From 1fa449fed953fa11f6bd0ea82cc2d3b115ee0781 Mon Sep 17 00:00:00 2001 From: saurabhb17 Date: Wed, 26 Feb 2020 16:36:01 +0530 Subject: Remaining files transfered --- scripts/kicad-install.sh | 408 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 408 insertions(+) create mode 100755 scripts/kicad-install.sh (limited to 'scripts/kicad-install.sh') diff --git a/scripts/kicad-install.sh b/scripts/kicad-install.sh new file mode 100755 index 0000000..a0f9781 --- /dev/null +++ b/scripts/kicad-install.sh @@ -0,0 +1,408 @@ +#!/bin/bash -e +# Install KiCad from source onto either: +# -> a Ubuntu/Debian/Mint or +# -> a Red Hat +# compatible linux system. +# +# The "install_prerequisites" step is the only "distro dependent" one. That step could be modified +# for other linux distros. +# +# There are 3 package groups in a KiCad install: +# 1) Compiled source code in the form of executable programs. +# 2) User manuals and other documentation typically as *.pdf files. +# 3) a) Schematic parts, b) layout footprints, and c) 3D models for footprints. +# +# To achieve 1) source is checked out from its repo and compiled by this script then executables +# are installed using CMake. +# To achieve 2) documentation is checked out from its repo and installed using CMake. +# TO achieve 3a) and 3c) they are checked out from their repos and installed using CMake. +# To achieve 3b) a global fp-lib-table is put into your home directory which points to +# http://github.com/KiCad. No actual footprints are installed locally, internet access is used +# during program operation to fetch footprints from github as if it was a remote drive in the cloud. +# If you want to install those same KiCad footprints locally, you may run a separate script +# named library-repos-install.sh found in this same directory. That script requires that "git" be on +# your system whereas this script does not. The footprints require some means to download them and +# bzr-git seems not up to the task. wget or curl would also work. + + +# Since bash is invoked with -e by the first line of this script, all the steps in this script +# must succeed otherwise bash will abort at the first non-zero error code. Therefore any script +# functions must be crafted to anticipate numerous conditions, such that no command fails unless it +# is a serious situation. + + +# Set where the 3 source trees will go, use a full path +WORKING_TREES=~/kicad_sources + +STABLE=5054 # a sensible mix of features and stability +TESTING=last:1 # the most recent + +# Set this to STABLE or TESTING or other known revision number: +REVISION=$TESTING + +# For info on revision syntax: +# $ bzr help revisionspec + + +# CMake Options +OPTS="$OPTS -DBUILD_GITHUB_PLUGIN=ON" # needed by $STABLE revision + +# Python scripting, uncomment only one to enable: + +# Basic python scripting: gives access to wizards like footprint wizards (recommended) +# be sure you have python 2.7 installed +#OPTS="$OPTS -DKICAD_SCRIPTING=ON" + +# More advanced python scripting: gives access to wizards like footprint wizards and creates a python module +# to edit board files (.kicad_pcb files) outside kicad, by python scripts +#OPTS="$OPTS -DKICAD_SCRIPTING=ON -DKICAD_SCRIPTING_MODULES=ON" + +# Most advanced python scripting: you can execute python scripts inside Pcbnew to edit the current loaded board +# mainly for advanced users +#OPTS="$OPTS -DKICAD_SCRIPTING=ON -DKICAD_SCRIPTING_MODULES=ON -DKICAD_SCRIPTING_WXPYTHON=ON" + +# Use https under bazaar to retrieve repos because this does not require a +# launchpad.net account. Whereas lp: requires a launchpad account. +# https results in read only access. +REPOS=https://code.launchpad.net + +# This branch is a bzr/launchpad import of the Git repository +# at https://github.com/KiCad/kicad-library.git. +# It has schematic parts and 3D models in it. +LIBS_REPO=$REPOS/~kicad-product-committers/kicad/library + +SRCS_REPO=$REPOS/~kicad-product-committers/kicad/product +DOCS_REPO=$REPOS/~kicad-developers/kicad/doc + + +usage() +{ + echo "" + echo " usage:" + echo "" + echo "./kicad-install.sh " + echo " where is one of:" + echo " --install-or-update (does full installation or update.)" + echo " --remove-sources (removes source trees for another attempt.)" + echo " --uninstall-libraries (removes KiCad supplied libraries.)" + echo " --uninstall-kicad (uninstalls all of KiCad but leaves source trees.)" + echo "" + echo "example:" + echo ' $ ./kicad-install.sh --install-or-update' +} + + +install_prerequisites() +{ + # Find a package manager, PM + PM=$( command -v yum || command -v apt-get ) + + # assume all these Debian, Mint, Ubuntu systems have same prerequisites + if [ "$(expr match "$PM" '.*\(apt-get\)')" == "apt-get" ]; then + #echo "debian compatible system" + prerequisite_list=" + bzr + bzrtools + build-essential + cmake + cmake-curses-gui + debhelper + doxygen + grep + libbz2-dev + libcairo2-dev + libglew-dev + libssl-dev + libwxgtk3.0-dev + " + + for p in ${prerequisite_list} + do + sudo apt-get install $p || exit 1 + done + + # Only install the scripting prerequisites if required. + if [ "$(expr match "$OPTS" '.*\(-DKICAD_SCRIPTING=ON\)')" == "-DKICAD_SCRIPTING=ON" ]; then + #echo "KICAD_SCRIPTING=ON" + scripting_prerequisites=" + python-dev + python-wxgtk3.0-dev + swig + " + + for sp in ${scripting_prerequisites} + do + sudo apt-get install $sp || exit 1 + done + fi + + # assume all yum systems have same prerequisites + elif [ "$(expr match "$PM" '.*\(yum\)')" == "yum" ]; then + #echo "red hat compatible system" + # Note: if you find this list not to be accurate, please submit a patch: + sudo yum groupinstall "Development Tools" || exit 1 + + prerequisite_list=" + bzr + bzrtools + bzip2-libs + bzip2-devel + cmake + cmake-gui + doxygen + cairo-devel + glew-devel + grep + openssl-devel + wxGTK3-devel + " + + for p in ${prerequisite_list} + do + sudo yum install $p || exit 1 + done + + echo "Checking wxGTK version. Maybe you have to symlink /usr/bin/wx-config-3.0 to /usr/bin/wx-config" + V=`wx-config --version | cut -f 1 -d '.'` || echo "Error running wx-config." + if [ $V -lt 3 ] + then + echo "Error: wx-config is reporting version prior to 3" + exit + else + echo "All ok" + fi + # Only install the scripting prerequisites if required. + if [ "$(expr match "$OPTS" '.*\(-DKICAD_SCRIPTING=ON\)')" == "-DKICAD_SCRIPTING=ON" ]; then + #echo "KICAD_SCRIPTING=ON" + scripting_prerequisites=" + swig + wxPython + " + + for sp in ${scripting_prerequisites} + do + sudo yum install $sp || exit 1 + done + fi + else + echo + echo "Incompatible System. Neither 'yum' nor 'apt-get' found. Not possible to continue." + echo + exit 1 + fi + + # ensure bzr name and email are set. No message since bzr prints an excellent diagnostic. + bzr whoami || { + echo "WARNING: You have not set bzr whoami, so I will set a dummy." + export BZR_EMAIL="Kicad Build " + } +} + + +rm_build_dir() +{ + local dir="$1" + + echo "removing directory $dir" + + if [ -e "$dir/install_manifest.txt" ]; then + # this file is often created as root, so remove as root + sudo rm "$dir/install_manifest.txt" 2> /dev/null + fi + + if [ -d "$dir" ]; then + rm -rf "$dir" + fi +} + + +cmake_uninstall() +{ + # assume caller set the CWD, and is only telling us about it in $1 + local dir="$1" + + cwd=`pwd` + if [ "$cwd" != "$dir" ]; then + echo "missing dir $dir" + elif [ ! -e install_manifest.txt ]; then + echo + echo "Missing file $dir/install_manifest.txt." + else + echo "uninstalling from $dir" + sudo make uninstall + sudo rm install_manifest.txt + fi +} + + +# Function set_env_var +# sets an environment variable globally. +set_env_var() +{ + local var=$1 + local val=$2 + + if [ -d /etc/profile.d ]; then + if [ ! -e /etc/profile.d/kicad.sh ] || ! grep "$var" /etc/profile.d/kicad.sh >> /dev/null; then + echo + echo "Adding environment variable $var to file /etc/profile.d/kicad.sh" + echo "Please logout and back in after this script completes for environment" + echo "variable to