diff options
Diffstat (limited to 'library/modelParamXML')
52 files changed, 732 insertions, 0 deletions
diff --git a/library/modelParamXML/Analog/aswitch.xml b/library/modelParamXML/Analog/aswitch.xml new file mode 100644 index 00000000..fe50ecd3 --- /dev/null +++ b/library/modelParamXML/Analog/aswitch.xml @@ -0,0 +1,14 @@ +<model> +<name>aswitch</name> +<type>Analog</type> +<node_number>3</node_number> +<title>Add Parameters for Analog Switch</title> +<split>1-NV:2-V</split> +<param> + <cntl_off default="0.0">Enter Control OFF value (default=0.0)</cntl_off> + <cntl_on default="1.0">Enter Control ON value(default=1.0)</cntl_on> + <r_off default="1.0e12">Enter OFF Resistance (default=1.0e12)</r_off> + <r_on default="1.0">Enter ON Resistance (default=1.0)</r_on> + <log default="TRUE">Enter Log (default=TRUE)</log> +</param> +</model> diff --git a/library/modelParamXML/Analog/climit.xml b/library/modelParamXML/Analog/climit.xml new file mode 100644 index 00000000..0d1f9c7e --- /dev/null +++ b/library/modelParamXML/Analog/climit.xml @@ -0,0 +1,15 @@ +<model> +<name>climit</name> +<type>Analog</type> +<node_number>4</node_number> +<title>Add Parameters for Controlled Limiter</title> +<split>None</split> +<param> + <in_offset default="0.0">Enter offset for Input (default=0.0)</in_offset> + <gain default="1.0">Enter value for Gain (default=1.0)</gain> + <upper_delta default="0.0">Enter Output Upper Delta (default=0.0)</upper_delta> + <lower_delta default="0.0">Enter Output Lower Delta (default=0.0)</lower_delta> + <limit_range default="1.0e-6">Enter Limit Range (default=1.0e-6)</limit_range> + <fraction default="false">Enter Fraction (default=false)</fraction> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Analog/d_dt.xml b/library/modelParamXML/Analog/d_dt.xml new file mode 100644 index 00000000..65494392 --- /dev/null +++ b/library/modelParamXML/Analog/d_dt.xml @@ -0,0 +1,14 @@ +<model> +<name>d_dt</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameters for Differentiator</title> +<split>None</split> +<param> + <gain default="1.0">Enter value for Gain (default=1.0)</gain> + <out_offset default="0.0">Enter offset for Output (default=0.0)</out_offset> + <out_lower_limit default="0.0">Enter Output Lower Limit (default=0.0)</out_lower_limit> + <out_upper_limit default="1.0">Enter Output Upper Limit (default=1.0)</out_upper_limit> + <limit_range default="1.0e-6">Enter Limit Range (default=1.0e-6)</limit_range> +</param> +</model> diff --git a/library/modelParamXML/Analog/divide.xml b/library/modelParamXML/Analog/divide.xml new file mode 100644 index 00000000..d501ae4e --- /dev/null +++ b/library/modelParamXML/Analog/divide.xml @@ -0,0 +1,18 @@ +<model> +<name>divide</name> +<type>Analog</type> +<node_number>3</node_number> +<title>Add Parameters for Multiplier</title> +<split>None</split> +<param> + <num_offset default="0.0">Enter offset for Numerator (default=0.0)</num_offset> + <num_gain default="1.0">Enter gain for Numerator (default=1.0)</num_gain> + <den_offset default="0.0">Enter offset for Denominator (default=0.0)</den_offset> + <den_gain default="1.0">Enter gain for Denominator (default=1.0)</den_gain> + <den_lower_limit default="1.0e-10">Enter Denominator Lower Limit (default=1.0e-10)</den_lower_limit> + <den_domain default="1.0e-10">Enter Denominator Domain (default=1.0e-10)</den_domain> + <fraction default="false">Enter Fraction (default=false)</fraction> + <out_gain default="1.0">Enter gain for output (default=1.0)</out_gain> + <out_offset default="0.0">Enter offset for output (default=0.0)</out_offset> +</param> +</model> diff --git a/library/modelParamXML/Analog/gain.xml b/library/modelParamXML/Analog/gain.xml new file mode 100644 index 00000000..a8656072 --- /dev/null +++ b/library/modelParamXML/Analog/gain.xml @@ -0,0 +1,12 @@ +<model> +<name>gain</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameters for model Gain</title> +<split>None</split> +<param> + <in_offset