From 871480933a1c28f8a9fed4c4d34d06c439a7a422 Mon Sep 17 00:00:00 2001
From: Srikant Patnaik
Date: Sun, 11 Jan 2015 12:28:04 +0530
Subject: Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.
---
 arch/avr32/mach-at32ap/at32ap700x.c | 2356 +++++++++++++++++++++++++++++++++++
 1 file changed, 2356 insertions(+)
 create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c

(limited to 'arch/avr32/mach-at32ap/at32ap700x.c')

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
new file mode 100644
index 00000000..0445c4fd
--- /dev/null
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -0,0 +1,2356 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dw_dmac.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+
+#include <mach/atmel-mci.h>
+#include <linux/atmel-mci.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/hmatrix.h>
+#include <mach/portmux.h>
+#include <mach/sram.h>
+
+#include <sound/atmel-abdac.h>
+#include <sound/atmel-ac97c.h>
+
+#include <video/atmel_lcdc.h>
+
+#include "clock.h"
+#include "pio.h"
+#include "pm.h"
+
+
+#define PBMEM(base)					\
+	{						\
+		.start		= base,			\
+		.end		= base + 0x3ff,		\
+		.flags		= IORESOURCE_MEM,	\
+	}
+#define IRQ(num)					\
+	{						\
+		.start		= num,			\
+		.end		= num,			\
+		.flags		= IORESOURCE_IRQ,	\
+	}
+#define NAMED_IRQ(num, _name)				\
+	{						\
+		.start		= num,			\
+		.end		= num,			\
+		.name		= _name,		\
+		.flags		= IORESOURCE_IRQ,	\
+	}
+
+/* REVISIT these assume *every* device supports DMA, but several
+ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+ */
+#define DEFINE_DEV(_name, _id)					\
+static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32);		\
+static struct platform_device _name##_id##_device = {		\
+	.name		= #_name,				\
+	.id		= _id,					\
+	.dev		= {					\
+		.dma_mask = &_name##_id##_dma_mask,		\
+		.coherent_dma_mask = DMA_BIT_MASK(32),		\
+	},							\
+	.resource	= _name##_id##_resource,		\
+	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+}
+#define DEFINE_DEV_DATA(_name, _id)				\
+static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32);		\
+static struct platform_device _name##_id##_device = {		\
+	.name		= #_name,				\
+	.id		= _id,					\
+	.dev		= {					\
+		.dma_mask = &_name##_id##_dma_mask,		\
+		.platform_data	= &_name##_id##_data,		\
+		.coherent_dma_mask = DMA_BIT_MASK(32),		\
+	},							\
+	.resource	= _name##_id##_resource,		\
+	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+}
+
+#define select_peripheral(port, pin_mask, periph, flags)	\
+	at32_select_periph(GPIO_##port##_BASE, pin_mask,	\
+			   GPIO_##periph, flags)
+
+#define DEV_CLK(_name, devname, bus, _index)			\
+static struct clk devname##_##_name = {				\
+	.name		= #_name,				\
+	.dev		= &devname##_device.dev,		\
+	.parent		= &bus##_clk,				\
+	.mode		= bus##_clk_mode,			\
+	.get_rate	= bus##_clk_get_rate,			\
+	.index		= _index,				\
+}
+
+static DEFINE_SPINLOCK(pm_lock);
+
+static struct clk osc0;
+static struct clk osc1;
+
+static unsigned long osc_get_rate(struct clk *clk)
+{
+	return at32_board_osc_rates[clk->index];
+}
+
+static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+{
+	unsigned long div, mul, rate;
+
+	div = PM_BFEXT(PLLDIV, control) + 1;
+	mul = PM_BFEXT(PLLMUL, control) + 1;
+
+	rate = clk->parent->get_rate(clk->parent);
+	rate = (rate + div / 2) / div;
+	rate *= mul;
+
+	return rate;
+}
+
+static long pll_set_rate(struct clk *clk, unsigned long rate,
+			 u32 *pll_ctrl)
+{
+	unsigned long mul;
+	unsigned long mul_best_fit = 0;
+	unsigned long div;
+	unsigned long div_min;
+	unsigned long div_max;
+	unsigned long div_best_fit = 0;
+	unsigned long base;
+	unsigned long pll_in;
+	unsigned long actual = 0;
+	unsigned long rate_error;
+	unsigned long rate_error_prev = ~0UL;
+	u32 ctrl;
+
+	/* Rate must be between 80 MHz and 200 Mhz. */
+	if (rate < 80000000UL || rate > 200000000UL)
+		return -EINVAL;
+
+	ctrl = PM_BF(PLLOPT, 4);
+	base = clk->parent->get_rate(clk->parent);
+
+	/* PLL input frequency must be between 6 MHz and 32 MHz. */
+	div_min = DIV_ROUND_UP(base, 32000000UL);
+	div_max = base / 6000000UL;
+
+	if (div_max < div_min)
+		return -EINVAL;
+
+	for (div = div_min; div <= div_max; div++) {
+		pll_in = (base + div / 2) / div;
+		mul = (rate + pll_in / 2) / pll_in;
+
+		if (mul == 0)
+			continue;
+
+		actual = pll_in * mul;
+		rate_error = abs(actual - rate);
+
+		if (rate_error < rate_error_prev) {
+			mul_best_fit = mul;
+			div_best_fit = div;
+			rate_error_prev = rate_error;
+		}
+
+		if (rate_error == 0)
+			break;
+	}
+
+	if (div_best_fit == 0)
+		return -EINVAL;
+
+	ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
+	ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
+	ctrl |= PM_BF(PLLCOUNT, 16);
+
+	if (clk->parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+
+	*pll_ctrl = ctrl;
+
+	return actual;
+}
+
+static unsigned long pll0_get_rate(struct clk *clk)
+{
+	u32 control;
+
+	control = pm_readl(PLL0);
+
+	return pll_get_rate(clk, control);
+}
+
+static void pll1_mode(struct clk *clk, int enabled)
+{
+	unsigned long timeout;
+	u32 status;
+	u32 ctrl;
+
+	ctrl = pm_readl(PLL1);
+
+	if (enabled) {
+		if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
+			pr_debug("clk %s: failed to enable, rate not set\n",
+					clk->name);
+			return;
+		}
+
+		ctrl |= PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+
+		/* Wait for PLL lock. */
+		for (timeout = 10000; timeout; timeout--) {
+			status = pm_readl(ISR);
+			if (status & PM_BIT(LOCK1))
+				break;
+			udelay(10);
+		}
+
+		if (!(status & PM_BIT(LOCK1)))
+			printk(KERN_ERR "clk %s: timeout waiting for lock\n",
+					clk->name);
+	} else {
+		ctrl &= ~PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+	}
+}
+
+static unsigned long pll1_get_rate(struct clk *clk)
+{
+	u32 control;
+
+	control = pm_readl(PLL1);
+
+	return pll_get_rate(clk, control);
+}
+
+static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 ctrl = 0;
+	unsigned long actual_rate;
+
+	actual_rate = pll_set_rate(clk, rate, &ctrl);
+
+	if (apply) {
+		if (actual_rate != rate)
+			return -EINVAL;
+		if (clk->users > 0)
+			return -EBUSY;
+		pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
+				clk->name, rate, actual_rate);
+		pm_writel(PLL1, ctrl);
+	}
+
+	return actual_rate;
+}
+
+static int pll1_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 ctrl;
+
+	if (clk->users > 0)
+		return -EBUSY;
+
+	ctrl = pm_readl(PLL1);
+	WARN_ON(ctrl & PM_BIT(PLLEN));
+
+	if (parent == &osc0)
+		ctrl &= ~PM_BIT(PLLOSC);
+	else if (parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+	else
+		return -EINVAL;
+
+	pm_writel(PLL1, ctrl);
+	clk->parent = parent;
+
+	return 0;
+}
+
+/*
+ * The AT32AP7000 has five primary clock sources: One 32kHz
+ * oscillator, two crystal oscillators and two PLLs.
