/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *                                        
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#ifndef __RTW_LED_H_
#define __RTW_LED_H_

#include <drv_conf.h>
#include <osdep_service.h>
#include <drv_types.h>

#define MSECS(t)        (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)

typedef enum _LED_CTL_MODE{
        LED_CTL_POWER_ON = 1,
        LED_CTL_LINK = 2,
        LED_CTL_NO_LINK = 3,
        LED_CTL_TX = 4,
        LED_CTL_RX = 5,
        LED_CTL_SITE_SURVEY = 6,
        LED_CTL_POWER_OFF = 7,
        LED_CTL_START_TO_LINK = 8,
        LED_CTL_START_WPS = 9,
        LED_CTL_STOP_WPS = 10,
        LED_CTL_START_WPS_BOTTON = 11, //added for runtop
        LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA	
	 LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN
}LED_CTL_MODE;


#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
//================================================================================
// LED object.
//================================================================================

typedef enum _LED_STATE_871x{
	LED_UNKNOWN = 0,
	RTW_LED_ON = 1,
	RTW_LED_OFF = 2,
	LED_BLINK_NORMAL = 3,
	LED_BLINK_SLOWLY = 4,
	LED_POWER_ON_BLINK = 5,
	LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
	LED_NO_LINK_BLINK = 7, // LED is blinking during no link state.
	LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case
	LED_BLINK_WPS = 9,	// LED is blinkg during WPS communication	
	LED_TXRX_BLINK = 10,
	LED_BLINK_WPS_STOP = 11,	//for ALPHA	
	LED_BLINK_WPS_STOP_OVERLAP = 12,	//for BELKIN
}LED_STATE_871x;

#define IS_LED_WPS_BLINKING(_LED_871x)	(((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \
					|| ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \
					|| ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress)

#define IS_LED_BLINKING(_LED_871x) 	(((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \
					||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress)

typedef enum _LED_PIN_871x{
	LED_PIN_GPIO0,
	LED_PIN_LED0,
	LED_PIN_LED1
}LED_PIN_871x;

typedef struct _LED_871x{
	_adapter				*padapter;
	LED_PIN_871x		LedPin;	// Identify how to implement this SW led.
	LED_STATE_871x		CurrLedState; // Current LED state.
	u8					bLedOn; // true if LED is ON, false if LED is OFF.

	u8					bSWLedCtrl;

	u8					bLedBlinkInProgress; // true if it is blinking, false o.w..
	// ALPHA, added by chiyoko, 20090106
	u8					bLedNoLinkBlinkInProgress;
	u8					bLedLinkBlinkInProgress;
	u8					bLedStartToLinkBlinkInProgress;
	u8					bLedScanBlinkInProgress;
	u8					bLedWPSBlinkInProgress;
	
	u32					BlinkTimes; // Number of times to toggle led state for blinking.
	LED_STATE_871x		BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.

	_timer				BlinkTimer; // Timer object for led blinking.
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)|| defined PLATFORM_FREEBSD
	_workitem			BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.
#endif
} LED_871x, *PLED_871x;


//================================================================================
// LED customization.
//================================================================================

typedef	enum _LED_STRATEGY_871x{
	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
	SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA.
	SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
	SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
	SW_LED_MODE4, //for Edimax / Belkin
	SW_LED_MODE5, //for Sercomm / Belkin
	SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7
	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
}LED_STRATEGY_871x, *PLED_STRATEGY_871x;
#endif //CONFIG_USB_HCI

#ifdef CONFIG_PCI_HCI
//================================================================================
// LED object.
//================================================================================

typedef	enum _LED_STATE_871x{
	LED_UNKNOWN = 0,
	RTW_LED_ON = 1,
	RTW_LED_OFF = 2,
	LED_BLINK_NORMAL = 3,
	LED_BLINK_SLOWLY = 4,
	LED_POWER_ON_BLINK = 5,
	LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
	LED_NO_LINK_BLINK = 7, // LED is blinking during no link state.
	LED_BLINK_StartToBlink = 8, 
	LED_BLINK_TXRX = 9,
	LED_BLINK_RUNTOP = 10, // Customized for RunTop
	LED_BLINK_CAMEO = 11,
}LED_STATE_871x;

typedef enum _LED_PIN_871x{
	LED_PIN_GPIO0,
	LED_PIN_LED0,
	LED_PIN_LED1,
	LED_PIN_LED2
}LED_PIN_871x;

typedef struct _LED_871x{
	_adapter				*padapter;

	LED_PIN_871x		LedPin;	// Identify how to implement this SW led.

	LED_STATE_871x		CurrLedState; // Current LED state.
	u8					bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.

	u8					bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
	u8					bLedWPSBlinkInProgress; // TRUE if it is blinking, FALSE o.w..

	u8					bLedSlowBlinkInProgress;//added by vivi, for led new mode
	u32					BlinkTimes; // Number of times to toggle led state for blinking.
	LED_STATE_871x		BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.

	_timer				BlinkTimer; // Timer object for led blinking.
} LED_871x, *PLED_871x;


//================================================================================
// LED customization.
//================================================================================

typedef	enum _LED_STRATEGY_871x{
	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
	SW_LED_MODE1, // SW control for PCI Express
	SW_LED_MODE2, // SW control for Cameo.
	SW_LED_MODE3, // SW contorl for RunTop.
	SW_LED_MODE4, // SW control for Netcore
	SW_LED_MODE5, //added by vivi, for led new mode, DLINK
	SW_LED_MODE6, //added by vivi, for led new mode, PRONET
	SW_LED_MODE7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec
	SW_LED_MODE8, //added by chiyokolin, for QMI
	SW_LED_MODE9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1 
	SW_LED_MODE10, //added by chiyokolin, for Edimax-ASUS
	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
}LED_STRATEGY_871x, *PLED_STRATEGY_871x;

#define LED_CM8_BLINK_INTERVAL		500	//for QMI
#endif //CONFIG_PCI_HCI

struct led_priv{
	/* add for led controll */
	LED_871x			SwLed0;
	LED_871x			SwLed1;
	LED_STRATEGY_871x	LedStrategy;
	u8					bRegUseLed;
	void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction);
	/* add for led controll */
};

#ifdef CONFIG_SW_LED
#define rtw_led_control(adapter, LedAction) \
	do { \
		if((adapter)->ledpriv.LedControlHandler) \
			(adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \
	} while(0)
#else //CONFIG_SW_LED
#define rtw_led_control(adapter, LedAction)
#endif //CONFIG_SW_LED

extern void BlinkHandler(PLED_871x	 pLed);

#endif //__RTW_LED_H_