From b1f5c3f8d6671b4331cef1dcebdf63b7a43a3a2b Mon Sep 17 00:00:00 2001
From: priyanka
Date: Wed, 24 Jun 2015 15:03:17 +0530
Subject: initial commit / add all books

---
 281/CH7/EX7.2/example7_2.sce | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100755 281/CH7/EX7.2/example7_2.sce

(limited to '281/CH7/EX7.2')

diff --git a/281/CH7/EX7.2/example7_2.sce b/281/CH7/EX7.2/example7_2.sce
new file mode 100755
index 000000000..b8b88deed
--- /dev/null
+++ b/281/CH7/EX7.2/example7_2.sce
@@ -0,0 +1,40 @@
+disp('chapter 7 ex7.2')
+disp('given')
+disp('Design a precision full-wave rectifier circuit')
+disp('peak output Vo=2volt')
+Vo=2
+disp('input peak value Vi=.5volt')
+Vi=0.5
+disp('frequency f=1MHz')
+f=1*10^(6)
+disp('supply voltage Vcc=+or-15volt')  //(using bipolar op-amp)
+Vcc=15
+disp('I1>IBmax')
+disp('let I1=500*10^(-6)A')  //for adequate diode current
+I1=500*10^(-6)
+disp('R1=Vi/I1')
+R1=Vi/I1
+disp('ohms',R1)   //standard value
+disp('R2=2*R1')
+R2=2*R1 
+disp('ohms',R2)   //use two 1kohm resistors in series
+disp('R3=R1||R2')
+R3=R1*R2/(R1+R2)
+disp('ohms',R3)   //use 680ohm standard value
+disp('R4=R5=R1=1kohm')
+R4=1000
+R5=1000
+disp('for the output tobe 2volt when the input is 0.5volt')
+disp('R6=Vo/Vi*R5')
+R6=Vo/Vi*R5
+disp('ohms',R6)
+disp('use standard value R6=3.9kohm')
+R6=3900
+disp('R7=R4||R5||R6')
+R7=R4*R5*R6/(R4*R5+R5*R6+R6*R4)
+disp('ohms',R7) //use 470ohm standard value
+disp('For diode D1 and D2,Vr>30volt and trrmax=0.1microsec as in ex7.1')
+disp('Compensate A1 as a voltage follower')
+disp('A2 for gain of R6+R4||R5/(R4||R5)')
+A2=(R6+(R4*R5/(R4+R5)))/(R4*R5/(R4+R5))
+disp(A2)
\ No newline at end of file
-- 
cgit