From f6a84e772d0e4dd4da1850ffe8e77428d69a3ef1 Mon Sep 17 00:00:00 2001 From: Pragya28 Date: Mon, 18 Jun 2018 20:34:00 +0530 Subject: Tiva C examples added, package renamed --- OpenModelicaArduino/Firmware/pidmata3/pidmata3.ino | 904 --------------------- 1 file changed, 904 deletions(-) delete mode 100644 OpenModelicaArduino/Firmware/pidmata3/pidmata3.ino (limited to 'OpenModelicaArduino/Firmware/pidmata3/pidmata3.ino') diff --git a/OpenModelicaArduino/Firmware/pidmata3/pidmata3.ino b/OpenModelicaArduino/Firmware/pidmata3/pidmata3.ino deleted file mode 100644 index 01a4710..0000000 --- a/OpenModelicaArduino/Firmware/pidmata3/pidmata3.ino +++ /dev/null @@ -1,904 +0,0 @@ -/* - Firmata is a generic protocol for communicating with microcontrollers - from software on a host computer. It is intended to work with - any host computer software package. - - To download a host software package, please click on the following link - to open the list of Firmata client libraries in your default browser. - - https://github.com/firmata/arduino#firmata-client-libraries - - Copyright (C) 2006-2008 Hans-Christoph Steiner. All rights reserved. - Copyright (C) 2010-2011 Paul Stoffregen. All rights reserved. - Copyright (C) 2009 Shigeru Kobayashi. All rights reserved. - Copyright (C) 2009-2016 Jeff Hoefs. All rights reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - See file LICENSE.txt for further informations on licensing terms. - - Last updated August 17th, 2017 -*/ - -#include -#include -#include -#include - -//Comment the line below, "#define PID", if you are not using PID else uncomment it and follow further instructions. -#define PID - -//------------PID values---------------- -// Pin 6 - setPoint (input value) -// Pin 5 - feedback (input value) -// Pin 15 - control (output value) - -//If you use real analog pin for input for PID just uncomment next line with #define REAL_INPUT, if use virtual sources comment this line -//If you use both real will be prefered -//#define REAL_INPUT -// This line define analog pin for read values from real sources -#define AREAD_PIN A1 - - -#define PID_OUTPUT_MIN -512.0 -#define PID_OUTPUT_MAX 512.0 -#define PID_KP 15 -#define PID_KI 10 -#define PID_KD 10 -#define PID_BANG_BANG 40 -#define PID_INTERVAL 100 - - - - -#define I2C_WRITE B00000000 -#define I2C_READ B00001000 -#define I2C_READ_CONTINUOUSLY B00010000 -#define I2C_STOP_READING B00011000 -#define I2C_READ_WRITE_MODE_MASK B00011000 -#define I2C_10BIT_ADDRESS_MODE_MASK B00100000 -#define I2C_END_TX_MASK B01000000 -#define I2C_STOP_TX 1 -#define I2C_RESTART_TX 0 -#define I2C_MAX_QUERIES 8 -#define I2C_REGISTER_NOT_SPECIFIED -1 - -// the minimum interval for sampling analog input -#define MINIMUM_SAMPLING_INTERVAL 1 - - -/*============================================================================== - * GLOBAL VARIABLES - *============================================================================*/ - -#ifdef FIRMATA_SERIAL_FEATURE -SerialFirmata serialFeature; -#endif - -/* analog inputs */ -int analogInputsToReport = 0; // bitwise array to store pin reporting - -/* digital input ports */ -byte reportPINs[TOTAL_PORTS]; // 1 = report this port, 0 = silence -byte previousPINs[TOTAL_PORTS]; // previous 8 bits sent - -/* pins configuration */ -byte portConfigInputs[TOTAL_PORTS]; // each bit: 1 = pin in INPUT, 0 = anything else - -/* timer variables */ -unsigned long currentMillis; // store the current value from millis() -unsigned long previousMillis; // for comparison with currentMillis -unsigned