From 369c257b9ae0320621b43ca75b38ff66cc13f37b Mon Sep 17 00:00:00 2001
From: yash1112
Date: Mon, 19 Jun 2017 05:40:46 +0530
Subject: 1.3 new scilab-arduino functions added2. all functions have been
 tested on hardware 3. 5 i2c library functions added 4. Now generates code for
 27 Boards(arduino and lilypad). 5. New GUI

---
 src/c/scilab-arduino/includes/cmd_analog_in_volt.h | 28 ++++++++++++++++++++
 .../scilab-arduino/includes/cmd_analog_out_volt.h  | 27 +++++++++++++++++++
 .../scilab-arduino/includes/cmd_dcmotor_release.h  | 30 ++++++++++++++++++++++
 src/c/scilab-arduino/includes/cmd_dcmotor_run.h    |  2 +-
 src/c/scilab-arduino/includes/cmd_dcmotor_setup.h  |  2 +-
 src/c/scilab-arduino/includes/cmd_i2c_dev.h        | 16 ++++++++++++
 src/c/scilab-arduino/includes/cmd_i2c_read.h       | 16 ++++++++++++
 .../includes/cmd_i2c_read_register.h               | 16 ++++++++++++
 src/c/scilab-arduino/includes/cmd_i2c_write.h      | 16 ++++++++++++
 .../includes/cmd_i2c_write_register.h              | 16 ++++++++++++
 10 files changed, 167 insertions(+), 2 deletions(-)
 create mode 100644 src/c/scilab-arduino/includes/cmd_analog_in_volt.h
 create mode 100644 src/c/scilab-arduino/includes/cmd_analog_out_volt.h
 create mode 100644 src/c/scilab-arduino/includes/cmd_dcmotor_release.h
 create mode 100644 src/c/scilab-arduino/includes/cmd_i2c_dev.h
 create mode 100644 src/c/scilab-arduino/includes/cmd_i2c_read.h
 create mode 100644 src/c/scilab-arduino/includes/cmd_i2c_read_register.h
 create mode 100644 src/c/scilab-arduino/includes/cmd_i2c_write.h
 create mode 100644 src/c/scilab-arduino/includes/cmd_i2c_write_register.h

(limited to 'src/c/scilab-arduino/includes')

diff --git a/src/c/scilab-arduino/includes/cmd_analog_in_volt.h b/src/c/scilab-arduino/includes/cmd_analog_in_volt.h
new file mode 100644
index 0000000..ec47142
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_analog_in_volt.h
@@ -0,0 +1,28 @@
+/* Copyright (C) 2017 - IIT Bombay - FOSSEE
+
+ This file must be used under the terms of the CeCILL.
+ This source file is licensed as described in the file COPYING, which
+ you should have received as part of this distribution.  The terms
+ are also available at
+ http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+ Author: Yash Pratap Singh Tomar 
+ Organization: FOSSEE, IIT Bombay
+ Email: toolbox@scilab.in
+*/
+
+#ifndef __CMD_ANALOG_IN_VOLT_H__
+#define __CMD_ANALOG_IN_VOLT_H__
+ 
+#include "types.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+	
+float u8cmd_analog_in_volts(uint8 board_no, uint8 pin);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_ANALOG_IN_VOLT_H__ */
diff --git a/src/c/scilab-arduino/includes/cmd_analog_out_volt.h b/src/c/scilab-arduino/includes/cmd_analog_out_volt.h
new file mode 100644
index 0000000..51580fb
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_analog_out_volt.h
@@ -0,0 +1,27 @@
+/* Copyright (C) 2017 - IIT Bombay - FOSSEE
+
+ This file must be used under the terms of the CeCILL.
+ This source file is licensed as described in the file COPYING, which
+ you should have received as part of this distribution.  The terms
+ are also available at
+ http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+ Author: Yash Pratap Singh Tomar
+ Organization: FOSSEE, IIT Bombay
+ Email: toolbox@scilab.in
+*/
+
+#ifndef __CMD_ANALOG_OUT_VOLT_H__
+#define __CMD_ANALOG_OUT_VOLT_H__
+ 
+#include "types.h"
+#ifdef  __cplusplus
+extern "C" {
+#endif
+	
+void u8cmd_analog_out_volts(uint8 board_no, uint8 pin, float value);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_ANALOG_OUT_VOLT_H__ */
diff --git a/src/c/scilab-arduino/includes/cmd_dcmotor_release.h b/src/c/scilab-arduino/includes/cmd_dcmotor_release.h
new file mode 100644
index 0000000..d185fb5
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_dcmotor_release.h
@@ -0,0 +1,30 @@
+/* Copyright (C) 2017 - IIT Bombay - FOSSEE
+
+ This file must be used under the terms of the CeCILL.
+ This source file is licensed as described in the file COPYING, which
+ you should have received as part of this distribution.  The terms
+ are also available at
+ http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+ Author: Yash Pratap Singh Tomar
+ Organization: FOSSEE, IIT Bombay
+ Email: toolbox@scilab.in
+*/
+
+#ifndef __CMD_DCMOTOR_RELEASE_H__
+#define __CMD_DCMOTOR_RELEASE_H__
+ 
+#include "types.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4];
+	
+void u8cmd_dcmotor_releases(uint8 board_no, uint8 motor_no);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_DCMOTOR_RELEASE_H__ */
diff --git a/src/c/scilab-arduino/includes/cmd_dcmotor_run.h b/src/c/scilab-arduino/includes/cmd_dcmotor_run.h
index 2b69c99..1b5d41c 100644
--- a/src/c/scilab-arduino/includes/cmd_dcmotor_run.h
+++ b/src/c/scilab-arduino/includes/cmd_dcmotor_run.h
@@ -22,7 +22,7 @@ extern "C" {
 
 extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4];
 	
-void u8cmd_dc_motor_runs(uint8 board_no, uint8 motor_no, int16 duty);
+void u8cmd_dcmotor_runs(uint8 board_no, uint8 motor_no, int16 duty);
 
 #ifdef  __cplusplus
 } /* extern "C" */
diff --git a/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h b/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h
index cecd465..45854ff 100644
--- a/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h
+++ b/src/c/scilab-arduino/includes/cmd_dcmotor_setup.h
@@ -22,7 +22,7 @@ extern "C" {
 
 extern uint8 dcm_pin_1[4], dcm_pin_2[4], dcm_mode[4];
 	
-void u8cmd_dc_motor_setups(uint8 board_no, uint8 driver_type, uint8 motor_no,\
+void u8cmd_dcmotor_setups(uint8 board_no, uint8 driver_type, uint8 motor_no,\
 							uint8 pin_1, uint8 pin_2);
 
 #ifdef  __cplusplus
diff --git a/src/c/scilab-arduino/includes/cmd_i2c_dev.h b/src/c/scilab-arduino/includes/cmd_i2c_dev.h
new file mode 100644
index 0000000..861a8e7
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_i2c_dev.h
@@ -0,0 +1,16 @@
+#ifndef __CMD_I2C_DEV_H__
+#define __CMD_I2C_DEV_H__
+ 
+#include "types.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+	
+uint8 u8cmd_i2c_devs(uint8 address);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_I2C_DEV_H__ */
diff --git a/src/c/scilab-arduino/includes/cmd_i2c_read.h b/src/c/scilab-arduino/includes/cmd_i2c_read.h
new file mode 100644
index 0000000..791bdd3
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_i2c_read.h
@@ -0,0 +1,16 @@
+#ifndef __CMD_I2C_READ_H__
+#define __CMD_I2C_READ_H__
+ 
+#include "types.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+	
+float u8cmd_i2c_reads(uint8 address, uint8 bytes);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_I2C_READ_H__ */
diff --git a/src/c/scilab-arduino/includes/cmd_i2c_read_register.h b/src/c/scilab-arduino/includes/cmd_i2c_read_register.h
new file mode 100644
index 0000000..ea203ad
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_i2c_read_register.h
@@ -0,0 +1,16 @@
+#ifndef __CMD_I2C_READ_REGISTER_H__
+#define __CMD_I2C_READ_REGISTER_H__
+ 
+#include "types.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+	
+uint16 u8cmd_i2c_read_registers(uint8 address, uint8 reg_adrs);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_I2C_READ_REGISTER_H__ */
diff --git a/src/c/scilab-arduino/includes/cmd_i2c_write.h b/src/c/scilab-arduino/includes/cmd_i2c_write.h
new file mode 100644
index 0000000..6a57222
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_i2c_write.h
@@ -0,0 +1,16 @@
+#ifndef __CMD_I2C_WRITE_H__
+#define __CMD_I2C_WRITE_H__
+ 
+#include "types.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+	
+void u8cmd_i2c_writes(uint8 address, uint8 data);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_I2C_WRITE_H__ */
diff --git a/src/c/scilab-arduino/includes/cmd_i2c_write_register.h b/src/c/scilab-arduino/includes/cmd_i2c_write_register.h
new file mode 100644
index 0000000..ff1b9ec
--- /dev/null
+++ b/src/c/scilab-arduino/includes/cmd_i2c_write_register.h
@@ -0,0 +1,16 @@
+#ifndef __CMD_I2C_WRITE_REGISTER_H__
+#define __CMD_I2C_WRITE_REGISTER_H__
+ 
+#include "types.h"
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+	
+void u8cmd_i2c_write_registers(uint8 address, uint8 reg_adrs, uint8 data);
+
+#ifdef  __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __CMD_I2C_WRITE_REGISTER_H__ */
-- 
cgit