From b1f5c3f8d6671b4331cef1dcebdf63b7a43a3a2b Mon Sep 17 00:00:00 2001
From: priyanka
Date: Wed, 24 Jun 2015 15:03:17 +0530
Subject: initial commit / add all books

---
 1835/CH3/EX3.14/Ex3_14.sce | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100755 1835/CH3/EX3.14/Ex3_14.sce

(limited to '1835/CH3/EX3.14')

diff --git a/1835/CH3/EX3.14/Ex3_14.sce b/1835/CH3/EX3.14/Ex3_14.sce
new file mode 100755
index 000000000..48046e555
--- /dev/null
+++ b/1835/CH3/EX3.14/Ex3_14.sce
@@ -0,0 +1,21 @@
+//CHAPTER 3 ILLUSRTATION 14 PAGE NO 111
+//TITLE:FRICTION
+clc
+clear
+//===========================================================================================
+//INPUT DATA
+PI=3.147
+P=10000//                               POWER TRRANSMITTED BY CLUTCH IN WATTS
+N=3000//                                SPEED IN rpm
+p=.09//                                 AXIAL PRESSURE IN N/mm^2
+//d1=1.4d2                              RELATION BETWEEN DIAMETERS 
+K=1.4//                                 D1/D2
+n=2
+U=.3//                                  COEFFICIENT OF FRICTION
+//==========================================================================================
+T=P*60000/1000/(2*PI*N)//                     ASSUMING UNIFORM WEAR            TORQUE IN N-m
+r2=(T*2/(n*U*2*PI*p*10^6*(K-1)*(K+1)))^(1/3)//            INTERNAL RADIUS
+
+//===========================================================================================
+printf('THE INTERNAL RADIUS =%f cm\n THE EXTERNAL RADIUS =%f cm',r2*100,K*r2*100)
+ 
-- 
cgit