{ "metadata": { "name": "" }, "nbformat": 3, "nbformat_minor": 0, "worksheets": [ { "cells": [ { "cell_type": "heading", "level": 1, "metadata": {}, "source": [ "CHAPTER 8: AC DYNAMO TORQUE RELATIONS-SYNCHRONOUS MOTORS" ] }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.1, Page number 225" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "P = 20.0 #Number of poles\n", "hp = 40.0 #Power rating of the synchronous motor(hp)\n", "V_L = 660.0 #Line voltage(V)\n", "beta = 0.5 #At no-load, the rotor is retarded 0.5 mechanical degree from its synchronous position\n", "X_s = 10.0 #Synchronous reactance(ohm)\n", "R_a = 1.0 #Effective armature resistance(ohm)\n", "\n", "#Calculation\n", "#Case(a)\n", "alpha = P*(beta/2) #Rotor shift from the synchronous position in electrical degrees\n", "#Case(b)\n", "V_p = V_L/3**0.5 #Phase voltage(V)\n", "E_gp = V_p #Generated voltage/phase at no-load(V)\n", "E_r = complex((V_p-E_gp*math.cos(alpha*math.pi/180)),(E_gp*math.sin(alpha*math.pi/180))) #Resultant emf across the armature per phase(V/phase)\n", "#Case(c)\n", "Z_s = complex(R_a,X_s) #Synchronous impedance(ohm/phase)\n", "I_a = E_r/Z_s #Armature current/phase(A/phase)\n", "#Case(d)\n", "Ia = abs(I_a) #Magnitude of armature current/phase(A/phase)\n", "theta = cmath.phase(I_a)*180/math.pi #Phase angle of armature current(degree)\n", "P_p = V_p*Ia*math.cos(theta*math.pi/180) #Power per phase drawn by the motor from the bus(W/phase)\n", "P_t = 3*P_p #Total power drawn by the motor from the bus(W)\n", "#Case(e)\n", "P_a = 3*Ia**2*R_a #Armature power loss at no-load(W)\n", "P_d = (P_t-P_a)/746.0 #Internal developed horsepower at no-load\n", "\n", "#Result\n", "print('Case(a): Rotor shift from the synchronous position in electrical degrees , \u03b1 = %.f\u00b0 ' %alpha)\n", "print('Case(b): Resultant EMF across the armature per phase , E_r = %.1f\u2220%.1f\u00b0 V/phase' %(abs(E_r),cmath.phase(E_r)*180/math.pi))\n", "print('Case(c): Armature current per phase , I_a = %.2f\u2220%.1f\u00b0 A/phase' %(Ia,theta))\n", "print('Case(d): Power per phase drawn by the motor from the bus , P_p = %.f W/phase' %P_p)\n", "print(' Total power drawn by the motor from the bus , P_t = %.f W' %P_t)\n", "print('Case(e): Armature power loss = %.f W' %P_a)\n", "print(' Internal developed horsepower at no-load , P_d = %.f hp' %P_d)" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Rotor shift from the synchronous position in electrical degrees , \u03b1 = 5\u00b0 \n", "Case(b): Resultant EMF across the armature per phase , E_r = 33.2\u222087.5\u00b0 V/phase\n", "Case(c): Armature current per phase , I_a = 3.31\u22203.2\u00b0 A/phase\n", "Case(d): Power per phase drawn by the motor from the bus , P_p = 1258 W/phase\n", " Total power drawn by the motor from the bus , P_t = 3775 W\n", "Case(e): Armature power loss = 33 W\n", " Internal developed horsepower at no-load , P_d = 5 hp\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.2, Page number 226" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "P = 20.0 #Number of poles\n", "hp = 40.0 #Power rating of the synchronous motor(hp)\n", "V_L = 660.0 #Line voltage(V)\n", "beta = 5.0 #At no-load, the rotor is retarded 0.5 mechanical degree from its synchronous position\n", "X_s = 10.0 #Synchronous reactance(ohm)\n", "R_a = 1.0 #Effective armature resistance(ohm)\n", "\n", "#Calculation\n", "#Case(a)\n", "alpha = P*(beta/2) #Rotor shift from the synchronous position in electrical degrees\n", "#Case(b)\n", "V_p = V_L/3**0.5 #Phase voltage(V)\n", "E_gp = V_p #Generated voltage/phase at no-load(V)\n", "E_r = complex((V_p-E_gp*math.cos(alpha*math.pi/180)),(E_gp*math.sin(alpha*math.pi/180))) #Resultant emf across the armature per phase(V/phase)\n", "#Case(c)\n", "Z_s = complex(R_a,X_s) #Synchronous impedance(ohm/phase)\n", "I_a = E_r/Z_s #Armature current/phase(A/phase)\n", "#Case(d)\n", "Ia = abs(I_a) #Magnitude of armature current/phase(A/phase)\n", "theta = cmath.phase(I_a)*180/math.pi #Phase angle of armature current(degree)\n", "P_p = V_p*Ia*math.cos(theta*math.pi/180) #Power per phase drawn by the motor from the bus(W/phase)\n", "P_t = 3*P_p #Total power drawn by the motor from the bus(W)\n", "#Case(e)\n", "P_a = 3*Ia**2*R_a #Armature power loss at no-load(W)\n", "P_d = (P_t-P_a)/746.0 #Internal developed horsepower at no-load\n", "\n", "#Result\n", "print('Case(a): Rotor shift from the synchronous position in electrical degrees , \u03b1 = %.f\u00b0 ' %alpha)\n", "print('Case(b): Resultant EMF across the armature per phase , E_r = %.f\u2220%.f\u00b0 V/phase' %(abs(E_r),cmath.phase(E_r)*180/math.pi))\n", "print('Case(c): Armature current per phase , I_a = %.1f\u2220%.1f\u00b0 A/phase' %(Ia,theta))\n", "print('Case(d): Power per phase drawn by the motor from the bus , P_p = %.f W/phase' %P_p)\n", "print(' Total power drawn by the motor from the bus , P_t = %.f W' %P_t)\n", "print('Case(e): Armature power loss = %.f W' %P_a)\n", "print(' Internal developed horsepower at no-load , P_d = %.1f hp' %P_d)\n", "print('\\nNOTE: Changes in obtained answer from that of textbook is due to more precision i.e more number of decimal places')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Rotor shift from the synchronous position in electrical degrees , \u03b1 = 50\u00b0 \n", "Case(b): Resultant EMF across the armature per phase , E_r = 322\u222065\u00b0 V/phase\n", "Case(c): Armature current per phase , I_a = 32.0\u2220-19.3\u00b0 A/phase\n", "Case(d): Power per phase drawn by the motor from the bus , P_p = 11526 W/phase\n", " Total power drawn by the motor from the bus , P_t = 34579 W\n", "Case(e): Armature power loss = 3081 W\n", " Internal developed horsepower at no-load , P_d = 42.2 hp\n", "\n", "NOTE: Changes in obtained answer from that of textbook is due to more precision i.e more number of