From b1f5c3f8d6671b4331cef1dcebdf63b7a43a3a2b Mon Sep 17 00:00:00 2001
From: priyanka
Date: Wed, 24 Jun 2015 15:03:17 +0530
Subject: initial commit / add all books

---
 905/CH7/EX7.7/7_7.sce | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100755 905/CH7/EX7.7/7_7.sce

(limited to '905/CH7/EX7.7/7_7.sce')

diff --git a/905/CH7/EX7.7/7_7.sce b/905/CH7/EX7.7/7_7.sce
new file mode 100755
index 000000000..d270799f0
--- /dev/null
+++ b/905/CH7/EX7.7/7_7.sce
@@ -0,0 +1,49 @@
+clear;
+clc;
+
+// Illustration 7.7
+// Page: 454
+
+printf('Illustration 7.7 -  Page: 454\n\n');
+
+// solution
+//*****Data*****//
+Ff = 1.89; // [cubic m/min]
+Fs = 2.84; // [cubic m/min]
+t = 2; // [min]
+//*****//
+
+printf('Illustration 7.7(a) -  Page: 454\n\n');
+// Solution(a)
+
+Q = Ff+Fs; // [total flow rate, cubic m/min]
+Vt = Q*t; // [cubic m]
+// For a cylindrical vessel H = Dt
+Dt = (4*Vt/%pi)^(1/3); // [m]
+H = Dt; // [m]
+printf("The diameter and height of each mixing vessel is %f m and %f m respectively.\n\n",Dt,H);
+
+printf('Illustration 7.7(b) -  Page: 454\n\n');
+// Solution(b)
+// Based on a recommendation of Flynn and Treybal (1955),
+P = 0.788*Vt; // [mixer power, kW]
+printf("The agitator power for each mixer is %f kW.\n\n",P);
+
+printf('Illustration 7.7(c) -  Page: 454\n\n');
+// Solution(c)
+
+// Based on the recommendation by Ryan et al. (1959), the disengaging area  // in the settler is
+// Dt1*L1 = Q/a = Y
+a = 0.2; // [cubic m/min-square m]
+Y = Q/a; // [square m]
+// For L/Dt = 4
+Dt1 = (Y/4)^0.5; // [m]
+L1 = 4*Dt1; // [m]
+printf("The diameter and length of a settling vessel is %f m and %f m respectively.\n\n",Dt1,L1);
+
+printf('Illustration 7.7(d) -  Page: 454\n\n');
+// Solution(d)
+// Total volume of settler
+Vt1 = %pi*Dt1^2*L1/4; // [cubic m]
+tres1 = Vt1/Q; // [min]
+printf("The residence time in the settling vessel is %f min.\n\n",tres1); 
\ No newline at end of file
-- 
cgit