+ */
+static struct clk osc32k = {
+	.name		= "osc32k",
+	.get_rate	= osc_get_rate,
+	.users		= 1,
+	.index		= 0,
+};
+static struct clk osc0 = {
+	.name		= "osc0",
+	.get_rate	= osc_get_rate,
+	.users		= 1,
+	.index		= 1,
+};
+static struct clk osc1 = {
+	.name		= "osc1",
+	.get_rate	= osc_get_rate,
+	.index		= 2,
+};
+static struct clk pll0 = {
+	.name		= "pll0",
+	.get_rate	= pll0_get_rate,
+	.parent		= &osc0,
+};
+static struct clk pll1 = {
+	.name		= "pll1",
+	.mode		= pll1_mode,
+	.get_rate	= pll1_get_rate,
+	.set_rate	= pll1_set_rate,
+	.set_parent	= pll1_set_parent,
+	.parent		= &osc0,
+};
+
+/*
+ * The main clock can be either osc0 or pll0.  The boot loader may
+ * have chosen one for us, so we don't really know which one until we
+ * have a look at the SM.
+ */
+static struct clk *main_clock;
+
+/*
+ * Synchronous clocks are generated from the main clock. The clocks
+ * must satisfy the constraint
+ *   fCPU >= fHSB >= fPB
+ * i.e. each clock must not be faster than its parent.
+ */
+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+{
+	return main_clock->get_rate(main_clock) >> shift;
+};
+
+static void cpu_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(CPU_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(CPU_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long cpu_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(CPUDIV))
+		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 control;
+	unsigned long parent_rate, child_div, actual_rate, div;
+
+	parent_rate = clk->parent->get_rate(clk->parent);
+	control = pm_readl(CKSEL);
+
+	if (control & PM_BIT(HSBDIV))
+		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+	else
+		child_div = 1;
+
+	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+		actual_rate = parent_rate;
+		control &= ~PM_BIT(CPUDIV);
+	} else {
+		unsigned int cpusel;
+		div = (parent_rate + rate / 2) / rate;
+		if (div > child_div)
+			div = child_div;
+		cpusel = (div > 1) ? (fls(div) - 2) : 0;
+		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+		actual_rate = parent_rate / (1 << (cpusel + 1));
+	}
+
+	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+			clk->name, rate, actual_rate);
+
+	if (apply)
+		pm_writel(CKSEL, control);
+
+	return actual_rate;
+}
+
+static void hsb_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(HSB_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(HSB_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long hsb_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(HSBDIV))
+		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+void pba_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(PBA_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(PBA_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+unsigned long pba_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(PBADIV))
+		shift = PM_BFEXT(PBASEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static void pbb_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(PBB_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(PBB_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long pbb_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(PBBDIV))
+		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static struct clk cpu_clk = {
+	.name		= "cpu",
+	.get_rate	= cpu_clk_get_rate,
+	.set_rate	= cpu_clk_set_rate,
+	.users		= 1,
+};
+static struct clk hsb_clk = {
+	.name		= "hsb",
+	.parent		= &cpu_clk,
+	.get_rate	= hsb_clk_get_rate,
+};
+static struct clk pba_clk = {
+	.name		= "pba",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 1,
+};
+static struct clk pbb_clk = {
+	.name		= "pbb",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 2,
+};
+
+/* --------------------------------------------------------------------
+ *  Generic Clock operations
+ * -------------------------------------------------------------------- */
+
+static void genclk_mode(struct clk *clk, int enabled)
+{
+	u32 control;
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (enabled)
+		control |= PM_BIT(CEN);
+	else
+		control &= ~PM_BIT(CEN);
+	pm_writel(GCCTRL(clk->index), control);
+}
+
+static unsigned long genclk_get_rate(struct clk *clk)
+{
+	u32 control;
+	unsigned long div = 1;
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (control & PM_BIT(DIVEN))
+		div = 2 * (PM_BFEXT(DIV, control) + 1);
+
+	return clk->parent->get_rate(clk->parent) / div;
+}
+
+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 control;
+	unsigned long parent_rate, actual_rate, div;
+
+	parent_rate = clk->parent->get_rate(clk->parent);
+	control = pm_readl(GCCTRL(clk->index));
+
+	if (rate > 3 * parent_rate / 4) {
+		actual_rate = parent_rate;
+		control &= ~PM_BIT(DIVEN);
+	} else {
+		div = (parent_rate + rate) / (2 * rate) - 1;
+		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+		actual_rate = parent_rate / (2 * (div + 1));
+	}
+
+	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+		clk->name, rate, actual_rate);
+
+	if (apply)
+		pm_writel(GCCTRL(clk->index), control);
+
+	return actual_rate;
+}
+
+int genclk_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 control;
+
+	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+		clk->name, parent->name, clk->parent->name);
+
+	control = pm_readl(GCCTRL(clk->index));
+
+	if (parent == &osc1 || parent == &pll1)
+		control |= PM_BIT(OSCSEL);
+	else if (parent == &osc0 || parent == &pll0)
+		control &= ~PM_BIT(OSCSEL);
+	else
+		return -EINVAL;
+
+	if (parent == &pll0 || parent == &pll1)
+		control |= PM_BIT(PLLSEL);
+	else
+		control &= ~PM_BIT(PLLSEL);
+
+	pm_writel(GCCTRL(clk->index), control);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static void __init genclk_init_parent(struct clk *clk)
+{
+	u32 control;
+	struct clk *parent;
+
+	BUG_ON(clk->index > 7);
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (control & PM_BIT(OSCSEL))
+		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+	else
+		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+
+	clk->parent = parent;
+}
+
+static struct dw_dma_platform_data dw_dmac0_data = {
+	.nr_channels	= 3,
+};
+
+static struct resource dw_dmac0_resource[] = {
+	PBMEM(0xff200000),
+	IRQ(2),
+};
+DEFINE_DEV_DATA(dw_dmac, 0);
+DEV_CLK(hclk, dw_dmac0, hsb, 10);
+
+/* --------------------------------------------------------------------
+ *  System peripherals
+ * -------------------------------------------------------------------- */
+static struct resource at32_pm0_resource[] = {
+	{
+		.start	= 0xfff00000,
+		.end	= 0xfff0007f,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(20),
+};
+
+static struct resource at32ap700x_rtc0_resource[] = {
+	{
+		.start	= 0xfff00080,
+		.end	= 0xfff000af,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(21),
+};
+
+static struct resource at32_wdt0_resource[] = {
+	{
+		.start	= 0xfff000b0,
+		.end	= 0xfff000cf,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource at32_eic0_resource[] = {
+	{
+		.start	= 0xfff00100,
+		.end	= 0xfff0013f,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(19),
+};
+
+DEFINE_DEV(at32_pm, 0);
+DEFINE_DEV(at32ap700x_rtc, 0);
+DEFINE_DEV(at32_wdt, 0);
+DEFINE_DEV(at32_eic, 0);
+
+/*
+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+ * is always running.