decimal places\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.3, Page number 237" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "P = 6.0 #Number of poles\n", "hp = 50.0 #Power rating of the synchronous motor(hp)\n", "V_L = 440.0 #Line voltage(V)\n", "alpha = 20.0 #At no-load, the rotor is retarded 0.5 mechanical degree from its synchronous position\n", "X_s = 2.4 #Synchronous reactance(ohm)\n", "R_a = 0.1 #Effective armature resistance(ohm)\n", "E_gp_a = 240.0 #Generated phase voltage(V)\n", "E_gp_b = 265.0 #Generated phase voltage(V)\n", "E_gp_c = 290.0 #Generated phase voltage(V)\n", "\n", "#Calculation\n", "#Case(a)\n", "V_p = V_L /3**0.5 #Phase voltage(V)\n", "E_ra = complex((V_p-E_gp_a*math.cos(alpha*math.pi/180)),(E_gp_a*math.sin(alpha*math.pi/180))) #Resultant emf\n", "Z_s = complex(R_a,X_s) #Synchronous impedance(ohm)\n", "I_ap1 = E_ra/Z_s #Armature current(A)\n", "theta_1 = cmath.phase(I_ap1)*180/math.pi #Angle(degree)\n", "pf_1 = math.cos(theta_1*math.pi/180) #Power factor\n", "I_a1 = abs(I_ap1) #Magnitude of armature current(A)\n", "P_d1 = 3*E_gp_a*I_a1*math.cos((160-theta_1)*math.pi/180) #Power drawn from the bus(W)\n", "Horse_power1 = abs(P_d1)/746.0 #Horsepower developed by the armature(hp) \n", "#Case(b)\n", "E_rb = complex((V_p-E_gp_b*math.cos(alpha*math.pi/180)),(E_gp_b*math.sin(alpha*math.pi/180))) #Resultant emf\n", "Z_s = complex(R_a,X_s) #Synchronous impedance(ohm)\n", "I_ap2 = E_rb/Z_s #Armature current(A)\n", "theta_2 = cmath.phase(I_ap2)*180/math.pi #Angle(degree)\n", "pf_2 = math.cos(theta_2*math.pi/180) #Power factor\n", "I_a2 = abs(I_ap2) #Magnitude of armature current(A)\n", "P_d2 = 3*E_gp_b*I_a2*math.cos((160-theta_2)*math.pi/180) #Power drawn from the bus(W)\n", "Horse_power2 = abs(P_d2)/746.0 #Horsepower developed by the armature(hp) \n", "#Case(c)\n", "E_rc = complex((V_p-E_gp_c*math.cos(alpha*math.pi/180)),(E_gp_c*math.sin(alpha*math.pi/180))) #Resultant emf\n", "Z_s = complex(R_a,X_s) #Synchronous impedance(ohm)\n", "I_ap3 = E_rc/Z_s #Armature current(A)\n", "theta_3 = cmath.phase(I_ap3)*180/math.pi #Angle(degree)\n", "pf_3 = math.cos(theta_3*math.pi/180) #Power factor\n", "I_a3 = abs(I_ap3) #Magnitude of armature current(A)\n", "P_d3 = 3*E_gp_c*I_a3*math.cos((160-theta_3)*math.pi/180) #Power drawn from the bus(W)\n", "Horse_power3 = abs(P_d3)/746.0 #Horsepower developed by the armature(hp)\n", "\n", "#Result\n", "print('Case(a): Armature current , I_ap = %.2f\u2220%.2f\u00b0 A' %(I_a1,theta_1))\n", "print(' Power factor = %.4f lagging' %pf_1)\n", "print(' Horsepower developed by the armature , Horsepower = %.1f hp' %Horse_power1)\n", "print('Case(b): Armature current , I_ap = %.2f\u2220%.2f\u00b0 A' %(I_a2,theta_2))\n", "print(' Power factor = %.f (Unity PF)' %pf_2)\n", "print(' Horsepower developed by the armature , Horsepower = %.1f hp' %Horse_power2)\n", "print('Case(c): Armature current , I_ap = %.f\u2220%.2f\u00b0 A' %(I_a3,theta_3))\n", "print(' Power factor = %.4f leading' %pf_3)\n", "print(' Horsepower developed by the armature , Horsepower = %.1f hp' %Horse_power3)" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Armature current , I_ap = 36.17\u2220-16.77\u00b0 A\n", " Power factor = 0.9575 lagging\n", " Horsepower developed by the armature , Horsepower = 34.9 hp\n", "Case(b): Armature current , I_ap = 37.79\u2220-0.78\u00b0 A\n", " Power factor = 1 (Unity PF)\n", " Horsepower developed by the armature , Horsepower = 38.0 hp\n", "Case(c): Armature current , I_ap = 42\u222012.94\u00b0 A\n", " Power factor = 0.9746 leading\n", " Horsepower developed by the armature , Horsepower = 41.1 hp\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.4, Page number 240" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "P = 2.0 #Number of poles\n", "hp = 1000.0 #Power rating of the synchronous motor(hp)\n", "V_L = 6000.0 #Line voltage(V)\n", "f = 60.0 #Frequency(Hz)\n", "R_a = 0.52 #Effective armature resistance(ohm)\n", "X_s = 4.2 #Synchronous reactance(ohm)\n", "P_t = 811.0 #Input power(kW)\n", "PF = 0.8 #Power factor leading\n", "\n", "#Calculation\n", "V_p = V_L/3**0.5 #Phase voltage(V)\n", "I_L = P_t*1000/(3**0.5*V_L*PF) #Line current(A)\n", "I_ap = I_L #Phase armature current(A)\n", "Z_p = complex(R_a,X_s) #Impedance per phase(ohm)\n", "Zp = abs(Z_p) #Magnitude of impedance per phase(ohm)\n", "beta = cmath.phase(Z_p)*180/math.pi #Phase angle of impedance per phase(degree)\n", "E_r = I_ap*Zp #EMF(V)\n", "theta = math.acos(PF)*180/math.pi#Power factor angle(degree)\n", "delta = beta+theta #Difference angle(degree)\n", "E_gp_f = (E_r**2+V_p**2-2*E_r*V_p*math.cos(delta*math.pi/180))**0.5 #Generated phase voltage(V)\n", "E_gp_g = complex((V_p+E_r*math.cos((180-delta)*math.pi/180)),(E_r*math.sin((180-delta)*math.pi/180))) #Generated phase voltage(V)\n", "E_gp_h = complex((V_p*PF-I_ap*R_a),(V_p*math.sin(theta*math.pi/180)+I_ap*X_s)) #Generated phase voltage(V)\n", "\n", "#Result\n", "print('Case(a): Line current , I_L = %.2f A' %I_L)\n", "print(' Phase armature current , I_ap = %.2f A' %I_ap)\n", "print('Case(b): Impedance per phase , Z_p\u2220\u03b2 = %.3f\u2220%.2f\u00b0 \u03a9' %(Zp,beta))\n", "print('Case(c): Magnitude I_aZ_p = E_r = %.1f V' %E_r)\n", "print('Case(d): Power factor angle , \u03b8 = %.2f\u00b0 leading' %theta)\n", "print('Case(e): Difference angle at 0.8 PF , \u03b4 = %.2f\u00b0 ' %delta)\n", "print('Case(f): Generated phase voltage , E_gp = %.f V' %E_gp_f)\n", "print('Case(g): Generated phase voltage , E_gp = %.f\u2220%.2f\u00b0 V' %(abs(E_gp_g),cmath.phase(E_gp_g)*180/math.pi))\n", "print('Case(h): Generated phase voltage , E_gp = %.f\u2220%.2f\u00b0 V' %(abs(E_gp_h),cmath.phase(E_gp_h)*180/math.pi))" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Line current , I_L = 97.55 A\n", " Phase armature current , I_ap = 97.55 