diff options
Diffstat (limited to 'Windows/spice/share/man')
| -rw-r--r-- | Windows/spice/share/man/man1/ngmultidec.1 | 105 | ||||
| -rw-r--r-- | Windows/spice/share/man/man1/ngnutmeg.1 | 83 | ||||
| -rw-r--r-- | Windows/spice/share/man/man1/ngsconvert.1 | 126 | ||||
| -rw-r--r-- | Windows/spice/share/man/man1/ngspice.1 | 152 |
4 files changed, 0 insertions, 466 deletions
diff --git a/Windows/spice/share/man/man1/ngmultidec.1 b/Windows/spice/share/man/man1/ngmultidec.1 deleted file mode 100644 index 617ed32d..00000000 --- a/Windows/spice/share/man/man1/ngmultidec.1 +++ /dev/null @@ -1,105 +0,0 @@ -.TH NGMULTIDEC 1 ngpice -.SH NAME -ngmultidec \- make ngpice sub-circuit for coupled transmission lines -.SH SYNOPSIS -.B ngmultidec -[ -.IR options ... -] -.SH DESCRIPTION -.I ngmultidec -writes an ngspice input file to standard output which describes a sub-circuit for coupled lines -using uncoupled simple lossy lines. -.LP -Each generated subcircuit models a 4-conductor transmission line with -the following parameters: length -.IR l , -line capacitance -.IR c , -line resistance -.IR r , -line conductance -.IR g , -inductive_coeff_of_coupling -.IR k , -inter-line capacitance -.IR cm , -length -.IR l . -Derived parameters are: -.IR lm , -.IR ctot . -The values of -.IR l , -.IR c , -the model name, the number of conductors and the length of the line -must be specified. -.LP -It is important to note that the model is a simplified one - the -following assumptions are made: 1. The self-inductance l, the -self-capacitance ctot (note: not c), the series resistance r and the -parallel capacitance g are the same for all lines, and 2. Each line -is coupled only to the two lines adjacent to it, with the same -coupling parameters cm and lm. -The first assumption implies that edge effects have to be neglected. -The utility of these assumptions is -that they make the sL+R and sC+G matrices symmetric, tridiagonal and -Toeplitz, with useful consequences (see the paper referenced below). -.LP -It may be noted that a symmetric two-conductor line is -represented accurately by this model. -.LP -Standard C language scientific (exponent) notation may be used for options' numeric values. -.SH OPTIONS -.TP -.BI \-o "subcircuit_name" -Set the subcircuit name -.TP -.BI \-l "line_inductance" -Set the line inductance. -.TP -.BI \-c "line_capacitance" -Set the line capacitance. -.TP -.BI \-r "line_resistance" -Set the line resistance. -.TP -.BI \-g "line_conductance" -Set the line conductance. -.TP -.BI \-k "inductive_coefficient_of_coupling" -Set the value of the inductive coefficient of coupling, whose -absolute value -.I k -must be less than 1.0. -.TP -.BI \-x "line-to-line-capacitance" -Set the line-to-line capacitance. -.TP -.BI \-L "length" -Set the length of the line. -.TP -.BI \-n "number" -Set the number of conductors. -.TP -.B \-u -Write a usage message to standard error. -.SH EXAMPLE -.RS -.B ngmultidec -n4 -l9e9 -c20e-12 -r5.3 -x5e12 -k0.7 -otest -L5.4 > test.cir -.RE -.SH SEE ALSO -.nf -.IR "Efficient Transient Simulation of Lossy Interconnect" , -J.S. Roychowdhury and D.O. Pederson, -Proceedings of the Design Automation Conference, -pp. 740-745. -1991. -.B http://portal.acm.org/citation.cfm?doid=127601.127762 -.fi -.sp -.IR ngnutmeg (1), -.IR ngproc2mod (1), -.IR ngsconvert (1), -.IR ngspice (1), -.IR nghelp (1). diff --git a/Windows/spice/share/man/man1/ngnutmeg.1 b/Windows/spice/share/man/man1/ngnutmeg.1 deleted file mode 100644 index bafc122b..00000000 --- a/Windows/spice/share/man/man1/ngnutmeg.1 +++ /dev/null @@ -1,83 +0,0 @@ -.