From 0ce09d56c7313f67385f82b912a29138f598ddeb Mon Sep 17 00:00:00 2001
From: Sumeet Koli
Date: Tue, 12 Jun 2018 11:59:29 +0530
Subject: Support for PID
---
OpenModelicaArduino/ArduinoExamples.mo | 2 +-
OpenModelicaArduino/Firmware/pidmata3.ino | 904 +++++++++++++++++++++
.../Library/linux64/libmodelPlugFirmata.so | Bin 65528 -> 56284 bytes
OpenModelicaArduino/package.mo | 70 +-
4 files changed, 974 insertions(+), 2 deletions(-)
create mode 100644 OpenModelicaArduino/Firmware/pidmata3.ino
mode change 100644 => 100755 OpenModelicaArduino/Resources/Library/linux64/libmodelPlugFirmata.so
(limited to 'OpenModelicaArduino')
diff --git a/OpenModelicaArduino/ArduinoExamples.mo b/OpenModelicaArduino/ArduinoExamples.mo
index 2e61882..3f2717f 100644
--- a/OpenModelicaArduino/ArduinoExamples.mo
+++ b/OpenModelicaArduino/ArduinoExamples.mo
@@ -14,7 +14,7 @@ package ArduinoExamples
Placement(visible = true, transformation(origin = {-3.55271e-15, -20}, extent = {{-20, -20}, {20, 20}}, rotation = 0)));
Modelica.Blocks.Sources.BooleanConstant booleanConstant1(k = true) annotation(
Placement(visible = true, transformation(origin = {-60, -20}, extent = {{-20, -20}, {20, 20}}, rotation = 0)));
- Boards.customBoard customBoard1 annotation(
+ Boards.customBoard customBoard1(BoardName = "Arduino UNO", Port = "/dev/ttyACM0") annotation(
Placement(visible = true, transformation(origin = {61, -21}, extent = {{-21, -21}, {21, 21}}, rotation = 0)));
equation
connect(digitalOutput1.pinConnector, customBoard1.boardConnector) annotation(
diff --git a/OpenModelicaArduino/Firmware/pidmata3.ino b/OpenModelicaArduino/Firmware/pidmata3.ino
new file mode 100644
index 0000000..01a4710
--- /dev/null
+++ b/OpenModelicaArduino/Firmware/pidmata3.ino
@@ -0,0 +1,904 @@
+/*
+ Firmata is a generic protocol for communicating with microcontrollers
+ from software on a host computer. It is intended to work with
+ any host computer software package.
+
+ To download a host software package, please click on the following link
+ to open the list of Firmata client libraries in your default browser.
+
+ https://github.com/firmata/arduino#firmata-client-libraries
+
+ Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved.
+ Copyright (C) 2010-2011 Paul Stoffregen. All rights reserved.
+ Copyright (C) 2009 Shigeru Kobayashi. All rights reserved.
+ Copyright (C) 2009-2016 Jeff Hoefs. All rights reserved.
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ See file LICENSE.txt for further informations on licensing terms.
+
+ Last updated August 17th, 2017
+*/
+
+#include <Servo.h>
+#include <Wire.h>
+#include <Firmata.h>
+#include <AutoPID.h>
+
+//Comment the line below, "#define PID", if you are not using PID else uncomment it and follow further instructions.
+#define PID
+
+//------------PID values----------------
+// Pin 6 - setPoint (input value)
+// Pin 5 - feedback (input value)
+// Pin 15 - control (output value)
+
+//If you use real analog pin for input for PID just uncomment next line with #define REAL_INPUT, if use virtual sources comment this line
+//If you use both real will be prefered
+//#define REAL_INPUT
+// This line define analog pin for read values from real sources
+#define AREAD_PIN A1
+
+
+#define PID_OUTPUT_MIN -512.0
+#define PID_OUTPUT_MAX 512.0
+#define PID_KP 15
+#define PID_KI 10
+#define PID_KD 10
+#define PID_BANG_BANG 40
+#define PID_INTERVAL 100
+
+
+
+
+#define I2C_WRITE B00000000
+#define I2C_READ B00001000
+#define I2C_READ_CONTINUOUSLY B00010000
+#define I2C_STOP_READING B00011000
+#define I2C_READ_WRITE_MODE_MASK B00011000
+#define I2C_10BIT_ADDRESS_MODE_MASK B00100000
+#define I2C_END_TX_MASK B01000000
+#define I2C_STOP_TX 1
+#define I2C_RESTART_TX 0
+#define I2C_MAX_QUERIES 8
+#define I2C_REGISTER_NOT_SPECIFIED -1
+
+// the minimum interval for sampling analog input
+#define MINIMUM_SAMPLING_INTERVAL 1
+
+
+/*==============================================================================
+ * GLOBAL VARIABLES
+ *============================================================================*/
+
+#ifdef FIRMATA_SERIAL_FEATURE
+SerialFirmata serialFeature;
+#endif
+
+/* analog inputs */
+int analogInputsToReport = 0; // bitwise array to store pin reporting
+
+/* digital input ports */
+byte reportPINs[TOTAL_PORTS]; // 1 = report this port, 0 = silence
+byte previousPINs[TOTAL_PORTS]; // previous 8 bits sent
+
+/* pins configuration */
+byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else
+
+/* timer variables */
+unsigned long currentMillis; // store the current value from millis()
+unsigned long previousMillis; // for comparison with currentMillis
+unsigned int samplingInterval = 19; // how often to run the main loop (in ms)
+
+/* i2c data */
+struct i2c_device_info {
+ byte addr;
+ int reg;
+ byte bytes;
+ byte stopTX;
+};
+
+
+double currentPoint=0.0, setPoint=0.0, control_value=0.0;
+
+#ifdef PID
+ AutoPID myPID(¤tPoint, &setPoint, &control_value, PID_OUTPUT_MIN, PID_OUTPUT_MAX, PID_KP, PID_KI, PID_KD);
+#endif
+
+
+/* for i2c read continuous more */
+i2c_device_info query[I2C_MAX_QUERIES];
+
+byte i2cRxData[64];
+boolean isI2CEnabled = false;
+signed char queryIndex = -1;
+// default delay time between i2c read request and Wire.requestFrom()
+unsigned int i2cReadDelayTime = 0;
+
+Servo servos[MAX_SERVOS];
+byte servoPinMap[TOTAL_PINS];
+byte detachedServos[MAX_SERVOS];
+byte detachedServoCount = 0;
+byte servoCount = 0;
+
+boolean isResetting = false;
+
+// Forward declare a few functions to avoid compiler errors with older versions
+// of the Arduino IDE.