+ */
+static struct clk at32_pm_pclk = {
+	.name		= "pclk",
+	.dev		= &at32_pm0_device.dev,
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 0,
+};
+
+static struct resource intc0_resource[] = {
+	PBMEM(0xfff00400),
+};
+struct platform_device at32_intc0_device = {
+	.name		= "intc",
+	.id		= 0,
+	.resource	= intc0_resource,
+	.num_resources	= ARRAY_SIZE(intc0_resource),
+};
+DEV_CLK(pclk, at32_intc0, pbb, 1);
+
+static struct clk ebi_clk = {
+	.name		= "ebi",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.users		= 1,
+};
+static struct clk hramc_clk = {
+	.name		= "hramc",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.users		= 1,
+	.index		= 3,
+};
+static struct clk sdramc_clk = {
+	.name		= "sdramc_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 14,
+};
+
+static struct resource smc0_resource[] = {
+	PBMEM(0xfff03400),
+};
+DEFINE_DEV(smc, 0);
+DEV_CLK(pclk, smc0, pbb, 13);
+DEV_CLK(mck, smc0, hsb, 0);
+
+static struct platform_device pdc_device = {
+	.name		= "pdc",
+	.id		= 0,
+};
+DEV_CLK(hclk, pdc, hsb, 4);
+DEV_CLK(pclk, pdc, pba, 16);
+
+static struct clk pico_clk = {
+	.name		= "pico",
+	.parent		= &cpu_clk,
+	.mode		= cpu_clk_mode,
+	.get_rate	= cpu_clk_get_rate,
+	.users		= 1,
+};
+
+/* --------------------------------------------------------------------
+ * HMATRIX
+ * -------------------------------------------------------------------- */
+
+struct clk at32_hmatrix_clk = {
+	.name		= "hmatrix_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 2,
+	.users		= 1,
+};
+
+/*
+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
+ * External Bus Interface (EBI). This can be used to enable special
+ * features like CompactFlash support, NAND Flash support, etc. on
+ * certain chipselects.
+ */
+static inline void set_ebi_sfr_bits(u32 mask)
+{
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
+}
+
+/* --------------------------------------------------------------------
+ *  Timer/Counter (TC)
+ * -------------------------------------------------------------------- */
+
+static struct resource at32_tcb0_resource[] = {
+	PBMEM(0xfff00c00),
+	IRQ(22),
+};
+static struct platform_device at32_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= at32_tcb0_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb0_resource),
+};
+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
+
+static struct resource at32_tcb1_resource[] = {
+	PBMEM(0xfff01000),
+	IRQ(23),
+};
+static struct platform_device at32_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= at32_tcb1_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb1_resource),
+};
+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
+
+/* --------------------------------------------------------------------
+ *  PIO
+ * -------------------------------------------------------------------- */
+
+static struct resource pio0_resource[] = {
+	PBMEM(0xffe02800),
+	IRQ(13),
+};
+DEFINE_DEV(pio, 0);
+DEV_CLK(mck, pio0, pba, 10);
+
+static struct resource pio1_resource[] = {
+	PBMEM(0xffe02c00),
+	IRQ(14),
+};
+DEFINE_DEV(pio, 1);
+DEV_CLK(mck, pio1, pba, 11);
+
+static struct resource pio2_resource[] = {
+	PBMEM(0xffe03000),
+	IRQ(15),
+};
+DEFINE_DEV(pio, 2);
+DEV_CLK(mck, pio2, pba, 12);
+
+static struct resource pio3_resource[] = {
+	PBMEM(0xffe03400),
+	IRQ(16),
+};
+DEFINE_DEV(pio, 3);
+DEV_CLK(mck, pio3, pba, 13);
+
+static struct resource pio4_resource[] = {
+	PBMEM(0xffe03800),
+	IRQ(17),
+};
+DEFINE_DEV(pio, 4);
+DEV_CLK(mck, pio4, pba, 14);
+
+static int __init system_device_init(void)
+{
+	platform_device_register(&at32_pm0_device);
+	platform_device_register(&at32_intc0_device);
+	platform_device_register(&at32ap700x_rtc0_device);
+	platform_device_register(&at32_wdt0_device);
+	platform_device_register(&at32_eic0_device);
+	platform_device_register(&smc0_device);
+	platform_device_register(&pdc_device);
+	platform_device_register(&dw_dmac0_device);
+
+	platform_device_register(&at32_tcb0_device);
+	platform_device_register(&at32_tcb1_device);
+
+	platform_device_register(&pio0_device);
+	platform_device_register(&pio1_device);
+	platform_device_register(&pio2_device);
+	platform_device_register(&pio3_device);
+	platform_device_register(&pio4_device);
+
+	return 0;
+}
+core_initcall(system_device_init);
+
+/* --------------------------------------------------------------------
+ *  PSIF
+ * -------------------------------------------------------------------- */
+static struct resource atmel_psif0_resource[] __initdata = {
+	{
+		.start	= 0xffe03c00,
+		.end	= 0xffe03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif0_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+static struct resource atmel_psif1_resource[] __initdata = {
+	{
+		.start	= 0xffe03d00,
+		.end	= 0xffe03dff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif1_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+struct platform_device *__init at32_add_device_psif(unsigned int id)
+{
+	struct platform_device *pdev;
+	u32 pin_mask;
+
+	if (!(id == 0 || id == 1))
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_psif", id);
+	if (!pdev)
+		return NULL;
+
+	switch (id) {
+	case 0:
+		pin_mask  = (1 << 8) | (1 << 9); /* CLOCK & DATA */
+
+		if (platform_device_add_resources(pdev, atmel_psif0_resource,
+					ARRAY_SIZE(atmel_psif0_resource)))
+			goto err_add_resources;
+		atmel_psif0_pclk.dev = &pdev->dev;
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+		break;
+	case 1:
+		pin_mask  = (1 << 11) | (1 << 12); /* CLOCK & DATA */
+
+		if (platform_device_add_resources(pdev, atmel_psif1_resource,
+					ARRAY_SIZE(atmel_psif1_resource)))
+			goto err_add_resources;
+		atmel_psif1_pclk.dev = &pdev->dev;
+		select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  USART
+ * -------------------------------------------------------------------- */
+
+static struct atmel_uart_data atmel_usart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart0_resource[] = {
+	PBMEM(0xffe00c00),
+	IRQ(6),
+};
+DEFINE_DEV_DATA(atmel_usart, 0);
+DEV_CLK(usart, atmel_usart0, pba, 3);
+
+static struct atmel_uart_data atmel_usart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart1_resource[] = {
+	PBMEM(0xffe01000),
+	IRQ(7),
+};
+DEFINE_DEV_DATA(atmel_usart, 1);
+DEV_CLK(usart, atmel_usart1, pba, 4);
+