A\n", "Case(b): Impedance per phase , Z_p\u2220\u03b2 = 4.232\u222082.94\u00b0 \u03a9\n", "Case(c): Magnitude I_aZ_p = E_r = 412.8 V\n", "Case(d): Power factor angle , \u03b8 = 36.87\u00b0 leading\n", "Case(e): Difference angle at 0.8 PF , \u03b4 = 119.81\u00b0 \n", "Case(f): Generated phase voltage , E_gp = 3687 V\n", "Case(g): Generated phase voltage , E_gp = 3687\u22205.58\u00b0 V\n", "Case(h): Generated phase voltage , E_gp = 3687\u222042.45\u00b0 V\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.5, Page number 242" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "\n", "#Variable declaration\n", "E_gp = 3687.0 #Generated phase voltage(V)\n", "V_L = 6000.0 #Line voltage(V)\n", "E_r = 412.8 #EMF(V)\n", "V_p = V_L/3**0.5 #Phase voltage(V)\n", "delta = 119.82 #Difference angle(degree)\n", "theta = 36.87 #Power factor angle(degree)\n", "R_a = 0.52 #Effective armature resistance(ohm)\n", "X_s = 4.2 #Synchronous reactance(ohm)\n", "I_a = 97.55 #Armature current(A)\n", "\n", "#Calculation\n", "alpha_1 = math.acos((E_gp**2+V_p**2-E_r**2)/(2*E_gp*V_p))*180/math.pi #Torque angle(degree)\n", "alpha_2 = math.asin(E_r*math.sin(delta*math.pi/180)/E_gp)*180/math.pi #Torque angle(degree)\n", "alpha_3 = theta-math.atan((V_p*math.sin(theta*math.pi/180)+I_a*X_s)/(V_p*math.cos(theta*math.pi/180)-I_a*R_a))*180/math.pi #Torque angle(degree)\n", "\n", "#Result\n", "print('Case(a): Torque angle , \u03b1 = %.2f\u00b0 '%alpha_1)\n", "print('Case(b): Torque angle , \u03b1 = %.2f\u00b0 '%alpha_2)\n", "print('Case(c): Torque angle , \u03b1 = %.2f\u00b0 '%alpha_3)\n", "print('\\nNOTE: ERROR : Negative sign is not mentioned in angle \u03b1 part(c) in textbook answer')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Torque angle , \u03b1 = 5.57\u00b0 \n", "Case(b): Torque angle , \u03b1 = 5.57\u00b0 \n", "Case(c): Torque angle , \u03b1 = -5.58\u00b0 \n", "\n", "NOTE: ERROR : Negative sign is not mentioned in angle \u03b1 part(c) in textbook answer\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.6, Page number 242" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "\n", "#Variable declaration\n", "P = 2.0 #Number of poles\n", "hp = 1000.0 #Power rating of the synchronous motor(hp)\n", "V_L = 6000.0 #Line voltage(V)\n", "f = 60.0 #Frequency(Hz)\n", "P_t = 811.0 #Input power(kW)\n", "PF = 0.8 #Power factor leading\n", "E_gp = 3687.0 #Generated phase voltage(V)\n", "I_a = 97.55 #Armature current(A)\n", "E_gpI_a = 42.45 #Angle between Generated phase voltage and armature current(degree)\n", "\n", "#Calculation\n", "P_p = E_gp*I_a*math.cos(E_gpI_a*math.pi/180)/1000 #Mechanical power developed per phase(kW)\n", "P_t_a = 3*P_p #Total mechanical power developed(kW)\n", "P_t_b = P_t_a/0.746 #Internal power developed at rated load(hp)\n", "S = 120*f/P #Speed of the motor(rpm)\n", "T_int = P_t_b*5252/S #Internal torque developed(lb-ft)\n", "T_ext = hp*5252/3600 #External torque developed(lb-ft)\n", "n = T_ext/T_int*100 #Motor efficiency(%)\n", "\n", "#Result\n", "print('Case(a): Mechanical power developed in the armature per phase , P_p = %.3f kW' %P_p)\n", "print(' Total Mechanical power developed in the armature , P_t = %.1f kW' %P_t_a)\n", "print('Case(b): Internal power developed at rated load , P_t = %.1f hp' %P_t_b)\n", "print('Case(c): Internal torque developed , T_int = %.f lb-ft' %T_int)\n", "print('Case(d): Motor efficiency , \u03b7 = %.1f percent' %n)" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Mechanical power developed in the armature per phase , P_p = 265.386 kW\n", " Total Mechanical power developed in the armature , P_t = 796.2 kW\n", "Case(b): Internal power developed at rated load , P_t = 1067.2 hp\n", "Case(c): Internal torque developed , T_int = 1557 lb-ft\n", "Case(d): Motor efficiency , \u03b7 = 93.7 percent\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.7, Page number 244" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "P_o = 2000.0 #Total power consumed by a factory from the transformer(kW)\n", "pf_tr = 0.6 #Lagging power factor at which power is consumed from the transformer\n", "V_L = 6000.0 #Primary line voltage of a transformer(V)\n", "P = 750.0 #Power expected to be delivered by the dc motor-generator(kW)\n", "hp = 1000.0 #Rating of the motor(hp)\n", "V_L_m = 6000.0 #Line voltage of a synchronous motor(V)\n", "pf_sm = 0.8 #Leading power factor of the synchronous motor\n", "pf_im = 0.8 #Lagging power factor of the induction motor\n", "n = 0.92 #Efficiency of each motor\n", "\n", "#Calculation\n", "#Case(a)\n", "P_m_a = hp*746/n #Induction/synchronous motor load(kW)\n", "I_1_a = P_m_a/(3**0.5*V_L*pf_im)*cmath.exp(1j*-math.acos(pf_im)) #Lagging current drawn by induction motor(A)\n", "I_1_prime = P_o*1000/(3**0.5*V_L*pf_tr)*cmath.exp(1j*-math.acos(pf_tr)) #Original lagging factory load current(A)\n", "I_TM = I_1_a+I_1_prime #Total load current(A)\n", "angle_I_TM = cmath.phase(I_TM)*180/math.pi #Angle of total load current(degree)\n", "PF_1 = math.cos(angle_I_TM*math.pi/180) #Overall sysytem PF\n", "#Case(b)\n", "I_s1 = P_m_a/(3**0.5*V_L*pf_sm)*cmath.exp(1j*math.acos(pf_sm)) #Leading current drawn by synchronous motor(A)\n", "I_TSM = I_s1+I_1_prime #Total load current(A)\n", "angle_I_TSM = cmath.phase(I_TSM)*180/math.pi #Angle of total load current(degree)\n", "PF_2 = math.cos(angle_I_TSM*math.pi/180) #Overall sysytem PF\n", "#Case(c)\n", "percent_I_L = (abs(I_TM)-abs(I_TSM))/abs(I_TM)*100 #Percent reduction in total load current(%)\n", "\n", "#Result\n", "print('Case(a): Total load current of the induction motor , I_TM = %.1f\u2220%.1f\u00b0 A' %(abs(I_TM),angle_I_TM))\n", "print(' Power factor of the induction motor , Overall system PF = %.4f lagging' %PF_1)\n", "print('Case(b): Total load current of the synchronous motor , I_TSM = %.1f\u2220%.1f\u00b0 A' %(abs(I_TSM),angle_I_TSM))\n", "print(' Power