default="0.0">Enter offset for input (default=0.0)</in_offset> + <gain vector="1" default="1.0">Enter gain (default=1.0)</gain> + <out_offset default="0.0">Enter offset for output (default=0.0)</out_offset> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Analog/hyst.xml b/library/modelParamXML/Analog/hyst.xml new file mode 100644 index 00000000..56a60c0f --- /dev/null +++ b/library/modelParamXML/Analog/hyst.xml @@ -0,0 +1,16 @@ +<model> +<name>hyst</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameters for Hysteresis</title> +<split>None</split> +<param> + <in_low default="0.0">Enter Input Low Value (default=0.0)</in_low> + <in_high default="1.0">Enter Input High Value (default=1.0)</in_high> + <hyst default="0.1">Enter Hysteresis (default=0.1)</hyst> + <out_lower_limit default="0.0">Enter Output Lower Limit (default=0.0)</out_lower_limit> + <out_upper_limit default="1.0">Enter Output Upper Limit (default=1.0)</out_upper_limit> + <input_domain default="0.01">Enter Input Domain Value (default=0.01)</input_domain> + <fraction default="TRUE">Enter Fraction (default=TRUE)</fraction> +</param> +</model> diff --git a/library/modelParamXML/Analog/ilimit.xml b/library/modelParamXML/Analog/ilimit.xml new file mode 100644 index 00000000..32b2149f --- /dev/null +++ b/library/modelParamXML/Analog/ilimit.xml @@ -0,0 +1,19 @@ +<model> +<name>ilimit</name> +<type>Analog</type> +<node_number>4</node_number> +<title>Add Parameters for Current Limiter </title> +<split>None</split> +<param> + <in_offset default="0.0">Enter offset for Input (default=0.0)</in_offset> + <gain default="1.0">Enter value for Gain (default=1.0)</gain> + <r_out_source default="1.0">Enter value for Sourcing Resistance (default=1.0)</r_out_source> + <r_out_sink default="1.0">Enter value for Sinking Resistance (default=1.0)</r_out_sink> + <i_limit_source default="1.0e-12">Enter Current Sourcing Limit (default=1.0e-12)</i_limit_source> + <i_limit_sink default="1.0e-12">Enter Current Sinking Limit (default=1.0e-12)</i_limit_sink> + <v_pwr_range default="1.0e-6">Enter Power Supply Range (default=1.0e-6)</v_pwr_range> + <i_source_range default="1.0e-9">Enter Current Sourcing Range (default=1.0e-9)</i_source_range> + <i_sink_range default="1.0e-9">Enter Current Sinking Range (default=1.0e-9)</i_sink_range> + <r_out_domain default="1.0e-9">Enter Voltage Delta Range (default=1.0e-9)</r_out_domain> +</param> +</model> diff --git a/library/modelParamXML/Analog/int.xml b/library/modelParamXML/Analog/int.xml new file mode 100644 index 00000000..6ccec625 --- /dev/null +++ b/library/modelParamXML/Analog/int.xml @@ -0,0 +1,15 @@ +<model> +<name>int</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameters for int</title> +<split>None</split> +<param> + <in_offset default="0.0">Enter offset for Input (default=0.0)</in_offset> + <gain default="1.0">Enter value for Gain (default=1.0)</gain> + <out_lower_limit default="0.0">Enter Output Lower Limit (default=0.0)</out_lower_limit> + <out_upper_limit default="1.0">Enter Output Upper Limit (default=1.0)</out_upper_limit> + <limit_range default="1.0e-6">Enter Limit Range (default=1.0e-6)</limit_range> + <out_ic default="0.0">Enter Output Initial Condition (default=0.0)</out_ic> +</param> +</model> diff --git a/library/modelParamXML/Analog/limit.xml b/library/modelParamXML/Analog/limit.xml new file mode 100644 index 00000000..c2a1f382 --- /dev/null +++ b/library/modelParamXML/Analog/limit.xml @@ -0,0 +1,15 @@ +<model> +<name>limit</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameters for Limiter</title> +<split>None</split> +<param> + <in_offset default="0.0">Enter offset for Input (default=0.0)</in_offset> + <gain default="1.0">Enter value for Gain (default=1.0)</gain> + <out_lower_limit default="0.0">Enter Output Lower Limit (default=0.0)</out_lower_limit> + <out_upper_limit default="1.0">Enter Output Upper Limit (default=1.0)</out_upper_limit> + <limit_range