+static struct atmel_uart_data atmel_usart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart2_resource[] = {
+	PBMEM(0xffe01400),
+	IRQ(8),
+};
+DEFINE_DEV_DATA(atmel_usart, 2);
+DEV_CLK(usart, atmel_usart2, pba, 5);
+
+static struct atmel_uart_data atmel_usart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart3_resource[] = {
+	PBMEM(0xffe01800),
+	IRQ(9),
+};
+DEFINE_DEV_DATA(atmel_usart, 3);
+DEV_CLK(usart, atmel_usart3, pba, 6);
+
+static inline void configure_usart0_pins(int flags)
+{
+	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
+	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 6);
+	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 7);
+	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 10);
+
+	select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
+}
+
+static inline void configure_usart1_pins(int flags)
+{
+	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
+	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 19);
+	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 20);
+	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 16);
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
+}
+
+static inline void configure_usart2_pins(int flags)
+{
+	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
+	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 30);
+	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 29);
+	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 28);
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
+}
+
+static inline void configure_usart3_pins(int flags)
+{
+	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
+	if (flags & ATMEL_USART_RTS)	pin_mask |= (1 << 16);
+	if (flags & ATMEL_USART_CTS)	pin_mask |= (1 << 15);
+	if (flags & ATMEL_USART_CLK)	pin_mask |= (1 << 19);
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
+}
+
+static struct platform_device *__initdata at32_usarts[4];
+
+void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
+{
+	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
+
+	switch (hw_id) {
+	case 0:
+		pdev = &atmel_usart0_device;
+		configure_usart0_pins(flags);
+		break;
+	case 1:
+		pdev = &atmel_usart1_device;
+		configure_usart1_pins(flags);
+		break;
+	case 2:
+		pdev = &atmel_usart2_device;
+		configure_usart2_pins(flags);
+		break;
+	case 3:
+		pdev = &atmel_usart3_device;
+		configure_usart3_pins(flags);
+		break;
+	default:
+		return;
+	}
+
+	if (PXSEG(pdev->resource[0].start) == P4SEG) {
+		/* Addresses in the P4 segment are permanently mapped 1:1 */
+		struct atmel_uart_data *data = pdev->dev.platform_data;
+		data->regs = (void __iomem *)pdev->resource[0].start;
+	}
+
+	pdev->id = line;
+	pdata = pdev->dev.platform_data;
+	pdata->num = line;
+	at32_usarts[line] = pdev;
+}
+
+struct platform_device *__init at32_add_device_usart(unsigned int id)
+{
+	platform_device_register(at32_usarts[id]);
+	return at32_usarts[id];
+}
+
+void __init at32_setup_serial_console(unsigned int usart_id)
+{
+	atmel_default_console_device = at32_usarts[usart_id];
+}
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_CPU_AT32AP7000
+static struct macb_platform_data macb0_data;
+static struct resource macb0_resource[] = {
+	PBMEM(0xfff01800),
+	IRQ(25),
+};
+DEFINE_DEV_DATA(macb, 0);
+DEV_CLK(hclk, macb0, hsb, 8);
+DEV_CLK(pclk, macb0, pbb, 6);
+
+static struct macb_platform_data macb1_data;
+static struct resource macb1_resource[] = {
+	PBMEM(0xfff01c00),
+	IRQ(26),
+};
+DEFINE_DEV_DATA(macb, 1);
+DEV_CLK(hclk, macb1, hsb, 9);
+DEV_CLK(pclk, macb1, pbb, 7);
+
+struct platform_device *__init
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data)
+{
+	struct platform_device *pdev;
+	u32 pin_mask;
+
+	switch (id) {
+	case 0:
+		pdev = &macb0_device;
+
+		pin_mask  = (1 << 3);	/* TXD0 */
+		pin_mask |= (1 << 4);	/* TXD1 */
+		pin_mask |= (1 << 7);	/* TXEN */
+		pin_mask |= (1 << 8);	/* TXCK */
+		pin_mask |= (1 << 9);	/* RXD0 */
+		pin_mask |= (1 << 10);	/* RXD1 */
+		pin_mask |= (1 << 13);	/* RXER */
+		pin_mask |= (1 << 15);	/* RXDV */
+		pin_mask |= (1 << 16);	/* MDC  */
+		pin_mask |= (1 << 17);	/* MDIO */
+
+		if (!data->is_rmii) {
+			pin_mask |= (1 << 0);	/* COL  */
+			pin_mask |= (1 << 1);	/* CRS  */
+			pin_mask |= (1 << 2);	/* TXER */
+			pin_mask |= (1 << 5);	/* TXD2 */
+			pin_mask |= (1 << 6);	/* TXD3 */
+			pin_mask |= (1 << 11);	/* RXD2 */
+			pin_mask |= (1 << 12);	/* RXD3 */
+			pin_mask |= (1 << 14);	/* RXCK */
+#ifndef CONFIG_BOARD_MIMC200
+			pin_mask |= (1 << 18);	/* SPD  */
+#endif
+		}
+
+		select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
+
+		break;
+
+	case 1:
+		pdev = &macb1_device;
+
+		pin_mask  = (1 << 13);	/* TXD0 */
+		pin_mask |= (1 << 14);	/* TXD1 */
+		pin_mask |= (1 << 11);	/* TXEN */
+		pin_mask |= (1 << 12);	/* TXCK */
+		pin_mask |= (1 << 10);	/* RXD0 */
+		pin_mask |= (1 << 6);	/* RXD1 */
+		pin_mask |= (1 << 5);	/* RXER */
+		pin_mask |= (1 << 4);	/* RXDV */
+		pin_mask |= (1 << 3);	/* MDC  */
+		pin_mask |= (1 << 2);	/* MDIO */
+
+#ifndef CONFIG_BOARD_MIMC200
+		if (!data->is_rmii)
+			pin_mask |= (1 << 15);	/* SPD  */
+#endif
+
+		select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
+
+		if (!data->is_rmii) {
+			pin_mask  = (1 << 19);	/* COL  */
+			pin_mask |= (1 << 23);	/* CRS  */
+			pin_mask |= (1 << 26);	/* TXER */
+			pin_mask |= (1 << 27);	/* TXD2 */
+			pin_mask |= (1 << 28);	/* TXD3 */
+			pin_mask |= (1 << 29);	/* RXD2 */
+			pin_mask |= (1 << 30);	/* RXD3 */
+			pin_mask |= (1 << 24);	/* RXCK */
+
+			select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
+		}
+		break;
+
+	default:
+		return NULL;
+	}
+
+	memcpy(pdev->dev.platform_data, data, sizeof(struct macb_platform_data));
+	platform_device_register(pdev);
+
+	return pdev;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+static struct resource atmel_spi0_resource[] = {
+	PBMEM(0xffe00000),
+	IRQ(3),
+};
+DEFINE_DEV(atmel_spi, 0);
+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+
+static struct resource atmel_spi1_resource[] = {
+	PBMEM(0xffe00400),
+	IRQ(4),
+};
+DEFINE_DEV(atmel_spi, 1);
+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+
+void __init
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n)
+{
+	/*
+	 * Manage the chipselects as GPIOs, normally using the same pins
+	 * the SPI controller expects; but boards can use other pins.