+void setPinModeCallback(byte, int);
+void reportAnalogCallback(byte analogPin, int value);
+void sysexCallback(byte, byte, byte*);
+
+/* utility functions */
+void wireWrite(byte data)
+{
+#if ARDUINO >= 100
+ Wire.write((byte)data);
+#else
+ Wire.send(data);
+#endif
+}
+
+byte wireRead(void)
+{
+#if ARDUINO >= 100
+ return Wire.read();
+#else
+ return Wire.receive();
+#endif
+}
+
+ /*==============================================================================
+ * PID
+ *==============================================================================*/
+
+void update_setPoint(int value)
+{
+
+ #ifdef REAL_INPUT
+ setPoint=(double)analogRead(AREAD_PIN);
+ #else
+ setPoint=(double)(value-512);
+ #endif
+ }
+
+void update_currentPoint(int value)
+{
+ currentPoint=(double)(value-512);
+}
+
+/*==============================================================================
+ * FUNCTIONS
+ *============================================================================*/
+
+void attachServo(byte pin, int minPulse, int maxPulse)
+{
+ if (servoCount < MAX_SERVOS) {
+ // reuse indexes of detached servos until all have been reallocated
+ if (detachedServoCount > 0) {
+ servoPinMap[pin] = detachedServos[detachedServoCount - 1];
+ if (detachedServoCount > 0) detachedServoCount--;
+ } else {
+ servoPinMap[pin] = servoCount;
+ servoCount++;
+ }
+ if (minPulse > 0 && maxPulse > 0) {
+ servos[servoPinMap[pin]].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse);
+ } else {
+ servos[servoPinMap[pin]].attach(PIN_TO_DIGITAL(pin));
+ }
+ } else {
+ Firmata.sendString("Max servos attached");
+ }
+}
+
+void detachServo(byte pin)
+{
+ servos[servoPinMap[pin]].detach();
+ // if we're detaching the last servo, decrement the count
+ // otherwise store the index of the detached servo
+ if (servoPinMap[pin] == servoCount && servoCount > 0) {
+ servoCount--;
+ } else if (servoCount > 0) {
+ // keep track of detached servos because we want to reuse their indexes
+ // before incrementing the count of attached servos
+ detachedServoCount++;
+ detachedServos[detachedServoCount - 1] = servoPinMap[pin];
+ }
+
+ servoPinMap[pin] = 255;
+}
+
+void enableI2CPins()
+{
+ byte i;
+ // is there a faster way to do this? would probaby require importing
+ // Arduino.h to get SCL and SDA pins
+ for (i = 0; i < TOTAL_PINS; i++) {
+ if (IS_PIN_I2C(i)) {
+ // mark pins as i2c so they are ignore in non i2c data requests
+ setPinModeCallback(i, PIN_MODE_I2C);
+ }
+ }
+
+ isI2CEnabled = true;
+
+ Wire.begin();
+}
+
+/* disable the i2c pins so they can be used for other functions */
+void disableI2CPins() {
+ isI2CEnabled = false;
+ // disable read continuous mode for all devices
+ queryIndex = -1;
+}
+
+void readAndReportData(byte address, int theRegister, byte numBytes, byte stopTX) {
+ // allow I2C requests that don't require a register read
+ // for example, some devices using an interrupt pin to signify new data available
+ // do not always require the register read so upon interrupt you call Wire.requestFrom()
+ if (theRegister != I2C_REGISTER_NOT_SPECIFIED) {
+ Wire.beginTransmission(address);
+ wireWrite((byte)theRegister);
+ Wire.endTransmission(stopTX); // default = true
+ // do not set a value of 0
+ if (i2cReadDelayTime > 0) {
+ // delay is necessary for some devices such as WiiNunchuck
+ delayMicroseconds(i2cReadDelayTime);
+ }
+ } else {
+ theRegister = 0; // fill the register with a dummy value
+ }
+
+ Wire.requestFrom(address, numBytes); // all bytes are returned in requestFrom
+
+ // check to be sure correct number of bytes were returned by slave
+ if (numBytes < Wire.available()) {
+ Firmata.sendString("I2C: Too many bytes received");
+ } else if (numBytes > Wire.available()) {
+ Firmata.sendString("I2C: Too few bytes received");
+ }
+
+ i2cRxData[0] = address;
+ i2cRxData[1] = theRegister;
+
+ for (int i = 0; i < numBytes && Wire.available(); i++) {
+ i2cRxData[2 + i] = wireRead();
+ }
+
+ // send slave address, register and received bytes
+ Firmata.sendSysex(SYSEX_I2C_REPLY, numBytes + 2, i2cRxData);
+}
+
+void outputPort(byte portNumber, byte portValue, byte forceSend)
+{
+ // pins not configured as INPUT are cleared to zeros
+ portValue = portValue & portConfigInputs[portNumber];
+ // only send if the value is different than previously sent
+ if (forceSend || previousPINs[portNumber] != portValue) {
+ Firmata.sendDigitalPort(portNumber, portValue);
+ previousPINs[portNumber] = portValue;
+ }
+}
+
+/* -----------------------------------------------------------------------------
+ * check all the active digital inputs for change of state, then add any events
+ * to the Serial output queue using Serial.print() */
+void checkDigitalInputs(void)
+{
+ /* Using non-looping code allows constants to be given to readPort().