default="1.0e-6">Enter Limit Range (default=1.0e-6)</limit_range> + <fraction default="false">Enter Fraction (default=false)</fraction> +</param> +</model> diff --git a/library/modelParamXML/Analog/mult.xml b/library/modelParamXML/Analog/mult.xml new file mode 100644 index 00000000..e41463ff --- /dev/null +++ b/library/modelParamXML/Analog/mult.xml @@ -0,0 +1,13 @@ +<model> +<name>mult</name> +<type>Analog</type> +<node_number>3</node_number> +<title>Add Parameters for Multiplier</title> +<split>2-V:1-NV</split> +<param> + <in_offset vector="2" default="0.0">Enter offset for input (default=0.0)</in_offset> + <in_gain vector="2" default="1.0">Enter gain for input(default=1.0)</in_gain> + <out_gain default="1.0">Enter gain for output (default=1.0)</out_gain> + <out_offset default="0.0">Enter offset for output (default=0.0)</out_offset> +</param> +</model> diff --git a/library/modelParamXML/Analog/slew.xml b/library/modelParamXML/Analog/slew.xml new file mode 100644 index 00000000..2eafde2d --- /dev/null +++ b/library/modelParamXML/Analog/slew.xml @@ -0,0 +1,12 @@ +<model> +<name>slew</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameters for slew</title> +<split>None</split> +<param> + <rise_slope default="1.0e9">Enter Rising Slope Value (default=1.0e9)</rise_slope> + <fall_slop default="1.0e9">Enter Falling Slope Value (default=1.0e9)</fall_slop> + <range default="0.1">Enter Range (default=0.1)</range> +</param> +</model> diff --git a/library/modelParamXML/Analog/summer.xml b/library/modelParamXML/Analog/summer.xml new file mode 100644 index 00000000..d9856b62 --- /dev/null +++ b/library/modelParamXML/Analog/summer.xml @@ -0,0 +1,13 @@ +<model> +<name>summer</name> +<type>Analog</type> +<node_number>3</node_number> +<title>Add Parameters for Summer</title> +<split>2-V:1-NV</split> +<param> + <in_offset vector="2" default="0.0">Enter offset for input (default=0.0)</in_offset> + <in_gain vector="2" default="1.0">Enter gain for input(default=1.0)</in_gain> + <out_gain default="1.0">Enter gain for output (default=1.0)</out_gain> + <out_offset default="0.0">Enter offset for output (default=0.0)</out_offset> +</param> +</model> diff --git a/library/modelParamXML/Analog/temp.xml b/library/modelParamXML/Analog/temp.xml new file mode 100644 index 00000000..20f00004 --- /dev/null +++ b/library/modelParamXML/Analog/temp.xml @@ -0,0 +1,12 @@ +<model> +<name>gain</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameter for model gain</title> +<split>None</split> +<param> + <in_offset default="0.0">Enter offset for input (default=0.0)</in_offset> + <gain vector="2" default="1.0">Enter gain (default=1.0)</gain> + <out_offset default="0.0">Enter offset for output (default=0.0)</out_offset> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Analog/zener.xml b/library/modelParamXML/Analog/zener.xml new file mode 100644 index 00000000..c6e32c36 --- /dev/null +++ b/library/modelParamXML/Analog/zener.xml @@ -0,0 +1,14 @@ +<model> +<name>zener</name> +<type>Analog</type> +<node_number>2</node_number> +<title>Add Parameters for Zener Diode</title> +<split>None</split> +<param> + <v_breakdown default="5.6">Enter Breakdown Voltage (default=5.6)</v_breakdown> + <i_breakdown default="2.0e-2">Enter Breakdown Current (default=2.0e-2)</i_breakdown> + <i_sat default="1.0e-12">Enter Saturation Current (default=1.0e-12)</i_sat> + <n_forward default="1.0">Enter Forward Emission Coefficient (default=1.0)</n_forward> + <limit_switch default="FALSE">Enter Switch for Limiting (default=FALSE)</limit_switch> +</param> +</model> diff --git a/library/modelParamXML/Digital/d_and.xml b/library/modelParamXML/Digital/d_and.xml new file mode 100644 index 00000000..cd4a1c76 --- /dev/null +++ b/library/modelParamXML/Digital/d_and.xml @@ -0,0 +1,12 @@ +<model> +<name>d_and</name> +<type>Digital</type> +<node_number>3</node_number> +<title>Add Parameters for And