int samplingInterval = 19; // how often to run the main loop (in ms) - -/* i2c data */ -struct i2c_device_info { - byte addr; - int reg; - byte bytes; - byte stopTX; -}; - - -double currentPoint=0.0, setPoint=0.0, control_value=0.0; - -#ifdef PID - AutoPID myPID(¤tPoint, &setPoint, &control_value, PID_OUTPUT_MIN, PID_OUTPUT_MAX, PID_KP, PID_KI, PID_KD); -#endif - - -/* for i2c read continuous more */ -i2c_device_info query[I2C_MAX_QUERIES]; - -byte i2cRxData[64]; -boolean isI2CEnabled = false; -signed char queryIndex = -1; -// default delay time between i2c read request and Wire.requestFrom() -unsigned int i2cReadDelayTime = 0; - -Servo servos[MAX_SERVOS]; -byte servoPinMap[TOTAL_PINS]; -byte detachedServos[MAX_SERVOS]; -byte detachedServoCount = 0; -byte servoCount = 0; - -boolean isResetting = false; - -// Forward declare a few functions to avoid compiler errors with older versions -// of the Arduino IDE. -void setPinModeCallback(byte, int); -void reportAnalogCallback(byte analogPin, int value); -void sysexCallback(byte, byte, byte*); - -/* utility functions */ -void wireWrite(byte data) -{ -#if ARDUINO >= 100 - Wire.write((byte)data); -#else - Wire.send(data); -#endif -} - -byte wireRead(void) -{ -#if ARDUINO >= 100 - return Wire.read(); -#else - return Wire.receive(); -#endif -} - - /*============================================================================== - * PID - *==============================================================================*/ - -void update_setPoint(int value) -{ - - #ifdef REAL_INPUT - setPoint=(double)analogRead(AREAD_PIN); - #else - setPoint=(double)(value-512); - #endif - } - -void update_currentPoint(int value) -{ - currentPoint=(double)(value-512); -} - -/*============================================================================== - * FUNCTIONS - *============================================================================*/ - -void attachServo(byte pin, int minPulse, int maxPulse) -{ - if (servoCount < MAX_SERVOS) { - // reuse indexes of detached servos until all have been reallocated - if (detachedServoCount > 0) { - servoPinMap[pin] = detachedServos[detachedServoCount - 1]; - if (detachedServoCount > 0) detachedServoCount--; - } else { - servoPinMap[pin] = servoCount; - servoCount++; - } - if (minPulse > 0 && maxPulse > 0) { - servos[servoPinMap[pin]].attach(PIN_TO_DIGITAL(pin), minPulse, maxPulse); - } else { - servos[servoPinMap[pin]].attach(PIN_TO_DIGITAL(pin)); - } - } else { - Firmata.sendString("Max servos attached"); - } -} - -void detachServo(byte pin) -{ - servos[servoPinMap[pin]].detach(); - // if we're detaching the last servo, decrement the count - // otherwise store the index of the detached servo - if (servoPinMap[pin] == servoCount && servoCount > 0) { - servoCount--; - } else if (servoCount > 0) { - // keep track of detached servos because we want to reuse their indexes - // before incrementing the count of attached servos - detachedServoCount++; - detachedServos[detachedServoCount - 1] = servoPinMap[pin]; - } - - servoPinMap[pin] = 255; -} - -void enableI2CPins() -{ - byte i; - // is there a faster way to do this? would probaby require importing - // Arduino.h to get SCL and SDA pins - for (i = 0; i < TOTAL_PINS; i++) { - if (IS_PIN_I2C(i)) { - // mark pins as i2c so they are ignore in non i2c data requests - setPinModeCallback(i, PIN_MODE_I2C); - } - } - - isI2CEnabled = true; - - Wire.begin(); -} - -/* disable the i2c pins so they can be used for other functions */ -void disableI2CPins() { - isI2CEnabled = false; - // disable read continuous mode for all devices - queryIndex = -1; -} - -void readAndReportData(byte address, int theRegister, byte numBytes, byte stopTX) { - // allow I2C requests that don't require a register read - // for example, some devices using an interrupt pin to signify new data available - // do not always require the register read so upon interrupt you call Wire.requestFrom() - if (theRegister != I2C_REGISTER_NOT_SPECIFIED) { - Wire.beginTransmission(address); - wireWrite((byte)theRegister); - Wire.endTransmission(stopTX); // default = true - // do not set a value of 0 - if (i2cReadDelayTime > 0) { - // delay is necessary for some devices such as WiiNunchuck - delayMicroseconds(i2cReadDelayTime); - } - } else { - theRegister = 0; // fill the register with a dummy value - } - - Wire.requestFrom(address, numBytes); // all bytes are returned in requestFrom - - // check to be sure correct number of bytes were returned by slave - if (numBytes < Wire.available()) { - Firmata.sendString("I2C: Too many bytes received"); - } else if (numBytes > Wire.available()) { - Firmata.sendString("I2C: Too few bytes received"); - } - - i2cRxData[0] = address; - i2cRxData[1] = theRegister; - - for (int i = 0; i < numBytes && Wire.available(); i++) { - i2cRxData[2 + i] = wireRead(); - } - - // send slave address, register and received bytes - Firmata.sendSysex(SYSEX_I2C_REPLY, numBytes + 2, i2cRxData); -} - -void outputPort(byte portNumber, byte portValue, byte forceSend) -{ - // pins not configured as INPUT are cleared to zeros - portValue = portValue & portConfigInputs[portNumber]; - // only send if the value is different than previously sent - if (forceSend || previousPINs[portNumber] != portValue) { - Firmata.sendDigitalPort(portNumber, portValue); - previousPINs[portNumber] = portValue; - } -} - -/* ----------------------------------------------------------------------------- - * check all the active digital inputs for change of state, then add any events - * to the Serial output queue using Serial.print() */ -void checkDigitalInputs(void) -{ - /* Using non-looping code allows constants to be given to readPort(). - * The compiler will apply substantial optimizations if the inputs - * to readPort() are compile-time constants. */ - if (TOTAL_PORTS > 0 && reportPINs[0]) outputPort(0, readPort(0, portConfigInputs[0]), false); - if (TOTAL_PORTS > 1 && reportPINs[1]) outputPort(1, readPort(1, portConfigInputs[1]), false); - if (TOTAL_PORTS > 2 && reportPINs[2]) outputPort(2, readPort(2, portConfigInputs[2]), false); - if (TOTAL_PORTS > 3 && reportPINs[3]) outputPort(3, readPort(3, portConfigInputs[3]), false); - if (TOTAL_PORTS > 4 && reportPINs[4]) outputPort(4, readPort(4, portConfigInputs[4]), false); - if (TOTAL_PORTS > 5 && reportPINs[5]) outputPort(5, readPort(5, portConfigInputs[5]), false); - if (TOTAL_PORTS > 6 && reportPINs[6]) outputPort(6, readPort(6, portConfigInputs[6]), false); - if (TOTAL_PORTS > 7 && reportPINs[7]) outputPort(7, readPort(7, portConfigInputs[7]), false); - if (TOTAL_PORTS > 8 && reportPINs[8]) outputPort(8, readPort(8, portConfigInputs[8]), false); - if (TOTAL_PORTS > 9 && reportPINs[9]) outputPort(9, readPort(9, portConfigInputs[9]), false); - if (TOTAL_PORTS > 10 && reportPINs[10]) outputPort(10, readPort(10, portConfigInputs[10]), false); - if (TOTAL_PORTS > 11 && reportPINs[11]) outputPort(11, readPort(11, portConfigInputs[11]), false); - if (TOTAL_PORTS > 12 && reportPINs[12]) outputPort(12, readPort(12, portConfigInputs[12]), false); - if (TOTAL_PORTS > 13 && reportPINs[13]) outputPort(13, readPort(13, portConfigInputs[13]), false); - if (TOTAL_PORTS > 14 && reportPINs[14]) outputPort(14, readPort(14, portConfigInputs[14]), false); - if (TOTAL_PORTS > 15 && reportPINs[15]) outputPort(15, readPort(15, portConfigInputs[15]), false); -} - -// ----------------------------------------------------------------------------- -/* sets the pin mode to the correct state and sets the relevant bits in the - * two bit-arrays that track Digital I/O and PWM status - */ -void setPinModeCallback(byte pin, int mode) -{ - if (Firmata.getPinMode(pin) == PIN_MODE_IGNORE) - return; - - if (Firmata.getPinMode(pin) == PIN_MODE_I2C && isI2CEnabled && mode != PIN_MODE_I2C) { - // disable i2c so pins can be used for other functions - // the following if statements should reconfigure the pins properly - disableI2CPins(); - } - if (IS_PIN_DIGITAL(pin) && mode != PIN_MODE_SERVO) { - if (servoPinMap[pin] < MAX_SERVOS && servos[servoPinMap[pin]].attached()) { - detachServo(pin); - } - } - if (IS_PIN_ANALOG(pin)) { - reportAnalogCallback(PIN_TO_ANALOG(pin), mode == PIN_MODE_ANALOG ? 1 : 0); // turn on/off reporting - } - if (IS_PIN_DIGITAL(pin)) { - if (mode == INPUT || mode == PIN_MODE_PULLUP) { - portConfigInputs[pin / 8] |= (1 << (pin & 7)); - } else { - portConfigInputs[pin / 8] &= ~(1 << (pin & 7)); - } - } - Firmata.setPinState(pin, 0); - switch (mode) { - case PIN_MODE_ANALOG: - if (IS_PIN_ANALOG(pin)) { - if (IS_PIN_DIGITAL(pin)) { - pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver -#if ARDUINO <= 100 - // deprecated since Arduino 1.0.1 - TODO: drop support in Firmata 2.6 - digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups -#endif - } - Firmata.setPinMode(pin, PIN_MODE_ANALOG); - } - break; - case INPUT: - if (IS_PIN_DIGITAL(pin)) { - pinMode(PIN_TO_DIGITAL(pin), INPUT); // disable output driver -#if ARDUINO <= 100 - // deprecated since Arduino 1.0.1 - TODO: drop support in Firmata 2.6 - digitalWrite(PIN_TO_DIGITAL(pin), LOW); // disable internal pull-ups -#endif - Firmata.setPinMode(pin, INPUT); - } - break; - case PIN_MODE_PULLUP: - if (IS_PIN_DIGITAL(pin)) { - pinMode(PIN_TO_DIGITAL(pin), INPUT_PULLUP); - Firmata.setPinMode(pin, PIN_MODE_PULLUP); - Firmata.setPinState(pin, 1); - } - break; - case OUTPUT: - if (IS_PIN_DIGITAL(pin)) { - if (Firmata.getPinMode(pin) == PIN_MODE_PWM) { - // Disable PWM if pin mode was previously set to PWM. - digitalWrite(PIN_TO_DIGITAL(pin), LOW); - } - pinMode(PIN_TO_DIGITAL(pin), OUTPUT); - Firmata.setPinMode(pin, OUTPUT); - } - break; - case PIN_MODE_PWM: - if (IS_PIN_PWM(pin)) { - pinMode(PIN_TO_PWM(pin), OUTPUT); - analogWrite(PIN_TO_PWM(pin), 0); - Firmata.setPinMode(pin, PIN_MODE_PWM); - } - break; - case PIN_MODE_SERVO: - if (IS_PIN_DIGITAL(pin)) { - Firmata.setPinMode(pin, PIN_MODE_SERVO); - if (servoPinMap[pin] == 255 || !servos[servoPinMap[pin]].attached()) { - // pass -1 for min and max pulse values to use default values set - // by Servo library - attachServo(pin, -1, -1); - } - } - break; - case PIN_MODE_I2C: - if (IS_PIN_I2C(pin)) { - // mark the pin as i2c - // the user must call I2C_CONFIG to enable I2C for a device - Firmata.setPinMode(pin, PIN_MODE_I2C); - } - break; - case PIN_MODE_SERIAL: -#ifdef FIRMATA_SERIAL_FEATURE - serialFeature.handlePinMode(pin, PIN_MODE_SERIAL); -#endif - break; - default: - Firmata.sendString("Unknown pin mode"); // TODO: put error msgs in EEPROM - } - // TODO: save status to EEPROM here, if changed -} - -/* - * Sets the value of an individual