+ * The compiler will apply substantial optimizations if the inputs
+ * to readPort() are compile-time constants. */
+ if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false);
+ if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false);
+ if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false);
+ if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false);
+ if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false);
+ if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false);
+ if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false);
+ if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false);
+ if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false);
+ if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false);
+ if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false);
+ if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false);
+ if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false);
+ if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false);
+ if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false);
+ if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false);
+}
+
+// -----------------------------------------------------------------------------
+/* sets the pin mode to the correct state and sets the relevant bits in the
+ * two bit-arrays that track Digital I/O and PWM status
+ */
+void setPinModeCallback(byte pin, int mode)
+{
+ if (Firmata.getPinMode(pin) == PIN_MODE_IGNORE)
+ return;
+
+ if (Firmata.getPinMode(pin) == PIN_MODE_I2C && isI2CEnabled && mode != PIN_MODE_I2C) {
+ // disable i2c so pins can be used for other functions
+ // the following if statements should reconfigure the pins properly
+ disableI2CPins();
+ }
+ if (IS_PIN_DIGITAL(pin) && mode != PIN_MODE_SERVO) {
+ if (servoPinMap[pin] < MAX_SERVOS && servos[servoPinMap[pin]].attached()) {
+ detachServo(pin);
+ }
+ }
+ if (IS_PIN_ANALOG(pin)) {
+ reportAnalogCallback(PIN_TO_ANALOG(pin), mode == PIN_MODE_ANALOG ? 1 : 0); // turn on/off reporting
+ }
+ if (IS_PIN_DIGITAL(pin)) {
+ if (mode == INPUT || mode == PIN_MODE_PULLUP) {
+ portConfigInputs[pin / 8] |= (1 << (pin & 7));
+ } else {
+ portConfigInputs[pin / 8] &= ~(1 << (pin & 7));
+ }
+ }
+ Firmata.setPinState(pin, 0);
+ switch (mode) {
+ case PIN_MODE_ANALOG:
+ if (IS_PIN_ANALOG(pin)) {
+ if (IS_PIN_DIGITAL(pin)) {
+ pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver
+#if ARDUINO <= 100
+ // deprecated since Arduino 1.0.1 - TODO: drop support in Firmata 2.6
+ digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups
+#endif
+ }
+ Firmata.setPinMode(pin, PIN_MODE_ANALOG);
+ }
+ break;
+ case INPUT:
+ if (IS_PIN_DIGITAL(pin)) {
+ pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver
+#if ARDUINO <= 100
+ // deprecated since Arduino 1.0.1 - TODO: drop support in Firmata 2.6
+ digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups
+#endif
+ Firmata.setPinMode(pin, INPUT);
+ }
+ break;
+ case PIN_MODE_PULLUP:
+ if (IS_PIN_DIGITAL(pin)) {
+ pinMode(PIN_TO_DIGITAL(pin), INPUT_PULLUP);
+ Firmata.setPinMode(pin, PIN_MODE_PULLUP);
+ Firmata.setPinState(pin, 1);
+ }
+ break;
+ case OUTPUT:
+ if (IS_PIN_DIGITAL(pin)) {
+ if (Firmata.getPinMode(pin) == PIN_MODE_PWM) {
+ // Disable PWM if pin mode was previously set to PWM.
+ digitalWrite(PIN_TO_DIGITAL(pin), LOW);
+ }
+ pinMode(PIN_TO_DIGITAL(pin), OUTPUT);
+ Firmata.setPinMode(pin, OUTPUT);
+ }
+ break;
+ case PIN_MODE_PWM:
+ if (IS_PIN_PWM(pin)) {
+ pinMode(PIN_TO_PWM(pin), OUTPUT);
+ analogWrite(PIN_TO_PWM(pin), 0);
+ Firmata.setPinMode(pin, PIN_MODE_PWM);
+ }
+ break;
+ case PIN_MODE_SERVO:
+ if (IS_PIN_DIGITAL(pin)) {
+ Firmata.setPinMode(pin, PIN_MODE_SERVO);
+ if (servoPinMap[pin] == 255 || !servos[servoPinMap[pin]].attached()) {
+ // pass -1 for min and max pulse values to use default values set
+ // by Servo library
+ attachServo(pin, -1, -1);
+ }
+ }
+ break;
+ case PIN_MODE_I2C:
+ if (IS_PIN_I2C(pin)) {
+ // mark the pin as i2c
+ // the user must call I2C_CONFIG to enable I2C for a device
+ Firmata.setPinMode(pin, PIN_MODE_I2C);
+ }
+ break;
+ case PIN_MODE_SERIAL:
+#ifdef FIRMATA_SERIAL_FEATURE
+ serialFeature.handlePinMode(pin, PIN_MODE_SERIAL);
+#endif
+ break;
+ default:
+ Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM
+ }
+ // TODO: save status to EEPROM here, if changed
+}
+
+/*
+ * Sets the value of an individual pin. Useful if you want to set a pin value but
+ * are not tracking the digital port state.
+ * Can only be used on pins configured as OUTPUT.
