From b1f5c3f8d6671b4331cef1dcebdf63b7a43a3a2b Mon Sep 17 00:00:00 2001
From: priyanka
Date: Wed, 24 Jun 2015 15:03:17 +0530
Subject: initial commit / add all books

---
 1979/CH3/EX3.6/Ex3_6.sce | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100755 1979/CH3/EX3.6/Ex3_6.sce

(limited to '1979/CH3/EX3.6/Ex3_6.sce')

diff --git a/1979/CH3/EX3.6/Ex3_6.sce b/1979/CH3/EX3.6/Ex3_6.sce
new file mode 100755
index 000000000..eaaaad3b6
--- /dev/null
+++ b/1979/CH3/EX3.6/Ex3_6.sce
@@ -0,0 +1,25 @@
+//chapter-3 page 50 example 3.6
+//==============================================================================
+clc;
+clear;
+
+Zl=100;//Pure Load resistance of a dipole antenna in ohms
+Z0=600;//Characteristic Impedance of a wire feeder in ohms
+f=100*10^6;//Frequency in Hz
+c=3*10^8;//Velocity of Light in m/sec
+
+//CALCULATIONS
+w=c/f;//Wave Length in met
+l=((w/(2*(%pi)))*atan(sqrt(Zl/Z0)));//The position of the Stub in met
+x=atand(sqrt((Zl*Z0))/(Zl-Z0));
+y=180+x;//In Degrees
+l1=((w/(2*(%pi)))*y);//Length of Short Circuited Stub in met
+l0=l1*((%pi)/180);
+
+//OUTPUTS
+mprintf('\nThe Point of Attachment is l=%1.3f met \nLength of SC Stub is l1=%1.2f met',l,l0);
+
+//=========================END OF PROGRAM==============================================================
+
+
+
-- 
cgit