\" Copyright (c) 1985 Wayne A. Christopher, U. C. Berkeley CAD Group -.ig - -(woman-find-file buffer-file-name) - -(let* ((man-args (concat "-l " buffer-file-name)) - (bufname (concat "*Man " man-args "*"))) - (when (get-buffer bufname) - (kill-buffer bufname)) - (man man-args)) - -(compile - (concat "groff -t -e -man -Tps " - buffer-file-name - " > /tmp/tmp.ps && gv /tmp/tmp.ps")) - -.. -.TH NGNUTMEG 1 "6 June 2010" -.ds = \-\^\- -.ds ngspice \s-2NGSPICE\s+2 -.SH "NAME" -ngnutmeg \- ngspice post-processor -.SH "SYNOPSIS" -\fBngnutmeg\fP [\fIoptions\fP] [\fIdatafile\fP ...] -.SH "DESCRIPTION" -This man page is just a small overview. -The primary documentation of ngspice is in the \*[ngspice] User's Manual, -which is available as a pdf file. -.br -\fBngnutmeg\fP is a post processor for \*[ngspice] \- it takes -the raw output file created by \fBngspice \-r\fP -and plots the data on a graphics terminal or a workstation display. -Note that the raw output file is different from the -data that \*[ngspice] writes to the standard output. -.SH "OPTIONS" -.TP -\fB\-\fP -.br -Don't try to load the default data file ("rawspice") if no other files -are given. -.TP -\fB\-n\fP or \fB\*=no\-spiceinit\fP -Don't try to source the file ".spiceinit" upon startup. Normally \fBngnutmeg\fP -tries to find the file in the current directory, and if it is not found then -in the user's home directory. -.TP -\fB\-q\fP or \fB\*=completion\fP -Enable command completion. (defect) -.TP -\fB\-t\fP \fIterm\fP or \fB\*=term=\fP\fIterm\fP -The program is being run on a terminal with \fBmfb\fP name \fIterm\fP. -.TP -\fB\-h\fP or \fB\*=help\fP -Display a verbose help on the arguments available to the program. -.TP -\fB\-v\fP or \fB\*=version\fP -Display a version number and copyright information of the program. -.PP -Further arguments are taken to be data files in binary or ascii format -(see \fBsconvert\fP(1)) which are loaded into ngnutmeg. -If the file -is in binary format, it may be only partially completed (useful for -examining \*[ngspice] output before the simulation is finished). -One file may contain any number of data sets from different analyses. -.SH "ENVIRONMENT" -See ngspice(1) -.SH "FILES" -See ngspice(1) -.SH "SEE ALSO" -sconvert(1), ngspice(1), mfb(3), writedata(3), and -.br -\*[ngspice] User's Manual at \fBhttp://ngspice.sourceforge.net/docs.html\fP -.SH "BUGS" -Please report bugs to the ngspice project via -.br -\fBhttp://ngspice.sourceforge.net/bugrep.html\fP -.SH "AUTHOR" -Wayne Christopher (faustus@cad.berkeley.edu) -.br -\fBngspice\fP: various authors (see \fBhttp://sourceforge.net/projects/ngspice/\fP) -.\" Local Variables: -.\" mode: nroff -.\" End: diff --git a/Windows/spice/share/man/man1/ngsconvert.1 b/Windows/spice/share/man/man1/ngsconvert.1 deleted file mode 100644 index 55f72967..00000000 --- a/Windows/spice/share/man/man1/ngsconvert.1 +++ /dev/null @@ -1,126 +0,0 @@ -.\" Copyright (c) 1985 Wayne A. Christopher, U. C. Berkeley CAD Group -.TH SCONVERT 1 "20 March 1986" -.UC 4 -.SH NAME -sconvert \- convert spice formats -.SH SYNOPSIS -.B sconvert fromtype fromfile totype tofile -.br -.B sconvert fromtype totype -.br -.B sconvert -.br -.SH DESCRIPTION -.B Sconvert -translates spice output files among three formats: the old -binary format, a new binary format, and a new ascii format. -The formats are specified by the -.B fromtype -and -.B totype -arguments: `o' for the old format, `b' for the new binary format, -and `a' for the new ascii format. -.B Fromtype -specifies the format to be read, and -.B totype -specifies the format to be written. -If -.B fromfile -and -.B tofile -are given, then they are used as the input and output, otherwise -standard input and output are used. -(Note that this second option is only available on \s-2UNIX\s+2 systems -\- on VMS and other systems you must supply the filenames.) -If no arguments are given, the parameters are prompted for. -.PP -Binary format is the preferred format for general use, as it is -the most economical in terms of space and speed