pin. Useful if you want to set a pin value but - * are not tracking the digital port state. - * Can only be used on pins configured as OUTPUT. - * Cannot be used to enable pull-ups on Digital INPUT pins. - */ -void setPinValueCallback(byte pin, int value) -{ - if (pin < TOTAL_PINS && IS_PIN_DIGITAL(pin)) { - if (Firmata.getPinMode(pin) == OUTPUT) { - Firmata.setPinState(pin, value); - digitalWrite(PIN_TO_DIGITAL(pin), value); - } - } -} - -void analogWriteCallback(byte pin, int value) -{ - if (pin < TOTAL_PINS) { - switch (Firmata.getPinMode(pin)) { - case PIN_MODE_SERVO: - if (IS_PIN_DIGITAL(pin)) - servos[servoPinMap[pin]].write(value); - Firmata.setPinState(pin, value); - break; - case PIN_MODE_PWM: - if (IS_PIN_PWM(pin)) - //analogWrite(PIN_TO_PWM(pin), value); - switch(pin) - { - case 5: - update_currentPoint(value); - break; - case 6: - update_setPoint(value); - } - - Firmata.setPinState(pin, value); - break; - } - } -} - -void digitalWriteCallback(byte port, int value) -{ - byte pin, lastPin, pinValue, mask = 1, pinWriteMask = 0; - - if (port < TOTAL_PORTS) { - // create a mask of the pins on this port that are writable. - lastPin = port * 8 + 8; - if (lastPin > TOTAL_PINS) lastPin = TOTAL_PINS; - for (pin = port * 8; pin < lastPin; pin++) { - // do not disturb non-digital pins (eg, Rx & Tx) - if (IS_PIN_DIGITAL(pin)) { - // do not touch pins in PWM, ANALOG, SERVO or other modes - if (Firmata.getPinMode(pin) == OUTPUT || Firmata.getPinMode(pin) == INPUT) { - pinValue = ((byte)value & mask) ? 1 : 0; - if (Firmata.getPinMode(pin) == OUTPUT) { - pinWriteMask |= mask; - } else if (Firmata.getPinMode(pin) == INPUT && pinValue == 1 && Firmata.getPinState(pin) != 1) { - // only handle INPUT here for backwards compatibility -#if ARDUINO > 100 - pinMode(pin, INPUT_PULLUP); -#else - // only write to the INPUT pin to enable pullups if Arduino v1.0.0 or earlier - pinWriteMask |= mask; -#endif - } - Firmata.setPinState(pin, pinValue); - } - } - mask = mask << 1; - } - writePort(port, (byte)value, pinWriteMask); - } -} - - -// ----------------------------------------------------------------------------- -/* sets bits in a bit array (int) to toggle the reporting of the analogIns - */ -//void FirmataClass::setAnalogPinReporting(byte pin, byte state) { -//} -void reportAnalogCallback(byte analogPin, int value) -{ - if (analogPin < TOTAL_ANALOG_PINS) { - if (value == 0) { - analogInputsToReport = analogInputsToReport & ~ (1 << analogPin); - } else { - analogInputsToReport = analogInputsToReport | (1 << analogPin); - // prevent during system reset or all analog pin values will be reported - // which may report noise for unconnected analog pins - if (!isResetting) { - // Send pin value immediately. This is helpful when connected via - // ethernet, wi-fi or bluetooth so pin states can be known upon - // reconnecting. - Firmata.sendAnalog(analogPin, analogRead(analogPin)); - } - } - } - // TODO: save status to EEPROM here, if changed -} - -void reportDigitalCallback(byte port, int value) -{ - if (port < TOTAL_PORTS) { - reportPINs[port] = (byte)value; - // Send port value immediately. This is helpful when connected via - // ethernet, wi-fi or bluetooth so pin states can be known upon - // reconnecting. - if (value) outputPort(port, readPort(port, portConfigInputs[port]), true); - } - // do not disable analog reporting on these 8 pins, to allow some - // pins used for digital, others analog. Instead, allow both types - // of reporting to be enabled, but check if the pin is configured - // as analog when sampling the analog inputs. Likewise, while - // scanning digital pins, portConfigInputs will mask off values from any - // pins configured as analog -} - -/*============================================================================== - * SYSEX-BASED commands - *============================================================================*/ - -void sysexCallback(byte command, byte argc, byte *argv) -{ - byte mode; - byte stopTX; - byte slaveAddress; - byte data; - int slaveRegister; - unsigned int delayTime; - - switch (command) { - case I2C_REQUEST: - mode = argv[1] & I2C_READ_WRITE_MODE_MASK; - if (argv[1] & I2C_10BIT_ADDRESS_MODE_MASK) { - Firmata.sendString("10-bit addressing not supported"); - return; - } - else { - slaveAddress = argv[0]; - } - - // need to invert the logic here since 0 will be default for client - // libraries that have not updated to add support for restart tx - if (argv[1] & I2C_END_TX_MASK) { - stopTX = I2C_RESTART_TX; - } - else { - stopTX = I2C_STOP_TX; // default - } - - switch (mode) { - case I2C_WRITE: - Wire.beginTransmission(slaveAddress); - for (byte i = 2; i < argc; i += 2) { - data = argv[i] + (argv[i + 1] << 7); - wireWrite(data); - } - Wire.endTransmission(); - delayMicroseconds(70); - break; - case I2C_READ: - if (argc == 6) { - // a slave register is specified - slaveRegister = argv[2] + (argv[3] << 7); - data = argv[4] + (argv[5] << 7); // bytes to read - } - else { - // a slave register is NOT specified - slaveRegister = I2C_REGISTER_NOT_SPECIFIED; - data = argv[2] + (argv[3] << 7); // bytes to read - } - readAndReportData(slaveAddress, (int)slaveRegister, data, stopTX); - break; - case I2C_READ_CONTINUOUSLY: - if ((queryIndex + 1) >= I2C_MAX_QUERIES) { - // too many queries, just ignore - Firmata.sendString("too many queries"); - break; - } - if (argc == 6) { - // a slave register is specified - slaveRegister = argv[2] + (argv[3] << 7); - data = argv[4] + (argv[5] << 7); // bytes to read - } - else { - // a slave register is NOT specified - slaveRegister = (int)I2C_REGISTER_NOT_SPECIFIED; - data = argv[2] + (argv[3] << 7); // bytes to read - } - queryIndex++; - query[queryIndex].addr = slaveAddress; - query[queryIndex].reg = slaveRegister; - query[queryIndex].bytes = data; - query[queryIndex].stopTX = stopTX; - break; - case I2C_STOP_READING: - byte queryIndexToSkip; - // if read continuous mode is enabled for only 1 i2c device, disable - // read continuous reporting for that device - if (queryIndex <= 0) { - queryIndex = -1; - } else { - queryIndexToSkip = 0; - // if read continuous mode is enabled for multiple devices, - // determine which device to stop reading and remove it's data from - // the array, shifiting other array data to fill the space - for (byte i = 0; i < queryIndex + 1; i++) { - if (query[i].addr == slaveAddress) { - queryIndexToSkip = i; - break; - } - } - - for (byte i = queryIndexToSkip; i < queryIndex + 1; i++) { - if (i < I2C_MAX_QUERIES) { - query[i].addr = query[i + 1].addr; - query[i].reg = query[i + 1].reg; - query[i].bytes = query[i + 1].bytes; - query[i].stopTX = query[i + 1].stopTX; - } - } - queryIndex--; - } - break; - default: - break; - } - break; - case I2C_CONFIG: - delayTime = (argv[0] + (argv[1] << 7)); - - if (argc > 1 && delayTime > 0) { - i2cReadDelayTime = delayTime; - } - - if (!isI2CEnabled) { - enableI2CPins(); - } - - break; - case SERVO_CONFIG: - if (argc > 4) { - // these vars are here for clarity, they'll optimized away by the compiler - byte pin = argv[0]; - int