removed outdated dependencies

3 files changed, 0 insertions, 81 deletions

diff --git a/Windows/spice/examples/numparam/example.cir b/Windows/spice/examples/numparam/example.cir
deleted file mode 100644
index 6e13bc06..00000000
--- a/Windows/spice/examples/numparam/example.cir
+++ /dev/null
@@ -1,16 +0,0 @@
-* Param-example
-.param amplitude= 1V
-
-.subckt myfilter in out rval=100k  cval=100nF
-Ra in p1   {2*rval}
-Rb p1 out  {2*rval}
-C1 p1 0    {2*cval}
-Ca in p2   {cval}
-Cb p2 out  {cval}
-R1 p2 0    {rval}
-.ends myfilter
-
-X1 input output myfilter rval=1k cval=1n
-V1 input 0 AC {amplitude}
-
-.end
diff --git a/Windows/spice/examples/numparam/pin.mod b/Windows/spice/examples/numparam/pin.mod
deleted file mode 100644
index b035cd2f..00000000
--- a/Windows/spice/examples/numparam/pin.mod
+++ /dev/null
@@ -1,33 +0,0 @@
-* PIN model
-* line 2
-* line 3
-* -- Summary -------------------------------
-* This is a simple spice model of a PIN diode.
-*
-* -- Description ---------------------------
-* It is a three node device; one input node (relative to ground) and two
-* output nodes (cathode and anode)
-*
-
-* -- Model ----------------------------------
-.subckt	SIMPLE_PIN input cathode anode resp=0.5
-
-* Input photocurrent is modled by a voltage
-* This generates a current using a linear voltage-controlled current source
-Gin    dk  da  input  0  {resp}
-Rin	 input  0   1G
-Cin  input  0   {resp}
-
-* The pn-junction that generates this photocurrent in the real device is modelled 
-* here by a simple diode
-Dpn da dk  pndiode
-
-* terminal resistances
-Ra	anode   da  0.001ohm
-Rk  cathode dk  0.001ohm
-
-* subsircuit models:
-.MODEL pndiode D IS=0.974p RS=0.1 N=1.986196 BV=7.1 IBV=0.1n 
-+ CJO=99.2p VJ=0.455536 M=0.418717 TT=500n
-
-.ends
diff --git a/Windows/spice/examples/numparam/pintest.cir b/Windows/spice/examples/numparam/pintest.cir
deleted file mode 100644
index 80702e14..00000000
--- a/Windows/spice/examples/numparam/pintest.cir
+++ /dev/null
@@ -1,32 +0,0 @@
-* Test circuit for pin.mod
-
-*.include C:\Spice\tests\numparam\pin.mod
-.include pin.mod
-
-* Photodiode supply
-Vbias 	psu  0  10V
-
-* Light input is modeled by a voltage source that we can vary
-Vlight	input  0  2mW
-
-* The pin diode
-Xpin  input cathode anode SIMPLE_PIN resp=0.7
-
-* monitor resistor
-Rmon  anode  0  1ohm 
-
-* Quench restistor
-Rq  psu cathode 1k
-
-*.dc vlight 0 5mW 0.01mW
-
-.dc vlight 0 10mW 0.01mW
-
-.control
-dc vlight 0 10mW 0.01mW
-*write pintest.raw all
-plot V(anode)
-.endc
-
-.end
-