From b1f5c3f8d6671b4331cef1dcebdf63b7a43a3a2b Mon Sep 17 00:00:00 2001
From: priyanka
Date: Wed, 24 Jun 2015 15:03:17 +0530
Subject: initial commit / add all books

---
 1835/CH2/EX2.8/Ex2_8.sce | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100755 1835/CH2/EX2.8/Ex2_8.sce

(limited to '1835/CH2/EX2.8')

diff --git a/1835/CH2/EX2.8/Ex2_8.sce b/1835/CH2/EX2.8/Ex2_8.sce
new file mode 100755
index 000000000..7fd767360
--- /dev/null
+++ b/1835/CH2/EX2.8/Ex2_8.sce
@@ -0,0 +1,31 @@
+//CHAPTER 2,ILLUSTRATION 8 PAGE 62
+//TITLE:TRANSMISSION OF MOTION AND POWER BY BELTS AND PULLEYS
+clc
+clear
+//INPUT
+t=9//THICKNESS IN mm
+b=250//WIDTH IN mm
+D=90//DIAMETER OF PULLEY IN cm
+N=336//SPEED IN rpm
+PI=3.141
+U=.35//COEFFICIENT FRICTION
+e=2.71
+THETA=120*PI/180
+Fb=2//STRESS IN MPa
+d=1000//DENSITY IN KG/M^3
+
+//CALCULATION
+M=b*10^-3*t*10^-3*d//MASS IN KG
+V=PI*D*10^-2*N/60//VELOCITY IN m/s
+Tc=M*V^2//CENTRIFUGAL TENSION
+Tmax=b*t*Fb//MAX TENSION IN N
+T1=Tmax-Tc
+T2=T1/(e^(U*THETA))
+P=(T1-T2)*V/1000
+
+//OUTPUT
+printf('THE TENSION ON TIGHT SIDE OF THE BELT IS %f N\n',T1)
+printf('THE TENSION ON SLACK SIDE OF THE BELT IS %f N\n',T2)
+printf('CENTRIFUGAL TENSION =%f N\n',Tc)
+printf('THE POWER CAPACITY OF BELT IS %f KW\n',P)
+
-- 
cgit