+	 */
+	static u8 __initdata spi_pins[][4] = {
+		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+		  GPIO_PIN_PA(5), GPIO_PIN_PA(20) },
+		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+		  GPIO_PIN_PB(4), GPIO_PIN_PA(27) },
+	};
+	unsigned int pin, mode;
+
+	/* There are only 2 SPI controllers */
+	if (bus_num > 1)
+		return;
+
+	for (; n; n--, b++) {
+		b->bus_num = bus_num;
+		if (b->chip_select >= 4)
+			continue;
+		pin = (unsigned)b->controller_data;
+		if (!pin) {
+			pin = spi_pins[bus_num][b->chip_select];
+			b->controller_data = (void *)pin;
+		}
+		mode = AT32_GPIOF_OUTPUT;
+		if (!(b->mode & SPI_CS_HIGH))
+			mode |= AT32_GPIOF_HIGH;
+		at32_select_gpio(pin, mode);
+	}
+}
+
+struct platform_device *__init
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+{
+	struct platform_device *pdev;
+	u32 pin_mask;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_spi0_device;
+		pin_mask  = (1 << 1) | (1 << 2);	/* MOSI & SCK */
+
+		/* pullup MISO so a level is always defined */
+		select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+		at32_spi_setup_slaves(0, b, n);
+		break;
+
+	case 1:
+		pdev = &atmel_spi1_device;
+		pin_mask  = (1 << 1) | (1 << 5);	/* MOSI */
+
+		/* pullup MISO so a level is always defined */
+		select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+
+		at32_spi_setup_slaves(1, b, n);
+		break;
+
+	default:
+		return NULL;
+	}
+
+	spi_register_board_info(b, n);
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  TWI
+ * -------------------------------------------------------------------- */
+static struct resource atmel_twi0_resource[] __initdata = {
+	PBMEM(0xffe00800),
+	IRQ(5),
+};
+static struct clk atmel_twi0_pclk = {
+	.name		= "twi_pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 2,
+};
+
+struct platform_device *__init at32_add_device_twi(unsigned int id,
+						    struct i2c_board_info *b,
+						    unsigned int n)
+{
+	struct platform_device *pdev;
+	u32 pin_mask;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_twi", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_twi0_resource,
+				ARRAY_SIZE(atmel_twi0_resource)))
+		goto err_add_resources;
+
+	pin_mask  = (1 << 6) | (1 << 7);	/* SDA & SDL */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+	atmel_twi0_pclk.dev = &pdev->dev;
+
+	if (b)
+		i2c_register_board_info(id, b, n);
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * MMC
+ * -------------------------------------------------------------------- */
+static struct resource atmel_mci0_resource[] __initdata = {
+	PBMEM(0xfff02400),
+	IRQ(28),
+};
+static struct clk atmel_mci0_pclk = {
+	.name		= "mci_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 9,
+};
+
+struct platform_device *__init
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
+{
+	struct platform_device		*pdev;
+	struct mci_dma_data	        *slave;
+	u32				pioa_mask;
+	u32				piob_mask;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	/* Must have at least one usable slot */
+	if (!data->slot[0].bus_width && !data->slot[1].bus_width)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_mci", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, atmel_mci0_resource,
+				ARRAY_SIZE(atmel_mci0_resource)))
+		goto fail;
+
+	slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
+	if (!slave)
+		goto fail;
+
+	slave->sdata.dma_dev = &dw_dmac0_device.dev;
+	slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0)
+				| DWC_CFGH_DST_PER(1));
+	slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL
+				| DWC_CFGL_HS_SRC_POL);
+
+	data->dma_slave = slave;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct mci_platform_data)))
+		goto fail_free;
+
+	/* CLK line is common to both slots */
+	pioa_mask = 1 << 10;
+
+	switch (data->slot[0].bus_width) {
+	case 4:
+		pioa_mask |= 1 << 13;		/* DATA1 */
+		pioa_mask |= 1 << 14;		/* DATA2 */
+		pioa_mask |= 1 << 15;		/* DATA3 */
+		/* fall through */
+	case 1:
+		pioa_mask |= 1 << 11;		/* CMD	 */
+		pioa_mask |= 1 << 12;		/* DATA0 */
+
+		if (gpio_is_valid(data->slot[0].detect_pin))
+			at32_select_gpio(data->slot[0].detect_pin, 0);
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at32_select_gpio(data->slot[0].wp_pin, 0);
+		break;
+	case 0:
+		/* Slot is unused */
+		break;
+	default:
+		goto fail_free;
+	}
+
+	select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
+	piob_mask = 0;
+
+	switch (data->slot[1].bus_width) {
+	case 4:
+		piob_mask |= 1 <<  8;		/* DATA1 */
+		piob_mask |= 1 <<  9;		/* DATA2 */
+		piob_mask |= 1 << 10;		/* DATA3 */
+		/* fall through */
+	case 1:
+		piob_mask |= 1 <<  6;		/* CMD	 */
+		piob_mask |= 1 <<  7;		/* DATA0 */
+		select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
+
+		if (gpio_is_valid(data->slot[1].detect_pin))
+			at32_select_gpio(data->slot[1].detect_pin, 0);
+		if (gpio_is_valid(data->slot[1].wp_pin))
+			at32_select_gpio(data->slot[1].wp_pin, 0);
+		break;
+	case 0:
+		/* Slot is unused */
+		break;
+	default:
+		if (!data->slot[0].bus_width)
+			goto fail_free;
+
+		data->slot[1].bus_width = 0;
+		break;
+	}
+
+	atmel_mci0_pclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail_free:
+	kfree(slave);
+fail:
+	data->dma_slave = NULL;
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  LCDC
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+static struct atmel_lcdfb_info atmel_lcdfb0_data;
+static struct resource atmel_lcdfb0_resource[] = {
+	{
+		.start		= 0xff000000,
+		.end		= 0xff000fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	IRQ(1),
+	{
+		/* Placeholder for pre-allocated fb memory */
+		.start		= 0x00000000,
+		.end		= 0x00000000,
+		.flags		= 0,
+	},
+};
+DEFINE_DEV_DATA(atmel_lcdfb, 0);
+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+static struct clk atmel_lcdfb0_pixclk = {
+	.name		= "lcdc_clk",
+	.dev		= &atmel_lcdfb0_device.dev,
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 7,
+};
+
+struct platform_device *__init
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+		     unsigned long fbmem_start, unsigned long fbmem_len,
+		     u64 pin_mask)
+{
+	struct platform_device *pdev;
+	struct atmel_lcdfb_info *info;
+	struct fb_monspecs *monspecs;
+	struct fb_videomode *modedb;
+	unsigned int modedb_size;
+	u32 portc_mask, portd_mask, porte_mask;
+
+	/*
+	 * Do a deep copy of the fb data, monspecs and modedb. Make
+	 * sure all allocations are done before setting up the
+	 * portmux.