+ * Cannot be used to enable pull-ups on Digital INPUT pins.
+ */
+void setPinValueCallback(byte pin, int value)
+{
+ if (pin < TOTAL_PINS && IS_PIN_DIGITAL(pin)) {
+ if (Firmata.getPinMode(pin) == OUTPUT) {
+ Firmata.setPinState(pin, value);
+ digitalWrite(PIN_TO_DIGITAL(pin), value);
+ }
+ }
+}
+
+void analogWriteCallback(byte pin, int value)
+{
+ if (pin < TOTAL_PINS) {
+ switch (Firmata.getPinMode(pin)) {
+ case PIN_MODE_SERVO:
+ if (IS_PIN_DIGITAL(pin))
+ servos[servoPinMap[pin]].write(value);
+ Firmata.setPinState(pin, value);
+ break;
+ case PIN_MODE_PWM:
+ if (IS_PIN_PWM(pin))
+ //analogWrite(PIN_TO_PWM(pin), value);
+ switch(pin)
+ {
+ case 5:
+ update_currentPoint(value);
+ break;
+ case 6:
+ update_setPoint(value);
+ }
+
+ Firmata.setPinState(pin, value);
+ break;
+ }
+ }
+}
+
+void digitalWriteCallback(byte port, int value)
+{
+ byte pin, lastPin, pinValue, mask = 1, pinWriteMask = 0;
+
+ if (port < TOTAL_PORTS) {
+ // create a mask of the pins on this port that are writable.
+ lastPin = port * 8 + 8;
+ if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS;
+ for (pin = port * 8; pin < lastPin; pin++) {
+ // do not disturb non-digital pins (eg, Rx & Tx)
+ if (IS_PIN_DIGITAL(pin)) {
+ // do not touch pins in PWM, ANALOG, SERVO or other modes
+ if (Firmata.getPinMode(pin) == OUTPUT || Firmata.getPinMode(pin) == INPUT) {
+ pinValue = ((byte)value & mask) ? 1 : 0;
+ if (Firmata.getPinMode(pin) == OUTPUT) {
+ pinWriteMask |= mask;
+ } else if (Firmata.getPinMode(pin) == INPUT && pinValue == 1 && Firmata.getPinState(pin) != 1) {
+ // only handle INPUT here for backwards compatibility
+#if ARDUINO > 100
+ pinMode(pin, INPUT_PULLUP);
+#else
+ // only write to the INPUT pin to enable pullups if Arduino v1.0.0 or earlier
+ pinWriteMask |= mask;
+#endif
+ }
+ Firmata.setPinState(pin, pinValue);
+ }
+ }
+ mask = mask << 1;
+ }
+ writePort(port, (byte)value, pinWriteMask);
+ }
+}
+
+
+// -----------------------------------------------------------------------------
+/* sets bits in a bit array (int) to toggle the reporting of the analogIns
+ */
+//void FirmataClass::setAnalogPinReporting(byte pin, byte state) {
+//}
+void reportAnalogCallback(byte analogPin, int value)
+{
+ if (analogPin < TOTAL_ANALOG_PINS) {
+ if (value == 0) {
+ analogInputsToReport = analogInputsToReport & ~ (1 << analogPin);
+ } else {
+ analogInputsToReport = analogInputsToReport | (1 << analogPin);
+ // prevent during system reset or all analog pin values will be reported
+ // which may report noise for unconnected analog pins
+ if (!isResetting) {
+ // Send pin value immediately. This is helpful when connected via
+ // ethernet, wi-fi or bluetooth so pin states can be known upon
+ // reconnecting.
+ Firmata.sendAnalog(analogPin, analogRead(analogPin));
+ }
+ }
+ }
+ // TODO: save status to EEPROM here, if changed
+}
+
+void reportDigitalCallback(byte port, int value)
+{
+ if (port < TOTAL_PORTS) {
+ reportPINs[port] = (byte)value;
+ // Send port value immediately. This is helpful when connected via
+ // ethernet, wi-fi or bluetooth so pin states can be known upon
+ // reconnecting.
