From d1e070fe2d77c8e7f6ba4b0c57b1b42e26349059 Mon Sep 17 00:00:00 2001
From: prashantsinalkar
Date: Sat, 3 Feb 2018 10:59:42 +0530
Subject: Modified the code

---
 3776/CH3/EX3.5/Ex3_5.sce | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to '3776/CH3/EX3.5/Ex3_5.sce')

diff --git a/3776/CH3/EX3.5/Ex3_5.sce b/3776/CH3/EX3.5/Ex3_5.sce
index 4fe17f46f..78714b79b 100644
--- a/3776/CH3/EX3.5/Ex3_5.sce
+++ b/3776/CH3/EX3.5/Ex3_5.sce
@@ -1,15 +1,15 @@
 clear
 //Given
-p_in = 0.7   //MPa - internal pressure 
-n_bolts = 20 // number of bolts 
-dia = 650    //mm - bolt circle diameter 
-stress_allow = 125 //mm Maximum alowable stress
+p_in = 0.7   //MPa - internal pressure
+n_bolts = 20 // number of bolts
+dia = 650    //mm - bolt circle diameter
+stress_allow = 125 //MPa Maximum alowable stress
 Stress_conc = 2    //stress concentration
-d = 25             //mm 
-//caliculations
+d = 25             //mm
+//calculations
 
 F = p_in*3.14*(((dia-2*d)/2)**2)*(10**6) //N
 F_each = F/n_bolts //N- force per each Bolt
-A = Stress_conc*F_each/(stress_allow*(10**6)) //mm2 The bolt area 
+A = Stress_conc*F_each/(stress_allow*(10**6)) //sq.mm The bolt area
 Bolt_dia = 2*((A/3.14)**0.5) //mm the bolt daimeter
 printf("\n The diameter of each bolt is %0.1f mm",Bolt_dia)
-- 
cgit