Gate</title> +<split>2-V:1-NV</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_buffer.xml b/library/modelParamXML/Digital/d_buffer.xml new file mode 100644 index 00000000..e0661910 --- /dev/null +++ b/library/modelParamXML/Digital/d_buffer.xml @@ -0,0 +1,12 @@ +<model> +<name>d_buffer</name> +<type>Digital</type> +<node_number>2</node_number> +<title>Add Parameters for Buffer</title> +<split>None</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_dff.xml b/library/modelParamXML/Digital/d_dff.xml new file mode 100644 index 00000000..d5010e02 --- /dev/null +++ b/library/modelParamXML/Digital/d_dff.xml @@ -0,0 +1,19 @@ +<model> +<name>d_dff</name> +<type>Digital</type> +<node_number>6</node_number> +<title>Add Parameters for D Flipflop</title> +<split>None</split> +<param> + <clk_delay default ="1.0e-9">Enter Clk Delay (default=1.0e-9)</clk_delay> + <set_delay default ="1.0e-9">Enter Set Delay (default=1.0e-9)</set_delay> + <reset_delay default ="1.0">Enter Reset Delay (default=1.0)</reset_delay> + <ic default ="0">Enter IC (default=0)</ic> + <data_load default ="1.0e-12">Enter value for Data Load (default=1.0e-12)</data_load> + <clk_load default ="1.0e-12">Enter value for Clk Load (default=1.0e-12)</clk_load> + <set_load default ="1.0e-12">Enter value for Set Load (default=1.0e-12)</set_load> + <reset_load default ="1.0e-12">Enter value for Reset Load (default=1.0e-12)</reset_load> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_dlatch.xml b/library/modelParamXML/Digital/d_dlatch.xml new file mode 100644 index 00000000..34e26418 --- /dev/null +++ b/library/modelParamXML/Digital/d_dlatch.xml @@ -0,0 +1,20 @@ +<model> +<name>d_dlatch</name> +<type>Digital</type> +<node_number>6</node_number> +<title>Add Parameters for D Latch</title> +<split>None</split> +<param> + <data_delay default ="1.0e-9">Enter Data Delay (default=1.0e-9)</data_delay> + <enable_delay default ="1.0e-9">Enter Enable Delay (default=1.0e-9)</enable_delay> + <set_delay default ="1.0e-9">Enter Set Delay (default=1.0e-9)</set_delay> + <reset_delay default ="1.0e-9">Enter Reset Delay (default=1.0)</reset_delay> + <ic default ="0">Enter IC (default=0)</ic> + <data_load default ="1.0e-12">Enter value for Data Load (default=1.0e-12)</data_load> + <enable_load default ="1.0e-12">Enter value for Enable Load (default=1.0e-12)</enable_load> + <set_load default ="1.0e-12">Enter value for Set Load (default=1.0e-12)</set_load> + <reset_load default ="1.0e-12">Enter value for Reset Load (default=1.0e-12)</reset_load> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_fdiv.xml b/library/modelParamXML/Digital/d_fdiv.xml new file mode 100644 index 00000000..bab4f0d6 --- /dev/null +++ b/library/modelParamXML/Digital/d_fdiv.xml @@ -0,0 +1,15 @@ +<model> +<name>d_fdiv</name> +<type>Digital</type> +<node_number>2</node_number> +<title>Add Parameters for Frequency Divider</title> +<split>None</split> +<param> + <div_factor default ="2">Enter Divide Factor (default=2)</div_factor> + <high_cycles default ="1">Enter value for High Cycles (default=1)</high_cycles> + <i_count default = "0">Enter Initial Count (default=0)</i_count> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <freq_in_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</freq_in_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_inverter.xml b/library/modelParamXML/Digital/d_inverter.xml new file mode 100644 index 00000000..e104712a --- /dev/null +++ b/library/modelParamXML/Digital/d_inverter.xml @@ -0,0 +1,12 @@ +<model> +<name>d_inverter</name> +<type>Digital</type> +<node_number>2</node_number> +<title>Add Parameters for Inverter</title> +<split>None</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_jkff.xml b/library/modelParamXML/Digital/d_jkff.xml new file mode 100644 index 00000000..78ce59cd --- /dev/null +++ b/library/modelParamXML/Digital/d_jkff.xml @@ -0,0 +1,19 @@ +<model> +<name>d_jkff</name> +<type>Digital</type> +<node_number>7</node_number> +<title>Add