+ if (value) outputPort(port, readPort(port, portConfigInputs[port]), true);
+ }
+ // do not disable analog reporting on these 8 pins, to allow some
+ // pins used for digital, others analog. Instead, allow both types
+ // of reporting to be enabled, but check if the pin is configured
+ // as analog when sampling the analog inputs. Likewise, while
+ // scanning digital pins, portConfigInputs will mask off values from any
+ // pins configured as analog
+}
+
+/*==============================================================================
+ * SYSEX-BASED commands
+ *============================================================================*/
+
+void sysexCallback(byte command, byte argc, byte *argv)
+{
+ byte mode;
+ byte stopTX;
+ byte slaveAddress;
+ byte data;
+ int slaveRegister;
+ unsigned int delayTime;
+
+ switch (command) {
+ case I2C_REQUEST:
+ mode = argv[1] & I2C_READ_WRITE_MODE_MASK;
+ if (argv[1] & I2C_10BIT_ADDRESS_MODE_MASK) {
+ Firmata.sendString("10-bit addressing not supported");
+ return;
+ }
+ else {
+ slaveAddress = argv[0];
+ }
+
+ // need to invert the logic here since 0 will be default for client
+ // libraries that have not updated to add support for restart tx
+ if (argv[1] & I2C_END_TX_MASK) {
+ stopTX = I2C_RESTART_TX;
+ }
+ else {
+ stopTX = I2C_STOP_TX; // default
+ }
+
+ switch (mode) {
+ case I2C_WRITE:
+ Wire.beginTransmission(slaveAddress);
+ for (byte i = 2; i < argc; i += 2) {
+ data = argv[i] + (argv[i + 1] << 7);
+ wireWrite(data);
+ }
+ Wire.endTransmission();
+ delayMicroseconds(70);
+ break;
+ case I2C_READ:
+ if (argc == 6) {
+ // a slave register is specified
+ slaveRegister = argv[2] + (argv[3] << 7);
+ data = argv[4] + (argv[5] << 7); // bytes to read
+ }
+ else {
+ // a slave register is NOT specified
+ slaveRegister = I2C_REGISTER_NOT_SPECIFIED;
+ data = argv[2] + (argv[3] << 7); // bytes to read
+ }
+ readAndReportData(slaveAddress, (int)slaveRegister, data, stopTX);
+ break;
+ case I2C_READ_CONTINUOUSLY:
+ if ((queryIndex + 1) >= I2C_MAX_QUERIES) {
+ // too many queries, just ignore
+ Firmata.sendString("too many queries");
+ break;
+ }
+ if (argc == 6) {
+ // a slave register is specified
+ slaveRegister = argv[2] + (argv[3] << 7);
+ data = argv[4] + (argv[5] << 7); // bytes to read
+ }
+ else {
+ // a slave register is NOT specified
+ slaveRegister = (int)I2C_REGISTER_NOT_SPECIFIED;
+ data = argv[2] + (argv[3] << 7); // bytes to read
+ }
+ queryIndex++;
+ query[queryIndex].addr = slaveAddress;
+ query[queryIndex].reg = slaveRegister;
+ query[queryIndex].bytes = data;
+ query[queryIndex].stopTX = stopTX;
+ break;
+ case I2C_STOP_READING:
+ byte queryIndexToSkip;
+ // if read continuous mode is enabled for only 1 i2c device, disable
+ // read continuous reporting for that device
+ if (queryIndex <= 0) {
+ queryIndex = -1;
+ } else {
+ queryIndexToSkip = 0;
+ // if read continuous mode is enabled for multiple devices,
+ // determine which device to stop reading and remove it's data from
+ // the array, shifiting other array data to fill the space
+ for (byte i = 0; i < queryIndex + 1; i++) {
+ if (query[i].addr == slaveAddress) {
+ queryIndexToSkip = i;
+ break;
+ }
+ }
+
+ for (byte i = queryIndexToSkip; i < queryIndex + 1; i++) {
+ if (i < I2C_MAX_QUERIES) {
+ query[i].addr = query[i + 1].addr;
+ query[i].reg = query[i + 1].reg;
+ query[i].bytes = query[i + 1].bytes;
+ query[i].stopTX = query[i + 1].stopTX;
+ }
+ }
+ queryIndex--;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ case I2C_CONFIG:
+ delayTime = (argv[0] + (argv[1] << 7));
+
+ if (argc > 1 && delayTime > 0) {
+ i2cReadDelayTime = delayTime;
+ }
+
+ if (!isI2CEnabled) {
+ enableI2CPins();
+ }
+
+ break;
+ case SERVO_CONFIG:
+ if (argc > 4) {
+ // these vars are here for clarity, they'll optimized away by the compiler
+ byte pin = argv[0];
+ int minPulse = argv[1] + (argv[2] << 7);
+ int maxPulse = argv[3] + (argv[4] << 7);
+
+ if (IS_PIN_DIGITAL(pin)) {
+ if (servoPinMap[pin] < MAX_SERVOS && servos[servoPinMap[pin]].attached()) {
+ detachServo(pin);
+ }
+ attachServo(pin, minPulse, maxPulse);
+ setPinModeCallback(pin, PIN_MODE_SERVO);
+ }
+ }
+ break;
+ case SAMPLING_INTERVAL:
+ if (argc > 1) {
+ samplingInterval = argv[0] + (argv[1] << 7);
+ if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) {
+ samplingInterval = MINIMUM_SAMPLING_INTERVAL;
+ }
+ } else {
+ //Firmata.sendString("Not enough data");
+ }
+ break;
+ case EXTENDED_ANALOG:
+ if (argc > 1) {
+ int val = argv[1];
+ if (argc > 2) val |= (argv[2] << 7);
+ if (argc > 3) val |= (argv[3] << 14);
+ analogWriteCallback(argv[0], val);
+ }
+ break;
+ case CAPABILITY_QUERY:
+ Firmata.write(START_SYSEX);
+ Firmata.write(CAPABILITY_RESPONSE);
+ for (byte pin = 0; pin < TOTAL_PINS; pin++) {
+ if (IS_PIN_DIGITAL(pin)) {
+ Firmata.write((byte)INPUT);
