', [], subcktName, []) - #print "All nodes in the netlist :node---------------->",node - #print "NodeDic which will be used for modelica : nodeDic------------->",nodeDic - #print "PinInit-------------->",pinInit - #print "pinProtectedInit----------->",pinProtectedInit + # print "All nodes in the netlist :node---------------->",node + # print "NodeDic which will be used for modelica + # : nodeDic------------->",nodeDic + # print "PinInit-------------->",pinInit + # print "pinProtectedInit----------->",pinProtectedInit modelicaCompInit, numNodesSub = obj_NgMoConverter.compInit( - compInfo, node, modelInfo, subcktName, dir_name, transInfo, inbuiltModelDict) - #print "ModelicaComponents : modelicaCompInit----------->",modelicaCompInit - #print "SubcktNumNodes : numNodesSub---------------->",numNodesSub + compInfo, + node, + modelInfo, + subcktName, + dir_name, + transInfo, + inbuiltModelDict + ) + # print "ModelicaComponents + # : modelicaCompInit----------->",modelicaCompInit + # print "SubcktNumNodes + # : numNodesSub---------------->",numNodesSub connInfo = obj_NgMoConverter.connectInfo( compInfo, node, nodeDic, numNodesSub, subcktName) - #print "ConnInfo------------------>",connInfo + # print "ConnInfo------------------>",connInfo # After Sub Ckt Func if len(subcktName) > 0: - data, subOptionInfo, subSchemInfo, subModel, subModelInfo, subsubName, subParamInfo, modelicaSubCompInit, modelicaSubParam,\ - nodeSubInterface, nodeSub, nodeDicSub, pinInitSub, connSubInfo = obj_NgMoConverter.procesSubckt( - subcktName, numNodesSub, dir_name) # Adding 'numNodesSub' by Fahim + data, subOptionInfo, subSchemInfo, subModel, subModelInfo,\ + subsubName, subParamInfo, modelicaSubCompInit, modelicaSubParam,\ + nodeSubInterface, nodeSub, nodeDicSub, pinInitSub, connSubInfo = ( + obj_NgMoConverter.procesSubckt( + subcktName, numNodesSub, dir_name + ) + ) # Adding 'numNodesSub' by Fahim # Creating Final Output file newfile = filename.split('.') @@ -1166,7 +1379,7 @@ def main(args): out.writelines('import Modelica.Electrical.*;') elif IfMOS == '1': out.writelines('import BondLib.Electrical.*;') - #out.writelines('import Modelica.Electrical.*;') + # out.writelines('import Modelica.Electrical.*;') out.writelines('\n') for eachline in modelicaParamInit: diff --git a/src/projManagement/Kicad.py b/src/projManagement/Kicad.py index 2fc17615..2eaef643 100644 --- a/src/projManagement/Kicad.py +++ b/src/projManagement/Kicad.py @@ -1,4 +1,4 @@ -#========================================================================= +# ========================================================================= # # FILE: openKicad.py # @@ -14,7 +14,7 @@ # ORGANIZATION: eSim team at FOSSEE, IIT Bombay. # CREATED: Tuesday 17 Feb 2015 # REVISION: --- -#========================================================================= +# ========================================================================= import os from . import Validation @@ -25,7 +25,8 @@ from PyQt4 import QtGui class Kicad: """ - This class called the Kicad Schematic,KicadtoNgspice Converter,Layout editor and Footprint Editor + This class called the Kicad Schematic,KicadtoNgspice Converter,Layout + editor and Footprint Editor """ def __init__(self, dockarea): @@ -47,7 +48,7 @@ class Kicad: # Validating if current project is available or not if self.obj_validation.validateKicad(self.projDir): - #print "calling Kicad schematic ",self.projDir + # print "calling Kicad schematic ",self.projDir self.projName = os.path.basename(self.projDir) self.project = os.path.join(self.projDir, self.projName) @@ -59,13 +60,16 @@ class Kicad: else: self.msg = QtGui.QErrorMessage(None) self.msg.showMessage( - 'Please select the project first. You can either create new project or open existing project') + 'Please select the project first. You can either create' + + 'new project or open existing project') self.obj_appconfig.print_warning( - 'Please select the project first. You can either create new project or open existing project') + 'Please select the project first. You can either create' + + 'new project or open existing project') self.msg.setWindowTitle("Error Message") ''' - #Commenting as it is no longer needed as PBC and Layout will open from eeschema + # Commenting as it is no longer needed as PBC and Layout will open from + # eeschema def openFootprint(self): """ This function create command to open Footprint editor @@ -73,7 +77,8 @@ class Kicad: print "Kicad Foot print Editor called" self.projDir = self.obj_appconfig.current_project["ProjectName"] try: - self.obj_appconfig.print_info('Kicad Footprint Editor is called for project : ' + self.projDir) + self.obj_appconfig.print_info('Kicad Footprint Editor is called' + + 'for project : ' + self.projDir) except: pass #Validating if current project is available or not @@ -90,8 +95,11 @@ class Kicad: else: self.msg = QtGui.QErrorMessage(None) - self.msg.showMessage('Please select the project first. You can either create new project or open existing project') - self.obj_appconfig.print_warning('Please select the project first. You can either create new project or open existing project') + self.msg.showMessage('Please select the project first. You can' + + 'either create new project or open existing project') + self.obj_appconfig.print_warning('Please select the project' + + 'first. You can either create new project or open existing' + + 'project') self.msg.setWindowTitle("Error Message") def openLayout(self): @@ -101,7 +109,8 @@ class Kicad: print "Kicad Layout is called" self.projDir = self.obj_appconfig.current_project["ProjectName"] try: - self.obj_appconfig.print_info('PCB Layout is called for project : ' + self.projDir) + self.obj_appconfig.print_info('PCB Layout is called for project : ' + + self.projDir) except: pass #Validating if current project is available or not @@ -117,8 +126,11 @@ class Kicad: else: self.msg = QtGui.QErrorMessage(None) - self.msg.showMessage('Please select the project first. You can either create new project or open existing project') - self.obj_appconfig.print_warning('Please select the project first. You can either create new project or open existing project') + self.msg.showMessage('Please select the project first. You can' + + 'either create new project or open existing project') + self.obj_appconfig.print_warning('Please select the project' + + 'first. You can either create new project or open existing' + + 'project') self.msg.setWindowTitle("Error Message") ''' @@ -145,7 +157,8 @@ class Kicad: # Creating a command to run """ - self.cmd = "python ../kicadtoNgspice/KicadtoNgspice.py " +self.project+".cir " + self.cmd = ("python ../kicadtoNgspice/KicadtoNgspice.py " + + "self.project+".cir ") self.obj_workThread = Worker.WorkerThread(self.cmd) self.obj_workThread.start() """ @@ -155,15 +168,19 @@ class Kicad: else: self.msg = QtGui.QErrorMessage(None) self.msg.showMessage( - 'The project does not contain any Kicad netlist file for conversion.') + 'The project does not contain any Kicad netlist file for' + + 'conversion.') self.obj_appconfig.print_error( - 'The project does not contain any Kicad netlist file for conversion.') + 'The project does not contain any Kicad netlist file for' + + 'conversion.') self.msg.setWindowTitle("Error Message") else: self.msg = QtGui.QErrorMessage(None) self.msg.showMessage( - 'Please select the project first. You can either create new project or open existing project') + 'Please select the project first. You can either create' + + 'new project or open existing project') self.obj_appconfig.print_warning( - 'Please select the project first. You can either create new project or open existing project') + 'Please select the project first. You can either create' + + 'new project or open existing project') self.msg.setWindowTitle("Error Message") diff --git a/src/projManagement/Validation.py b/src/projManagement/Validation.py index 38d45495..11cdcaf9 100644 --- a/src/projManagement/Validation.py +++ b/src/projManagement/Validation.py @@ -1,11 +1,12 @@ -#========================================================================= +# ========================================================================= # # FILE: Validation.py # # USAGE: --- # -# DESCRIPTION: This module is use to create validation for openProject,newProject and other activity. +# DESCRIPTION: This module is use to create validation for openProject, +# newProject and other activity. # # OPTIONS: --- # REQUIREMENTS: --- @@ -15,7 +16,7 @@ # ORGANIZATION: eSim team at FOSSEE, IIT Bombay. # CREATED: Wednesday 12 February 2015 # REVISION: --- -#========================================================================= +# ========================================================================= import os import re import distutils.spawn diff --git a/src/projManagement/Worker.py b/src/projManagement/Worker.py index fe884ef3..65c67dde 100644 --- a/src/projManagement/Worker.py +++ b/src/projManagement/Worker.py @@ -1,4 +1,4 @@ -#========================================================================= +# ========================================================================= # # FILE: WorkerThread.py # @@ -14,7 +14,7 @@ # ORGANIZATION: eSim team at FOSSEE, IIT Bombay. # CREATED: Tuesday 24 Feb 2015 # REVISION: --- -#========================================================================= +# ========================================================================= from PyQt4 import QtCore import subprocess from configuration.Appconfig import Appconfig diff --git a/src/projManagement/newProject.py b/src/projManagement/newProject.py index f01d2f53..40d66003 100644 --- a/src/projManagement/newProject.py +++ b/src/projManagement/newProject.py @@ -1,5 +1,5 @@ -#========================================================================= +# ========================================================================= # # FILE: newProject.py # @@ -15,7 +15,7 @@ # ORGANIZATION: eSim team at FOSSEE, IIT Bombay. # CREATED: Wednesday 12 February 2015 # REVISION: --- -#========================================================================= +# ========================================================================= from PyQt4 import QtGui from .Validation import Validation from configuration.Appconfig import Appconfig @@ -37,10 +37,10 @@ class NewProjectInfo(QtGui.QWidget): """ This function create Project related directories and files """ - #print "Create Project Called" + # print "Create Project Called" self.projName = projName self.workspace = self.obj_appconfig.default_workspace['workspace'] - #self.projName = self.projEdit.text() + # self.projName = self.projEdit.text() # Remove leading and trailing space self.projName = str(self.projName).rstrip().lstrip() @@ -62,18 +62,19 @@ class NewProjectInfo(QtGui.QWidget): self.projDir, self.projName + ".proj") f = open(self.projFile, "w") except BaseException: - #print "Some Thing Went Wrong" + # print "Some Thing Went Wrong" self.msg = QtGui.QErrorMessage(self) self.msg.showMessage( - 'Unable to create project. Please make sure you have write permission on ' + - self.workspace) + 'Unable to create project. Please make sure you have' + + 'write permission on ' + + self.workspace) self.msg.setWindowTitle("Error Message") f.write("schematicFile " + self.projName + ".sch\n") f.close() # Now Change the current working project newprojlist = [] - #self.obj_appconfig = Appconfig() + # self.obj_appconfig = Appconfig() self.obj_appconfig.current_project['ProjectName'] = self.projDir newprojlist.append(self.projName + '.proj') self.obj_appconfig.project_explorer[self.projDir] = newprojlist @@ -89,23 +90,24 @@ class NewProjectInfo(QtGui.QWidget): return self.projDir, newprojlist elif self.reply == "CHECKEXIST": - #print "Project already exist" + # print "Project already exist" self.msg = QtGui.QErrorMessage(self) self.msg.showMessage( - 'The project "' + - self.projName + - '" already exist.Please select the different name or delete existing project') + 'The project "' + + self.projName + + '" already exist.Please select the different name or delete' + + ' existing project') self.msg.setWindowTitle("Error Message") elif self.reply == "CHECKNAME": - #print "Name is not proper" + # print "Name is not proper" self.msg = QtGui.QErrorMessage(self) self.msg.showMessage( 'The project name should not contain space between them') self.msg.setWindowTitle("Error Message") elif self.reply == "NONE": - #print "Empty Project Name" + # print "Empty Project Name" self.msg = QtGui.QErrorMessage(self) self.msg.showMessage('The project name cannot be empty') self.msg.setWindowTitle("Error Message") diff --git a/src/projManagement/openProject.py b/src/projManagement/openProject.py index 58a6be0a..6cdcbb38 100644 --- a/src/projManagement/openProject.py +++ b/src/projManagement/openProject.py @@ -1,5 +1,5 @@ -#========================================================================= +# ========================================================================= # # FILE: openProject.py # @@ -15,7 +15,7 @@ # ORGANIZATION: eSim team at FOSSEE, IIT Bombay. # CREATED: Wednesday 12 February 2015 # REVISION: --- -#========================================================================= +# ========================================================================= from PyQt4 import QtGui from .Validation import Validation @@ -39,7 +39,7 @@ class OpenProjectInfo(QtGui.QWidget): self.projDir = QtGui.QFileDialog.getExistingDirectory( self, "open", self.openDir) - if self.obj_validation.validateOpenproj(self.projDir) == True: + if self.obj_validation.validateOpenproj(self.projDir): self.obj_Appconfig.current_project['ProjectName'] = str( self.projDir) if os.path.isdir(self.projDir): @@ -47,8 +47,10 @@ class OpenProjectInfo(QtGui.QWidget): for dirs, subdirs, filelist in os.walk( self.obj_Appconfig.current_project["ProjectName"]): - directory = dirs - files = filelist + # directory = dirs + # files = filelist + # above 'directory' and 'files' variable never used + pass self.obj_Appconfig.project_explorer[dirs] = filelist json.dump( self.obj_Appconfig.project_explorer, open( @@ -59,9 +61,15 @@ class OpenProjectInfo(QtGui.QWidget): else: self.obj_Appconfig.print_error( - "The project doesn't contain .proj file. Please select the proper directory else you won't be able to perform any operation") - reply = QtGui.QMessageBox.critical(None, "Error Message", '''<b> Error: The project doesn't contain .proj file.