Parameters for JK Flipflop</title> +<split>None</split> +<param> + <clk_delay default ="1.0e-9">Enter Clk Delay (default=1.0e-9)</clk_delay> + <set_delay default ="1.0e-9">Enter Set Delay (default=1.0e-9)</set_delay> + <reset_delay default ="1.0">Enter Reset Delay (default=1.0)</reset_delay> + <ic default ="0">Enter IC (default=0)</ic> + <jk_load default ="1.0e-12">Enter value for JK Load (default=1.0e-12)</jk_load> + <clk_load default ="1.0e-12">Enter value for Clk Load (default=1.0e-12)</clk_load> + <set_load default ="1.0e-12">Enter value for Set Load (default=1.0e-12)</set_load> + <reset_load default ="1.0e-12">Enter value for Reset Load (default=1.0e-12)</reset_load> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_nand.xml b/library/modelParamXML/Digital/d_nand.xml new file mode 100644 index 00000000..0041419a --- /dev/null +++ b/library/modelParamXML/Digital/d_nand.xml @@ -0,0 +1,12 @@ +<model> +<name>d_nand</name> +<type>Digital</type> +<node_number>3</node_number> +<title>Add Parameters for Nand Gate</title> +<split>2-V:1-NV</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_nor.xml b/library/modelParamXML/Digital/d_nor.xml new file mode 100644 index 00000000..17a60fd5 --- /dev/null +++ b/library/modelParamXML/Digital/d_nor.xml @@ -0,0 +1,12 @@ +<model> +<name>d_nor</name> +<type>Digital</type> +<node_number>3</node_number> +<title>Add Parameters for Nor Gate</title> +<split>2-V:1-NV</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_or.xml b/library/modelParamXML/Digital/d_or.xml new file mode 100644 index 00000000..8362e1b3 --- /dev/null +++ b/library/modelParamXML/Digital/d_or.xml @@ -0,0 +1,12 @@ +<model> +<name>d_or</name> +<type>Digital</type> +<node_number>3</node_number> +<title>Add Parameters for Or Gate</title> +<split>2-V:1-NV</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_pulldown.xml b/library/modelParamXML/Digital/d_pulldown.xml new file mode 100644 index 00000000..affd1745 --- /dev/null +++ b/library/modelParamXML/Digital/d_pulldown.xml @@ -0,0 +1,10 @@ +<model> +<name>d_pulldown</name> +<type>Digital</type> +<node_number>1</node_number> +<title>Add Parameters for Pulldown</title> +<split>None</split> +<param> + <load default="1.0e-12">Enter value of Load</load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_pullup.xml b/library/modelParamXML/Digital/d_pullup.xml new file mode 100644 index 00000000..1ce491ff --- /dev/null +++ b/library/modelParamXML/Digital/d_pullup.xml @@ -0,0 +1,10 @@ +<model> +<name>d_pullup</name> +<type>Digital</type> +<node_number>1</node_number> +<title>Add Parameters for Pullup</title> +<split>None</split> +<param> + <load default="1.0e-12">Enter value of Load</load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_ram.xml b/library/modelParamXML/Digital/d_ram.xml new file mode 100644 index 00000000..73074201 --- /dev/null +++ b/library/modelParamXML/Digital/d_ram.xml @@ -0,0 +1,16 @@ +<model> +<name>d_ram</name> +<type>Digital</type> +<node_number>5</node_number> +<title>Add Parameters for RAM</title> +<split>4-V:4-V:8-V:1-NV:3-V</split> +<param> + <select_value default ="1">Enter Select Value (default=1)</select_value> + <ic default ="2">Enter IC (default=2)</ic> + <read_delay default ="100.0e-9">Enter Read Delay (default=100.0e-9)</read_delay> + <data_load default ="1.0e-12">Enter value for Data Load (default=1.0e-12)</data_load> + <address_load default ="1.0e-12">Enter value for Address Load (default=1.0e-12)</address_load> + <select_load default ="1.0e-12">Enter value for Select Load (default=1.0e-12)</select_load> + <enable_load default ="1.0e-12">Enter value for Enable Load (default=1.0e-12)</enable_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_source.xml b/library/modelParamXML/Digital/d_source.xml new file mode 100644 index 00000000..9bd4347c --- /dev/null +++ b/library/modelParamXML/Digital/d_source.xml @@ -0,0 +1,11 @@ +<model> +<name>d_source</name> +<type>Digital</type> +<node_number>1</node_number> +<title>Add Parameters for Digital Source</title> +<split>4-V</split> +<param> + <input_file default ="source.txt">Enter Input File (default=source.txt)</input_file> + <input_load default ="1.0e-12">Enter Input Load</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_srff.xml b/library/modelParamXML/Digital/d_srff.xml new file mode 100644 index 00000000..9eb65175 --- /dev/null +++ b/library/modelParamXML/Digital/d_srff.xml @@ -0,0 +1,19 @@ +<model> +<name>d_srff</name> +<type>Digital</type> +<node_number>7</node_number> +<title>Add Parameters for SR Flipflop</title> +<split>None</split> +<param> + <clk_delay default ="1.0e-9">Enter Clk Delay (default=1.0e-9)</clk_delay> + <set_delay default ="1.0e-9">Enter Set Delay (default=1.0e-9)</set_delay> + <reset_delay default ="1.0">Enter Reset Delay (default=1.0)</reset_delay> + <ic default ="0">Enter IC (default=0)</ic> + <sr_load default ="1.0e-12">Enter value for SR Load (default=1.0e-12)</sr_load> + <clk_load default ="1.0e-12">Enter value for Clk Load (default=1.0e-12)</clk_load> + <set_load default ="1.0e-12">Enter value for Set Load (default=1.0e-12)</set_load> + <reset_load default ="1.0e-12">Enter value for Reset Load (default=1.0e-12)</reset_load> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_srlatch.xml b/library/modelParamXML/Digital/d_srlatch.xml new file mode 100644 index 00000000..35dbc061 --- /dev/null +++ b/library/modelParamXML/Digital/d_srlatch.xml @@ -0,0 +1,20 @@ +<model> +<name>d_srlatch</name> +<type>Digital</type> +<node_number>7</node_number> +<title>Add Parameters for SR Latch</title> +<split>None</split> +<param> + <sr_delay default ="1.0e-9">Enter SR Delay (default=1.0e-9)</sr_delay> + <enable_delay default ="1.0e-9">Enter Enable Delay (default=1.0e-9)</enable_delay> + <set_delay default ="1.0e-9">Enter Set Delay (default=1.0e-9)</set_delay> + <reset_delay default ="1.0e-9">Enter Reset Delay (default=1.0)</reset_delay> + <ic default ="0">Enter IC (default=0)</ic> + <sr_load default ="1.0e-12">Enter value for SR Load (default=1.0e-12)</sr_load> + <enable_load default ="1.0e-12">Enter value for Enable Load (default=1.0e-12)</enable_load> + <set_load default ="1.0e-12">Enter value for Set Load (default=1.0e-12)</set_load> + <reset_load default ="1.0e-12">Enter value for Reset Load (default=1.0e-12)</reset_load> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_state.xml b/library/modelParamXML/Digital/d_state.xml new file mode 100644 index 00000000..2290a117 --- /dev/null +++ b/library/modelParamXML/Digital/d_state.xml @@ -0,0 +1,16 @@ +<model> +<name>d_state</name> +<type>Digital</type> +<node_number>4</node_number> +<title>Add Parameters for State Machine</title> +<split>4-V:2-NV:8-V</split> +<param> + <clk_delay default ="1.0e-9">Enter Clk Delay (default=1.0e-9)</clk_delay> + <reset_delay default ="1.0e-9">Enter Reset Delay (default=1.0e-9)</reset_delay> + <state_file default ="state.txt">Enter State File (default=state.txt)</state_file> + <reset_state default ="0">Enter Reset Value (default=0)</reset_state> + <input_load default ="1.0e-12">Enter value for Input Load (default=1.0e-12)</input_load> + <clk_load default ="1.0e-12">Enter value for Clk Load (default=1.0e-12)</clk_load> + <reset_load default ="1.0e-12">Enter value for Reset Load (default=1.0e-12)</reset_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_tff.xml b/library/modelParamXML/Digital/d_tff.xml new file mode 100644 index 00000000..ed519d2c --- /dev/null +++ b/library/modelParamXML/Digital/d_tff.xml @@ -0,0 +1,19 @@ +<model> +<name>d_tff</name> +<type>Digital</type> +<node_number>6</node_number> +<title>Add Parameters for T Flipflop</title> +<split>None</split> +<param> + <clk_delay default ="1.0e-9">Enter Clk Delay (default=1.0e-9)</clk_delay> + <set_delay default ="1.0e-9">Enter Set Delay (default=1.0e-9)</set_delay> + <reset_delay default ="1.0">Enter Reset Delay (default=1.0)</reset_delay> + <ic default ="0">Enter IC (default=0)</ic> + <t_load default ="1.0e-12">Enter value for T Load (default=1.0e-12)</t_load> + <clk_load default ="1.0e-12">Enter value for Clk Load (default=1.0e-12)</clk_load> + <set_load default ="1.0e-12">Enter value for Set Load (default=1.0e-12)</set_load> + <reset_load default ="1.0e-12">Enter value for Reset Load (default=1.0e-12)</reset_load> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_tristate.xml b/library/modelParamXML/Digital/d_tristate.xml new file mode 100644 index 00000000..2835da30 --- /dev/null +++ b/library/modelParamXML/Digital/d_tristate.xml @@ -0,0 +1,12 @@ +<model> +<name>d_tristate</name> +<type>Digital</type> +<node_number>3</node_number> +<title>Add Parameters for Tristate Buffer</title> +<split>None</split> +<param> + <delay default ="1.0e-9">Enter Delay (default=1.0e-9)</delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> + <enable_load default ="1.0e-12">Enter Enable Load (default=1.0e-12)</enable_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_xnor.xml b/library/modelParamXML/Digital/d_xnor.xml new file mode 100644 index 00000000..4b27bc4c --- /dev/null +++ b/library/modelParamXML/Digital/d_xnor.xml @@ -0,0 +1,12 @@ +<model> +<name>d_xnor</name> +<type>Digital</type> +<node_number>3</node_number> +<title>Add Parameters for Xnor Gate</title> +<split>2-V:1-NV</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Digital/d_xor.xml b/library/modelParamXML/Digital/d_xor.xml new file mode 100644 index 00000000..ab238c6d --- /dev/null +++ b/library/modelParamXML/Digital/d_xor.xml @@ -0,0 +1,12 @@ +<model> +<name>d_xor</name> +<type>Digital</type> +<node_number>3</node_number> +<title>Add Parameters for Xor Gate</title> +<split>2-V:1-NV</split> +<param> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> + <input_load default ="1.0e-12">Enter Input Load (default=1.0e-12)</input_load> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/adc_bridge_1.xml b/library/modelParamXML/Hybrid/adc_bridge_1.xml new file mode 100644 index 00000000..8d84cd01 --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_1.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>1-V:1-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model> diff --git a/library/modelParamXML/Hybrid/adc_bridge_2.xml b/library/modelParamXML/Hybrid/adc_bridge_2.xml new file mode 100644 index 00000000..1e0ced95 --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_2.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>2-V:2-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/adc_bridge_3.xml b/library/modelParamXML/Hybrid/adc_bridge_3.xml new file mode 100644 index 00000000..09d41850 --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_3.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>3-V:3-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/adc_bridge_4.xml b/library/modelParamXML/Hybrid/adc_bridge_4.xml new file mode 100644 index 00000000..b29201f5 --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_4.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>4-V:4-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/adc_bridge_5.xml b/library/modelParamXML/Hybrid/adc_bridge_5.xml new file mode 100644 index 00000000..bdacf1db --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_5.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>5-V:5-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/adc_bridge_6.xml b/library/modelParamXML/Hybrid/adc_bridge_6.xml new file mode 100644 index 00000000..ee60247f --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_6.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>6-V:6-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/adc_bridge_7.xml b/library/modelParamXML/Hybrid/adc_bridge_7.xml new file mode 100644 index 00000000..df96b366 --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_7.