factor of the synchronous motor , Overall system PF = %.1f lagging' %PF_2)\n", "print('Case(c): Percent reduction in total load current = %.1f percent' %percent_I_L)\n", "print('Case(d): PF improvement: Using the synchronous motor raises the total system PF from %.4f lagging to %.1f lagging' %(PF_1,PF_2))\n", "print('\\nNOTE: Changes in obtained answer is due to precision and error in some data in the textbook solution')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Total load current of the induction motor , I_TM = 415.3\u2220-49.4\u00b0 A\n", " Power factor of the induction motor , Overall system PF = 0.6513 lagging\n", "Case(b): Total load current of the synchronous motor , I_TSM = 335.3\u2220-36.2\u00b0 A\n", " Power factor of the synchronous motor , Overall system PF = 0.8 lagging\n", "Case(c): Percent reduction in total load current = 19.3 percent\n", "Case(d): PF improvement: Using the synchronous motor raises the total system PF from 0.6513 lagging to 0.8 lagging\n", "\n", "NOTE: Changes in obtained answer is due to precision and error in some data in the textbook solution\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.8, Page number 245" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "\n", "#Variable declaration\n", "P = 6.0 #Number of poles\n", "f = 60.0 #Frequency(Hz)\n", "V_L = 440.0 #Line voltage(V)\n", "alpha = 20.0 #At no-load, the rotor is retarded 0.5 mechanical degree from its synchronous position\n", "X_s = 2.4 #Synchronous reactance(ohm)\n", "R_a = 0.1 #Effective armature resistance(ohm)\n", "E_gp = 240.0 #Generated phase voltage(V)\n", "V_p = V_L/3**0.5 #Phase voltage(V)\n", "\n", "#Calculation\n", "S = 120*f/P #Speed(rpm)\n", "T_p = 7.04*E_gp*V_p*math.sin(alpha*math.pi/180)/(S*X_s) #Torque developed per phase(lb-ft)\n", "Horsepower = 3*T_p*S/5252 #Total horsepower developed(hp)\n", "\n", "#Result\n", "print('Case(a): Torque developed per phase , T_p = %.2f lb-ft' %T_p)\n", "print('Case(b): Total horsepower developed , Horsepower = %.1f hp' %Horsepower)" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Torque developed per phase , T_p = 50.97 lb-ft\n", "Case(b): Total horsepower developed , Horsepower = 34.9 hp\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.9, Page number 251" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "P_o = 2000.0 #Total power consumed by a factory(kW) \n", "pf = 0.6 #Lagging power factor\n", "V = 6000.0 #Line voltage(V)\n", "loss = 275.0 #Synchronous capacitor losses(kW)\n", "\n", "#Calculation\n", "#Case(a)\n", "S_o_conjugate = P_o/pf #Apparent complex power(kW)\n", "sin_theta = (1-pf**2)**0.5 #Sin\u03b8\n", "jQ_o = S_o_conjugate*sin_theta #Original kilovars of lagging load(kvar)\n", "#Case(b)\n", "jQ_c = -jQ_o #Kilovars of correction needed to bring the PF to unity(kvar)\n", "#Case(c)\n", "R = loss #Synchronous capacitor losses(kW)\n", "S_c_conjugate = complex(R,jQ_c) #kVA rating of the synchronous capacitor(kVA)\n", "angle_S_c_conjugate = cmath.phase(S_c_conjugate)*180/math.pi #Angle of #kVA rating of the synchronous capacitor(degree)\n", "PF = math.cos(angle_S_c_conjugate*math.pi/180) #Power factor of the synchronous capacitor\n", "#Case(d)\n", "I_o = S_o_conjugate*1000/V #Original current drawn from the mains(A)\n", "#Case(e)\n", "P_f = P_o+loss #Total power(kW)\n", "S_f = P_f #Total apparent power(kW)\n", "I_f = S_f*1000/V #Final current drawn from the mains after correction(A)\n", "\n", "#Result\n", "print('Case(a): Original kilovars of lagging load , jQ_o = j%.1f kvar' %jQ_o)\n", "print('Case(b): Kilovars of correction needed to bring the PF to unity , -jQ_c = %.1fj kvar' %jQ_c)\n", "print('Case(c): kVA rating of the synchronous capacitor , S_*c = %.f\u2220%.1f\u00b0 kVA' %(abs(S_c_conjugate),angle_S_c_conjugate))\n", "print(' Power factor of the synchronous capacitor = %.3f leading' %PF)\n", "print('Case(d): Original current drawn from the mains , I_o = %.1f A' %I_o)\n", "print('Case(e): Final current drawn from the mains after correction , I_f = %.1f A' %I_f)\n", "print('Case(f): See fig.8-25 in textbook page no.251')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Original kilovars of lagging load , jQ_o = j2666.7 kvar\n", "Case(b): Kilovars of correction needed to bring the PF to unity , -jQ_c = -2666.7j kvar\n", "Case(c): kVA rating of the synchronous capacitor , S_*c = 2681\u2220-84.1\u00b0 kVA\n", " Power factor of the synchronous capacitor = 0.103 leading\n", "Case(d): Original current drawn from the mains , I_o = 555.6 A\n", "Case(e): Final current drawn from the mains after correction , I_f = 379.2 A\n", "Case(f): See fig.8-25 in textbook page no.251\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.10, Page number 254" ] }, { "cell_type": "code", "collapsed": false, "input": [ "#Variable declaration\n", "kVA = 10000.0 #Rating of a system(kVA)\n", "PF = 0.65 #Power factor of the system\n", "PF_2 = 0.85 #Raised lagging PF\n", "cost = 60.0 #Cost of the synchronous capacitor to improve the PF($/kVA)\n", "\n", "#Calculation\n", "#Case(a)\n", "kW_a = kVA*PF #Power(kW)\n", "sin_theta = (1-PF**2)**0.5 #Sin\u03b8\n", "kvar = kVA*sin_theta #Reactive power(kvar)\n", "kVA_a = kvar\n", "cost_cap_a = kVA_a*cost #Cost of raising the PF to unity PF($)\n", "#Case(b)\n", "kVA_b = kW_a/PF_2 #kVA of final system(kVA)\n", "sin_theta_b = (1-PF_2**2)**0.5 #Sin\u03b8\n", "kvar_b = kVA_b*sin_theta_b #kvar of final system(kvar)\n", "kvar_add = kvar-kvar_b #kvar of correction added(kvar)\n", "kVA_b = kvar_add\n", "cost_cap_b = kVA_b*cost #Cost of raising the PF to 0.85 PF($)\n", "\n", "#Result\n", "print('Case(a): Cost of raising the PF to Unity PF = $%.f ' %cost_cap_a)\n", "print('Case(b): Cost of raising the PF to 0.85 PF lagging = $%.f ' %cost_cap_b)\n", "print('\\nNOTE: Slight variations in the