diff options
Diffstat (limited to '3751/CH12/EX12.5')
| -rw-r--r-- | 3751/CH12/EX12.5/Ex12_5.sce | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/3751/CH12/EX12.5/Ex12_5.sce b/3751/CH12/EX12.5/Ex12_5.sce new file mode 100644 index 000000000..93c09f621 --- /dev/null +++ b/3751/CH12/EX12.5/Ex12_5.sce @@ -0,0 +1,62 @@ +//Fluid Systems - By Shiv Kumar +//Chapter 12- Reciprocating Pumps +//Example 12.5 +//To Determine the Pressure Head on Piston at Begining, Middle and End of Suction Stroke. + + clc + clear + +//Given Data:- + L=150; //Length of Stroke, mm + l_s=7; //Length of Suction Pipe, m + ds_by_D=3/4; //Ratio of Suction Pipe Diameter to Piston Diameter, ds/D + hs=2.5; //Suction Head, m + ds=75; //Diameter of Suction Pipe, mm + N=75; //Crank Speed, rpm + f=0.01; //Co-efficient of Friction + + +//Data Used:- + g=9.81; //Acceleration due to gravity, m/s^2 + h_atm=10.33; //Atmospheric Pressure Head, m of water + + +//Computations:- + L=L/1000; //m + ds=ds/1000; //m + + r=L/2; //Crank radius, m + A_by_as=(1/ds_by_D)^2; + omega=2*%pi*N/60; //Angular Velocity, rad/s + +//At Begining of Suction Stroke, + theta=0; //degrees + h_as=(l_s/g)*A_by_as*omega^2*r*cosd(theta); //Acceleration Head, m of water + h_fs=(4*f*l_s/(2*g*ds))*(A_by_as*omega*r*sind(theta))^2; //Head loss due to friction, m of water + h_v=hs+h_fs+h_as; //Pressure Head on Piston, m of water Vaccum + h_abs=h_atm-h_v; //Pressure Head on Piston, m of water Absolute + //Result 1 + printf("At Begining of Suction Stroke\n Pressure Head on Piston=%.2f m of water Vaccum \n\t\t\t =%.2f m of water Absolute\n\n",h_v,h_abs) //The answer vary due to round off error + + +//At Mid of Suction Stroke, + theta=90; //degrees + h_as=(l_s/g)*A_by_as*omega^2*r*cosd(theta); //Acceleration Head, m of water + h_fs=(4*f*l_s/(2*g*ds))*(A_by_as*omega*r*sind(theta))^2; //Head loss due to friction, m of water + h_v=hs+h_fs+h_as; //Pressure Head on Piston, m of water Vaccum + h_abs=h_atm-h_v; //Pressure Head on Piston, m of water Absolute + //Result 2 + printf("At Middle of Suction Stroke\n Pressure Head on Piston=%.4f m of water Vaccum \n\t\t\t =%.3f m of water Absolute\n\n",h_v,h_abs) //The answer vary due to round off error + + +//At End of Suction Stroke, + theta=180; //degrees + h_as=(l_s/g)*A_by_as*omega^2*r*cosd(theta); //Acceleration Head, m of water + h_fs=(4*f*l_s/(2*g*ds))*(A_by_as*omega*r*sind(theta))^2; //Head loss due to friction, m of water + h_v=hs+h_fs+h_as; //Pressure Head on Piston, m of water Vaccum + h_abs=h_atm-h_v; //Pressure Head on Piston, m of water Absolute + //Result 3 + printf("At End of Suction Stroke\n Pressure Head on Piston=%.2f m of water Vaccum \n\t\t\t =%.2f m of water Absolute\n\n",h_v,h_abs) //The answer vary due to round off error + + + |