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>7-V:7-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/adc_bridge_8.xml b/library/modelParamXML/Hybrid/adc_bridge_8.xml new file mode 100644 index 00000000..cdd7afaa --- /dev/null +++ b/library/modelParamXML/Hybrid/adc_bridge_8.xml @@ -0,0 +1,13 @@ +<model> +<name>adc_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for ADC</title> +<split>8-V:8-V</split> +<param> + <in_low default ="1.0">Enter value for in_low (default=1.0)</in_low> + <in_high default ="2.0">Enter value for in_high (default=2.0)</in_high> + <rise_delay default ="1.0e-9">Enter Rise Delay (default=1.0e-9)</rise_delay> + <fall_delay default ="1.0e-9">Enter Fall Delay (default=1.0e-9)</fall_delay> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/dac_bridge_1.xml b/library/modelParamXML/Hybrid/dac_bridge_1.xml new file mode 100644 index 00000000..c9e4eed1 --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_1.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>1-V:1-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model> diff --git a/library/modelParamXML/Hybrid/dac_bridge_2.xml b/library/modelParamXML/Hybrid/dac_bridge_2.xml new file mode 100644 index 00000000..c67b22bf --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_2.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>2-V:2-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/dac_bridge_3.xml b/library/modelParamXML/Hybrid/dac_bridge_3.xml new file mode 100644 index 00000000..d080f94d --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_3.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>3-V:3-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/dac_bridge_4.xml b/library/modelParamXML/Hybrid/dac_bridge_4.xml new file mode 100644 index 00000000..988b575a --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_4.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>4-V:4-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/dac_bridge_5.xml b/library/modelParamXML/Hybrid/dac_bridge_5.xml new file mode 100644 index 00000000..39d8f2d2 --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_5.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>5-V:5-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/dac_bridge_6.xml b/library/modelParamXML/Hybrid/dac_bridge_6.xml new file mode 100644 index 00000000..2016f971 --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_6.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>6-V:6-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/dac_bridge_7.xml b/library/modelParamXML/Hybrid/dac_bridge_7.xml new file mode 100644 index 00000000..37fb936b --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_7.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>7-V:7-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Hybrid/dac_bridge_8.xml b/library/modelParamXML/Hybrid/dac_bridge_8.xml new file mode 100644 index 00000000..72644ad9 --- /dev/null +++ b/library/modelParamXML/Hybrid/dac_bridge_8.xml @@ -0,0 +1,15 @@ +<model> +<name>dac_bridge</name> +<type>Hybrid</type> +<node_number>2</node_number> +<title>Add Parameters for DAC</title> +<split>8-V:8-V</split> +<param> + <out_low default ="0.0">Enter value for out_low (default=0.0)</out_low> + <out_high default ="5.0">Enter value for out_high (default=5.0)</out_high> + <out_undef default ="0.5">Enter value for out_undef (default=0.5)</out_undef> + <input_load default ="1.0e-12">Enter value for input load (default=1.0e-12)</input_load> + <t_rise default ="1.0e-9">Enter the Rise Time (default=1.0e-9)</t_rise> + <t_fall default ="1.0e-9">Enter the Fall Time (default=1.0e-9)</t_fall> +</param> +</model>
\ No newline at end of file diff --git a/library/modelParamXML/Nghdl/.gitignore b/library/modelParamXML/Nghdl/.gitignore new file mode 100644 index 00000000..86d0cb27 --- /dev/null +++ b/library/modelParamXML/Nghdl/.gitignore @@ -0,0 +1,4 @@ +# Ignore everything in this directory +* +# Except this file +!.gitignore
\ No newline at end of file |