+	 */
+	monspecs = kmemdup(data->default_monspecs,
+			   sizeof(struct fb_monspecs), GFP_KERNEL);
+	if (!monspecs)
+		return NULL;
+
+	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+	if (!modedb)
+		goto err_dup_modedb;
+	monspecs->modedb = modedb;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_lcdfb0_device;
+
+		if (pin_mask == 0ULL)
+			/* Default to "full" lcdc control signals and 24bit */
+			pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
+
+		/* LCDC on port C */
+		portc_mask = pin_mask & 0xfff80000;
+		select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
+
+		/* LCDC on port D */
+		portd_mask = pin_mask & 0x0003ffff;
+		select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
+
+		/* LCDC on port E */
+		porte_mask = (pin_mask >> 32) & 0x0007ffff;
+		select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
+
+		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+		break;
+
+	default:
+		goto err_invalid_id;
+	}
+
+	if (fbmem_len) {
+		pdev->resource[2].start = fbmem_start;
+		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+		pdev->resource[2].flags = IORESOURCE_MEM;
+	}
+
+	info = pdev->dev.platform_data;
+	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+	info->default_monspecs = monspecs;
+
+	platform_device_register(pdev);
+	return pdev;
+
+err_invalid_id:
+	kfree(modedb);
+err_dup_modedb:
+	kfree(monspecs);
+	return NULL;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ *  PWM
+ * -------------------------------------------------------------------- */
+static struct resource atmel_pwm0_resource[] __initdata = {
+	PBMEM(0xfff01400),
+	IRQ(24),
+};
+static struct clk atmel_pwm0_mck = {
+	.name		= "pwm_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 5,
+};
+
+struct platform_device *__init at32_add_device_pwm(u32 mask)
+{
+	struct platform_device *pdev;
+	u32 pin_mask;
+
+	if (!mask)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_pwm", 0);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_pwm0_resource,
+				ARRAY_SIZE(atmel_pwm0_resource)))
+		goto out_free_pdev;
+
+	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
+		goto out_free_pdev;
+
+	pin_mask = 0;
+	if (mask & (1 << 0))
+		pin_mask |= (1 << 28);
+	if (mask & (1 << 1))
+		pin_mask |= (1 << 29);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+	pin_mask = 0;
+	if (mask & (1 << 2))
+		pin_mask |= (1 << 21);
+	if (mask & (1 << 3))
+		pin_mask |= (1 << 22);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+
+	atmel_pwm0_mck.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+
+	return pdev;
+
+out_free_pdev:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  SSC
+ * -------------------------------------------------------------------- */
+static struct resource ssc0_resource[] = {
+	PBMEM(0xffe01c00),
+	IRQ(10),
+};
+DEFINE_DEV(ssc, 0);
+DEV_CLK(pclk, ssc0, pba, 7);
+
+static struct resource ssc1_resource[] = {
+	PBMEM(0xffe02000),
+	IRQ(11),
+};
+DEFINE_DEV(ssc, 1);
+DEV_CLK(pclk, ssc1, pba, 8);
+
+static struct resource ssc2_resource[] = {
+	PBMEM(0xffe02400),
+	IRQ(12),
+};
+DEFINE_DEV(ssc, 2);
+DEV_CLK(pclk, ssc2, pba, 9);
+
+struct platform_device *__init
+at32_add_device_ssc(unsigned int id, unsigned int flags)
+{
+	struct platform_device *pdev;
+	u32 pin_mask = 0;
+
+	switch (id) {
+	case 0:
+		pdev = &ssc0_device;
+		if (flags & ATMEL_SSC_RF)
+			pin_mask |= (1 << 21);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			pin_mask |= (1 << 22);	/* RK */
+		if (flags & ATMEL_SSC_TK)
+			pin_mask |= (1 << 23);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			pin_mask |= (1 << 24);	/* TF */
+		if (flags & ATMEL_SSC_TD)
+			pin_mask |= (1 << 25);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			pin_mask |= (1 << 26);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+		break;
+	case 1:
+		pdev = &ssc1_device;
+		if (flags & ATMEL_SSC_RF)
+			pin_mask |= (1 << 0);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			pin_mask |= (1 << 1);	/* RK */
+		if (flags & ATMEL_SSC_TK)
+			pin_mask |= (1 << 2);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			pin_mask |= (1 << 3);	/* TF */
+		if (flags & ATMEL_SSC_TD)
+			pin_mask |= (1 << 4);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			pin_mask |= (1 << 5);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+
+		break;
+	case 2:
+		pdev = &ssc2_device;
+		if (flags & ATMEL_SSC_TD)
+			pin_mask |= (1 << 13);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			pin_mask |= (1 << 14);	/* RD */
+		if (flags & ATMEL_SSC_TK)
+			pin_mask |= (1 << 15);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			pin_mask |= (1 << 16);	/* TF */
+		if (flags & ATMEL_SSC_RF)
+			pin_mask |= (1 << 17);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			pin_mask |= (1 << 18);	/* RK */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  USB Device Controller
+ * -------------------------------------------------------------------- */
+static struct resource usba0_resource[] __initdata = {
+	{
+		.start		= 0xff300000,
+		.end		= 0xff3fffff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= 0xfff03000,
+		.end		= 0xfff033ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	IRQ(31),
+};
+static struct clk usba0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 12,
+};
+static struct clk usba0_hclk = {
+	.name		= "hclk",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.index		= 6,
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data at32_usba_ep[] __initdata = {
+	EP("ep0",     0,   64, 1, 0, 0),
+	EP("ep1",     1,  512, 2, 1, 1),
+	EP("ep2",     2,  512, 2, 1, 1),
+	EP("ep3-int", 3,   64, 3, 1, 0),
+	EP("ep4-int", 4,   64, 3, 1, 0),
+	EP("ep5",     5, 1024, 3, 1, 1),
+	EP("ep6",     6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+struct platform_device *__init
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+{
+	/*
+	 * pdata doesn't have room for any endpoints, so we need to
+	 * append room for the ones we need right after it.