get set into environment." + sudo sh -c "echo export $var=$val >> /etc/profile.d/kicad.sh" + fi + + elif [ -e /etc/environment ]; then + if ! grep "$var" /etc/environment >> /dev/null; then + echo + echo "Adding environment variable $var to file /etc/environment" + echo "Please reboot after this script completes for environment variable to get set into environment." + sudo sh -c "echo $var=$val >> /etc/environment" + fi + fi +} + + +install_or_update() +{ + echo "step 1) installing pre-requisites" + install_prerequisites + + + echo "step 2) make $WORKING_TREES if it does not exist" + if [ ! -d "$WORKING_TREES" ]; then + sudo mkdir -p "$WORKING_TREES" + echo " mark $WORKING_TREES as owned by me" + sudo chown -R `whoami` "$WORKING_TREES" + fi + cd $WORKING_TREES + + + echo "step 3) checking out the source code from launchpad repo..." + if [ ! -d "$WORKING_TREES/kicad.bzr" ]; then + bzr checkout -r $REVISION $SRCS_REPO kicad.bzr + echo " source repo to local working tree." + else + cd kicad.bzr + bzr up -r $REVISION + echo " local source working tree updated." + cd ../ + fi + + echo "step 4) checking out the schematic parts and 3D library repo." + if [ ! -d "$WORKING_TREES/kicad-lib.bzr" ]; then + bzr checkout $LIBS_REPO kicad-lib.bzr + echo ' kicad-lib checked out.' + else + cd kicad-lib.bzr + bzr up + echo ' kicad-lib repo updated.' + cd ../ + fi + + echo "step 5) checking out the documentation from launchpad repo..." + if [ ! -d "$WORKING_TREES/kicad-doc.bzr" ]; then + bzr checkout $DOCS_REPO kicad-doc.bzr + echo " docs checked out." + else + cd kicad-doc.bzr + bzr up + echo " docs working tree updated." + cd ../ + fi + + + echo "step 6) compiling source code..." + cd kicad.bzr + if [ ! -d "build" ]; then + mkdir build && cd build + cmake $OPTS ../ || exit 1 + else + cd build + # Although a "make clean" is sometimes needed, more often than not it slows down the update + # more than it is worth. Do it manually if you need to in this directory. + # make clean + fi + make -j4 || exit 1 + echo " kicad compiled." + + + echo "step 7) installing KiCad program files..." + sudo make install + echo " kicad program files installed." + + + echo "step 8) installing libraries..." + cd ../../kicad-lib.bzr + rm_build_dir build + mkdir build && cd build + cmake ../ + sudo make install + echo " kicad-lib.bzr installed." + + + echo "step 9) as non-root, install global fp-lib-table if none already installed..." + # install ~/fp-lib-table + if [ ! -e ~/fp-lib-table ]; then + make install_github_fp-lib-table + echo " global fp-lib-table installed." + fi + + + echo "step 10) installing documentation..." + cd ../../kicad-doc.bzr + rm_build_dir build + mkdir build && cd build + cmake ../ + sudo make install + echo " kicad-doc.bzr installed." + + echo "step 11) check for environment variables..." + if [ -z "${KIGITHUB}" ]; then + set_env_var KIGITHUB https://github.com/KiCad + fi + + echo + echo 'All KiCad "--install-or-update" steps completed, you are up to date.' + echo +} + + +if [ $# -eq 1 -a "$1" == "--remove-sources" ]; then + echo "deleting $WORKING_TREES" + rm_build_dir "$WORKING_TREES/kicad.bzr/build" + rm_build_dir "$WORKING_TREES/kicad-lib.bzr/build" + rm_build_dir "$WORKING_TREES/kicad-doc.bzr/build" + rm -rf "$WORKING_TREES" + exit +fi + + +if [ $# -eq 1 -a "$1" == "--install-or-update" ]; then + install_or_update + exit +fi + + +if [ $# -eq 1 -a "$1" == "--uninstall-libraries" ]; then + cd "$WORKING_TREES/kicad-lib.bzr/build" + cmake_uninstall "$WORKING_TREES/kicad-lib.bzr/build" + exit +fi + + +if [ $# -eq 1 -a "$1" == "--uninstall-kicad" ]; then + cd "$WORKING_TREES/kicad.bzr/build" + cmake_uninstall "$WORKING_TREES/kicad.bzr/build" + + cd "$WORKING_TREES/kicad-lib.bzr/build" + cmake_uninstall "$WORKING_TREES/kicad-lib.bzr/build" + + # this may fail since "uninstall" support is a recent feature of this repo: + cd "$WORKING_TREES/kicad-doc.bzr/build" + cmake_uninstall "$WORKING_TREES/kicad-doc.bzr/build" + + exit +fi + + +usage -- cgit