obtained answer is due to non-approximation of the values while calculating in python')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Cost of raising the PF to Unity PF = $455961 \n", "Case(b): Cost of raising the PF to 0.85 PF lagging = $214260 \n", "\n", "NOTE: Slight variations in the obtained answer is due to non-approximation of the values while calculating in python\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.11, Page number 255" ] }, { "cell_type": "code", "collapsed": false, "input": [ "#Variable declaration\n", "S_conjugate = 1000.0 #Apparent complex power(kVA)\n", "PF = 0.6 #Lagging PF\n", "\n", "#Calculation\n", "P_o = S_conjugate*PF #Active power dissipated by the load(kW)\n", "sin_theta = (1-PF**2)**0.5 #Sin\u03b8\n", "jQ_o = S_conjugate*sin_theta #Inductive reactive quadrature power drawn from and returned to the supply(kvar)\n", "\n", "#Result\n", "print('Case(a): Active(true) power originally dissipated by load , P_o = %.f kW' %P_o)\n", "print('Case(b): Inductive reactive quadrature power drawn from and returned to supply , +jQ_o = j%.f kvar' %jQ_o)\n", "print('Case(c): The original power triangle is shown in Fig.8-26a in textbook page no.255')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Active(true) power originally dissipated by load , P_o = 600 kW\n", "Case(b): Inductive reactive quadrature power drawn from and returned to supply , +jQ_o = j800 kvar\n", "Case(c): The original power triangle is shown in Fig.8-26a in textbook page no.255\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.12, Page number 255" ] }, { "cell_type": "code", "collapsed": false, "input": [ "#Variable declaration\n", "S_conjugate = 1000.0 #Apparent complex power(kVA)\n", "PF = 0.8 #Lagging PF\n", "jQ_o = 800.0 #Inductive reactive quadrature power drawn from and returned to the supply(kvar)\n", "P_o = 600.0 #Active power dissipated by the load(kW)\n", "PF1 = 0.6 #Lagging PF from ex 8.11\n", "\n", "#Calculation\n", "P_f = S_conjugate*PF #Final active power supplied by the alternator(kW)\n", "sin_theta = (1-PF**2)**0.5 #Sin\u03b8\n", "jQ_f = S_conjugate*sin_theta #Reactive power stored and returned to the supply(kvar)\n", "P_a = P_f-P_o #Additional active power that may be supplied to new consumer(kW)\n", "jQ_a = jQ_f-jQ_o #Correction kilovars required to raise PF from 0.6 to 0.8 lagging(kvar)\n", "S_c = 0-jQ_a #Rating of correction capacitors needed(kVA)\n", "\n", "#Result\n", "print('Case(a): Final active power supplied by the alternator , P_f = %.f kW' %P_f)\n", "print('Case(b): Reactive power stored and returned to the supply , +jQ_f = j%.f kvar' %jQ_f)\n", "print('Case(c): Additional active power that may be supplied to new consumer , P_a = %.f kW' %P_a)\n", "print('Case(d): Correction kilovars required to raise PF from 0.6 to 0.8 lagging , -jQ_a = %.fj kvar' %jQ_a)\n", "print('Case(e): Rating of correction capacitors needed to accomplish above correction , S_*c = %.f kVA' %S_c)\n", "print('Case(f): The power tabulation grid is shown below:')\n", "print('_____________________________________________________________________')\n", "print('\\t P(kW) \\t \u00b1jQ(kvar) \\t S*(kVA) \\t Lagging cos\u03b8')\n", "print('_____________________________________________________________________')\n", "print('Original %.f \\t\\t j%.f \\t\\t %.f \\t\\t %.1f ' %(P_o,jQ_o,S_conjugate,PF1))\n", "print('Added %.f \\t\\t %.fj \\t - \\t\\t - ' %(P_a,jQ_a))\n", "print('Final %.f \\t\\t j%.f \\t\\t %.f \\t\\t %.1f ' %(P_f,jQ_f,S_conjugate,PF))\n", "print('_____________________________________________________________________')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Final active power supplied by the alternator , P_f = 800 kW\n", "Case(b): Reactive power stored and returned to the supply , +jQ_f = j600 kvar\n", "Case(c): Additional active power that may be supplied to new consumer , P_a = 200 kW\n", "Case(d): Correction kilovars required to raise PF from 0.6 to 0.8 lagging , -jQ_a = -200j kvar\n", "Case(e): Rating of correction capacitors needed to accomplish above correction , S_*c = 200 kVA\n", "Case(f): The power tabulation grid is shown below:\n", "_____________________________________________________________________\n", "\t P(kW) \t \u00b1jQ(kvar) \t S*(kVA) \t Lagging cos\u03b8\n", "_____________________________________________________________________\n", "Original 600 \t\t j800 \t\t 1000 \t\t 0.6 \n", "Added 200 \t\t -200j \t - \t\t - \n", "Final 800 \t\t j600 \t\t 1000 \t\t 0.8 \n", "_____________________________________________________________________\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.13, Page number 256" ] }, { "cell_type": "code", "collapsed": false, "input": [ "#Variable declaration\n", "S_conjugate = 1000.0 #Apparent complex power(kVA)\n", "PF = 1.0 #Unity PF\n", "jQ_o = 800.0 #Inductive reactive quadrature power drawn from and returned to the supply(kvar)\n", "P_o = 600.0 #Active power dissipated by the load(kW)\n", "PF1 = 0.6 #Lagging PF from ex 8.11\n", "\n", "#Calculation\n", "P_f = S_conjugate*PF #Final active power supplied by the alternator(kW)\n", "sin_theta = (1-PF**2)**0.5 #Sin\u03b8\n", "jQ_f = S_conjugate*sin_theta #Reactive power stored and returned to the supply(kvar)\n", "P_a = P_f-P_o #Additional active power that may be supplied to new consumer(kW)\n", "jQ_a = jQ_f-jQ_o #Correction kilovars required to raise PF from 0.6 to 0.8 lagging(kvar)\n", "S_c = 0-jQ_a #Rating of correction capacitors needed(kVA)\n", "\n", "#Result\n", "print('Case(a): Final active power supplied by the alternator , P_f = %.f kW' %P_f)\n", "print('Case(b): Reactive power stored and returned to the supply , +jQ_f = j%.f kvar' %jQ_f)\n", "print('Case(c): Additional active power that may be supplied to new consumer , P_a = %.f kW' %P_a)\n", "print('Case(d): Correction kilovars