minPulse = argv[1] + (argv[2] << 7); - int maxPulse = argv[3] + (argv[4] << 7); - - if (IS_PIN_DIGITAL(pin)) { - if (servoPinMap[pin] < MAX_SERVOS && servos[servoPinMap[pin]].attached()) { - detachServo(pin); - } - attachServo(pin, minPulse, maxPulse); - setPinModeCallback(pin, PIN_MODE_SERVO); - } - } - break; - case SAMPLING_INTERVAL: - if (argc > 1) { - samplingInterval = argv[0] + (argv[1] << 7); - if (samplingInterval < MINIMUM_SAMPLING_INTERVAL) { - samplingInterval = MINIMUM_SAMPLING_INTERVAL; - } - } else { - //Firmata.sendString("Not enough data"); - } - break; - case EXTENDED_ANALOG: - if (argc > 1) { - int val = argv[1]; - if (argc > 2) val |= (argv[2] << 7); - if (argc > 3) val |= (argv[3] << 14); - analogWriteCallback(argv[0], val); - } - break; - case CAPABILITY_QUERY: - Firmata.write(START_SYSEX); - Firmata.write(CAPABILITY_RESPONSE); - for (byte pin = 0; pin < TOTAL_PINS; pin++) { - if (IS_PIN_DIGITAL(pin)) { - Firmata.write((byte)INPUT); - Firmata.write(1); - Firmata.write((byte)PIN_MODE_PULLUP); - Firmata.write(1); - Firmata.write((byte)OUTPUT); - Firmata.write(1); - } - if (IS_PIN_ANALOG(pin)) { - Firmata.write(PIN_MODE_ANALOG); - Firmata.write(10); // 10 = 10-bit resolution - } - if (IS_PIN_PWM(pin)) { - Firmata.write(PIN_MODE_PWM); - Firmata.write(DEFAULT_PWM_RESOLUTION); - } - if (IS_PIN_DIGITAL(pin)) { - Firmata.write(PIN_MODE_SERVO); - Firmata.write(14); - } - if (IS_PIN_I2C(pin)) { - Firmata.write(PIN_MODE_I2C); - Firmata.write(1); // TODO: could assign a number to map to SCL or SDA - } -#ifdef FIRMATA_SERIAL_FEATURE - serialFeature.handleCapability(pin); -#endif - Firmata.write(127); - } - Firmata.write(END_SYSEX); - break; - case PIN_STATE_QUERY: - if (argc > 0) { - byte pin = argv[0]; - Firmata.write(START_SYSEX); - Firmata.write(PIN_STATE_RESPONSE); - Firmata.write(pin); - if (pin < TOTAL_PINS) { - Firmata.write(Firmata.getPinMode(pin)); - Firmata.write((byte)Firmata.getPinState(pin) & 0x7F); - if (Firmata.getPinState(pin) & 0xFF80) Firmata.write((byte)(Firmata.getPinState(pin) >> 7) & 0x7F); - if (Firmata.getPinState(pin) & 0xC000) Firmata.write((byte)(Firmata.getPinState(pin) >> 14) & 0x7F); - } - Firmata.write(END_SYSEX); - } - break; - case ANALOG_MAPPING_QUERY: - Firmata.write(START_SYSEX); - Firmata.write(ANALOG_MAPPING_RESPONSE); - for (byte pin = 0; pin < TOTAL_PINS; pin++) { - Firmata.write(IS_PIN_ANALOG(pin) ? PIN_TO_ANALOG(pin) : 127); - } - Firmata.write(END_SYSEX); - break; - - case SERIAL_MESSAGE: -#ifdef FIRMATA_SERIAL_FEATURE - serialFeature.handleSysex(command, argc, argv); -#endif - break; - } -} - -/*============================================================================== - * SETUP() - *============================================================================*/ - -void systemResetCallback() -{ - isResetting = true; - - // initialize a defalt state - // TODO: option to load config from EEPROM instead of default - -#ifdef FIRMATA_SERIAL_FEATURE - serialFeature.reset(); -#endif - - if (isI2CEnabled) { - disableI2CPins(); - } - - for (byte i = 0; i < TOTAL_PORTS; i++) { - reportPINs[i] = false; // by default, reporting off - portConfigInputs[i] = 0; // until activated - previousPINs[i] = 0; - } - - for (byte i = 0; i < TOTAL_PINS; i++) { - // pins with analog capability default to analog input - // otherwise, pins default to digital output - if (IS_PIN_ANALOG(i)) { - // turns off pullup, configures everything - setPinModeCallback(i, PIN_MODE_ANALOG); - } else if (IS_PIN_DIGITAL(i)) { - // sets the output to 0, configures