of access, and ascii is -provided to make it easy to modify data files and transfer them -between machines with different floating-point formats. -The old format is provided only -for backward compatibility. -The three formats are as follows: -.br -.nf - -.B Old: - - What Size in Bytes - - title 80 - date 8 - time 8 - numoutputs 2 - the integer 4 2 - variable names -- - char[numoutputs][8] numoutputs * 8 - types of output numoutputs * 2 - node index numoutputs * 2 - plot title numoutputs * 24 - the actual data numpoints * numoutputs * 8 - -.B Ascii: - - Title: \fITitle Card String\fR - Date: \fIDate\fR - [ Plotname: \fIPlot Name\fR - Flags: \fIcomplex\fR or \fIreal\fR - No. Variables: \fInumoutputs\fR - No. Points: \fInumpoints\fR - Command: \fInutmeg command\fR - Variables: 0 \fIvarname1\fR \fItypename1\fR - 1 \fIvarname2\fR \fItypename2\fR - etc... - Values: - 0 n n n n ... - 1 n n n n ... - And so forth... - ] repeated one or more times -.fi -.PP -If one of the flags is \fIcomplex\fR, the points look like r,i where r and i -are floating point (in %e format). -Otherwise they are in %e format. -Only one of \fIreal\fR and \fIcomplex\fR should appear. -.PP -The lines are guaranteed to be less than 80 columns wide (unless the -plot title or variable names are very long), so this format is safe -to mail between systems like CMS. -.PP -Any number of \fBCommand:\fR lines may appear between the \fBNo. Points:\fR -and the \fBVariables:\fR lines, and whenever the plot is loaded into -\fBnutmeg\fR they will be executed. -.nf - -.B Binary: - - \fITitle Card\fR (a NULL terminated string) - \fIDate, Time\fR (a NULL terminated string) - [ - \fIPlot title\fR (a NULL terminated string) - \fINumber of variables\fR (an int) - \fINumber of data points\fR (an int) - \fIflags\fR (a short) - \fIvariable header struct\fR (repeated numoutputs times) - \fIvariable name\fR (a NULL terminated string) - \fIvariable type\fR (an int) - \fIset of outputs\fR (repeated numpoints times) - ] repeated one or more times. -.fi -.PP -A set of outputs is a vector of doubles of length numoutputs, or -a vector of real-imaginary pairs of doubles if the data is complex. -.SH "SEE ALSO" -nutmeg(1), spice(1), writedata(3) -.SH AUTHOR -Wayne Christopher (faustus@cad.berkeley.edu) -.SH BUGS -If variable names and the title -and plotname strings have trailing -blanks in them they will be stripped off when the file is read, if -it is in ascii format. -.PP -If a plot title begins with "Title:" \fBnutmeg\fR will be fooled into thinking -that this is an ascii format file. -\fBSconvert\fR always requires the type to be specified, however. diff --git a/Windows/spice/share/man/man1/ngspice.1 b/Windows/spice/share/man/man1/ngspice.1 deleted file mode 100644 index cd5e31db..00000000 --- a/Windows/spice/share/man/man1/ngspice.1 +++ /dev/null @@ -1,152 +0,0 @@ -.\" Copyright (c) 1985 Wayne A. Christopher, U. C. Berkeley CAD Group -.ig - -(woman-find-file buffer-file-name) - -(let* ((man-args (concat "-l " buffer-file-name)) - (bufname (concat "*Man " man-args "*"))) - (when (get-buffer bufname) - (kill-buffer bufname)) - (man man-args)) - -(compile (concat "groff -t -e -man -Tps " - buffer-file-name - " > /tmp/tmp.ps && gv /tmp/tmp.ps")) - -.. -.TH NGSPICE 1 "6 June 2010" -.ds = \-\^\- -.ds ngspice \s-2NGSPICE\s+2 -.SH "NAME" -ngspice \- circuit simulator derived from SPICE3f5 -.SH "SYNOPSIS" -\fBngspice\fP [\fIoptions\fP] [\fIfile\fP ...] -.SH "DESCRIPTION" -This man page is just a small overview. -The primary documentation of ngspice is in the \*[ngspice] User's Manual, -which is available as a pdf file. -.SH "OPTIONS" -.TP -\fB\-n\fP or \fB\*=no\-spiceinit\fP -Don't try to source the file ".spiceinit" upon startup. Normally \*[ngspice] -tries to find the file in the current directory, and if it is