From 7f60ea012dd2524dae921a2a35adbf7ef21f2bb6 Mon Sep 17 00:00:00 2001 From: prashantsinalkar Date: Tue, 10 Oct 2017 12:27:19 +0530 Subject: initial commit / add all books --- 3754/CH36/EX36.1/36_1.sce | 15 +++++++++++++++ 3754/CH36/EX36.2/36_2.sce | 17 +++++++++++++++++ 3754/CH36/EX36.3/36_3.sce | 16 ++++++++++++++++ 3754/CH36/EX36.4/36_4.sce | 14 ++++++++++++++ 4 files changed, 62 insertions(+) create mode 100644 3754/CH36/EX36.1/36_1.sce create mode 100644 3754/CH36/EX36.2/36_2.sce create mode 100644 3754/CH36/EX36.3/36_3.sce create mode 100644 3754/CH36/EX36.4/36_4.sce (limited to '3754/CH36') diff --git a/3754/CH36/EX36.1/36_1.sce b/3754/CH36/EX36.1/36_1.sce new file mode 100644 index 000000000..beacbb131 --- /dev/null +++ b/3754/CH36/EX36.1/36_1.sce @@ -0,0 +1,15 @@ +clear// + +//Variables + +R1 = 1.0 * 10**3 //Resistance (in ohm) +R2 = 100.0 * 10**3 //Resistance (in ohm) +f1 = 159.0 //Frequency (in Hertz) + +//Calculation + +C = 1.0/(2*%pi*R2*f1) //Capacitance (in Farad) + +//Result + +printf("\n Capacitance required in the circuit is %0.2f micro-Farad.",C * 10**6) diff --git a/3754/CH36/EX36.2/36_2.sce b/3754/CH36/EX36.2/36_2.sce new file mode 100644 index 000000000..b6f3d6c7b --- /dev/null +++ b/3754/CH36/EX36.2/36_2.sce @@ -0,0 +1,17 @@ +clear// + +//Variables + +R1 = 1.0 * 10**3 //Resistance (in ohm) +Rf = 51.0 * 10**3 //Resistance (in ohm) +Cf = 0.01 * 10**-6 //Capacitance (in Farad) + +//Calculation + +f = 1.0/(2*%pi*Rf*Cf) //Frequency (in Hertz) +fmin = 10* f //Minimum frequency required (in Hertz) + +//Result + +printf("\n The cut-off frequency of an integrator circuit is %0.0f Hz.",f) +printf("\n Minimum non-linear operating frequency is %0.0f Hz.",fmin) diff --git a/3754/CH36/EX36.3/36_3.sce b/3754/CH36/EX36.3/36_3.sce new file mode 100644 index 000000000..360ae8e12 --- /dev/null +++ b/3754/CH36/EX36.3/36_3.sce @@ -0,0 +1,16 @@ +clear// + +//Variables + +R1 = 10.0 * 10**3 //Resistance (in ohm) +C1 = 0.01 * 10**-6 //Capacitor (in Farad) + +//Calculation + +f2 = 1.0/(2*%pi*R1*C1) //Frequency (in Hertz) +fmax = f2 / 10.0 //Maximum linear operating freqeuncy (in Hertz) + +//Result + +printf("\n Cut-off frequency is %0.1f Hz.",f2) +printf("\n Maximum linear operating frequency is %0.0f Hz.",fmax) diff --git a/3754/CH36/EX36.4/36_4.sce b/3754/CH36/EX36.4/36_4.sce new file mode 100644 index 000000000..334888238 --- /dev/null +++ b/3754/CH36/EX36.4/36_4.sce @@ -0,0 +1,14 @@ +clear// + +//Variables + +R1=51.0*10**3;R2=51.0*10**3; +C1=0.001*10**-6;C2=0.001*10**-6;C=0.001*10**-6; + +//Calculation + +fo = 1.0/(2*%pi*R1*C1) //Resonant frequency (in Hertz) + +//Result + +printf("\n The frequency of oscillations is %0.1f Hz.",fo) -- cgit