+	 */
+	struct {
+		struct usba_platform_data pdata;
+		struct usba_ep_data ep[7];
+	} usba_data;
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_usba_udc", 0);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, usba0_resource,
+					  ARRAY_SIZE(usba0_resource)))
+		goto out_free_pdev;
+
+	if (data) {
+		usba_data.pdata.vbus_pin = data->vbus_pin;
+		usba_data.pdata.vbus_pin_inverted = data->vbus_pin_inverted;
+	} else {
+		usba_data.pdata.vbus_pin = -EINVAL;
+		usba_data.pdata.vbus_pin_inverted = -EINVAL;
+	}
+
+	data = &usba_data.pdata;
+	data->num_ep = ARRAY_SIZE(at32_usba_ep);
+	memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
+
+	if (platform_device_add_data(pdev, data, sizeof(usba_data)))
+		goto out_free_pdev;
+
+	if (gpio_is_valid(data->vbus_pin))
+		at32_select_gpio(data->vbus_pin, 0);
+
+	usba0_pclk.dev = &pdev->dev;
+	usba0_hclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+
+	return pdev;
+
+out_free_pdev:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * IDE / CompactFlash
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
+static struct resource at32_smc_cs4_resource[] __initdata = {
+	{
+		.start	= 0x04000000,
+		.end	= 0x07ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+static struct resource at32_smc_cs5_resource[] __initdata = {
+	{
+		.start	= 0x20000000,
+		.end	= 0x23ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+
+static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+		unsigned int cs, unsigned int extint)
+{
+	static unsigned int extint_pin_map[4] __initdata = {
+		(1 << 25),
+		(1 << 26),
+		(1 << 27),
+		(1 << 28),
+	};
+	static bool common_pins_initialized __initdata = false;
+	unsigned int extint_pin;
+	int ret;
+	u32 pin_mask;
+
+	if (extint >= ARRAY_SIZE(extint_pin_map))
+		return -EINVAL;
+	extint_pin = extint_pin_map[extint];
+
+	switch (cs) {
+	case 4:
+		ret = platform_device_add_resources(pdev,
+				at32_smc_cs4_resource,
+				ARRAY_SIZE(at32_smc_cs4_resource));
+		if (ret)
+			return ret;
+
+		/* NCS4   -> OE_N  */
+		select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
+		break;
+	case 5:
+		ret = platform_device_add_resources(pdev,
+				at32_smc_cs5_resource,
+				ARRAY_SIZE(at32_smc_cs5_resource));
+		if (ret)
+			return ret;
+
+		/* NCS5   -> OE_N  */
+		select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
+		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!common_pins_initialized) {
+		pin_mask  = (1 << 19);	/* CFCE1  -> CS0_N */
+		pin_mask |= (1 << 20);	/* CFCE2  -> CS1_N */
+		pin_mask |= (1 << 23);	/* CFRNW  -> DIR   */
+		pin_mask |= (1 << 24);	/* NWAIT  <- IORDY */
+
+		select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
+
+		common_pins_initialized = true;
+	}
+
+	select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
+
+	pdev->resource[1].start = EIM_IRQ_BASE + extint;
+	pdev->resource[1].end = pdev->resource[1].start;
+
+	return 0;
+}
+
+struct platform_device *__init
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc("at32_ide", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ide_platform_data)))
+		goto fail;
+
+	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+		goto fail;
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+struct platform_device *__init
+at32_add_device_cf(unsigned int id, unsigned int extint,
+		    struct cf_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc("at32_cf", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct cf_platform_data)))
+		goto fail;
+
+	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+		goto fail;
+
+	if (gpio_is_valid(data->detect_pin))
+		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
+	if (gpio_is_valid(data->reset_pin))
+		at32_select_gpio(data->reset_pin, 0);
+	if (gpio_is_valid(data->vcc_pin))
+		at32_select_gpio(data->vcc_pin, 0);
+	/* READY is used as extint, so we can't select it as gpio */
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+	{
+		.start	= 0x0c000000,
+		.end	= 0x0fffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xfff03c00,
+		.end	= 0xfff03fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_nand", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, smc_cs3_resource,
+				ARRAY_SIZE(smc_cs3_resource)))
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct atmel_nand_data)))
+		goto fail;
+
+	hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
+	if (data->enable_pin)
+		at32_select_gpio(data->enable_pin,
+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	if (data->rdy_pin)
+		at32_select_gpio(data->rdy_pin, 0);
+	if (data->det_pin)
+		at32_select_gpio(data->det_pin, 0);
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * AC97C
+ * -------------------------------------------------------------------- */
+static struct resource atmel_ac97c0_resource[] __initdata = {
+	PBMEM(0xfff02800),
+	IRQ(29),
+};
+static struct clk atmel_ac97c0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 10,
+};
+
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
+		      unsigned int flags)
+{
+	struct platform_device		*pdev;
+	struct dw_dma_slave		*rx_dws;
+	struct dw_dma_slave		*tx_dws;
+	struct ac97c_platform_data	_data;
+	u32				pin_mask;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_ac97c", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+				ARRAY_SIZE(atmel_ac97c0_resource)))
+		goto out_free_resources;
+
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct ac97c_platform_data));
+		data->reset_pin = -ENODEV;
+	}
+
+	rx_dws = &data->rx_dws;
+	tx_dws = &data->tx_dws;
+
+	/* Check if DMA slave interface for capture should be configured. */
+	if (flags & AC97C_CAPTURE) {
+		rx_dws->dma_dev = &dw_dmac0_device.dev;
+		rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
+		rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+		rx_dws->src_master = 0;
+		rx_dws->dst_master = 1;
+	}
+
+	/* Check if DMA slave interface for playback should be configured. */
+	if (flags & AC97C_PLAYBACK) {
+		tx_dws->dma_dev = &dw_dmac0_device.dev;
+		tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