+ Firmata.write(1);
+ Firmata.write((byte)PIN_MODE_PULLUP);
+ Firmata.write(1);
+ Firmata.write((byte)OUTPUT);
+ Firmata.write(1);
+ }
+ if (IS_PIN_ANALOG(pin)) {
+ Firmata.write(PIN_MODE_ANALOG);
+ Firmata.write(10); // 10 = 10-bit resolution
+ }
+ if (IS_PIN_PWM(pin)) {
+ Firmata.write(PIN_MODE_PWM);
+ Firmata.write(DEFAULT_PWM_RESOLUTION);
+ }
+ if (IS_PIN_DIGITAL(pin)) {
+ Firmata.write(PIN_MODE_SERVO);
+ Firmata.write(14);
+ }
+ if (IS_PIN_I2C(pin)) {
+ Firmata.write(PIN_MODE_I2C);
+ Firmata.write(1); // TODO: could assign a number to map to SCL or SDA
+ }
+#ifdef FIRMATA_SERIAL_FEATURE
+ serialFeature.handleCapability(pin);
+#endif
+ Firmata.write(127);
+ }
+ Firmata.write(END_SYSEX);
+ break;
+ case PIN_STATE_QUERY:
+ if (argc > 0) {
+ byte pin = argv[0];
+ Firmata.write(START_SYSEX);
+ Firmata.write(PIN_STATE_RESPONSE);
+ Firmata.write(pin);
+ if (pin < TOTAL_PINS) {
+ Firmata.write(Firmata.getPinMode(pin));
+ Firmata.write((byte)Firmata.getPinState(pin) & 0x7F);
+ if (Firmata.getPinState(pin) & 0xFF80) Firmata.write((byte)(Firmata.getPinState(pin) >> 7) & 0x7F);
+ if (Firmata.getPinState(pin) & 0xC000) Firmata.write((byte)(Firmata.getPinState(pin) >> 14) & 0x7F);
+ }
+ Firmata.write(END_SYSEX);
+ }
+ break;
+ case ANALOG_MAPPING_QUERY:
+ Firmata.write(START_SYSEX);
+ Firmata.write(ANALOG_MAPPING_RESPONSE);
+ for (byte pin = 0; pin < TOTAL_PINS; pin++) {
+ Firmata.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127);
+ }
+ Firmata.write(END_SYSEX);
+ break;
+
+ case SERIAL_MESSAGE:
+#ifdef FIRMATA_SERIAL_FEATURE
+ serialFeature.handleSysex(command, argc, argv);
+#endif
+ break;
+ }
+}
+
+/*==============================================================================
+ * SETUP()
+ *============================================================================*/
+
+void systemResetCallback()
+{
+ isResetting = true;
+
+ // initialize a defalt state
+ // TODO: option to load config from EEPROM instead of default
+
+#ifdef FIRMATA_SERIAL_FEATURE
+ serialFeature.reset();
+#endif
+
+ if (isI2CEnabled) {
+ disableI2CPins();
+ }
+
+ for (byte i = 0; i < TOTAL_PORTS; i++) {
+ reportPINs[i] = false; // by default, reporting off
+ portConfigInputs[i] = 0; // until activated
+ previousPINs[i] = 0;
+ }
+
+ for (byte i = 0; i < TOTAL_PINS; i++) {
+ // pins with analog capability default to analog input
+ // otherwise, pins default to digital output
+ if (IS_PIN_ANALOG(i)) {
+ // turns off pullup, configures everything
+ setPinModeCallback(i, PIN_MODE_ANALOG);
+ } else if (IS_PIN_DIGITAL(i)) {
+ // sets the output to 0, configures portConfigInputs
+ setPinModeCallback(i, OUTPUT);
+ }
+
+ servoPinMap[i] = 255;
+ }
+ // by default, do not report any analog inputs
+ analogInputsToReport = 0;
+
+ detachedServoCount = 0;
+ servoCount = 0;
+
+ /* send digital inputs to set the initial state on the host computer,
+ * since once in the loop(), this firmware will only send on change */
+ /*
+ TODO: this can never execute, since no pins default to digital input
+ but it will be needed when/if we support EEPROM stored config
+ for (byte i=0; i < TOTAL_PORTS; i++) {
+ outputPort(i, readPort(i, portConfigInputs[i]), true);
+ }
+ */
+ isResetting = false;
+}
+
+void setup()
+{
+ Firmata.setFirmwareVersion(FIRMATA_FIRMWARE_MAJOR_VERSION, FIRMATA_FIRMWARE_MINOR_VERSION);
+
+ Firmata.attach(ANALOG_MESSAGE, analogWriteCallback);
+ Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback);
+ Firmata.attach(REPORT_ANALOG, reportAnalogCallback);
+ Firmata.attach(REPORT_DIGITAL, reportDigitalCallback);
+ Firmata.attach(SET_PIN_MODE, setPinModeCallback);
+ Firmata.attach(SET_DIGITAL_PIN_VALUE, setPinValueCallback);
+ Firmata.attach(START_SYSEX, sysexCallback);
+ Firmata.attach(SYSTEM_RESET, systemResetCallback);
+
+ // to use a port other than Serial, such as Serial1 on an Arduino Leonardo or Mega,
+ // Call begin(baud) on the alternate serial port and pass it to Firmata to begin like this:
+ // Serial1.begin(57600);
+ // Firmata.begin(Serial1);
+ // However do not do this if you are using SERIAL_MESSAGE
+
+ Firmata.begin(57600);
+ while (!Serial) {
+ ; // wait for serial port to connect. Needed for ATmega32u4-based boards and Arduino 101
+ }
+
+ systemResetCallback(); // reset to default config
+
+ #ifdef PID
+ //if temperature is more than 4 below or above setpoint, OUTPUT will be set to min or max respectively
+ myPID.setBangBang(PID_BANG_BANG);
+ //set PID update interval to
+ myPID.setTimeStep(PID_INTERVAL);
+ #endif
+}
+
+/*==============================================================================
+ * LOOP()
+ *============================================================================*/
+void loop()
+{
+ byte pin, analogPin;
+
+ /* DIGITALREAD - as fast as possible, check for changes and output them to the
+ * FTDI buffer using Serial.print() */
