From 7f60ea012dd2524dae921a2a35adbf7ef21f2bb6 Mon Sep 17 00:00:00 2001
From: prashantsinalkar
Date: Tue, 10 Oct 2017 12:27:19 +0530
Subject: initial commit / add all books

---
 698/CH17/EX17.3/3_gear_train.txt  | 21 ++++++++++++++++
 698/CH17/EX17.3/P3_gear_train.sce | 53 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 74 insertions(+)
 create mode 100644 698/CH17/EX17.3/3_gear_train.txt
 create mode 100644 698/CH17/EX17.3/P3_gear_train.sce

(limited to '698/CH17/EX17.3')

diff --git a/698/CH17/EX17.3/3_gear_train.txt b/698/CH17/EX17.3/3_gear_train.txt
new file mode 100644
index 000000000..c8609f4e6
--- /dev/null
+++ b/698/CH17/EX17.3/3_gear_train.txt
@@ -0,0 +1,21 @@
+(a)Gear diameters:
+	Da=210 mm
+	Db=390 mm
+	Dc=270 mm
+
+(b)Torque on shafts:
+	Mta=47.75 Nm
+	Mtb=0 Nm
+	Mtc=61.4 Nm
+
+(c)Tangential force on gear A: Ft=454 N
+   Separating force Fr=165 N
+
+(d)The same tangential and separating force occurs between gears
+A and B and between gears B and C.
+
+(e) The tooth load for which each gear must be designed is 454 N
+
+(f)The force applied to idler shaft of gear B is the vector sum
+of the forces applied to gear B by A and C
+Fb=sqrt(2*(Ft^2 + Fr^2))=684 N
\ No newline at end of file
diff --git a/698/CH17/EX17.3/P3_gear_train.sce b/698/CH17/EX17.3/P3_gear_train.sce
new file mode 100644
index 000000000..a8b82d38e
--- /dev/null
+++ b/698/CH17/EX17.3/P3_gear_train.sce
@@ -0,0 +1,53 @@
+clc
+//Example 17.3
+//Gear train
+
+//------------------------------------------------------------------------------
+
+//Given data
+//Number of teeth
+Na=35
+Nb=65
+Nc=45
+//Speeds
+n=600 //rpm
+w=(2*%pi*n)/60
+//Power
+P=3000 //W
+//pressure angle
+phi=20
+//module
+m=6 //m
+
+res3=mopen(TMPDIR+'3_gear_train.txt','wt')
+
+//Gear diameters
+Da=Na*m
+Db=Nb*m
+Dc=Nc*m
+mfprintf(res3,'(a)Gear diameters:\n\tDa=%d mm\n\tDb=%d mm\n\tDc=%d mm\n\n',Da,Db,Dc)
+
+//Torque
+Mta=P/w
+Mtb=0
+Mtc=Mta* (Nc/Na)
+mfprintf(res3,'(b)Torque on shafts:\n\tMta=%0.2f Nm\n\tMtb=%d Nm\n\tMtc=%0.1f Nm\n\n',Mta,Mtb,Mtc)
+
+//Forces on gear A
+Ft=Mta/((Da/2)*10^-3)
+Fr=Ft*tand(phi)
+mfprintf(res3,'(c)Tangential force on gear A: Ft=%d N\n   Separating force Fr=%d N\n\n',Ft,Fr)
+mfprintf(res3,'(d)The same tangential and separating force occurs between gears\nA and B and between gears B and C.\n\n')
+
+max_force=max(Ft,Fr)
+mfprintf(res3,'(e) The tooth load for which each gear must be designed is %d N\n\n',max_force)
+
+//Force applied to idler shaft
+Fb=sqrt(2*(Ft^2 + Fr^2))
+mfprintf(res3,'(f)The force applied to idler shaft of gear B is the vector sum\nof the forces applied to gear B by A and C\n')
+mfprintf(res3,'Fb=sqrt(2*(Ft^2 + Fr^2))=%d N',Fb)
+
+mclose(res3)
+editor(TMPDIR+'3_gear_train.txt')
+//------------------------------------------------------------------------------
+//-----------------------------End of program-----------------------------------
-- 
cgit