portConfigInputs - setPinModeCallback(i, OUTPUT); - } - - servoPinMap[i] = 255; - } - // by default, do not report any analog inputs - analogInputsToReport = 0; - - detachedServoCount = 0; - servoCount = 0; - - /* send digital inputs to set the initial state on the host computer, - * since once in the loop(), this firmware will only send on change */ - /* - TODO: this can never execute, since no pins default to digital input - but it will be needed when/if we support EEPROM stored config - for (byte i=0; i < TOTAL_PORTS; i++) { - outputPort(i, readPort(i, portConfigInputs[i]), true); - } - */ - isResetting = false; -} - -void setup() -{ - Firmata.setFirmwareVersion(FIRMATA_FIRMWARE_MAJOR_VERSION, FIRMATA_FIRMWARE_MINOR_VERSION); - - Firmata.attach(ANALOG_MESSAGE, analogWriteCallback); - Firmata.attach(DIGITAL_MESSAGE, digitalWriteCallback); - Firmata.attach(REPORT_ANALOG, reportAnalogCallback); - Firmata.attach(REPORT_DIGITAL, reportDigitalCallback); - Firmata.attach(SET_PIN_MODE, setPinModeCallback); - Firmata.attach(SET_DIGITAL_PIN_VALUE, setPinValueCallback); - Firmata.attach(START_SYSEX, sysexCallback); - Firmata.attach(SYSTEM_RESET, systemResetCallback); - - // to use a port other than Serial, such as Serial1 on an Arduino Leonardo or Mega, - // Call begin(baud) on the alternate serial port and pass it to Firmata to begin like this: - // Serial1.begin(57600); - // Firmata.begin(Serial1); - // However do not do this if you are using SERIAL_MESSAGE - - Firmata.begin(57600); - while (!Serial) { - ; // wait for serial port to connect. Needed for ATmega32u4-based boards and Arduino 101 - } - - systemResetCallback(); // reset to default config - - #ifdef PID - //if temperature is more than 4 below or above setpoint, OUTPUT will be set to min or max respectively - myPID.setBangBang(PID_BANG_BANG); - //set PID update interval to - myPID.setTimeStep(PID_INTERVAL); - #endif -} - -/*============================================================================== - * LOOP() - *============================================================================*/ -void loop() -{ - byte pin, analogPin; - - /* DIGITALREAD - as fast as possible, check for changes and output them to the - * FTDI buffer using Serial.print() */ - checkDigitalInputs(); - - /* STREAMREAD - processing incoming messagse as soon as possible, while still - * checking digital inputs. */ - while (Firmata.available()) - Firmata.processInput(); - - #ifdef PID - #ifdef REAL_INPUT - update_setPoint(1); - #endif - myPID.run(); //call every loop, updates automatically at certain time interval - #endif - - // TODO - ensure that Stream buffer doesn't go over 60 bytes - - currentMillis = millis(); - if (currentMillis - previousMillis > samplingInterval) { - previousMillis += samplingInterval; - /* ANALOGREAD - do all analogReads() at the configured sampling interval */ - for (pin = 0; pin < TOTAL_PINS; pin++) { - if (IS_PIN_ANALOG(pin) && Firmata.getPinMode(pin) == PIN_MODE_ANALOG) { - analogPin = PIN_TO_ANALOG(pin); - if (analogInputsToReport & (1 << analogPin)) { - #ifdef PID - Firmata.sendAnalog(analogPin, (int)(control_value+512.0)); - #else - Firmata.sendAnalog(analogPin, analogRead(analogPin)); - #endif - } - } - } - // report i2c data for all device with read continuous mode enabled - if (queryIndex > -1) { - for (byte i = 0; i < queryIndex + 1; i++) { - readAndReportData(query[i].addr, query[i].reg, query[i].bytes, query[i].stopTX); - } - } - } - -#ifdef FIRMATA_SERIAL_FEATURE - serialFeature.update(); -#endif -} -- cgit