From b1f5c3f8d6671b4331cef1dcebdf63b7a43a3a2b Mon Sep 17 00:00:00 2001
From: priyanka
Date: Wed, 24 Jun 2015 15:03:17 +0530
Subject: initial commit / add all books

---
 764/CH7/EX7.1.b/result7_1.txt   | 28 ++++++++++++++++++++++++++++
 764/CH7/EX7.1.b/solution7_1.sce | 29 +++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+)
 create mode 100755 764/CH7/EX7.1.b/result7_1.txt
 create mode 100755 764/CH7/EX7.1.b/solution7_1.sce

(limited to '764/CH7/EX7.1.b')

diff --git a/764/CH7/EX7.1.b/result7_1.txt b/764/CH7/EX7.1.b/result7_1.txt
new file mode 100755
index 000000000..196e3188c
--- /dev/null
+++ b/764/CH7/EX7.1.b/result7_1.txt
@@ -0,0 +1,28 @@
+-->//(Threaded Joints) Example 7.1
+ 
+-->//Refer Fig.7.13 on page 232
+ 
+-->//Weight of electric motor P (kN)
+ 
+-->P = 10
+ P  =
+ 
+    10.  
+ 
+-->//Yield tensile strength of 30C8 Syt (N/mm2)
+ 
+-->Syt = 400
+ Syt  =
+ 
+    400.  
+ 
+-->//Factor of safety fs
+ 
+-->fs = 6
+ fs  =
+ 
+    6.  
+ 
+
+Standard size of the bolt is M20
+ 
\ No newline at end of file
diff --git a/764/CH7/EX7.1.b/solution7_1.sce b/764/CH7/EX7.1.b/solution7_1.sce
new file mode 100755
index 000000000..aedd4a6b7
--- /dev/null
+++ b/764/CH7/EX7.1.b/solution7_1.sce
@@ -0,0 +1,29 @@
+
+//Function to standardise the given bolt-size
+function[v] = standard(w)
+    v = ceil(w)
+    rem = pmodulo(v,10)
+    if (rem ~= 0) then
+    v = v + (10 - rem)
+    end
+endfunction
+
+//Obtain path of solution file
+path = get_absolute_file_path('solution7_1.sce')
+//Obtain path of data file
+datapath = path + filesep() + 'data7_1.sci'
+//Clear all
+clc
+//Execute the data file
+exec(datapath)
+//Calculate permissible tensile stress sigmat (N/mm2)
+sigmat = Syt/fs
+//Calculate the core diameter of the eye-bolt dc (mm)
+dc = ((4 * P * 1000)/(%pi * sigmat))^(1/2)
+//use equation 7.4
+//Calculate the nominal diameter d (mm)
+d = dc/0.8
+//Standardise the bolt size from Table 7.1
+d = standard(d)
+//Print results
+printf('\nStandard size of the bolt is M%d\n',d)
-- 
cgit