diff options
Diffstat (limited to 'Optical_Fiber_Communication_Principles_and_Practice/Chapter9.ipynb')
| -rwxr-xr-x | Optical_Fiber_Communication_Principles_and_Practice/Chapter9.ipynb | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/Optical_Fiber_Communication_Principles_and_Practice/Chapter9.ipynb b/Optical_Fiber_Communication_Principles_and_Practice/Chapter9.ipynb new file mode 100755 index 00000000..42d197be --- /dev/null +++ b/Optical_Fiber_Communication_Principles_and_Practice/Chapter9.ipynb @@ -0,0 +1,188 @@ +{ + "metadata": { + "name": "Chapter_9" + }, + "nbformat": 3, + "nbformat_minor": 0, + "worksheets": [ + { + "cells": [ + { + "cell_type": "heading", + "level": 1, + "metadata": {}, + "source": "Chapter 9 :Direct detection receiver performance considerations\n" + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.1, page 506" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\nzm=20.7 #average number of photons\nh=6.626*10**-34 #plancks constant\nf=2.998*10**14 #frequency in hertz \nn=1 #for ideal detector\nBt=10**7 #bit rate\n\n#Calculation\npo=zm*h*f*Bt/(2*n) #output power in binary\npod=10*math.log10(po) #output power in dBW\npod1=10*math.log10(po*10**3) #output power in dBm\n\n#Result\nprint'Minimum incident optical power = %.1f dBW'%(pod)\nprint' = %.1f dBm'%(pod1)", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "Minimum incident optical power = -106.9 dBW\n = -76.9 dBm\n" + } + ], + "prompt_number": 26 + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.2, page 508" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\nsn=50/10 #signal to noise ratio in dB\nf=2.998*10**14 #frequency in hertz\nn=1 #for an ideal detector\nB=5*10**6 #bandwidth\nh=6.626*10**-34 #plancks constant\n\n#Calculation\nSN=10**(sn) \npo=SN*f*2*h*B/n #incident optical power\npdb=10*math.log10(po*10**3) #incident optical power in dB\n\n#Result\nprint'Incident optical power = %.1f nW '%(po*10**9)\nprint' in dB = %.1f dBm'%(pdb)", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "Incident optical power = 198.6 nW \n in dB = -37.0 dBm\n" + } + ], + "prompt_number": 3 + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.3, page 512" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\npo=200*10**-9 #incident optical power in W\ne=1.602*10**-19 #1 electron volt\nh=0.9*10**-6 #operating wavelength\nh1=6.626*10**-34 #plancks constant\nc=2.998*10**8 #speed of light\nK=1.38*10**-23 #boltzman constant\nT=293 #tempreture in kelvin\nn=0.6 #quantum efficiency\nB=5*10**6 #post-detection bandwidth \nib=3*10**-9 #dark current in ampere\nRl=4*10**3 #load resistance\n\n#Calculation\nip=n*po*e*h/(h1*c) #photocurrent\ni2=2*e*B*(ib+ip) #total shot noise current\ni2rms=math.sqrt(i2) #RMS value \nit=4*K*T*B/Rl #thermal noise current\nitrms=math.sqrt(it) #RMS value\n\n#Result\nprint'RMS shot noise current = %.2f x10^-10 A'%(i2rms*10**10)\nprint'RMS thermal noise current = %.2f x10^-9 A'%(itrms*10**9)", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "RMS shot noise current = 3.80 x10^-10 A\nRMS thermal noise current = 4.50 x10^-9 A\n" + } + ], + "prompt_number": 4 + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.4, page 514" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\nip=87.1*10**-9 #photocurrent\nits=1.44*10**-19 #rms shot noise current \nit=2.02*10**-17 #rms thermal noise current\nfd=0.3 #frequency in 3 dB\n\n#Calculation\nf=10**(fd)\nsn=ip**2/(its+(it*f)) #signal to noise ratio\nsnr=10*math.log10(sn) #signal to noise ratio in dB\n\n#Result\nprint'SNR at output = %.2f dB'%snr", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "SNR at output = 22.73 dB\n" + } + ], + "prompt_number": 39 + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.5, page 516" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\nB=8*10**6 #post detection bandwidth\nCd=6*10**-12 #capacitance in farad\nCa=12*10**-12 #input capacitance in farad\n\n\n#Calculation\nRl=1/(2*math.pi*Cd*B) #maximum load resistance\nB1=1/(2*math.pi*Rl*Ca) #maximum bandwidth\n\n#Result\nprint'Maximu load resistance = %.2f K\u03a9'%(Rl*10**-3)\nprint'Maximum bandwidth = %.1f MHz'%(B1*10**-6)", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "Maximu load resistance = 3.32 K\u03a9\nMaximum bandwidth = 4.0 MHz\n" + } + ], + "prompt_number": 9 + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.6, page 518" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\nB=50*10**6 #post detection bandwidth\nCd=5*10**-12 #capacitance in farad\ne=1.602*10**-19 #1 electron volt\nK=1.38*10**-23 #boltzman constant\nT=291 #tempreture in kelvin\nib=10**-7 #photocurrent before gain\nx=0.3\n\n#Calculation\nRl=1/(2*math.pi*Cd*B) #maximum value of the load resistor\na=2*e*B*ib #shot noise\nb=4*K*T*B/Rl #thermal noise\nsn=ib**2/(a+b) #SNR, when M = 1,\nsnd=10*math.log10(sn) #SNR in dB\nMop=((4*K*T)/(x*e*Rl*ib))**0.435\nsn1=(Mop**2*ib**2)/((2*e*B*ib*Mop**2.3)+b) #SNR, when M = Mop,\nsdb=10*math.log10(sn1) #SNR in dB\n\n#Result\nprint'SNR (M=1) = %.2f dB'%(snd)\nprint'SNR (M=Mop) = %.1f dB'%(sdb)", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "SNR (M=1) = 8.99 dB\nSNR (M=Mop) = 32.5 dB\n" + } + ], + "prompt_number": 16 + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.7, page 520" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\ne=1.602*10**-19 #1 electron volt\nK=1.38*10**-23 #boltzman constant\nT=120 #tempreture in kelvin\nB=10**7 #post detection bandwidth\nsn=3.5 #SNR/10\nfn=0.1 #noise figure/10\nRl=10**4 #load resistance\n\n#Calculation\nsn1=10**(sn)\nfn1=10**(fn)\na=12*K*T*B*fn1/Rl\nb=((4*K*T*fn1)/(1.1*e*Rl))**0.667\nIp=(sn1*a/b)**0.75 #minimum photocurrent\nMop=((4*K*T*fn1)/(e*Ip*1.1*10**3))**0.334 #optimum avalanche multiplication factor\n\n#Result\nprint'Optimum avalanche multiplication factor = %.1f '%(Mop)", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "Optimum avalanche multiplication factor = 8.9 \n" + } + ], + "prompt_number": 22 + }, + { + "cell_type": "heading", + "level": 2, + "metadata": {}, + "source": "Example 9.8, page 528" + }, + { + "cell_type": "code", + "collapsed": false, + "input": "import math\n\n#Variable declaration\nr1=4*10**6 #effective input resistance in ohm\nr2=8*10**6 #resistance in ohm\nct=6*10**-12 #total capacitance in farad\nK=1.38*10**-23 #boltzman constant\nT=300 #tempreture in kelvin\nRf=10**5 #feedback resitor\nG=400 #open loop gain\n\n#Calculation\nRt=(r1**2)/r2 #total effective load resistance\nB=1/(2*math.pi*Rt*ct) #maximum bandwidth\ni2=4*K*T/Rt #for highimpedance config\nB1=G/(2*math.pi*Rf*ct) #maximum bandwidth for transimpedance config\nit=4*K*T/(Rf) #for transimpedance\n\n#transimpedance configuration factor of 20 greater than that obtained high-input-impedance configuration.\nn=it/i2\nndb=10*math.log10(n)\n\n#Result\nprint'(a) Maximum bandwidth = %.2f x10^4 Hz'%(B*10**-4)\nprint'(b) Mean square thermal noise current (high impedance config)= %.2f x10^-27 A^2 Hz^-1'%(i2*10**27)\nprint'\\n(c) Maximum bandwidth for transimpedance = %.2f X 10^6 Hz'%(B1*10**-8)\nprint' Mean square thermal noise current (transimpedance config) = %.2f x10^-25 A^2 Hz^-1'%(it*10**25)\nprint' Ratio of these noise power = %d dB'%ndb", + "language": "python", + "metadata": {}, + "outputs": [ + { + "output_type": "stream", + "stream": "stdout", + "text": "(a) Maximum bandwidth = 1.33 x10^4 Hz\n(b) Mean square thermal noise current (high impedance config)= 8.28 x10^-27 A^2 Hz^-1\n\n(c) Maximum bandwidth for transimpedance = 1.06 X 10^6 Hz\n Mean square thermal noise current (transimpedance config) = 1.66 x10^-25 A^2 Hz^-1\n Ratio of these noise power = 13 dB\n" + } + ], + "prompt_number": 21 + } + ], + "metadata": {} + } + ] +}
\ No newline at end of file |