required to raise PF from 0.6 to 0.8 lagging , -jQ_a = %.fj kvar' %jQ_a)\n", "print('Case(e): Rating of correction capacitors needed to accomplish above correction , S_*c = %.f kVA' %S_c)\n", "print('Case(f): The power tabulation grid is shown below:')\n", "print('_____________________________________________________________________')\n", "print('\\t P(kW) \\t \u00b1jQ(kvar) \\t S*(kVA) \\t cos\u03b8')\n", "print('_____________________________________________________________________')\n", "print('Original %.f \\t\\t j%.f \\t\\t %.f \\t\\t %.1f ' %(P_o,jQ_o,S_conjugate,PF1))\n", "print('Added %.f \\t\\t %.fj \\t - \\t\\t - ' %(P_a,jQ_a))\n", "print('Final %.f \\t\\t %.f \\t\\t %.f \\t\\t %.1f ' %(P_f,jQ_f,S_conjugate,PF))\n", "print('_____________________________________________________________________')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Final active power supplied by the alternator , P_f = 1000 kW\n", "Case(b): Reactive power stored and returned to the supply , +jQ_f = j0 kvar\n", "Case(c): Additional active power that may be supplied to new consumer , P_a = 400 kW\n", "Case(d): Correction kilovars required to raise PF from 0.6 to 0.8 lagging , -jQ_a = -800j kvar\n", "Case(e): Rating of correction capacitors needed to accomplish above correction , S_*c = 800 kVA\n", "Case(f): The power tabulation grid is shown below:\n", "_____________________________________________________________________\n", "\t P(kW) \t \u00b1jQ(kvar) \t S*(kVA) \t cos\u03b8\n", "_____________________________________________________________________\n", "Original 600 \t\t j800 \t\t 1000 \t\t 0.6 \n", "Added 400 \t\t -800j \t - \t\t - \n", "Final 1000 \t\t 0 \t\t 1000 \t\t 1.0 \n", "_____________________________________________________________________\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.14, Page number 256" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "P_o = 2000.0 #Load drawn by a factory(kW)\n", "pf_o = 0.6 #Lagging PF\n", "pf_f = 0.85 #lagging PF required\n", "P_a = 275.0 #Losses in the synchronous capacitor(kW)\n", "\n", "#Calculation\n", "S_o_conjugate = P_o/pf_o #Original kVA load drawn from the utility(kVA) \n", "sin_theta_o = (1-pf_o**2)**0.5 #Sin\u03b8\n", "jQ_o = S_o_conjugate*sin_theta_o #Original lagging kilovars(kvar)\n", "P_f = P_o+P_a #Final system active power consumed from the utility(kW)\n", "S_f_conjugate = (P_f/pf_f)*cmath.exp(1j*-math.acos(pf_f)) #Final kVA load drawn from the utility(kVA)\n", "sin_theta_f = (1-pf_f**2)**0.5 #Sin\u03b8\n", "jQ_f = abs(S_f_conjugate)*sin_theta_f #Final lagging kvar\n", "jQ_a = jQ_f-jQ_o #Correction kvar produced by the synchronous capacitor(kvar)\n", "S_a_conjugate = complex(P_a,jQ_a) #kVA rating of the synchronous capacitor(kVA)\n", "angle_S_a_conjugate = cmath.phase(S_a_conjugate)*180/math.pi #Angle(degree)\n", "pf_S_a_conjugate = math.cos(angle_S_a_conjugate*math.pi/180) #Leading PF\n", "\n", "#Result\n", "print('Case(a): Original kVA load drawn from the utility , S_*o = %.1f kVA' %S_o_conjugate)\n", "print('Case(b): Original lagging kilovars , jQ_o = j%.f kvar' %jQ_o)\n", "print('Case(c): Final system active power consumed from the utility , P_f = %.f kW' %P_f)\n", "print('Case(d): Final kVA load drawn from the utility , S_*f = %.1f\u2220%.1f\u00b0 kVA' %(abs(S_f_conjugate),cmath.phase(S_f_conjugate)*180/math.pi))\n", "print('Case(e): Correction kilovars produced by the synchronous capacitor , -jQ_a = %.fj kvar' %jQ_a)\n", "print('Case(f): kVA rating of the synchronous capacitor , S_*a = %.f\u2220%.2f\u00b0 kVA' %(abs(S_a_conjugate),cmath.phase(S_a_conjugate)*180/math.pi))\n", "print('Case(g): Power tabulation grid: ')\n", "print('_____________________________________________________________________')\n", "print('\\t P(kW) \\t \u00b1jQ(kvar) \\t S*(kVA) \\t cos\u03b8')\n", "print('_____________________________________________________________________')\n", "print('Original %.f \\t\\t j%.f \\t %.1f \\t\\t %.1f lag' %(P_o,jQ_o,S_o_conjugate,pf_o))\n", "print('Added %.f \\t\\t %.fj \\t %.f \\t\\t %.3f lead' %(P_a,jQ_a,abs(S_a_conjugate),pf_S_a_conjugate))\n", "print('Final %.f \\t\\t j%.f \\t %.1f \\t\\t %.2f lag' %(P_f,jQ_f,abs(S_f_conjugate),pf_f))\n", "print('_____________________________________________________________________')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Original kVA load drawn from the utility , S_*o = 3333.3 kVA\n", "Case(b): Original lagging kilovars , jQ_o = j2667 kvar\n", "Case(c): Final system active power consumed from the utility , P_f = 2275 kW\n", "Case(d): Final kVA load drawn from the utility , S_*f = 2676.5\u2220-31.8\u00b0 kVA\n", "Case(e): Correction kilovars produced by the synchronous capacitor , -jQ_a = -1257j kvar\n", "Case(f): kVA rating of the synchronous capacitor , S_*a = 1286\u2220-77.66\u00b0 kVA\n", "Case(g): Power tabulation grid: \n", "_____________________________________________________________________\n", "\t P(kW) \t \u00b1jQ(kvar) \t S*(kVA) \t cos\u03b8\n", "_____________________________________________________________________\n", "Original 2000 \t\t j2667 \t 3333.3 \t\t 0.6 lag\n", "Added 275 \t\t -1257j \t 1286 \t\t 0.214 lead\n", "Final 2275 \t\t j1410 \t 2676.5 \t\t 0.85 lag\n", "_____________________________________________________________________\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.15, Page number 257" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "S_f_conjugate = 3333.3 #Rating of alternator(kVA)\n", "S_o_conjugate = complex(2275,1410) #Load(kVA)\n", "PF = 0.8 #Lagging power factor\n", "\n", "#Calculation\n", "#Case(a)\n", "a = 1.0 #Co-efficient of x^2\n", "b = 5332.0 #Co-efficient of x\n", "c = -3947163.0 #Constant\n", "sol_1 = (-b+(b**2-4*a*c)**0.5)/(2*a) #Solution 1\n", "sol_2 = (-b-(b**2-4*a*c)**0.5)/(2*a) #Solution 1\n", "x = sol_1\n", "#Case(b)\n", "P_a = PF*x #Added active power of the additional load(kW)\n", "sin_theta = (1-PF**2)**0.5 #Sin\u03b8\n", "Q_a = sin_theta*x #Added reactive power of the additional load(kvar)\n", "#Case(c)\n", "P_o = S_o_conjugate.real #Real power(kW)\n", "Q_o = S_o_conjugate.imag #Reactive power(kvar)\n", "P_f = P_o+P_a #Final active power supplied by alternator(kW)\n", "Q_f = Q_o+Q_a #Final reactive power supplied by alternator(kvar)\n", "#Case(d)\n", "PF_final = P_f/S_f_conjugate #Final PF of the alternator\n", "\n", "#Result\n", "print('Case(a): Additional kVA load that may be added without overloading the alternator , x = S_*a = %.2f kVA' %x)\n", "print('Case(b): Added active power of the additional load , P_a = %.1f kW' %P_a)\n", "print(' Added reactive power of the additional load , Q_a = j%.2f kvar' %Q_a)\n", "print('Case(c): Final active power supplied by alternator , P_f = %.1f kW' %P_f)\n", "print(' Final reactive power supplied by alternator , Q_f = j%.1f kvar' %Q_f)\n", "print('Case(d): Final PF of the alternator , PF = %.3f lagging' %PF_final)\n", "print('Power tabulation grid: ')\n", "print('_____________________________________________________________________')\n", "print('\\t P(kW) \\t \u00b1jQ(kvar) \\t S*(kVA) \\t cos\u03b8')\n", "print('_____________________________________________________________________')\n", "print('Original %.f \\t\\t j%.f \\t %.1f \\t\\t %.2f lag' %(P_o,Q_o,abs(S_o_conjugate),math.cos(cmath.phase(S_o_conjugate))))\n", "print('Added %.1fx \\t\\t j%.1fx \\t %.fx \\t\\t %.1f lag' %(PF,sin_theta,(PF**2+sin_theta**2),PF))\n", "print('Final (%.f+%.1fx) \\t (%.f+%.1fx) \\t %.1f \\t\\t %.3f lag' %(P_o,PF,Q_o,sin_theta,S_f_conjugate,PF_final))\n", "print('_____________________________________________________________________')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Additional kVA load that may be added without overloading the alternator , x = S_*a = 658.86 kVA\n", "Case(b): Added active power of the additional load , P_a = 527.1 kW\n", " Added reactive power of the additional load , Q_a = j395.32 kvar\n", "Case(c): Final active power supplied by alternator , P_f = 2802.1 kW\n", " Final reactive power supplied by alternator , Q_f = j1805.3 kvar\n", "Case(d): Final PF of the alternator , PF = 0.841 lagging\n", "Power tabulation grid: \n", "_____________________________________________________________________\n", "\t P(kW) \t \u00b1jQ(kvar) \t S*(kVA) \t cos\u03b8\n", "_____________________________________________________________________\n", "Original 2275 \t\t j1410 \t 2676.5 \t\t 0.85 lag\n", "Added 0.8x \t\t j0.6x \t 1x \t\t 0.8 lag\n", "Final (2275+0.8x) \t (1410+0.6x) \t 3333.3 \t\t 0.841 lag\n", "_____________________________________________________________________\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.16, Page number 258" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "S_o_conjugate = complex(2275,1410) #Load(kVA)\n", "theta_S_o_conjugate = cmath.phase(S_o_conjugate)*180/math.pi #Angle of load(degree)\n", "S_a_conjugate = complex(527.1,395.32) #Additional load(kVA)\n", "theta_S_a_conjugate = cmath.phase(S_a_conjugate)*180/math.pi #Angle of additional load(degree)\n", "S_f_conjugate = complex(2802.1,1805.32) #Final load(kVA)\n", "theta_S_f_conjugate = cmath.phase(S_f_conjugate)*180/math.pi #Angle of final load(degree)\n", "\n", "#Calculation\n", "x = S_o_conjugate+S_a_conjugate+(-S_f_conjugate) #Tellegens theorem\n", "\n", "#Result\n", "if(x==0):\n", " print('Validity is checked Tellegens theorem , S_*o + S_*a + (_S_*f) = %.f' %abs(x))\n", "else:\n", " print('Validity is not checked')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Validity is checked Tellegens theorem , S_*o + S_*a + (_S_*f) = 0\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.17, Page number 258" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "kW = 40000.0 #Load on a factory(kW)\n", "PF = 0.8 #Lagging PF\n", "hp = 7500.0 #Power rating of the induction motor(hp)\n", "PF_IM = 0.75 #Lagging PF of the induction motor\n", "n = 0.91 #Efficiency of induction motor\n", "PF_SM = 1.0 #Power factor of the synchronous motor\n", "\n", "#Calculation\n", "kVA_original = kW/PF #Original kVA\n", "sin_theta = (1-PF**2)**0.5 #Sin\u03b8\n", "kvar_original = kVA_original*sin_theta #Original kvar\n", "kW_IM = hp*746/(1000*n) #Induction motor(kW)\n", "kVA_IM = kW_IM/PF_IM #Induction motor(kVA)\n", "sin_theta_IM = (1-PF_IM**2)**0.5 #Sin\u03b8\n", "kvar_IM = kVA_IM*sin_theta_IM #Induction motor(kvar)\n", "kvar_final = kvar_original-kvar_IM #Final kvar\n", "kVA_final = complex(kW,kvar_final) #Final kVA\n", "angle_kVA_final = cmath.phase(kVA_final)*180/math.pi #Angle of Final kVA(degree)\n", "PF_final = math.cos(angle_kVA_final*math.pi/180) #Final power factor\n", "\n", "#Result\n", "print('Overall system PF using a unity PF synchronous motor , Final PF = %.3f lagging' %PF_final)" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Overall system PF using a unity PF synchronous motor , Final PF = 0.852 lagging\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.18, Page number 259" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "kW = 40000.0 #Load on a factory(kW)\n", "PF = 0.8 #Lagging PF\n", "hp = 7500.0 #Power rating of the synchronous motor(hp)\n", "PF_SM = 0.8 #Lagging PF of the synchronous motor\n", "n = 0.91 #Efficiency of synchronous motor\n", "hp_IM = 7500.0 #Power rating of the induction motor(hp)\n", "PF_IM = 0.75 #Lagging PF of the induction motor\n", "\n", "\n", "#Calculation\n", "kVA_original = kW/PF #Original kVA\n", "sin_theta = (1-PF**2)**0.5 #Sin\u03b8\n", "kvar_original = kVA_original*sin_theta #Original kvar\n", "kW_IM = hp_IM*746/(1000*n) #Induction motor(kW)\n", "kVA_IM = kW_IM/PF_IM #Induction motor(kVA)\n", "sin_theta_IM = (1-PF_IM**2)**0.5 #Sin\u03b8\n", "kvar_IM = kVA_IM*sin_theta_IM #Induction motor(kvar)\n", "kvar_final_IM = kvar_original-kvar_IM #Final kvar\n", "kW_SM = hp*746/(1000*n) #synchronous motor(kW)\n", "kVA_SM = kW_SM/PF_SM #synchronous motor(kVA)\n", "sin_theta_SM = (1-PF_SM**2)**0.5 #Sin\u03b8\n", "kvar_SM = kVA_SM*sin_theta_SM #synchronous(kvar)\n", "kvar_final = kvar_original-kvar_SM-kvar_IM #Final kvar\n", "kVA_final = complex(kW,kvar_final) #Final kVA\n", "angle_kVA_final = cmath.phase(kVA_final)*180/math.pi #Angle of Final kVA(degree)\n", "PF_final = math.cos(angle_kVA_final*math.pi/180) #Final power factor\n", "\n", "#Result\n", "print('Case(a): Overall system PF using a unity PF synchronous motor , Final PF = %.3f lagging' %PF_final)\n", "print('Case(b): In Ex.8-17, a 6148 kVA, unity PF, 7500 hp synchronous motor is needed. In Ex.8-18, a 7685 kVA, 0.8 PF leading, 7500 hp synchronous motor is needed')\n", "print(' Ex.8-18b shows that a 0.8 PF leading, 7500 hp synchronous motor must be physically larger than a unity PF, 7500 hp synchronous motor because of its higher kVA rating')" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): Overall system PF using a unity PF synchronous motor , Final PF = 0.895 lagging\n", "Case(b): In Ex.8-17, a 6148 kVA, unity PF, 7500 hp synchronous motor is needed. In Ex.8-18, a 7685 kVA, 0.8 PF leading, 7500 hp synchronous motor is needed\n", " Ex.8-18b shows that a 0.8 PF leading, 7500 hp synchronous motor must be physically larger than a unity PF, 7500 hp synchronous motor because of its higher kVA rating\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.19, Page number 259" ] }, { "cell_type": "code", "collapsed": false, "input": [ "import math\n", "import cmath\n", "\n", "#Variable declaration\n", "kVA_load = 500.0 #Load(kVA)\n", "PF_load = 0.65 #Lagging PF of load\n", "hp = 200.0 #Power rating of the system(hp)\n", "n = 0.88 #Efficiency of the system after adding the load\n", "PF_final = 0.85 #Final lagging PF after adding the load\n", "\n", "#Calculation\n", "kW_original = kVA_load*PF_load #Original kW\n", "sin_theta_load = (1-PF_load**2)**0.5 #Sin\u03b8\n", "kvar_original = kVA_load*sin_theta_load #Original kvar\n", "kW_SM = hp*746/(1000*n) #Synchronous motor kW\n", "#Case(a)\n", "kW_final = kW_original+kW_SM #Final kW of the system with the motor added\n", "kVA_final = kW_final/PF_final #Final kVA of the system with the motor added\n", "PF_system = kW_final/kVA_final #Final PF of the system with the motor added\n", "sin_theta_system = (1-PF_final**2)**0.5 #Sin\u03b8\n", "kvar_final = kVA_final*sin_theta_system #Final kvar of the system with the motor added\n", "#Case(b)\n", "kvar_SM = kvar_final-kvar_original #kvar rating of the synchronous motor\n", "kVA_SM = complex(kW_SM,kvar_SM) #kVA rating of the synchronous motor\n", "kVA_SM_a = cmath.phase(kVA_SM)*180/math.pi #Angle of kVA rating of the synchronous motor(degree)\n", "PF_SM = math.cos(kVA_SM_a*math.pi/180) #PF of the sychronous motor\n", "\n", "#Result\n", "print('Case(a): kVA of the system with the motor added , Final kVA = %.f kVA' %kVA_final)\n", "print(' PF of the system with the motor added , System PF = %.2f lagging' %PF_system)\n", "print('Case(b): kVA of the synchronous motor , Synchronous motor kVa = %.f\u2220%.1f\u00b0 kVA' %(abs(kVA_SM),kVA_SM_a))\n", "print(' PF of the synchronous motor at which it operates , Synchronous motor PF = %.3f leading' %PF_SM)" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "Case(a): kVA of the system with the motor added , Final kVA = 582 kVA\n", " PF of the system with the motor added , System PF = 0.85 lagging\n", "Case(b): kVA of the synchronous motor , Synchronous motor kVa = 185\u2220-23.4\u00b0 kVA\n", " PF of the synchronous motor at which it operates , Synchronous motor PF = 0.918 leading\n" ] } ], "prompt_number": 1 }, { "cell_type": "heading", "level": 2, "metadata": {}, "source": [ "Example 8.20, Page number 261" ] }, { "cell_type": "code", "collapsed": false, "input": [ "#Variable declaration\n", "f_m = 60.0 #Frequency of motor(Hz)\n", "f_a = 4000.0 #Frequency of alternator(Hz)\n", "\n", "#Calculation\n", "Pole_ratio = f_a/f_m #Ratio of number of poles in alternator to that of motor\n", "P_a = 20.0\n", "P_m = 3.0\n", "P_a1 = 2*P_a #First combination must have 40 poles on the alternator\n", "P_m1 = 2*P_m #First combination must have 6 poles on the synchronous motor\n", "S_1 = 120*f_m/P_m1 #Speed of motor and alternator(rpm)\n", "P_a2 = 4*P_a #Second combination must have 40 poles on the alternator\n", "P_m2 = 4*P_m #Second combination must have 6 poles on the synchronous motor\n", "S_2 = 120*f_m/P_m2 #Speed of motor and alternator(rpm)\n", "P_a3 = 6*P_a #Third combination must have 40 poles on the alternator\n", "P_m3 = 6*P_m #Third combination must have 6 poles on the synchronous motor\n", "S_3 = 120*f_m/P_m3 #Speed of motor and alternator(rpm)\n", "\n", "#Result\n", "print('First combination have %.f poles on the alternator and %.f poles on the synchronous motor at a speed %.f rpm' %(P_a1,P_m1,S_1))\n", "print('Second combination have %.f poles on the alternator and %.f poles on the synchronous motor at a speed %.f rpm' %(P_a2,P_m2,S_2))\n", "print('Third combination have %.f poles on the alternator and %.f poles on the synchronous motor at a speed %.f rpm' %(P_a3,P_m3,S_3))" ], "language": "python", "metadata": {}, "outputs": [ { "output_type": "stream", "stream": "stdout", "text": [ "First combination have 40 poles on the alternator and 6 poles on the synchronous motor at a speed 1200 rpm\n", "Second combination have 80 poles on the alternator and 12 poles on the synchronous motor at a speed 600 rpm\n", "Third combination have 120 poles on the alternator and 18 poles on the synchronous motor at a speed 400 rpm\n" ] } ], "prompt_number": 1 } ], "metadata": {} } ] }