</b><br/> - <b>Please select the proper project directory else you won't be able to perform any operation</b>''', QtGui.QMessageBox.Ok | QtGui.QMessageBox.Cancel) + "The project doesn't contain .proj file. Please select the" + + "proper directory else you won't be able to perform any" + + "operation") + reply = QtGui.QMessageBox.critical(None, "Error Message", + '''<b>Error: The project doesn't contain .proj file.</b><br/> + <b>Please select the proper project directory else you won't + be able to perform any operation</b>''', + QtGui.QMessageBox.Ok | + QtGui.QMessageBox.Cancel) if reply == QtGui.QMessageBox.Ok: self.body() diff --git a/src/subcircuit/convertSub.py b/src/subcircuit/convertSub.py index 23e6d52b..31ae3022 100644 --- a/src/subcircuit/convertSub.py +++ b/src/subcircuit/convertSub.py @@ -25,7 +25,7 @@ class convertSub(QtGui.QWidget): if self.obj_validation.validateKicad(self.projDir): # Checking if project has .cir file or not if self.obj_validation.validateCir(self.projDir): - #print "CIR file present" + # print "CIR file present" self.projName = os.path.basename(self.projDir) self.project = os.path.join(self.projDir, self.projName) @@ -35,10 +35,12 @@ class convertSub(QtGui.QWidget): else: self.msg = QtGui.QErrorMessage(None) self.msg.showMessage( - 'The subcircuit does not contain any Kicad netlist file for conversion.') + 'The subcircuit does not contain any Kicad netlist\ + file for conversion.') self.msg.setWindowTitle("Error Message") else: self.msg = QtGui.QErrorMessage(None) self.msg.showMessage( - 'Please select the subcircuit first. You can either create new subcircuit or open existing subcircuit') + 'Please select the subcircuit first. You can either create \ + new subcircuit or open existing subcircuit') self.msg.setWindowTitle("Error Message") diff --git a/src/subcircuit/newSub.py b/src/subcircuit/newSub.py index 6e0c7e63..79080e55 100644 --- a/src/subcircuit/newSub.py +++ b/src/subcircuit/newSub.py @@ -1,4 +1,4 @@ -from PyQt4 import QtGui, QtCore +from PyQt4 import QtGui, QtCore # noqa from projManagement.Validation import Validation from configuration.Appconfig import Appconfig from projManagement import Worker @@ -46,26 +46,29 @@ class NewSub(QtGui.QWidget): self.obj_workThread.start() self.close() except BaseException: - #print "Some Thing Went Wrong" + # print "Some Thing Went Wrong" self.msg = QtGui.QErrorMessage(self) self.msg.showMessage( - 'Unable to create subcircuit. Please make sure you have write permission on ' + + 'Unable to create subcircuit. Please make sure\ + you have write permission on ' + self.schematic_path) self.msg.setWindowTitle("Error Message") - self.obj_appconfig.current_subcircuit['SubcircuitName'] = self.schematic_path + self.obj_appconfig.current_subcircuit['SubcircuitName'] \ + = self.schematic_path elif self.reply == "CHECKEXIST": - #print "Project already exist" + # print "Project already exist" self.msg = QtGui.QErrorMessage(self) self.msg.showMessage( 'The subcircuit "' + self.create_schematic + - '" already exist.Please select the different name or delete existing subcircuit') + '" already exist.Please select the different name or delete' + + 'existing subcircuit') self.msg.setWindowTitle("Error Message") elif self.reply == "CHECKNAME": - #print "Name is not proper" + # print "Name is not proper" self.msg = QtGui.QErrorMessage(self) self.msg.showMessage( 'The subcircuit name should not contain space between them') diff --git a/src/subcircuit/openSub.py b/src/subcircuit/openSub.py index 32ad5d39..ba6d0617 100644 --- a/src/subcircuit/openSub.py +++ b/src/subcircuit/openSub.py @@ -19,7 +19,9 @@ class openSub(QtGui.QWidget): None, "Open File", "../SubcircuitLibrary")) if self.editfile: self.obj_Appconfig = Appconfig() - self.obj_Appconfig.current_subcircuit['SubcircuitName'] = self.editfile + self.obj_Appconfig.current_subcircuit['SubcircuitName'] = ( + self.editfile + ) self.schname = os.path.basename(self.editfile) self.editfile = os.path.join(self.editfile, self.schname) self.cmd = "eeschema " + self.editfile + ".sch " |