+ checkDigitalInputs();
+
+ /* STREAMREAD - processing incoming messagse as soon as possible, while still
+ * checking digital inputs. */
+ while (Firmata.available())
+ Firmata.processInput();
+
+ #ifdef PID
+ #ifdef REAL_INPUT
+ update_setPoint(1);
+ #endif
+ myPID.run(); //call every loop, updates automatically at certain time interval
+ #endif
+
+ // TODO - ensure that Stream buffer doesn't go over 60 bytes
+
+ currentMillis = millis();
+ if (currentMillis - previousMillis > samplingInterval) {
+ previousMillis += samplingInterval;
+ /* ANALOGREAD - do all analogReads() at the configured sampling interval */
+ for (pin = 0; pin < TOTAL_PINS; pin++) {
+ if (IS_PIN_ANALOG(pin) && Firmata.getPinMode(pin) == PIN_MODE_ANALOG) {
+ analogPin = PIN_TO_ANALOG(pin);
+ if (analogInputsToReport & (1 << analogPin)) {
+ #ifdef PID
+ Firmata.sendAnalog(analogPin, (int)(control_value+512.0));
+ #else
+ Firmata.sendAnalog(analogPin, analogRead(analogPin));
+ #endif
+ }
+ }
+ }
+ // report i2c data for all device with read continuous mode enabled
+ if (queryIndex > -1) {
+ for (byte i = 0; i < queryIndex + 1; i++) {
+ readAndReportData(query[i].addr, query[i].reg, query[i].bytes, query[i].stopTX);
+ }
+ }
+ }
+
+#ifdef FIRMATA_SERIAL_FEATURE
+ serialFeature.update();
+#endif
+}
diff --git a/OpenModelicaArduino/Resources/Library/linux64/libmodelPlugFirmata.so b/OpenModelicaArduino/Resources/Library/linux64/libmodelPlugFirmata.so
old mode 100644
new mode 100755
index f4cd733..241635b
Binary files a/OpenModelicaArduino/Resources/Library/linux64/libmodelPlugFirmata.so and b/OpenModelicaArduino/Resources/Library/linux64/libmodelPlugFirmata.so differ
diff --git a/OpenModelicaArduino/package.mo b/OpenModelicaArduino/package.mo
index de10e5b..4758871 100644
--- a/OpenModelicaArduino/package.mo
+++ b/OpenModelicaArduino/package.mo
@@ -334,6 +334,8 @@ end BlinkLed;
+
+
model DimmingLed "Changing the intensity of an LED"
extends Modelica.Icons.Example;
@@ -555,6 +557,72 @@ end BlinkLed;
annotation(
uses(OpenModelicaArduino(version = "1.2"), Modelica(version = "3.2.2"), Modelica_DeviceDrivers(version = "1.5.0")));
end DCMotorWithPWM;
+
+
+
+
+
+
+ model DCMotorWithPID
+ extends Modelica.Icons.Example;
+ Modelica_DeviceDrivers.Blocks.OperatingSystem.SynchronizeRealtime synchronizeRealtime1(priority = "High", setPriority = true) annotation(
+ Placement(visible = true, transformation(origin = {92, 88}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ Modelica.Mechanics.Rotational.Components.Inertia inertia1(J = 1, a(start = 0), phi(start = 0), w(start = 0)) annotation(
+ Placement(visible = true, transformation(origin = {-22, -86}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ Modelica.Mechanics.Rotational.Components.Inertia inertia2(J = 1, a(start = 0), phi(start = 0), w(start = 0)) annotation(
+ Placement(visible = true, transformation(origin = {56, -86}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ Modelica.Mechanics.Rotational.Components.SpringDamper springDamper1(c = 20, d = 10, phi_rel0 = 0) annotation(
+ Placement(visible = true, transformation(origin = {16, -86}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ Modelica.Mechanics.Rotational.Sources.Torque torque1 annotation(
+ Placement(visible = true, transformation(origin = {-64, -86}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ Modelica.Mechanics.Rotational.Sources.ConstantTorque constantTorque1(tau_constant = 10) annotation(
+ Placement(visible = true, transformation(origin = {98, -86}, extent = {{10, -10}, {-10, 10}}, rotation = 0)));
+ Modelica.Mechanics.Rotational.Sensors.SpeedSensor speedSensor1 annotation(
+ Placement(visible = true, transformation(origin = {88, -36}, extent = {{-10, -10}, {10, 10}}, rotation = 90)));
+ OpenModelicaArduino.Boards.CustomFirmata customFirmata1(BaudRate = 57600, Port = "/dev/ttyACM0", ShowPinCapabilities = true, UpdatePeriod = 0.02, UseDTR = true) annotation(
+ Placement(visible = true, transformation(origin = {-10, 4}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ OpenModelicaArduino.Pins.AnalogOutput analogOutput1(MaxValue = 512, MinValue = -512, Pin = 5) annotation(
+ Placement(visible = true, transformation(origin = {46, 2}, extent = {{10, -10}, {-10, 10}}, rotation = 0)));
+ OpenModelicaArduino.Pins.AnalogInput analogInput1(InitValue = 0, MaxValue = 512, MinValue = -512, Pin = 15) annotation(
+ Placement(visible = true, transformation(origin = {-64, 2}, extent = {{10, -10}, {-10, 10}}, rotation = 0)));
+ OpenModelicaArduino.Pins.AnalogOutput analogOutput2(MaxValue = 512, MinValue = -512, Pin = 6) annotation(
+ Placement(visible = true, transformation(origin = {-54, 58}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ Modelica.Blocks.Sources.Sine sine1(amplitude = 512, freqHz = 0.5) annotation(