not found then -in the user's home directory. -.TP -\fB\-q\fP or \fB\*=completion\fP -Enable command completion. (defect) -.TP -\fB\-t\fP \fIterm\fP or \fB\*=term=\fP\fIterm\fP -The program is being run on a terminal with \fBmfb\fP name \fIterm\fP. -.TP -\fB\-b\fP or \fB\*=batch\fP -Run in batch mode. -\*[ngspice] will read the standard input or the specified -input file and do the simulation. -Note that if the standard input is not a terminal, \*[ngspice] will default -to batch mode, unless the \-i flag is given. -.TP -\fB\-s\fP or \fB\*=server\fP -Run in server mode. -This is like batch mode, except that a temporary rawfile is used and then -written to the standard output, preceded by a line with a single "@", after -the simulation is done. -This mode is used by the ngspice daemon. -.TP -\fB\-i\fP or \fB\*=interactive\fP -Run in interactive mode. -This is useful if the standard input is not a terminal but interactive mode -is desired. -Command completion is not available unless the standard input is a terminal, -however. -.TP -\fB\-r\fP \fIrawfile\fP or \fB\*=rawfile=\fP\fIfile\fP -Use \fIrawfile\fP as the default file into which the results of -the simulation are saved. -.TP -\fB\-c\fP \fIcircuitfile\fP or \fB\*=circuitfile=\fP\fIcircuitfile\fP -Use \fIcircuitfile\fP as the default input deck. -.TP -\fB\-h\fP or \fB\*=help\fP -Display a verbose help on the arguments available to the program. -.TP -\fB\-v\fP or \fB\*=version\fP -Display a version number and copyright information of the program. -.TP -\fB\-a\fP or \fB\*=autorun\fP -FIXME -.TP -\fB\-o\fP \fIoutfile\fP or \fB\*=output=\fP\fIoutfile\fP -All logs generated during a batch run (\fB\-b\fP) will be saved in \fIoutfile\fP. -.TP -\fB\-p\fP or \fB\*=pipe\fP -Allow a program (e.g., xcircuit) to act as a GUI frontend for -ngspice through a pipe. -Thus ngspice will assume that the pipe is a tty and allows one to run in -interactive mode. -.PP -Further arguments are taken to be SPICE input decks, which are read -and saved. -(If batch mode is requested then they are run immediately.) -.SH "ENVIRONMENT" -.TP -\fBSPICE_LIB_DIR\fP -.TP -\fBSPICE_EXEC_DIR\fP -.TP -\fBSPICE_HOST\fP -.TP -\fBSPICE_BUGADDR\fP -.TP -\fBSPICE_EDITOR\fP -.TP -\fBSPICE_ASCIIRAWFILE\fP default \fI0\fP -Format of the rawfile. -\fI0\fP for binary, and \fI1\fP for ascii. -.TP -\fBSPICE_NEWS\fP default \fI$SPICE_LIB_DIR/news\fP -A file which is copied verbatim to stdout when ngspice starts in interactive mode. -.TP -\fBSPICE_MFBCAP\fP default \fI$SPICE_LIB_DIR/mfbcap\fP -.TP -\fBSPICE_HELP_DIR\fP default \fI$SPICE_LIB_DIR/helpdir\fP -.TP -\fBSPICE_SCRIPTS\fP default \fI$SPICE_LIB_DIR/scripts\fP -In this directory the \fIspinit\fP file will be searched. -.TP -\fBSPICE_PATH\fP default \fI$SPICE_EXEC_DIR/ngspice\fP -.PP -various undocumented ngspice centric environment variables : -.TP -\fBNGSPICE_MEAS_PRECISION\fP -.TP -\fBSPICE_NO_DATASEG_CHECK\fP -.PP -Common environment variables : -.TP -\fBTERM\fP \fBLINES\fP \fBCOLS\fP \fBDISPLAY\fP \fBHOME\fP \fBPATH\fP \fBEDITOR\fP \fBSHELL\fP -.TP -\fBPOSIXLY_CORRECT\fP -.SH "FILES" -.TP -\fI$SPICE_LIB_DIR/scripts/spinit\fP -The System's Initialisation File. -.TP -\fI\&.spiceinit\fP or \fI$HOME/.spiceinit\fP -The User's Initialisation File. -.SH "SEE ALSO" -sconvert(1), ngnutmeg(1), mfb(3), writedata(3), and -.br -\*[ngspice] User's Manual at \fBhttp://ngspice.sourceforge.net/docs.html\fP -.SH "BUGS" -Please report bugs to the ngspice project via -.br -\fBhttp://ngspice.sourceforge.net/bugrep.html\fP -.SH "AUTHORS" -\fBspice3\fP: Tom Quarles (quarles@cad.berkeley.edu) -.br -\fBnutmeg\fP: User interface: Wayne Christopher (faustus@cad.berkeley.edu) -.br -\fBngspice\fP: various authors (see \fBhttp://sourceforge.net/projects/ngspice/\fP) -.\" Local Variables: -.\" mode: nroff -.\" End: |