From 9e5793a7b05b23e6044a6d7a9ddd5db39ba375f0 Mon Sep 17 00:00:00 2001
From: yash1112
Date: Fri, 7 Jul 2017 21:20:49 +0530
Subject: sci2c arduino updated

---
 2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci | 51 +++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci

(limited to '2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci')

diff --git a/2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci b/2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci
new file mode 100644
index 00000000..e707d4fa
--- /dev/null
+++ b/2.3-1/macros/Hardware/AVR/AVRDigitalSetup.sci
@@ -0,0 +1,51 @@
+// Copyright (C) 2017 - IIT Bombay - FOSSEE
+//
+// This file must be used under the terms of the CeCILL.
+// This source file is licensed as described in the file COPYING, which
+// you should have received as part of this distribution.  The terms
+// are also available at
+// http://www.cecill.info/licences/Licence_CeCILL_V2-en.txt
+// Organization: FOSSEE, IIT Bombay
+// Email: toolbox@scilab.in
+
+function AVRDigitalSetup(port,pin,direction)
+// Function to decide direction of a digital pin on AVR
+//
+// Calling Sequence
+//     AVRDigitalSetup(port,pin,direction)
+// 
+// Parameters
+//     port : port of microcontroller to be used
+//     pin : pin of port (mentioned above) to be used
+//     direction : direction to be set for pin (INPUT\OUTPUT)
+//
+// Description
+//     Each AVR microcontroller has pins which can be configured as digital
+//     outputs/inputs. These are normally divided among some 'ports' (group of pins).
+//     User has to select one of these port and which pin of that port to be 
+//     used as digital output/input. Also, desired direction must be specified as 
+//     'INPUT' or 'OUTPUT'.     
+//
+// Examples
+//     AVRDigitalSetup('A',0,OUTPUT)
+//
+// See also
+//     AVRDigitalIn AVRDigitalOut
+//
+//
+// Authors
+//     Siddhesh Wani Ashish Kamble
+//
+// This is curretly dummy function. It provides no functionality but is required 
+// for providing support for generating C code for AVR.
+
+if((port==0)|(port>=5)) then 
+disp("Error : Invalid input argument ''port'' in AVRDigitalSetup function.");
+end
+if(pin>=8) then 
+disp("Error : Invalid input argument ''pin'' in AVRDigitalSetup function.");
+end
+if(direction>=2) then 
+disp("Error : Invalid input argument ''direction'' in AVRDigitalSetup function.");
+end
+endfunction
-- 
cgit