+ Placement(visible = true, transformation(origin = {-122, 58}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
+ equation
+ connect(sine1.y, analogOutput2.u) annotation(
+ Line(points = {{-110, 58}, {-64, 58}, {-64, 58}, {-64, 58}}, color = {0, 0, 127}));
+ connect(analogOutput2.pinConnector, customFirmata1.boardConnector) annotation(
+ Line(points = {{-44, 58}, {-10, 58}, {-10, 4}}));
+ connect(analogInput1.y, torque1.tau) annotation(
+ Line(points = {{-74, 2}, {-84, 2}, {-84, 2}, {-94, 2}, {-94, -86}, {-76, -86}}, color = {0, 0, 127}));
+ connect(analogInput1.pinConnector, customFirmata1.boardConnector) annotation(
+ Line(points = {{-54, 2}, {-10, 2}, {-10, 4}}));
+ connect(speedSensor1.w, analogOutput1.u) annotation(
+ Line(points = {{88, -25}, {89, -25}, {89, -23}, {88, -23}, {88, 3}, {56, 3}, {56, 1}}, color = {0, 0, 127}));
+ connect(analogOutput1.pinConnector, customFirmata1.boardConnector) annotation(
+ Line(points = {{36, 2}, {35.5, 2}, {35.5, 2}, {35, 2}, {35, 4}, {-10, 4}}));
+ connect(speedSensor1.flange, constantTorque1.flange) annotation(
+ Line(points = {{88, -46}, {88, -86}}));
+ connect(inertia2.flange_b, constantTorque1.flange) annotation(
+ Line(points = {{66, -86}, {88, -86}, {88, -86}, {88, -86}, {88, -86}, {88, -86}}));
+ connect(torque1.flange, inertia1.flange_a) annotation(
+ Line(points = {{-54, -86}, {-37, -86}, {-37, -86}, {-32, -86}, {-32, -86}, {-31, -86}, {-31, -86}, {-32, -86}}));
+ connect(springDamper1.flange_b, inertia2.flange_a) annotation(
+ Line(points = {{26, -86}, {36, -86}, {36, -86}, {46, -86}, {46, -86}, {46, -86}}));
+ connect(inertia1.flange_b, springDamper1.flange_a) annotation(
+ Line(points = {{-12, -86}, {-3, -86}, {-3, -86}, {6, -86}, {6, -86}, {6, -86}}));
+ annotation(
+ uses(OpenModelicaArduino(version = "1.2"), Modelica(version = "3.2.2"), Modelica_DeviceDrivers(version = "1.5.0")));
+ end DCMotorWithPID;
+
+
+
+
+
+
+
+
annotation(Diagram(coordinateSystem(extent = {{-148.5, -105}, {148.5, 105}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5})));
end Examples;
@@ -780,4 +848,4 @@ end BlinkLed;
<p> </p>
<p> </p></html>", revisions = ""), version = "1.2", Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5}), graphics = {Rectangle(visible = true, fillColor = {190, 53, 19}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, extent = {{-100, -100}, {100, 100}}, radius = 25), Polygon(visible = true, origin = {-17.857, -4.643}, fillColor = {128, 128, 128}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, points = {{42.857, 59.643}, {42.857, 64.643}, {37.857, 69.643}, {32.857, 69.643}, {-17.143, 69.643}, {-42.143, 54.643}, {-57.143, 34.643}, {-65.22199999999999, 4.643}, {-57.143, -25.357}, {-42.143, -45.357}, {-17.143, -60.357}, {32.857, -60.357}, {37.857, -60.357}, {42.857, -55.357}, {42.857, -50.357}}, smooth = Smooth.Bezier), Polygon(visible = true, origin = {-17.857, -4.643}, fillColor = {255, 255, 255}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, points = {{42.857, 59.643}, {42.857, 64.643}, {37.857, 69.643}, {30.028, 54.643}, {-12.143, 59.643}, {-37.143, 44.643}, {-50.141, 26.339}, {-55.168, 4.643}, {-52.143, -20.357}, {-42.143, -42.453}, {-17.143, -60.357}, {32.857, -60.357}, {37.857, -60.357}, {42.857, -55.357}, {42.857, -50.357}}, smooth = Smooth.Bezier), Rectangle(visible = true, origin = {50, 27.5}, lineColor = {128, 128, 128}, fillColor = {255, 255, 255}, fillPattern = FillPattern.HorizontalCylinder, extent = {{-25, -12.5}, {25, 12.5}}), Rectangle(visible = true, origin = {50, -27.5}, lineColor = {128, 128, 128}, fillColor = {255, 255, 255}, fillPattern = FillPattern.HorizontalCylinder, extent = {{-25, -12.5}, {25, 12.5}}), Polygon(visible = true, origin = {-23.077, -0.385}, fillColor = {191, 191, 191}, pattern = LinePattern.None, fillPattern = FillPattern.Solid, points = {{38.077, 50.385}, {38.077, 55.385}, {33.077, 55.385}, {-6.923, 55.385}, {-26.923, 45.385}, {-41.923, 30.385}, {-50.213, 0.385}, {-41.923, -29.615}, {-26.923, -44.615}, {-6.923, -54.615}, {33.077, -54.615}, {38.077, -54.615}, {38.077, -49.615}}, smooth = Smooth.Bezier), Polygon(visible = true, origin = {-17.857, -4.643}, lineColor = {128, 128, 128}, fillColor = {128, 128, 128}, points = {{42.857, 59.643}, {42.857, 64.643}, {37.857, 69.643}, {32.857, 69.643}, {-17.143, 69.643}, {-42.143, 54.643}, {-57.143, 34.643}, {-65.22199999999999, 4.643}, {-57.143, -25.357}, {-42.143, -45.357}, {-17.143, -60.357}, {32.857, -60.357}, {37.857, -60.357}, {42.857, -55.357}, {42.857, -50.357}}, smooth = Smooth.Bezier)}), Diagram(coordinateSystem(extent = {{-148.5, -105}, {148.5, 105}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5})),
uses(Modelica_DeviceDrivers(version = "1.5.0"), Modelica(version = "3.2.2")));
-end OpenModelicaArduino;
\ No newline at end of file
+end OpenModelicaArduino;
--
cgit