+		tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+		tx_dws->src_master = 0;
+		tx_dws->dst_master = 1;
+	}
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ac97c_platform_data)))
+		goto out_free_resources;
+
+	/* SDO | SYNC | SCLK | SDI */
+	pin_mask = (1 << 20) | (1 << 21) | (1 << 22) | (1 << 23);
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+
+	if (gpio_is_valid(data->reset_pin))
+		at32_select_gpio(data->reset_pin, AT32_GPIOF_OUTPUT
+				| AT32_GPIOF_HIGH);
+
+	atmel_ac97c0_pclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+out_free_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * ABDAC
+ * -------------------------------------------------------------------- */
+static struct resource abdac0_resource[] __initdata = {
+	PBMEM(0xfff02000),
+	IRQ(27),
+};
+static struct clk abdac0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 8,
+};
+static struct clk abdac0_sample_clk = {
+	.name		= "sample_clk",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 6,
+};
+
+struct platform_device *__init
+at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data)
+{
+	struct platform_device	*pdev;
+	struct dw_dma_slave	*dws;
+	u32			pin_mask;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_abdac", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, abdac0_resource,
+				ARRAY_SIZE(abdac0_resource)))
+		goto out_free_resources;
+
+	dws = &data->dws;
+
+	dws->dma_dev = &dw_dmac0_device.dev;
+	dws->cfg_hi = DWC_CFGH_DST_PER(2);
+	dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+	dws->src_master = 0;
+	dws->dst_master = 1;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct atmel_abdac_pdata)))
+		goto out_free_resources;
+
+	pin_mask  = (1 << 20) | (1 << 22);	/* DATA1 & DATAN1 */
+	pin_mask |= (1 << 21) | (1 << 23);	/* DATA0 & DATAN0 */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+
+	abdac0_pclk.dev = &pdev->dev;
+	abdac0_sample_clk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+out_free_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  GCLK
+ * -------------------------------------------------------------------- */
+static struct clk gclk0 = {
+	.name		= "gclk0",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 0,
+};
+static struct clk gclk1 = {
+	.name		= "gclk1",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 1,
+};
+static struct clk gclk2 = {
+	.name		= "gclk2",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 2,
+};
+static struct clk gclk3 = {
+	.name		= "gclk3",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 3,
+};
+static struct clk gclk4 = {
+	.name		= "gclk4",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 4,
+};
+
+static __initdata struct clk *init_clocks[] = {
+	&osc32k,
+	&osc0,
+	&osc1,
+	&pll0,
+	&pll1,
+	&cpu_clk,
+	&hsb_clk,
+	&pba_clk,
+	&pbb_clk,
+	&at32_pm_pclk,
+	&at32_intc0_pclk,
+	&at32_hmatrix_clk,
+	&ebi_clk,
+	&hramc_clk,
+	&sdramc_clk,
+	&smc0_pclk,
+	&smc0_mck,
+	&pdc_hclk,
+	&pdc_pclk,
+	&dw_dmac0_hclk,
+	&pico_clk,
+	&pio0_mck,
+	&pio1_mck,
+	&pio2_mck,
+	&pio3_mck,
+	&pio4_mck,
+	&at32_tcb0_t0_clk,
+	&at32_tcb1_t0_clk,
+	&atmel_psif0_pclk,
+	&atmel_psif1_pclk,
+	&atmel_usart0_usart,
+	&atmel_usart1_usart,
+	&atmel_usart2_usart,
+	&atmel_usart3_usart,
+	&atmel_pwm0_mck,
+#if defined(CONFIG_CPU_AT32AP7000)
+	&macb0_hclk,
+	&macb0_pclk,
+	&macb1_hclk,
+	&macb1_pclk,
+#endif
+	&atmel_spi0_spi_clk,
+	&atmel_spi1_spi_clk,
+	&atmel_twi0_pclk,
+	&atmel_mci0_pclk,
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+	&atmel_lcdfb0_hck1,
+	&atmel_lcdfb0_pixclk,
+#endif
+	&ssc0_pclk,
+	&ssc1_pclk,
+	&ssc2_pclk,
+	&usba0_hclk,
+	&usba0_pclk,
+	&atmel_ac97c0_pclk,
+	&abdac0_pclk,
+	&abdac0_sample_clk,
+	&gclk0,
+	&gclk1,
+	&gclk2,
+	&gclk3,
+	&gclk4,
+};
+
+void __init setup_platform(void)
+{
+	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+	int i;
+
+	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+		main_clock = &pll0;
+		cpu_clk.parent = &pll0;
+	} else {
+		main_clock = &osc0;
+		cpu_clk.parent = &osc0;
+	}
+
+	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+		pll0.parent = &osc1;
+	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+		pll1.parent = &osc1;
+
+	genclk_init_parent(&gclk0);
+	genclk_init_parent(&gclk1);
+	genclk_init_parent(&gclk2);
+	genclk_init_parent(&gclk3);
+	genclk_init_parent(&gclk4);
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+	genclk_init_parent(&atmel_lcdfb0_pixclk);
+#endif
+	genclk_init_parent(&abdac0_sample_clk);
+
+	/*
+	 * Build initial dynamic clock list by registering all clocks
+	 * from the array.
+	 * At the same time, turn on all clocks that have at least one
+	 * user already, and turn off everything else. We only do this
+	 * for module clocks, and even though it isn't particularly
+	 * pretty to  check the address of the mode function, it should
+	 * do the trick...
+	 */
+	for (i = 0; i < ARRAY_SIZE(init_clocks); i++) {
+		struct clk *clk = init_clocks[i];
+
+		/* first, register clock */
+		at32_clk_register(clk);
+
+		if (clk->users == 0)
+			continue;
+
+		if (clk->mode == &cpu_clk_mode)
+			cpu_mask |= 1 << clk->index;
+		else if (clk->mode == &hsb_clk_mode)
+			hsb_mask |= 1 << clk->index;
+		else if (clk->mode == &pba_clk_mode)
+			pba_mask |= 1 << clk->index;
+		else if (clk->mode == &pbb_clk_mode)
+			pbb_mask |= 1 << clk->index;
+	}
+
+	pm_writel(CPU_MASK, cpu_mask);
+	pm_writel(HSB_MASK, hsb_mask);
+	pm_writel(PBA_MASK, pba_mask);
+	pm_writel(PBB_MASK, pbb_mask);
+
+	/* Initialize the port muxes */
+	at32_init_pio(&pio0_device);
+	at32_init_pio(&pio1_device);
+	at32_init_pio(&pio2_device);
+	at32_init_pio(&pio3_device);
+	at32_init_pio(&pio4_device);
+}
+
+struct gen_pool *sram_pool;
+
+static int __init sram_init(void)
+{
+	struct gen_pool *pool;
+
+	/* 1KiB granularity */
+	pool = gen_pool_create(10, -1);
+	if (!pool)
+		goto fail;
+
+	if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
+		goto err_pool_add;
+
+	sram_pool = pool;
+	return 0;
+
+err_pool_add:
+	gen_pool_destroy(pool);
+fail:
+	pr_err("Failed to create SRAM pool\n");
+	return -ENOMEM;
+}
+core_initcall(sram_init);
-- 
cgit